Issue with Agents for S1IS6

Hello.
I'am actually working on S1IS 6.
I installed 2 agents : IIS 5 and Sun One Web Server 6 on Win2000.
Each time I try to authenticate a user I got this error message :
2003-01-07 12:03:05.375 Error 1540:00C1F6E0 PolicyEngine: am_policy_evaluate: InternalException in Service::construct_auth_svc with error message:Application authentication failed during service creation. and code:20
I don't know what to do to fix the problem.
Walid.

the share secret should be the amldapuser account password not the amadmin password. Try updating the password in the agent config file.
Steve

Similar Messages

  • Issue with authorizations for BPS

    Hi Experts,
    There was an issue with authorizations for BPS. We have a large number of agents that need to enter plan data via a layout. In order to control the necessary authorizations, we would like to filter via something similar to a user exit using a function module in order to avoid having to define authorization objects for each of the agents who have access to the systems. Right now, we are not sure if there is user exit concept available as it is for BW variables. Any body experienced similar issue may share their experience.
    Regards,
    Ankit

    Hi,
    In BPS, you can use user specific variables or you can set up a Variable of type exit. You can also have a variable of type authorization which uses the security / authorization of the BW system.
    Hope it helps...
    Cheers,
    Tanish

  • Seeing issues with agents being able to go ready/not ready.

    I am seeing issues with agents able to go ready/not ready. I have attached logs for this. I would appreciate help

    -We are seeing issues with agents trying to log in and getting timeout errors, taking 3-5 times to actually login/JTAPI errors. Supervisor application is having the same issues. We have full IP Visibility from all subnets. The CUCM/CCX servers were put in last August, and we had zero issue up until the past few weeks. Ive validated the agent settings, JTAPI users etc and Ive rebooted the UCCX server as well

  • Issues with nested for loops - saving images from a camera

    Hi all,
    I've written a vi. to capture a specific number of images ('Image No') and save these images, outputted to a folder of my choice.  Each image is identified sequentially.  However, I wish to do a number of iterations ('Run') of this capture sequence, such that the filename of each image would be 'Filename (Run)_(Image No).png', e.g. run 5, image 10 would be 'Filename 5_10.png'.  I have tried a nested for loop for this but I receive an error 'Asynchronous I/O operation in progress' (I've attached a printscreen).
    Can anyone assist me in solving this problem? I preiously posted this in machine Vision but got no response (http://forums.ni.com/t5/Machine-Vision/Capturing-image-sequences-issues-with-nested-for-loops/m-p/19...).  Please find attached my vi.
    Kindest regards and thanks,
    Miika
    Solved!
    Go to Solution.
    Attachments:
    Labview problem.jpg ‏3841 KB
    Image sequence save to file.vi ‏48 KB

    Miika,
    the problem is not the filenam, but the name of the folder (AHHHHH!). You try to create the same folder in the outer for loop over and over again.... (it is the error message above the '======', not below )
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Photoshop batch production - issues with 'save for web'

    Hi,
    I'm having an issue with 'save for web' on a batch. I've just spent the last 2 hours searching the web and this forum and although the issue gets touched upon, the threads either suddenly head off in another direction, end, or i just struggle to make sense of the answers given.
    I have 350 images that i want to resize to thumbnails and then save for web. 2 hours ago this seemed like a 5 minute job.
    I creat an action called 'batch_thumbnail' and press 'Record'.
    I then select 'File' > 'Open' and select an image to open using the dialog box.
    I then select 'Image' > 'Image Size' and resize the image to the thumbnail size (200 x 125) and press 'OK'.
    I then select 'File' > 'Save for Web and Devices', set my optimisation settings and press 'save'.
    Using the dialog box that pops up, i navigate to a pre-created directory called 'thumbs' and press 'save'.
    I then select 'File' > 'Close' and on the dialog box that pops up i select 'Don't Save'.
    I then stop the action from recording.
    So far so good.
    I then select 'File' > 'Automate' > 'Batch...' and the dialog box appears.
    I select my action in the 'Action' drop down menu.
    In 'Source' i set the drop down menu to 'Folder', select 'Choose' and select the target directory with my 350 images in.
    In 'Destination' i set the drop down menu to 'Folder', select 'Choose' and select the target directory (thumbs), where i wish to save the thumbs.
    In 'File Naming' i leave the first box as 'document name', set the second to '_thumb' and have the third as 'extension'.
    I then click 'OK'.
    And this is where the problem begins. Everything works fine till it trys to save the second image. I can see what's happening, as the directory path and image name that are used whilst setting up the SFW part of the action, are getting hardcoded into the action. So every resulting image is being saved as the same file, instead of being overriden by the settings in 'File Naming'.
    I've tried selecting 'Override action 'Save' command', but it doesn't make any difference. Is it actually possible to batch produce files using 'Save for Web and Devices'?
    Cheers,
    James

