Issue with a GTX 750m / Dell xps laptop

I can't get Mercury engine to work with premiere pro CC 2014.
What did I do wrong ?

firippusan wrote:
I don't think this possible, if you have two video cards and only want to use the nvidia, you need to have a possibility to disable the intel in your bios.
If this is not possible, then first install the intel driver, then Bumblebee and 'friends'
I overlooked that issue. It seems under ubuntu both cards are used together and it works automagically without bumblebee. I was hoping to achieve the same on arch,
given bumblebee's wiki says: "Warning: Bumblebee is still under heavy development! But your help is very welcome."
All Bumblebee is under heavy development, true, but no reason to not install it, I mean Arch is under heavy development too....
As for Ubuntu, I don't use it, and have no plans to do so, but tell me, how are they putting it together?
Just open the Bumblebee wiki, read carefully, and install it.
Take extra care with nvidia, you then need to reinstall Intel too.
Basically as advised in the install guide:
pacman -S xorg-server xorg-server-utils xorg-xinit
pacman -S xorg-twm xorg-xclock xterm
I wanted to know if you installed the Xorg group, but you did it the right way.

Similar Messages

[Solved] xorg stuck in tty1 with nouveau driver on dell xps laptop

hi all, struggling with xorg on dell xps with nouveau driver.
Nouveau works under ubuntu LTS so no hardware problem.
Followed the arch wiki for installation and all related links (nouveau, xorg etc.)
startx (and startxfce4): it seems like xserver has started but I'm stuck
in tty1 still seeing the text output of the command; ctrl-c doesn't work and I need to log into tty2 to be able to kill the xserver.
Had to create an Xorg.conf with Xorg :0 -configure (else xserver couldn't start with fatal error screen not found).
Xorg.log.0 shows no EE errors.
Tried all the tricks read on the wiki, e.g. downgraded the kernel, deleted ~/.xinitrc, deleted xorg.conf (also tried
a minimal xorg.conf with only the screen section), blacklisted modules i915 and intel_agp, checked there's no vga=
options in my bootloader. Tried some other tricks found on forum posts to no avail.
Any suggestions highly appreciated.
lspci:
http://pastebin.com/uuGEJL0D
dmesg:
http://pastebin.com/8WVPp2ZB
xorg.conf:
http://pastebin.com/SgbNX9Wn
Xorg.log.0:
http://pastebin.com/8yH2zUHq
Last edited by firippusan (2013-08-30 12:38:11)

firippusan wrote:
I don't think this possible, if you have two video cards and only want to use the nvidia, you need to have a possibility to disable the intel in your bios.
If this is not possible, then first install the intel driver, then Bumblebee and 'friends'
I overlooked that issue. It seems under ubuntu both cards are used together and it works automagically without bumblebee. I was hoping to achieve the same on arch,
given bumblebee's wiki says: "Warning: Bumblebee is still under heavy development! But your help is very welcome."
All Bumblebee is under heavy development, true, but no reason to not install it, I mean Arch is under heavy development too....
As for Ubuntu, I don't use it, and have no plans to do so, but tell me, how are they putting it together?
Just open the Bumblebee wiki, read carefully, and install it.
Take extra care with nvidia, you then need to reinstall Intel too.
Basically as advised in the install guide:
pacman -S xorg-server xorg-server-utils xorg-xinit
pacman -S xorg-twm xorg-xclock xterm
I wanted to know if you installed the Xorg group, but you did it the right way.

