Issue with archiving in file sender channel

Hi Experts,
We have configured a file to ABAP proxy scenario in our production PI 7.0 system. the file sender communication channel is configured to perform " file content conversion" and archive the source file after it is processed successfully.
Recently , the sender channel stopped archiving the files. but it is processing them.
we need the source files to be archived. i do not see any related error in XI logs and default trace files . also it is not a problem with disk space on file system either.
can you please let me know how the issue can be resolved.
Thanks.
-Kaushik

Hi
Make sure that you have selected processing mode Archive
Try by Checking Add Time stamp check box.
Check the Archive File path in correct format
or put archive file in diffrent folder from which selecting file.

Similar Messages

Hi, Using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Any suggestions?

Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?

Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?

Issue with length of file paths - Windows & C++ plugin

Hello,
I've got an issue that just popped up on my OCR plugin I've been working on that I suspect is related to the length of the filepath.
I'm getting the following error that is being caught and logged when trying to open a file (filename changed for security purposes):
Error Opening File: D:\aVeryLongFilePath.pdf
Exception info: This file cannot be found.
The entire string, including the D:\ part, is 266 characters long. I cut down the length of part of the path one by one and it was able to open and OCR the document when the length was 259 characters.
I know there's a MAX_PATH variable in Windows and/or there's some kind of limitation for file length. Note that I can open the file in Acrobat using File->Open and run OCR on it individually using the built-in Recognize Text function, but if I try to Recognize Text for Multiple files and choose "Add Folders", the file in question doesn't show up in the list of files to be batch OCR'd (even though it is there). Interestingly, choosing "Add Files" from the Recognize Text->In Multiple Files does work. So Acrobat itself has at least some issues opening the file using some of it's features.
Here's how I'm opening the document:
     string pn;               // assume this is initialized, I'm just putting this here to demonstrate what type it is
     pathName = pn;
     ASAtom pathType = ASAtomFromString("Cstring");
     asPathName = ASFileSysCreatePathName(ASGetDefaultFileSys(), pathType, pn.c_str(), NULL);
     pdDoc = PDDocOpen(asPathName, ASGetDefaultFileSys(), NULL, true);
Is there a way around this problem?
Thanks.

Yes, you are hitting the MAX_PATH on certain versions of Windows.   The only workaround would be to see that the file is "a very long path" and then break up the pathname construction into multiple pieces (perhaps the containing directory and then the file itself). The other option is don't use Cstring to construct, use the Unicode variant.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 7 Nov 2011 15:43:33 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Issue with length of file paths - Windows & C++ plugin
Issue with length of file paths - Windows & C++ plugin
created by zephed56<http://forums.adobe.com/people/zephed56> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4012710#4012710

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

Issue with opening .PDF files after recalling from Symantec Enterprise Vault

Good Morning,
I am having issues with opening PDF files that have been recalled from Symantec Enterprise Vault and some of the files are anywhere from 3-4 years old. Some files open, while others return the error: Adobe Reader could not open filename.pdf because it is not a supported file type or might have been damaged. It is inconsistent as to which files it occurs with. I am not ready to believe that I have that many corrupt files out there. I am opening them on a Windows 7 Enterprise SP1 x64 desktop. Adobe 10.1.7. I have already configured the registry setting for bValidateBytesBeforeHeader that I found in another article to no avail.
The files are on a network share, but I also tried copying them to my local desktop and still received the error.
I have seen other posts regarding this error, but do not see a definitive solution and am hoping that in recent days someone has come up with a solution.
Thank You
Brian Dougherty

Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
Might have been damaged is pretty cut and dried in its meaning and interpretation.
There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

File sender channel - file name "null"

Hi all,
I am designing a scenario where I am reading 2 files from 2 different senders, and these 2 messages are fed to a multi mapping in BPM, which creates a single target message. I need to read the name of only one of the two source files and populate it in one field of the target message.
I have read some blogs and forum threads about how to access the file name from the sender file channel. It calls for turning on the adapter specifc parameters in the channel and writing the following UDF (taken from Michal's blog #2664) -
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
After doing all this, I am getting file name as "null". Can someone pls let me know the cause for this ? My concern is since I want to read only one file name, so I have updated only that specific file sender channel for adapter specific attributes.
Regards,
Shankar