    I have written a couple of Save For Web batch processors, they may be of use to you?
    They can both resize and run an action if required.
    CS2-CS3 http://www.ps-scripts.com/bb/viewtopic.php?t=2374
    CS4 http://www.ps-scripts.com/bb/viewtopic.php?t=2276 (This handles metadata)

  • Issues with Agents being logged out.

    All the agents on aperticular PIM were logged out and could logback in after approx 7 minutes.Wheni check teh CTIOS logs now its full of the below error message
    12.333  ClientMgr[1]::DistributeEvent(eOnNewSkillGroupStatisticsEvent), FAILED to find
       Client[0006].
    Can you please let me know if this is service affecting or its something critical ?

    -We are seeing issues with agents trying to log in and getting timeout errors, taking 3-5 times to actually login/JTAPI errors. Supervisor application is having the same issues. We have full IP Visibility from all subnets. The CUCM/CCX servers were put in last August, and we had zero issue up until the past few weeks. Ive validated the agent settings, JTAPI users etc and Ive rebooted the UCCX server as well

  • Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

    Hi all,
    we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
    Exchange Server. 
    We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
    What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
    Timestamp Sender Recipients MessageSubject
    25.02.2015 16:48:52 [email protected].. {}
    25.02.2015 17:04:43 [email protected].. {}
    25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
    25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
    25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
    25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
    25.02.2015 17:13:45 [email protected].. {}
    25.02.2015 17:13:55 [email protected].. {}
    We can still reproduce the issue on different Mac computers.
    Thanks for any help in advance!
    Thanks and best regards
    Reto

    Here is the mailheader form the successfully sent email:
    Date: Wed, 25 Feb 2015 17:08:25 +0100
    Subject: test 3
    From: sender <[email protected]>
    To: "'[email protected]'" <[email protected]>
    This mailheader is from an email which was not sent out:
    User-Agent: Microsoft-MacOutlook/15.6.0.150113
    Date: Wed, 25 Feb 2015 16:48:52 +0100
    Subject: test 1
    From: sender <[email protected]>
    To: [email protected] <[email protected]>
    Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

  • Issue with Agent Profile from AM 70 OpenSSO interesting issue

    Hi All,
    I have a specific scenario and if it is not possible then ugrade from AM 7.0 to OpenSSO cant be true.
    I have issue with the agent profiles (BTW I am not doing upgrade from AM 7.0 to OpenSSO but its a fresh OpenSSO install)
    In AM 7.0 Agent profile is like this (below is the exact export from the AM 7.0)
    dn: uid=Test-Agent,ou=agents,o=am
    sunIdentityServerDeviceStatus: Active
    uid: Test-Agent
    objectClass: sunIdentityServerDevice
    objectClass: iplanet-am-user-service
    objectClass: top
    objectClass: iPlanetPreferences
    sunIdentityServerDeviceType: Agent
    cn: default
    sunIdentityServerDeviceVersion: 2.2
    userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
    Below is exact import into the OpenSSO (I created this LDIF using my script)
    dn: ou=Test-Agent,ou=default,ou=OrganizationConfig,ou=1.0,ou=AgentService,ou=services,o=am
    ou: Test-Agent
    sunsmspriority: 0
    sunserviceID: 2.2_Agent
    sunKeyValue: sunIdentityServerDeviceStatus=Active
    sunKeyValue: sunIdentityServerDeviceKeyValue=
    sunKeyValue: description=
    objectClass: sunServiceComponent
    objectClass: top
    sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
    Now you can see the issue in AM 7.0 the password is stored as "userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" where by directory server userpassword is SSHA encrypted VS in opensso it is "sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" which OpenSSO doesnt like .. :)
    If i create a Agent from the opensso Console then Agent create a password using AES encryption and and that works fine even when I import my above LDIF and update the password using the OpenSSO console it also works. The issues I have this I dont know all of the Agent clear text password and I only have the LDIF to work with. Any thought !! Please let me know I am stating to believe that the upgrade from AM 7.0 to OepnSSO will have the same issue which i have not tried yet.
    Anythoughts or ideas are very welcome !
    -Haris

