Issue with a bex report filters

the report which is filtered to display cost elements of a category D is working but the requirement is that one cost element called 800 gets the planned data from a category called C. we need to keep the filter for D in the report but still display the data for cost element 800 as well. All it means is that when ever the cost element 800 appears it not only pulls the data from D which as actual values but also from C where the planned values also exists.

Hi,
Once again refresh your report with including selection of D with 800 cost element, and remaining all exclude from selection(if it is less number).
Regards
Pcrao.

Similar Messages

Issue with Exceptions in Reporting

Hi BW Gurus,
            I am still new to BW, Like I have a issue with exceptions in reporting.
            Let me explain clearly, I created a report which gives me two MRP values they are for example V1 and PD(there other MRP types but I am focusing only this two). Here I can see in my report those two values and the overall result of all MRP types (they are 6 different types). My report looks like this for examply
   V1                  46,782,434(this are rough figures)
   PD                  56,232,453
   Overall Result      102,434,111
        Here my requirement is I need to find this overall result like accroding to thresold values this overall result shows RED,YELLOW,GREEN.
        I have given threshold values in exceptions. like
   0           -
> 45,000,000(Red)
   45,000,001 -
> 65,000,000 (Yellow)
   65,000,001 -
> 500,000,000 (Green)
       But according to this values I should get Red( Overall Result), I cant see any change in the overall result.
       Please can some one give advice how to reflect this threshold values in my report.Or I have to select any other options in exceptions.
       Thanks in advance.
Regds
Sam

Not really possible with BEx functions, but if you provide a workbook to users you can just type in this information in a non-Bex cell and save the workbook.
Else you can try to name your exception such that it shows the value ranges. Then in the report, from the toolbar Layout > Display Exceptions.
Hope this helps...

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Issue with applying Event Action filters

Dear friends,
A general question on Event Action filters. There is a signature with sig ID 6257.
The following is the event action filter configuration:
service event-action-rules rules0
filters edit DHCP
signature-id-range 6257
subsignature-id-range 0
attacker-address-range 172.20.20.10,172.20.20.11
actions-to-remove produce-alert
filter-item-status Enabled
stop-on-match True
os-relevance not-relevant
exit
Even though a valid DHCP offer is being given by the DHCP server, this alert is getting fired.
We have even excluded the IP's of the DHCP Servers - 172.20.20.10 and 172.20.20.11 from the Attacker Address range parameter in the signature but still this alert gets fired.
evIdsAlert: eventId=1204853641442197329 vendor=Cisco severity=low
originator:
hostId: IDSM2Core1
appName: sensorApp
appInstanceId: 592
time: April 7, 2008 5:46:48 AM UTC offset=180 timeZone=1
signature: description=DHCP Client DoS id=6257 version=S316
subsigId: 0
sigDetails: Server Offered a Malicious IP Address
marsCategory: DoS/Host
interfaceGroup: vs0
vlan: 200
participants:
attacker:
addr: 172.20.20.10 locality=OUT
port: 0
target:
addr: 10.1.1.78 locality=OUT
port: 0
os: idSource=unknown type=unknown relevance=unknown
summary: 4 final=true initialAlert=1204853641442197267 summaryType=Regular
alertDetails: Regular Summary: 4 events this interval ;
riskRatingValue: 25 targetValueRating=medium
threatRatingValue: 25
interface: ge0_7
protocol: udp
Looking forward to your kind help and advise on this.
Thanks a lot
Gautam

Some things to check:
1) Is the filter in the active list? Filters can be enabled or disabled, but they can also be active ro inactive. You've only show a part of your configuration so I can't tell if the filter is part of the active list.
2) Are there actions other than produce-alert for the signature? Or is an event action override adding other actions?
Produce-alert is not the only action that can cause an alert to be generated. The produce-verbose-alert, request-snmp-trap, log-attacker-packets, log-victim-packet, and log-pair-packets will also cause alerts to be generated. Modify the filter to also remove these actions.
3) The alert you've shown is a Summary Alert. There may be an issue with Summarization and the Filters. Try modifying the signature to set it to FireAll with no summarization.
4) If you have multiple filters then check the order of the filters. If the event is matching an earlier filter where the stop-on-match is set to True, then it will not check the event against this filter. Either move this filter up higher in the filter list, or change earlier filters to be "stop-on-match false".
5) Also check to see if you are running the latest 5.1(7) or 6.0(4) Service pack. If running earlier 5.1 or 6.0 versions you might be hitting a bug that could have already been fixed.
If none of the above help, then contact the TAC. It could be that you may have foung a bug that the sensor development team is unaware of.
To help in identifying the problem take a packet capture of the packets from 172.20.20.10 for several minutes around the time when the sensor is generating these alerts.
This way the team can both check if the signature is firing correctly, and if the filters are working correctly for that signature.