Dell XPS Laptop Touch Screen Inputs Interpreted as Panning Photoshop CS6

I have been working with Adobe Illustrator for a little while now and decided that I would like to try Photoshop for digital art. I downloaded the 30 day trial version of Adobe Illustrator CS 6 about three days ago and noticed immediately that touching my laptop’s touch screen will only allow me to pan using the Hand Tool in Photoshop. I have never had this problem in Adobe Illustrator, as using the touch screen acts just as if I were clicking the left mouse button and dragging the cursor around the screen. I have a Dell XPS 15 - L502X laptop with an integrated touch screen (the entire 15” screen is Multi-touch sensitive). It is running N-Trig DuoSense Digitizer with the latest drivers. Is there some simple setting change that can be done within Photoshop CS6 to make it recognize a touch screen input as a normal left click and thus allow me to draw on it using the pen, pencil, or paintbrush tool? I find it quite odd that I have no problems with this in Illustrator CS6. Could it be that this tablet-like touch screen input is restricted on the trial version? I am interested in buying Photoshop so I can use it whenever I’d like for longer than the 30 day trial allows, but I certainly don’t want to buy it if I cannot use my stylus on the touch screen to draw. Any help is much appreciated!
Here is a link to a youtube video that I put up showing the problem. The first program shown in the video is Adobe Illustrator CS6 using the Paintbrush tool. The second program shown is Adobe Photosop CS6 using the pencil tool. I draw the line in Ps using the mouse pad and then attempt to draw (still using the pencil tool) on the touch screen yielding only scrolling with the hand tool. http://www.youtube.com/watch?v=Zd1NOBway4o
Uhhh yah. Here's my system specs copy pasted right from PhotoShop.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 8086 MB
Free memory: 4677 MB
Memory available to Photoshop: 7156 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 540M/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 2
Video Card: Intel(R) HD Graphics Family
OpenCL Unavailable
Driver Version: 8.15.10.2455
Driver Date: 20110719000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics Family
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: NVIDIA GeForce GT 540M
OpenCL Unavailable
Driver Version: 8.17.12.8577
Driver Date: 20111103000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GT 540M
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Ryan\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 911.9G, 762.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Maximum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mean 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Median 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mezzotint 13.0
   Minimum 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Pinch 13.0
   Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Range 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0.1
   Shear 13.0
   Skewness 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Sumi-e 13.0
   Summation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

I have this exact same problem, though I have a touchscreen monitor for my PC rather than a laptop. This is a bit awkward, but until I find a real solution, this works just fine: when you want to use the touch screen for CS6, hold down the mouse button. You may have to use the mouse to tap the tools you want, but at least there's a temporary solution.

ImageFORMULA P-215 Scan-tini Software Issues with Windows 8.1 32-Bit Laptop

Hi,,
I have a ImageFORMULA P-215 Scan-tini scanner which worked without any problems with my Lenovo X230 laptop running Windows 7 64-bit. However, I have been unable to get the CaptureOn Touch software to work on my Asus Transformer TA100T notebook running Windows 8.1 32-bit. The software and driver installation completed without any errors (without the scanner connected). But when I connect the scanner into the USB port and run the Capture On Touch software, it always comes up with a Microsoft Visual C++ runtime library error - Program C:\Program Files\Canon Electronics\P215\TouchDR.exe abnormal program termination.
I tried every possible troubleshooting approaches I could Google online including (1) doing running sfc /scannow (which found no integrity or corruption issues with my Win 8.1 system, (2) did a clean reboot disabling everything except the CaptureOn Touch software and it still comes up with the same error, (3) installing Visual C++ runtime library distributables for 2005, 2008, 2010, 2012, 2013 but still the error pops up. So basically, now I can't use this great little portable scanner with my great little transformer tablet/notebook.
I am wondering whether anyone else have come across a similar problem of getting this scanner to work on a 32-bit Win 8.1 system? Would greatly appreciate any advise.

Hi:
I would try the Vista audio driver from your notebook's support and driver page.
the dv6000 model series is not supported by HP for W7 let alone W8 or 8.1.

Z77A-GD65 issues with Geforce GTX 780 Video Card

Hey Guys,
I have a issue with a new PC build.
I think it may be a driver or BIOS setting issue, I hope
I bought a MSI Z77A-GD65 motherboard and below are the specs:
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8
- Balistix Sport 8GB sticks (Total of 24 GB memory installed)
- Kentek 875w power supply
- Geforce GTX 780 Graphics Card
My problem is with the Geforce GTX 780 video card, I installed a fresh install of Windows 7 64 bit and
everything runs and works fine,but when i install the Geforce GTX 780 video card and install the
drivers its all good up to this point but when i restart the computer i get this message in the device
manager ""Windows has stopped this device because it has reported problems (code 43)"
I have installed different versions of the driver, a few older and few newer versions with the same
outcome.
I tried to flash the BIOS to the latest version 10.11 but had problems with it picking up my harddrive
after it flashed successfully. I even checked the boot up setting and it all looked good just would not
boot up, so i had to revert back to the v10.8 BIOS version for it to work.
I'm not sure if there is a setting in the BIOS that i need to turn on or off. I'm not familar with this BIOS,
is there a place in it so i can see if the BIOS is picking up the video card, it has to or Windows would
not see it right?
I'm stumped here, do you guys know of a Geforce driver version that works well with this video card?
I truely think the card is fine because when i install the card to the motherboard i dont get any weird
issues until the driver is installed and Windows is restarted.
I would greatly appreciate any help and advise that you guys can give me.
Thanks alot

