Issue with ALV sceen called using BDC in new task and in background mode

Hi Gurus,
Need your expert advice. I am trying to call one transaction (IS AUTO - VELO) which has ALVs on screen. VELO is being called through BDC in NEW TASK in background. So, the new session is a Dialog session and SY-BATCH is initial here.
In two different scenarios, I am getting error at two different places:
a) As I can't call ALV directly, I am using docking container. This is giving issue during 'CREATE OBJECT' -> CONSTRUCTOR for cl_gui_alv_grid -> if offline( ) is initial. (AS SY-BATCH is initial) -> call method me->set_registered_events_internal exporting events = lt_events. -> call method get_registered_events importing events = lt_events. -> IF H_CONTROL IS INITIAL. RAISE CNTL_ERROR. ENDIF.
b) Call to OLE_FLUSH_CALL is happening, which is resulting into dump.
I tried to search SDN and google, but couldn't find the solution. Thanks for your help :).
Regards,
Alok

I'm not sure what is eating up your system resources, but .wmv files
are considered to be a delivery format, and are not ideal for editing.
I have never tried to edit screen capture video from any source, but you might consider
upgrading to Expression Encoder 4 Pro (with codecs)... at least it includes H.264.
Expression Encoder 4 Pro

Similar Messages

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Issue with ALV grid print preview/spool

Hello everyone,
I am working on a report and I am having some issues with ALV grid. Currently in our DEV and QA environments the user can run the report, view the ALV grid, and print the grid without any issues.
However this isn't the case in the Prod environment. The user is able to run the report and view the grid without any issues. But when they click print preview or click print, the spool is incorrect. It shows the proper values from the grid, but the first field is reduced in length. Rather than showing a numeric field of length 10 it shows 99999999# or 99999999...
The programs are identical through every environment, including user parameters, formats, and spool settings. I have been told printing grids may have some issues, does anyone have any advice or dealt with this issue before?
I appreciate the help.
Thanks,
C

I was waiting to hear from the functional team on the matter and no one has mentioned any more issues. I am assuming the problem is solved. I just noticed the thread was still un-answered and wanted to give an update.
Thank you for you help Vijay.
Regards
C

I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

Hi miffyzoo,
If you are having bluetooth pairing issues with your iPhone and your Mac, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden

We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform "niScope_CalSelfCalibrate(handle, "", 0);" function.

We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform “niScope_CalSelfCalibrate(handle, "", 0);” function.
But it made it worse. I tried using option 2 to restore but it did not work.
Could you pls advice me to resolve this issue.

Hi Ana10,
Are you using this digitizer with NI VideoMaster? if not you should probably post this in the Digitizer forums. That said I would suggest using the self calibrate function in MAX for this device rather than the LabVIEW API method just so that you can rule out any errors in correctly configuring the digitizer for self cal in LabVIEW. Also you should ensure that all inputs are disconnected before performing a self cal. If this still results in an error in calibration you could refer to the following document or arrange to return the digitizer to NI for external calibration.
http://www.ni.com/pdf/manuals/370328e.pdf
Hope this helps,
Nick

I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

I had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged....

I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?

Settings > General > Reset > Reset network settings

Photoshop cs6 with OS X Yosemite, I open a new layer and i paint on it but if I use cmd Z it does not undo fluently the most of the time.

Photoshop cs6 with OS X Yosemite, I open a new layer and i paint on it but if I use cmd Z it does not undo fluently the most of the time.

Grab the plug-in posted here: http://helpx.adobe.com/photoshop/kb/photoshop-menus-turn-white-mac.html
That should get everything working as expected on Yosemite.

I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

Did you fix the problem? I have the same problem and it has been pain in the neck.

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

Are there any issues with itunes where as certain windows looks like a PC in safe mode?

are there any issues with itunes where as certain windows looks like a PC in safe mode?

Check your trash. I had some old uninstalled files in there. Deleted and restated itunes. seems to work.