    Configuring the agent like this, ie importing a ldif file is not supported and can lead to unexpected results as you have observed. Just do it in a supported way and change the password for the agent if you don't know it. As the administrator you are supposed to know the password or have the power to reset it.

  • OBIEE 11G: Issue with Agent

    Hello All,
    I am trying to make agent work in OBIEE 11G together with Active Directory settings but the agent are failling for some users. Some users are not able to send the ibots:
    We get the following message with Agent Failed:
    Agent ID: XXXXXXX
    No devices for user: XXXX
    Agent ID: XXXXXXXX
    No Content for user: XXXX
    Kindly note that I have already checked the My Account of these users and the email address is well present there.
    Can anyone help us investigate on this issue.
    Thanks and Regards

    Where do you have your LDAP configured
    Is it in RPD or in Weblogic?

  • Issues with agent.

    Here is the script:
    import os
    retVal = os.system(r'sqlldr odi_stage/test1234@devodi control=E:\Hyperion\DRM\ODI\Scripts/DRM_ESSBASE_PLANNING.ctl log=E:\Hyperion\DRM\ODI\Logs/DRM_ESSBASE_PLANNING2.log')
    when i excecute this script from studio with agent=local(noagent) it runs fine and when i run same script with an agent=d1odiagent_dev it fails with error Traceback (innermost last). it seems like its not able to recognise local drives. anyone came across this issue?
    Thanks.
    Sri.

    Phil..
    Here is the script I have added to capture the message:
    if retVal == 1 or retVal > 2:
    str1 = 'SQLLDR FAILED. Please check logs for details '
    raise str1
    else:
    str1 = 'SQLLDR SUCCESSFULL'
    and please find the error message below.
    Thanks.
    ODI-1217: Session PROC_LD_ESSBASE_PLANNING_SQLLDR_T (841001) fails with return code 7000.
    ODI-1226: Step PROC_LD_ESSBASE_PLANNING_SQLLDR_T fails after 1 attempt(s).
    ODI-1232: Procedure PROC_LD_ESSBASE_PLANNING_SQLLDR_T execution fails.
    Caused By: org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 7, in ?
    SQLLDR FAILED. Please check logs for details
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:619)

  • Peformance issue with iSetup for loading fnd_flex_value_norm_hierarchy recs

    Hi
    The customer site where I am working in currently has implemented isetup to load data from Hyperion DRM to Oracle GL. They are currently on 11i.AZ.F patch level.
    The customer has constantly had problems in two areas with iSetup -
    1. iSetup has a limitation that all existing children records plus new ones being added have to sent in the XML file provided as input to iSetup. For eg. one parent ENTXXX might have 15000 children records i.e records in FND_FLEX_VALUE_NORM_HIERARCHY. Now when 2 children are removed from this parent in Hyperion DRM and these two records sent to Oracle iSetup for getting deleted from the parent, the current implementation stipulates that iSetup requires in the XML input file the remaining 14998 records. Thats how it knows to remove the two nodes. This is a huge performance issue.
    They are looking at loading into iSetup only the two deleted nodes with an action code of DELETE and let iSetup handle this rather than having to provide the entire list of children less the removed nodes for iSetup.
    2. Can we load using the final xml file directly by calling any Java class/process directly rather than going through iSetup Loader Concurrent Request?
    3. Is there any documentation on how to use the isetup Java classes?
    Will upgrading to 11i.AZ.H patch level solve any of the above concerns/issues?
    Regards,
    Richard

    #1. I guess, you are referring to the problems that you are encountering while loading GL COA. You may log SR against GL to know more details on how API loads data to instance. DELETE is a specific requirement in your case and I would suggest you to work with GL team and they may provide some solution or workaround to overcome this performance issue.
    #2. No, concurrent program does good amount of pre-processing that you would not get if you directly call the java classes.
    #3. Not sure, what you are exactly looking at. Are you looking for user guide to write your own iSetup API classes?
    11i.AZ.H has got good amount of performances fixes overall and it is recommended release on top of 11.5.10.2CU. I would suggest you to upgrade to 11i.AZ.H.
    Specific to GL COA issue, I don't think 11i.AZ.H would really help you much. It is very much functional issue with respect to API and you have to work with GL team to get workaround/solution. This may involve customizing the API according to your requirement.
    Thanks
    Mugunthan.