UPDATE
Well i wanted to post an update on my new build issue.
Here are my specs:
I bought a MSI Z77A-GD65 motherboard with BIOS v10.8
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8 (i had a issue with the newest BIOS flash v10.11 it wouldn't detect the harddrive, could figure that one out so i went back to v10.8)
- Balistix Sport 8GB sticks (Total of 32 GB memory installed) I first had 3 sticks so i got another 8GB stick to fill all 4 banks for total of 32 GB
- Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i (Bought this PS to replace the Kentek PS)
- N780 TF 3GD5/OC (GeForce GTX 780 GAMING) (traded Geforce GTX 780 card for the MSI version of the GTX 780 card)
OK... I got the new Corsair 860w power supply installed and i installed the new MSI GTX 780 video card with the specs above everything installed fine no problems and my son was playing the Bio Shock Infinite game on Steam and about 1 hour into the game he got a blue screen of death, says something like "to prevent damage windows is now resetting" and it turns off so fast can't read the rest of the message.
I'm going to here in a little bit and update all device drivers with MSI Live update utility and also update the motherboard BIOS again to v10.11.
I'm really confused here, I'm also going to take out some memory and try to run it with sticks only in slot 2 & 4 to see if it runs more stable like that, also should i update the video card to the latest driver, i know the latest is not always the greatest driver.
I want to think you guys again for your help & time with this issue. I really dont know what else to do here, everything is new in this PC.
Thanks

MOVED: Z77A-GD65 issues with Geforce GTX 780 Video Card

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=177652.0

UPDATE
Well i wanted to post an update on my new build issue.
Here are my specs:
I bought a MSI Z77A-GD65 motherboard with BIOS v10.8
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8 (i had a issue with the newest BIOS flash v10.11 it wouldn't detect the harddrive, could figure that one out so i went back to v10.8)
- Balistix Sport 8GB sticks (Total of 32 GB memory installed) I first had 3 sticks so i got another 8GB stick to fill all 4 banks for total of 32 GB
- Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i (Bought this PS to replace the Kentek PS)
- N780 TF 3GD5/OC (GeForce GTX 780 GAMING) (traded Geforce GTX 780 card for the MSI version of the GTX 780 card)
OK... I got the new Corsair 860w power supply installed and i installed the new MSI GTX 780 video card with the specs above everything installed fine no problems and my son was playing the Bio Shock Infinite game on Steam and about 1 hour into the game he got a blue screen of death, says something like "to prevent damage windows is now resetting" and it turns off so fast can't read the rest of the message.
I'm going to here in a little bit and update all device drivers with MSI Live update utility and also update the motherboard BIOS again to v10.11.
I'm really confused here, I'm also going to take out some memory and try to run it with sticks only in slot 2 & 4 to see if it runs more stable like that, also should i update the video card to the latest driver, i know the latest is not always the greatest driver.
I want to think you guys again for your help & time with this issue. I really dont know what else to do here, everything is new in this PC.
Thanks

Login issues with zen 11.2.4MU1 and laptops

Hello,
We have been having issues all school year with laptops and logging in. They will get the log in screen to log in to the realm, or they will get the windows log in screen (like they did not have the dlu policy). I have every one up to 11.2.4.MU1 and am still having issues. When I go to the message log in the zenworks control panel for the device, I get the following errors:
"Could not download content for bundle, Windows Group Policy, because the ZENworks Server is not accessible."
I only get this on the laptops, so this has to be something with the way this is working with our wireless. There is no rhyme or reason that I can see as to when this happens. The only things I can tell you is:
1. This happens only on the laptops connecting with wifi
2. Usually happens when the laptop is first booted up.
3. The laptops are assigned a dlu user policy. This policy creates a user (GSStudent). This user is volatile and is cached for 1 day. This users is also a local machine administrator.
4. We have a separate nss volume that the content repo directory sits on ( I am not sure if this is causing the issues or not, I read somewhere there were problems with this).
5. Logging in as a local user and running zac cc temporarily fixes the issue.
I am at a loss here and am looking for some type of guidance that would point me to the solution. Any help would be appreciated!
Doug

Support,
OK, this is a sheer guess, but I wonder if
http://support.microsoft.com/kb/305293 might help
Shaun Pond
newly reminted as a Knowledge Partner

Wireless Router issues with MacBook Pro and Windows XP laptops

hello,
I have a d-link wireless router and I have a MacBook Pro and a Windows XP laptops. My issue is that I have to keep rebooting either the router or the modem (which I both replaced) and it still does not work right. Now can mac and windows work simultaneously through a wireless router (d-link) with no issues?

