Issue with Attrbute Change Run in BI 7.0

Hi All,
I have loaded a few master data objects as well as some custom master data objects and have found that they do not always show up in the list when you go to apply the attribute change run to something you have just loaded. 
For instance I have just loaded a custom object from a DSO and if I click on manage on the attribute the load is there but I am not seeing any data in the object, then if I go to apply the attribute change run in the tools menu.  The infoobject does not show up in the list???
Has anyone else run into this issue.  I have done a search but could not find anything that answered my question.
Thank you!
Caroline

Hi Caroline,
If the hierarchies and attributes of characteristics that belong to an InfoCube have been changed, you have to make structural changes to the aggregates to modify the data accordingly.
In this task, you can perform the attribute change run ad hoc.
http://help.sap.com/saphelp_nw70/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
After each full load of master data, if you want to run attribute change run for an object eventhough the object does not show up in the list.  Go to se38 Execute the program RSDDS_AGGREGATES_MAINTAIN. In selection, Info object list - enter the infoobject name then execute it. Will give a pop-up message Hierarchy/attribute change successfully carried out.
Edited by: Priya.D on Mar 11, 2010 6:16 AM

Similar Messages

  • Issue with Attribute change run

    Hi All
    today one of my team memeber has killed attrribute change run, after that when we tried to use option maintain master data, a message were coming attrtibute has cancelled, please re run, even we were not able to load same infobjects, getting message, master data is locked, when it tried to see data in p table then i was getting few entries having delate and insert image( example for infoobject 0customer for customer number c100 two entries one with d flga other one with in flag.)
    First i went in t code se14, i put all tables name then cliecked on activate and adjust data.
    Even though problem persist,
    Also i was not getting any infobjects in lsit( from rsa1-> tools-> attr change run)
    Then i created one dummy process chain with process type attr change run and included only inoobject with which i was facing data load issue.
    Please advice on my step.
    Thanks,
    Prem

    Hi,
    Goto RSATTR Tcode -> Click on Tab Monitor and Start Terminated Change Run -> system will open a new screen -> here you can see the failed change run, please rerun this failed change run and then try to load data, after successful change run things will be normal.
    SAP Clearly suggest  NOT TO KILL OR CANCEL Change Run Job. If this don't solve you issue, you may need to look for some SAP Note.

  • Issue with PO change output - Service line items

    Hi All,
    This is issue with PO change output. We have PO with line item 10, 20 and item 10 has 4 service line items. PO is approved and initial print out is taken.
    Some one goes and makes changes to 1st service line items of PO line item 10.
    A change output gets triggered. When this output is printed, it prints line item 10 details. This is standard functionality as this item is changed. But its printing all the service line items for this PO line item. Consider a case where there are 3000 service lines for a PO item. If I add 1 service item to this PO line item, the change form prints 3001 services for that line item. There were no changes done to first 3000 service line items.
    Currently PO change form takes care of changes at PO line item but it does not take care of changes at service line item level.
    Is there any setting that needs to be done for this so that it only considers the changes at Service line item level also.
    Regards,
    Shahu

    If you're using a standard form, send a message to SAP. Otherwise make a change in the form.

  • Regarding the Cheque printing in SAP Script. Issue with Layout Change.

    I have to modify the layout of a predeveloped script.
    The issue with the existing one is that, the Labels (on the window, that is printed) and the data (corresponding to it) are not on the same line.
    To be more clear, I have like this on the cheque,
    Payee : _______________________
    Amount : ____________________
    The Data corresponding to the Pay & Amount is not in the respective line (as I shown above).
    How can I get that both on the same line.?
    Shall I need to modify the layout or what else to do ?
    Pls. guide me.
    Your guidance is appreciable.
    Edited by: ravikanth seal on Mar 9, 2011 5:09 AM
    Edited by: ravikanth seal on Mar 9, 2011 5:10 AM

    Hi niraj gadre ..
    Ur idea may not workout fir me.
    My idea is :
    Can I use any formating options in the corresponding window's text elements..
    Pressing F9 on the windiw (in the Windows list) displays the Text Elements (Goto Edit-> Text Elemets on the Window chosen) in the Windows list.
    Here can we do any formating options, so as to change the layout alignment of window's Text Elements ??
    Guide me please.
    Your guidance is Appreciable
    Thanks.
    Edited by: ravikanth seal on Mar 9, 2011 7:55 AM

  • Error in process chain with attribute change runs

    We have one warning is coming in one process chain :A type "Attribute Change Run" process cannot precede process "Execute InfoPackage"
    We checked the Process View , we found that there are number of attribute change run after each scheduling of Info package with different datasource but for same data target.
    How to remove this warning .
    Some onsite person has added this extra Attribute Change Run recently.