  • BB BOLD 9700 sync issues with Outlook for MAC

    Hi Support, 
    I hope that you can help me?  I have been having issues with my BB calendar not being able to sync with my Outlook for MAC calendar.  I am using BB OS 6.0, Blackberry Desktop software 2.2.0 and Mac OS X version 10.7.2.
    I have been able toget around the calendars not syncing but this morning I added iCal to iCloud, stupid move as it erased my entire calendar.
    i was wondering if someone could help me restore my Outlook calendar and have my BB and calendar sync properly.
    Please Help!!!

    Hello and welcome to the BlackBerry Support Community Forums.
    The BlackBerry Desktop Software needs a local calendar for sync. It does not support the iCloud.
    You will need to create a new local calendar in your iCal to continue synchronizing with the Desktop Software.
    As for restoring your Outlook calendar, you will need to talk to Apple for assistance.
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Link Safety measure with agent for a Work Area

    Hi,
    Is there any way to match a specific safet measure to a specific Agent for a given Work Area?
    For example, for a Work Area, I may have "dust" as an agent and i may need to link it with a specific safety measure oriented to people called "EPI Employee's training".
    Thanks in advance,
    Daniel Siñani

    Hi Daniel,
    For you to be able to define safety measure for any hazard inducing agent, logically you must have done the study of the risks posed by that agent. This study is called as risk assessment in SAP EH&S. So, you will have to create risk assessment for "dust". Here you may assign safety measure "EPI Employee's training" under category "Organizational" and type "Education and training". Moreover, you can define many more fields for tracking of the safety measure to its successful completion.
    Also, you can create SAP standard reports for Agents vs. Safety measures from following path:
    IHS>Reporting>Risk Assessment-->List Agents & Safety measures for a work area, and List Agents & Safety measures for a person.
    Regards,
    Pavan

  • Issues With Save For Web CS6

    I'm having some issues with my file when trying to Save For Web. A band of transparency appears above my image even though I have everything cropped to the artboard, and the artboard is exactly the size I want the final image to be. If I uncheck "Clip to Artboard" the band of transparency disappears from the top, but reappears on the right side. It seems as if the artboard area is calculated differently in the Save For Web screen; its slightly off. I've included some images so you can see the issue.
    Trying to save for web as a .png with "Clip To Artboard" selected; a tiny (one pixel tall?) band of transparency on the top of the image.
    Trying to save for web as a .png without "Clip To Artboard" selected; the image seems to shift and the band of transparency appears on the right size. Also some of the pieces of the image appear on the bottom outside of the artboard.
    I made sure to crop each element of my image to fit exactly on the artboard. Previously, I had made sure to use a clipping mask exactly the size of the artboard and still had these issues. I would like my .png to not have a band of transparency. It has the same issue when I change it to .jpg, but instead has a white matte band. What am I doing wrong, or is this just an issue with Illustrator? Thanks in advance!

    Depending on your use of the image in context, won't the transparent strip "disappear?"
    The only solution I know is to open it in Photoshop and manually crop out the transparent strip. AI or Save for Web also seems to antialias the edge of free-standing art over a transparent background. I just make the artwork slightly larger than the final cropped size, save for web, then crop in Photoshop.

  • Any compatibility issues with IE8 for STVN 2.1 Orgchart?

    Hi Experts,
    Just curious if there are any issues with running IE8 compatibility mode for Nakisa STVN 2.1 Orgchart?
    Thanks,
    Michael Dinh

    Hi Michael,
    IE8 Compatibility Mode is fine for use with STVN2.1 applications. As Stephen said, IE7 and IE8 are certified for SVSN3.0 but IE6 support has been discontinued.
    Best regards,
    Luke

Maybe you are looking for