Hi Raj,
I checked the ASMA for second channel also, but no luck
I can see both the files names in their respective messages in SXMB_MONI under node 'Dynamic Configuration'. But the two messages enter the multi-mapping within BPM (where I have put trace to print the file name as per above code), the value is shown as "null".
1) Is this file name access is possible only in simple scenarios ?
2) Also, is the file receiver mandatory ? I have email receiver in my scenario.
Any clues ?
Regards,
Shankar

File Sender channel polling successfully but not picking the files.

Hi All,
Can any one please provide any SAP Note Or any Alert mechanism for the File Sender channel in case where the XI channel in polling successfully at a particular folder from Source System but not picking the files. Thanks in Advance for the solution.

Hello,
If you want to know the reason for failure in picking up the file ,You can check the MessagingSystem monitoring for the reason behind failure.
http://host:httpport/MessagingSystem/monitor/monitor.jsp
For Alert may be you can follow prateek instructions.
HTH
Rajesh

File Sender Channel

Hi,
I have a job running which copies a file from remote server to my PI server. I have a file sender channel which picks up this file send it for further processing.
Is there a way to make sure that the file sender channel reads the file only after it has completely been copied from the remote server assuming that we dnt know what is the maximum time it could take to write the file.

Two options,
1. The script should write the file having set the indicator as read only. Only after it writes the file completely the read only option should be removed.
the option ● Process Read-Only Files (for transport protocol File System (NFS)) should be disabled
2. Use this option,
Advanced Mode
To specify additional parameters in the adapter configuration, set the Advanced Modeindicator.
● Msecs to Wait Before Modification Check
Enter the number of milliseconds that the adapter must wait before it checks whether the files have been changed.
This parameter is not available if you have selected File Content Conversion as the Message Protocoland then made an entry under Recordsets per Message that splits an input file into several messages.
Note
This parameter is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.
All above solutions will work only if its NFS and not FTP

Mass change in file sender channel.

Hi,
I want to do change in all my file sender channel and want to add following parameter.
Parameter Name : clusterSyncMode
Parameter Value : lock
I have approx 300 file sender channel.
So is ther anything by which I can perform mass change at the same time and can add parameter to it ?
Please suggest if anything like this.

You can change the parameter as a Service Property, applying to all communication channels at once. Please check the note below (for 7.1+, you must change it on NWA instead of VisualAdmin)
[ Note 1259515 - 'clusterSyncMode' is available as service property|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1259515]

Issue with archiving (opentext) of adobe forms

Hi ,
We have an issue with archiving (open text) of adobe forms. When unfinished processes are restarted using Tcode /OTEI/PF_RESTART empty forms without data are archived. We are checking these forms using Tcode J6NY. PDF form is stored but data entered while processing the forms in portal is missing.
Any suggestion or help is highly appreciated.
Regards,
Kishore

Hi Prakash,
Do not use Data Binding tab to bind the Drop down,
Select Specify Item Values
There in binding tab specify binding and there are few more options to specify Item Text and Item Value.
Please find the below screenshot for the same.
Thanks & regards,
Rajkamal.

Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Urgent please
anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Sounds like the folder Write permissions issue described here with a solution:
"Some import operations were not performed" from camera import

File Sender channel stopped polling on FTP site

Dear all,
We have many file to Idoc interfaces running in production and all are they good.
Yesterday we faced one issue, one of the interface's sender communication channel stopped polling and didn't picked the files from FTP.
There was no error on communication channel monitoring and it is green.
We stopped & started the channel then started picking the files. But this is not usual behavior of file adapter.
We found one SAP Note 1083488, according to this note, we are in the latest SP level( PI 7.0 SP 14). So not required to apply this patch my case.
What should i do to not to face next time
Regards