Call Function'BAPI_USER_CHANGE' starting new task 'TEST'

Hi All,
I have problem with starting new task statement, I am using one FM after that am using starting new task 'TEST'
statement but its not working in one system its working fine in other systems, Please help me who this works.
Thanks in Advance.
Eg: Call Function'BAPI_USER_CHANGE' starting new task 'TEST'
Regar

Thanks Lqueiroz ,
Now again i am getting a DUMP by saying ,
"An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "At least one entry could not be "
on the called page."
so what can be the reason for this
call function 'ZRFC_PER_DIEM' starting new task lc_taskid performing subr on end of task
        exporting
          h_guid      = it_header_guid_n
          request_obj = lt_requested_objects_n.
      wait up to '1' seconds.
      read table gt_scl into ls_scl index 1.
      p_transaction_per_diem = ls_scl-value.
      read table gt_scl into ls_scl index 2.
      transaction_currency_code = ls_scl-value.
form subr   using task_id type clike.
data: p_transaction_per_diem type char13,
        transaction_currency_code type char3.
receive results from function 'ZRFC_PER_DIEM'
                           tables
                            value = gt_scl.
So basically i am getting dumo when receive statenment is running , by giving above dump.
Regards
PG

CALL FUNCTION func STARTING NEW TASK task

hi,
i developed rfc to extract data and send to xi
as my interface is Async
as per soem documents it was mentioned the syntax
CALL FUNCTION func STARTING NEW TASK task
wat is the task ? in the syntax
and how do i use it
jeff

Hi suresh,
this is the code of RFC. if i execute without RFCDESTINATION it executes successfully. when i use RFC DESTINATION it shows error
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
i created RFC destination using TCP/IP and registered program. same parameters i am mentioning in XI.
FUNCTION z_bank_reconciliation.
""Local interface:
*" IMPORTING
*"     VALUE(COMP_CODE) TYPE BUKRS
*"     VALUE(HOUSE_BANK) TYPE HBKID
*"     VALUE(ACCOUNT_ID) TYPE HKTID
*" TABLES
*"      CHQDETAILS STRUCTURE ZPAYR
DATA: itab LIKE payr OCCURS 0 WITH HEADER LINE.
DATA: jtab LIKE payr OCCURS 0 WITH HEADER LINE.
DATA: it_bank LIKE zbankrecon OCCURS 0 WITH HEADER LINE.
DATA: it_bank1 LIKE zpayr OCCURS 0 WITH HEADER LINE.
TYPES : BEGIN OF ty_bseg ,
             bukrs LIKE bseg-bukrs,
             hbkid LIKE bseg-hbkid,
             belnr LIKE bseg-belnr,
             zlsch LIKE bseg-zlsch,
             kostl LIKE bseg-kostl,
             hkont LIKE bseg-hkont,
             bzdat LIKE bseg-bzdat,
         END OF ty_bseg.
TYPES : BEGIN OF ty_t012 ,
              bukrs LIKE t012-bukrs,
              bankl LIKE t012-bankl,
              bankn LIKE t012k-bankn,
         END OF ty_t012.
TABLES : payr, t012, t012k, bseg.
DATA : itpayr LIKE zpayr OCCURS 0 WITH HEADER LINE,
         itt012 TYPE STANDARD TABLE OF ty_t012,
         itbseg TYPE STANDARD TABLE OF ty_bseg,
         wa_itt012 TYPE ty_t012,
         wa_itbseg TYPE ty_bseg,
         total TYPE n.
SELECT * FROM zbankrecon INTO TABLE it_bank
                   FOR ALL ENTRIES IN itab
                   WHERE chequeno EQ itab-chect.
SELECT abukrs abankl b~bankn
              INTO CORRESPONDING FIELDS OF TABLE
              itt012 FROM t012 AS a
      INNER JOIN t012k AS b ON bbukrs = abukrs AND b~hbkid =
house_bank AND b~hktid = account_id
            WHERE abukrs = comp_code AND ahbkid = house_bank.
DELETE ADJACENT DUPLICATES FROM itt012.
SELECT zbukr hbkid hktid vblnr gjahr zaldt checf chect znme1 rwbtr
waers zaldt zbnkl FROM payr INTO CORRESPONDING FIELDS OF TABLE itpayr
    WHERE ( zbukr = comp_code AND hbkid = house_bank ) AND hktid =
    account_id.
SELECT bukrs hbkid belnr zlsch kostl hkont bzdat FROM bseg INTO TABLE
itbseg
WHERE bukrs = comp_code AND hbkid = house_bank.
SORT itt012 BY bankl.
SORT itbseg BY belnr.
READ TABLE itt012 INTO wa_itt012 INDEX 1.
LOOP AT itpayr.
    read table itbseg into wa_itbseg with key bukrs = itpayr-zbukr
hbkid = itpayr-hbkid.
    if sy-subrc = 0.
      itpayr-kostl = wa_itbseg-kostl.
      itpayr-hkont = wa_itbseg-hkont.
     itpayr-bldat = wa_itbseg-bzdat.
      itpayr-zlsch = wa_itbseg-zlsch.
    endif.
    itpayr-zbnkl = wa_itt012-bankl.
    itpayr-zbnkn = wa_itt012-bankn.
    MODIFY itpayr.
    APPEND itpayr TO chqdetails.
ENDLOOP.
LOOP AT chqdetails.
    READ TABLE it_bank WITH KEY chequeno = chqdetails-chect.
    IF sy-subrc NE 0.
      MOVE chqdetails TO it_bank1.
      APPEND it_bank1.
      CLEAR it_bank1.
    ENDIF.
ENDLOOP.
REFRESH chqdetails.
chqdetails[] = it_bank1[].
LOOP AT it_bank1.
    MOVE : it_bank1-chect TO zbankrecon-chequeno,
    sy-datum TO zbankrecon-check_date,
    sy-uzeit TO zbankrecon-check_time.
    INSERT zbankrecon.
    CLEAR zbankrecon.
ENDLOOP.
ENDFUNCTION.