My problem is that every time I log off either computer, and when I start it back up up again I have to reconfigure all over again for both laptops to get connected to the internet. I called the d-link people and they pretty much said if i still had problem to go their web sites and download their firmware (which I have that version) so I am running out of options because I just can't turn either of them on with out reconfiguring it. Now I am using WPA on them. Could that be the issue? But right now I do not know. This is my first mac and I am getting a little irritated by this. Overall I like the mac except for this little issue. Does that help?

Open Gl Issue with Nvidia GTX 460 & Photoshop cs5

open gl has become disabled and preferences window doesn't show the detected video. card cache level is set to 4. help>system info still shows the card and drivers but I can't use any of the open gl features. I have already downloaded installed the latest drivers so Im not so sure that that would be the problem.
I know my graphics card supports it because I was using the rotate tool on this same document yesterday. How ever when i started it up today It no longer worked. I haven't installed anything since I used the rotate tool last (except for the latest drivers for my nvideo geforce gtx 460 gfx card, how ever this was an attempt to fix the problem)
I tried running the 64 bit verision of Ps but the results were the same.
My system is running
windows 7 64 bit
Intel core 2 duo 3.0 Ghz (dual core processor)
8 GB ddr2 ram
Nvidia GeForce GTX 460
(with 2 identical moniters connected via dvi)
Adobe Creative Suite CS5 Design Premium
Wacom Bamboo pen and touch w/ matching drivers
Belkin N52TE gaming pad with photoshop short cuts mapped to it.
Im not sure what else I can list that might be related
I made no system changes since the last time i ran photoshop.
I unplugged the wacom tablet for 5 minutes last night in order to install the drivers on another computer and when it was done i moved it back (Im fairly sure this couldn't have caused it but better to give all the info i guess...)
I would greatly apreciate any help you might be able to offer.

some one i know suggested that I try an older driver in case it was a bug with the latest one. I did so and once again It worked untill i closed photoshop. I closed and reopened the program to test it and sure enough when i reopened it all open gl functionality was gone once again. I don't believe nvidia drivers are the problem because i have tried 3 different version with the same results. each one works untill i close photoshop and the second time i open photoshop it quits working.
do any of you at adobe have any idea what might be causing this?

Printer issue with 10.6 and Dell All in One 968W

The Dell All in One 968W is basically a Lexmark 9500 series with a Dell badge. Dell do not support OSX but Lexmark have previously supplied a driver that works and allows me to print on the Dell printer.
However with 10.6 OSX will no longer support the Dell printer. I have tried using the supplied Lexamrk 9500 series dirvers with no luck, and I have tried going to back to the older Lexamrk dirver. The error message suggests that I need to get an updated driver from Lexmark. Lexamark do no yet provide this.
Has anyone found a solution to this problem?

Hi
Have you find any solution????
Lexmark has a lastest driver the 9500SeriesWebInstaller1.0.1.dmg released the 09/15/09 but it doesn't detects the printer
if we delete the default snow leopard driver for lexmark and install this new????

HP P1006 laserjet not working with a windows 7 Dell e5510 laptop

Hello
Any help is appreciated. When I plug into the usb I get an error message so therefore I can not continue with the installation of the drivers. aaaaaaahhhhhhhhhhhhhhhhhhh!!! This is frustrating.
thanks for any advice and suggestions

Hi Donaldparis,
After researching from the HP website, I realize that they do not release the HP LaserJet 3050 All-in-One Printer driver for Windows 7. It means that you will install the Windows 7 built-in basic driver and use the basic features. For more information about how to install the basic driver, you may refer to the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3463669&prodTypeId=18972&objectID=c01856597#category4
Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If it does not work, you may also try to install the printer driver for Windows Vista under compatibility mode.
Install driver under compatibility mode & Administrator level
==================================
1.Right click on the exe file for driver and click Properties.
2.Click on the Compatibility tab.
3.Select “Run this program in compatibility mode for.”
4.Choose Windows Vista (Service Pack 2) from the drop down list.
5.Select “Run this program as an administrator” option under the Privilege Level topic.
6.Click Apply, click OK.
7. Please double click on the exe file again.
Good luck!
Arthur Li - MSFT

Re: MSI Z97 U3 Plus PCI express 3.0 issues with evga gtx 770

if you disable gen3 in bios setup, does the it works fine when its installed in the pci-e 3.0 port?