Hierarchy issue with Web Intelligence Report

Hi All,
We are facing an issue with OLAP Universe where we are using hierarchy for cost center in reports.
BEx query shows correct data in RSRT with hierarchy nodes.
We have built a Universe on top of this BEx Query.
We are using couple of nodes of cost enter hierarchy in WebI report but if we keep more than one node in WebI query, data comes double (probably because of duplicate rows). Instead if I keep just one of the node in WebI query, WebI report returns correct data.
Please suggest, why such behavior with OLAP universe and how to resolve this?
Best Regards,
Ashish

Thanks for your suggestions.
I am little confused on how to check SQL generated for OLAP WebI Query.
But other reports on same universe behave same way and I'll give a try to another universe but I don't expect it to behave in different way. I saw a setting for relational Universes like restriction on duplicate rows but the same is not present in case of OLAP Universe.
Do you know how WebI behaves with BEx hierarchies?
There has to be some setting to make it work...
Best Regards,
Ashish

Strange Issue with Guided Nav and filters

Hi All,
I am have a very strange issue with the guided navigation.
I created an answer in BI and when I look at 'Display Results' in Answers everything shows up fine.
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= current_date-1) AND (LU_ACCOUNT.TERMMATDATE <= current_date+89)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
But when I link to this answer via guided navigation the filter seems to change??
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (LU_PRODUCT.MAJOR = 'CML') AND (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1) AND (LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Dashboard=/users/administrator/_portal
Dashboard Page=Loans Maturing
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
I am just it is going to the same report. Any ideas on why this is happening??
Thanks

Yes,
these are simply two different reports, as you can see from the filters...

Issue with printing lockbox report

Hi,
My lockbox report after processing file is giving the total amount and check amount correctly but when I print the same report, the figures don't match with the correct report figures for check amount and advice total.
Please help....
Thanks,
Sheel
Edited by: Sheel Ahuja on May 19, 2010 11:11 PM

Hello,
Please, open a message for SAP on the OSS Marketplace. There are some notes for this type of issue, but they are currently in pilot release.
So, open a message describing the issue and providing a reproducible example in your system.
REgards,
REnan

Issue with CRS Historical report scheduler

Hello guys,
I have a customer with ipccx 5.02 .
THe customer could execute manual reports but the scheduler reports doesnt work.
I follow the IPCCX troubleshooting guide :
1.Stop and start scheduler service.
2. Connectivity is fine.
I dont receivce any error from CRS client , i need little help im new in IPCC world?
Any suggestions please?
Thanks,
Carlos

Hi Anubhati,
PC is logged during the time that scheduled is programming and also is not in sleep mode.
I have download the CiscoSch log from CRS Historical report and i found i issue with license :
INFORMATIONAL Jan 19 2011|17:00:45 Authenticate [email protected]@default user on Application Server 10.181.55.247
104 ERROR Jan 19 2011|17:00:45 Getting of total available license info failed
105 ERROR Jan 19 2011|17:00:45 Historical Reporting Licenses Available(=0); Report cannot be generated.
I have the following license :
UCCX enhanced
IVR ports 150
Enhanced seat 22
CCX Maximum agents 300.
I generated a report for see how many agents is logged in = 15 .
Regards,
Carlos

Issue with exporting Financial Report in Smartview 11.1.2.2

If I export a FR in "Export in query Mode" , it concatenates the parent with the child (parent.child) and does not return anything in Smartview. Even though the report works fine in workspace.
I narrowed down the issue and it seems if I use Stored member roll up instead of using Shared member roll up it returns the right data when I export the report in Smartview.
So the issue is only with the FR using Shared members.
Does anyone know if this is a known issue or can replicate this in their environment ? We are on version 11.1.2.2
Thanks

Nope that didn't work, but I figured out the error. I was running the command on a client machine. When I run the command on the server itself, it works fine.. well, now I have issues with my POVs, but at least it's finding my .csc file.
Thanks for your help John.