Call function module in backgrouns task and in update task

Hi Gurus,Pls crear me on the " <b>Call function module in backgrouns task and in update task</b>".
how it works and waht is the link with LUW releated to these .
also heard that commit work statement aslo linked with this.
Pls clarfiy me with expalnation of code.

Hi sridhar,
the explanation already given is correct and good. Small add-on:
All functions called during one LUW with addition IN UPDATE TASK are stored together with their actual parameters in a temporary memory area. The moment a COMMIT WORK is issued, the functions are released to be executed by a so-called update task which is running in the background. This explains why functions called in update task never return anything, no SY-SUBRC and no export or table parameters If a function called in update task raises an exception or runs into an error the calling user will get an express message informing about this. Also, all database updates done by this update process are rolled back to keep consistency.
This proceeding helps to keep database tables consistent and allows the user to keep on doing his work before all database updates are complete. You may have seen messages like "material will be changed" after saving. If you open the same material immediately, you'll get a message "object locked by...<yourself>". This means the update task is still running.
Regards,
Clemens

Behaviour of CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE'

As per ABAP help documentation, the statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' should create a new main session in same user session.The behaviour is wrong as per documentation.
But current behaviour:
The statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' is creating a new user session.
Any reason?

Hi Prakash,
I'd agree with Suhas, that you're reading the documentation wrong. Here's your quote:
As per ABAP help documentation, the statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' should create a new main session in current user session.
If you look at the help, you can see that it says:
When the destination NONE is used, a new main session is opened for the current user session.
Do you see the difference? Also, note that in this context main session basically means that we're talking about a new external session:
Each task ID defines a separate RFC connection with its own context, meaning that, in the case of repeated function module calls of the same task ID, the global data of the relevant function group can be accessed, if the connection still exists.
In dialog processing, note that the maximum number of six main sessions cannot be exceeded, else an error message is displayed.
If you're still in doubt, check out the online ABAP documentation for [CALL FUNCTION - STARTING NEW TASK|http://help.sap.com/abapdocu_70/en/ABAPCALL_FUNCTION_STARTING.htm]. So I'd say the documentation is in line with the actual behavior.
Cheers, harald

Issue with ALV sceen called using BDC in new task and in background mode

Similar Messages

Maybe you are looking for