Hi Bhavana,
Check the below Q & A.....
>> Q: After configuring a large amount of File Adapter sender channels, the J2EE Engine becomes very slow and some services start to block. How can I solve this issue?
A: Up to and including XI 3.0 SP13 each File Adapter sender channel permanently consumes a J2EE application thread. To solve this issue, increase the number of configured J2EE application threads using the SAP J2EE Engine Config Tool ("cluster-data" -> "Global server configuration" -> "managers" -> "ApplicationThreadManager" -> "MaxThreadCount").
Starting with XI 3.0 SP14 / PI 7.0 application threads are allocated on demand by the File Adapter and returned to the thread pool after it has finished the polling sequence, so thread shortage situations will typically occur much more rarely than with earlier SPs.
Also as said by Other SDN'ers check the locks.
Thanks,

Multiple issues with Creative Cloud File Syncing

I'm have issues with syncing files on my mac to Adobe Creative Cloud. I don't seem to have issues syncing via drag and drop to my web browser. I keep getting this error while syncing via finder:
I also have a fairly complex PSD with folders that i'm toggling on and off using Layer Comps. I don't see any difference when switching Layer Comps within Extract in the browser. I do see the changes when turning on and off the folders though.. What's the deal with that?
Why does it take so long to render the PSD after I turn on a folder or switch layer comps? It takes about 30 seconds to re-render, which is crippling for our workflow.
This would be an amazing tool for our developers if these 3 issues were resolved.

Thanks for the information.
Could you now send me some log files please..
The log files can be found here:
Mac: /Users/<yourusername>/Library/Application Support/Adobe/CoreSync/
Windows: C:\Users\<yourusername>\AppData\Roaming\Adobe\CoreSync\
The logs have the date in the filename, like "CoreSync-2014-03-25.log". Please compress (zip) all the CoreSync-2014-MM-DD.log files and email them to me directly at [email protected]
Thanks
Warner

MDM lookup parameters from File Sender Channel

Hi SDNers,
In my current assignment I am required to make an SAP MDM lookup in a JAVA Mapping to fetch certain details to further process the message.
Currently the MDM server details along with user id and password are maintained in a properties file.
During Migration from Development to Quality or from Quality to Production Environment this properties file needs to be changed and the mapping needs to be reimported individually in each environment.
I want to avoid this cumbursome task of changing the properties file and re importing the Java Map on each environment.
Is there any way to mention the following 3 parameters in the Sender Channel itself (in my case it is FIle Channel)
Server IP Address, User ID, Password? so that the Java Map at runtime can access these parameters from the channel, as each environment will have different channel.
I don't know if I can use ASMA or Additional Parameters for achieving this.
Regards,
Gautam Purohit

Hi Michal,
Can you please elaborate this?
I need to give parameters like;
mdm.repository.host=Development_Server
mdm.repository.name=Development_Rep
for all three environments.
How can I achieve this using Value Mapping?
Regards,
Gautam Purohit

Issue with Archiving printlist

Hello,
On one of our Production system, we have an issue for archiving printlist.
We are using option Print immediatly, Print only on a specific output linked archive process with a specific doc. type.
We ahave checked as well the content repository which seems correctly configures.
We are using opentext solution successfully on others systems to do the same and customizing seems equivalent on both systems, and we are not able to find the reason why it is not working.
Spool is considered as " Transferred by Command to the Host Spool" but not completed and we have nothing on dedicated archived directory.
Did anyone already faced to that message ?
best regards
P. alexandre

The result is identical, I got two lines in SP02 :
One for archiving with same status and message and another one status"completed" because it has been printed
I imagine that the message "transferrred by command to the hist spool" is corresponding to a missing customizing to go on further...
EDIT
The archived printlist is generated on the shared directory but not visible as archived file. A link seems to miss between SAP and Opentext server : the issue is more on opentext side....
Edited by: Philippe ALEXANDRE on Sep 1, 2009 11:06 AM

Issue with archiving in file sender channel

Similar Messages

Maybe you are looking for