Issues with BI publisher report in dashboard

Hello all,
I got some issues about BI publisher reports in a dashboard.
I use a dashboard prompt in combination with a BIP report.
1.) I don't want to see the publisher control bar in my dashboard. Now you can't view the report anymore after using the dashboard prompt. Because it says you have to press the view button which is on the publisher control bar.
So when I add the bar. Then I have first to press on go in the dashboard prompt and after that I have to press on view in the publisher control bar.
2.) When I open my dashboard I see a scroll bar in my BIP report. Now when I use the dashboard prompt, it disappears. So I can't view the entire report anymore
3.) I like to develop in english, but the test must be in dutch. Now I have a english dashboard with a dutch control bar. Also logging in to BIP in english and then navigating to analytics will not help.
4.) I can't use I-bots on BI publisher reports, or can I?
5.) This is not really an issue, but more like a problem but I want that users can view the BIP report on the dashboard only in HTML, but I want that they only can export to excel, is this possible?
Hoping for some answers ;)
Thanks in advance!
Message was edited by:
Remc0

Hi Venkat,
Thanks for your quick respond.
1.) Auto Run is enabled. And the report runs automatically as well. But then it ignores the dashboard prompt (as a regular report would do as well). But when I choose some values in the prompt and then press go. Then it says I have to press on view as well.
2.) no that is not the case. My report is so big that it always need a scroll bar ;) also adjusting the size settings in the dashboard doesn't help. The only occurs when viewing in HTML, when previewing in excel or RTF it all just work fine.
3.) true, but ow well this is the least importetant one ;) so if this doesn't work, than it doesn't work ;)
4.) Ok, I will have a look on that.
5.) I did enabled HTML and EXCEL outputs in my BIP report. But when the first point is working, then I don't want to see the control bar anymore and I want to have the output on the dashboard in HTML and then I want to build a button, or a link or something that exports the request to excel. Is that possible?

Issues with signal input adaptive filtering, it won't filter the added noise from the input waveform

Hello,
I have an issue with my adaptive noise cancellation program. Essentially I want to input a custom wav add noise to it and then filter the noise away in order to gain the custom wav again.
While doing so I want to read the learning curve and read the adaptive coefficients. Unfortunately I have an issue when it comes to the filtering of the custom wav+noise. It won't filter the signal at all.
It would be helpful if someone could have a look at it and possibly help me out.
Thanks!
Attachments:
Testing.vi ‏59 KB

Hey Jan,
Thanks for the reply. I am currently using the Adaptive Filter Toolkit in order to obtain those VIs. The VIs which are in use are the LMS Adaptive Filter ones.
I figured there might be an error with the input of the array. This VI requires a DBL Array but it seems like it can not process it.
The "Get Wavefirn Components" works better now but I still have an issue with a time. I put a 9s wav file in but it only computes it in a very short time and I can not play the file while it is computing.
I added the modified program to the attachments.
This program is ought to read a waveform file add noise to it and then use an adaptive filter in order to get the orginal waveform back again and if possible either store or play the final waveform.
Thanks for your help.
Attachments:
Testing.vi ‏62 KB

Issue with execution of report

Hi,
I have an issue when the report is running. It is taking long time to run.
The scenario is that We used Plant in selection screen initially and there were no issues in execution of the report.
As per the business process, the plant has to be replaced with another info object zobject_0plant. Zobject is a customized infoobject and 0plant is the navigational attribute of zobject.
The report is running good without the selection of Zobject_0plant.
When this zobject_0plant is selected in variable screen, the report is taking long time to execute.
Please help me to resolve this issue.
Thanks in advance.