It says V10.3, 3/28/2013. I'll have to flash and get back to you afterwards. System ran about 2 hours at idle, I looked at it, rebooted it to get into BIOS, rebooted again to get the revision confirmed on POST, and then I shut it down. After the fan...

Joint Stereo Balance Issues with Headphones iPod iPad iTunes 10.5.0.142

This is a cross posting.
I'm running iTunes 10.5.0.142 on windows vista SP2. I have an old nano (2nd gen) and an iPad (1st gen).
Most of the files in my library are MP3 encoded using iTunes with default joint-stereo settings.
All of my library seems to want play through the Left stereo channel whenever I have headphones plugged in, either on my laptop, on my ipad, or ipod. Same thing. Doesn't matter what set of headphones (and YES I have switched the phones in my ears, so I'm not going deaf). I've cleaned my ear buds.
I've reencoded some of the files to AAC on iTunes Plus - the result is the same. The thing is that all of the settings indicate stereo in some form. NONE are mono. I can hear the track really really faintly on the right channel, but it's constantly as if I'm going deaf in one ear, and I'm not.
The REALLY strange things are this - when played out of my laptop speakers, there are no issues with balance. Neither are there issues when I play through Airplay to an Airport Express set up.
I've gone through my files, and it doesn't matter which ones. This problem occured before, but I think it cleared up quickly with an iTunes update at somepoint.
IT is RIDICULOUS. I do not have this issue with any other audio on my laptop, and it only started when I updated to 10.5.0.142. I haven't actually changed anything in the library other than that.
Please let me know if something is going on or what I'm missing here.

I noticed this problem first on my Windows 7x64 i3 laptop... I'd rather it not happen. Knowing how helpful Apple has been in the past at actually solving Windows problems. You might consider uninstalling and just syncing to iCloud unless you have a lot of music. As for me, I'm uninstalling it again on my laptop.

TS3212 I am having an issue with i-tunes - I have uninstalled it and then reinstalled it on my computer. It will not open up. What do I do now?

My itunes would not open up for me. I uninstalled it and then reinstalled it and it still will not open up for me. What can I try next?
Kelly

Possibly I have the same situation. I have uninstalled and reinstalled 3 times. I have posted a question and no one at Apple has responded to me yet. Diagnostics say my laptop cannot reach the Apple site. I have a desktop that accesses just fine via the same network. Clearly it appears to me a permissions issue with the new software that my laptop does not auto adjust to or for. I am running XP Pro on both machines and have no problem accessing the internet, as you can see.

Video Driver Issue with a T61p

Hi,
We have an issue with the ATI driver, crashes the laptop, and only resolution is to repair Vista with a Vista DVD.
T61p is hooked up to an advanced dock, and using the dual display (mirrored).
Would like to know which driver works best with Vista and an advanced dock.
Andre

Hello again pinktoe.
If using selective startup allowed the drivers to work properly then there has to be something in that list causing you problems. You need to determine what exactly is causing the issue. I suggest trying the following.
Press the Windows+X keyboard combination.
Select "Run."
Type "msconfig" and press Enter.
Start by using selective startup to boot without services or startup items. However, only select one.
Save the changes and reboot the notebook.
If the problem persists go back to msconfig and re-enable the disabled item. Disable the other item, save your changes, and reboot again to verify that the issue does indeed disappear through this option.
If the issue disappears when disabling the services you'll want to try the following.
Select the Services tab.
Check the "hide all Microsoft services" box in the bottom left.
Disable all services.
Re-enable the first 5-10 services, save the changes, and reboot the computer.
If the problem returns then you know it is one of these services and you can continues disabling the enabled services until you find the culprit.
Repeat as needed until the culprit is discovered.
Post the result.
If the issue disappears when disabling the startup items you'll need to repeat the same process.
Once you determine which item(s) are causing the issue make sure to post the result.
Have a good day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Issue with a GTX 750m / Dell xps laptop

Similar Messages

Maybe you are looking for