Hi... as per your issue
First note: Check the master data tds rates were maintained or not . and the new rates were updated in all the vendor master data or not
In EWT a field called business place is playing major roll. Please check that all the transactions should have business place. if some transactions do not have business place than it will not consider for challan posting.
1. Post invoice with TDS (importantly update the business place and section code)
2. Run J1INCHLN for monthly remittance to Govt.
3. Update J1INBANK for back challan updatation
Note : checked the table with_item and the bseg,bkpf tables.basically the j1incert picks/parses data from the with_item table(the program fetches all the data from bkpf and checks with with_item table and does some filtering and its shown in the certificate print)
4. Run J1INCERT to print the TDS Certificates
Note: Finally just look into your J1INCERT entering parameters screen, the problem lies in the paramaters most probably in dates only assuming all the required configuration has been correctly done
Also Please change the assigned form J_1IEWT_CERT to J_1IEWT_CERT_N
I hope it will helps you...please confirm
Regards
vamsi

Issues with YTD in Report

In the sample below you will see a rolling 8 week, (Current Week and last 7 weeks).
I would like to have LYTD and YTD columns for all my side measures (Measure 1 , 2 etc. (6 of them) As well the LYTD and YTD, will be from my fiscal year Nov 01 to the Current Week.
a) First Issue, I created a time series (TODATE) in RPD for Measure 1 but when I place it on my pivot, it filters the TODATE with the 8 week filter I placed on my report that I used to capture the rolling 8 weeks. Is there a way to do a TODATE that will calculate from my Fiscal start of Nov 1 to the current week? Maybe TODATE is not the method I need.
b)Second issue, I created another TODATE for Measure 2 and when I drag the column on, it moves to the right of Measure one TODATE, but I would like it all in one column like the sample "Goal". not sure how to organize the pivot to do such a thing.
Any help is greatly appreciated.
Thank you
http://i1289.photobucket.com/albums/b511/antexity/YTDLYTD_zpsce95a547.png
Edited by: antexity1 on May 23, 2013 4:04 PM

Thanks for your reply,
I get the following syntax error ([nQSError: 27002] Near <(>: Syntax error [nQSError: 26012]) for the below formula I created. Could you see if I am missing something?
CASE WHEN "Enterprise_Data_Warehouse"."Dim - Date Time Trans GL Hierarchy"."Date" between TO_DATE('01-NOV-'||to_char(to_number("Enterprise_Data_Warehouse"."Dim - Date Time Trans GL Hierarchy"."Fiscal Year" (sysdate))-1),'DD-MON-YYYY') AND sysdate THEN "Enterprise_Data_Warehouse"."Fact - Shop Floor"."(TT) Efficiency %" ELSE 0 END
Thank you!

Issue with SAP BW Report Iview

Hi,
The issue stands with the context menu(right click menu)
I have created a BI Query and generated a BW Report with the Web Designer Wizard.
When I run the generated URL it is working fine, with the context menu also working perfectly.
However when I use that report in SAP BW Report Iview, the report gets opened perfectly but the context menu is taking me to a new page with those options.
As of now i do not know of any setting for context menu specially.
If anyone can help me or if anyone has encountered this error before, pl. let me know the solution.

Atul -- i am running into simillar issue. Please let me know if you found a solution for this.
Hi all -
When i create a BW Report iView 7.x in EP 6.0, the second level context menu doesn't appear for the template. Please let me know if this can be fixed.
Thanks
PR

Red Blue issue with published DeskI Report in InfoView

Hi everyone,
i'm expieriencing a strange behaviour with my published DeskI Reports.
I'm using logos in my report and they work just fine... in my full client. As soon as I publish them to InfoView and open them up in the browser, then somehow the color red and blue interchange. Red becomes blue and vice versa...
My System consists of:
BOE R 3.1 SP2
Win Server 2008
DeskI and WebI
Has anyone expirienced the same issues?
Thanks and kr,
Nils

Hi Stratos,
so far everything is just fine. Hope you are doing great too.
my IE version is: 7.0.5730.13
Tomcat version: 5.5.20
If I click on the logos in InfoView, nothing happens.
I tested 3 different ways to implement them:
1) via link; pictures shows up, but again with the red blue issue
2) as an object; pictures shows up; also w/ the red blue issue
3) inserted a cell, and pasted the picture in it, pictures shows up; also w/ the red blue issue
The strange thing is, that this issue only appears in the browser.
Thanks,
Nils

Issue with a bex report filters

Similar Messages

Maybe you are looking for