    Hi Surendra,
    If it is the same Info-object that is getting loaded through different Info-packages then have only 1 "Attribute Change Run" process at the end. You can ignore the warning.
    Bye
    Dinesh

  • Aggregates with Attribute Change Run and Master data

    Hi !
    I created Aggregate which includes Master Data such as Customer , Customer Number , Material , Material Number.....
    It also contains navigational attribute and hierarchy...
    Now we all know that if Master data and Hierarchy changes frequently(or some new values are added or new attributes are added etc.) we want to see the respective change in Aggregates too
    So just Rolling up aggregate will not help.
    We need to apply Attribute Change run for this purpose, to aggregates..
    Now the question is HOW TO  APPLY ATTRIBUTE CHANGE RUN to aggregates?
    How to automate this process with Process chains..?
    If i create Aggregate on Master Data CUSTOMER NO., DOES IT AUTOMATICALLY INCLUDE THAT AGGREGATE IN ATTRIBUTE CHANGE RUN FOR THAT CUSTOMER NO. PROCESS CHAINS ?   Yes or No..........
    (What i mean to say is if there is Attribute Change Run for Customer No. and if this is in Process chains specially created for Customer Number , than as aggregates are created on  Customer No., does i t automatically applies and make changes to Aggregate too, or do we hvae to create special process chian for it ?)
    Please reply asap ? its urgent

    hi,
    check these links for attribute change run
    What's the attribute change run? and the common sequence of a process chain
    http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
    regards
    harikrishna N

  • Error with Attribute Change Run - Urjent

    Hi All,
    In our scenario we will  load  master  data from APO&ECC to BW.When we are doing attribute change run we are geetting short dump and jobs are cancelling every time .
    Please fidn the details below.
    Short Dump : ORA-14400 with ABAP/4 DBIF_RSQL_SQL_ERROR..
    When I have searched in the forum I got some information saying that we need to drop the index and recreate  the index.But we have around 40 cubes.Then how I am going to deside on which I need to the relavent settings.
    Please provide me the proper answer.We are facing this problem from past last two  days.
    Regards
    Ramakanth.

    Hi,
    You can try going to the monitor for Attribute change run from RSA1 >> tools >> apply change run or from Transaction RSATTR which will schedule/display attribute change run. Here you can have an option called change run monitor (Monitor icon). this wil show the status of change run including which all info objects are affected, and if its hitting the aggregates of any cubes. There are scenarios where the attribute change run failed with message that it was hitting/affecting aggregates of some infocubes. In case we had to switch off aggregates and trigger the change run again and then swtich on the aggregates after the change run is over.
    And sometimes ACR goes on running for a long time in such case we need to check which Aggregate the ACR is currently changing and need to deactivate that aggregate.
    But before deactivating an aggregate you need to check the data present in that and the usage of the aggregate.
    Please use the table RSDDCHNGPROT and find out the infocube affected by this change run and de-activate "ALL" the aggregates
    of the infocube listed under CNSID=0. Then start the change-run.
    You can rebuild/refill the aggregates once the change-run is finished.This is necessary because there are inconsistencies in the aggregates
    Most of the times we have problem with the Attribute Change Run(ACR) running because ACR and the Roll Up's for Aggregates cannot run in parallel.
    Also you can try Tcode CHANGERUNMONI/program RSDDS_CHANGERUN_MONITOR to view this data.
    176606 - Apply Hierarchy/Attribute change ... long runtime
    175309 - Hierarchy/attribute - change run improved
    oss note 322644
    Hope this helps.
    Thanks,
    JituK

  • Email issue with password change

    I recently had to change my email password.  Now I can't get mail on my IPad.  When I go to settings under mail, contacts, calendars, it is not highlighted and will not let me open it.  I have the same issue with messages and facetime not being highlighted.  My email works fine on all other devices, including my iphone.

    Do you currently have Settings > General > Restrictions > Accounts (under the 'allow changes' heading) set to 'Don't Allow Changes' ? If you do then change it to 'Allow Changes'

  • Provisioning issues with password changes

    I have installed and configured IDM7.1+sp3 with our AS Java portal. Most features seems to work OK, except:
    1.1. Changing fullname, display name, address, etc work - but salutation or title info doesn't display correctly (only when language independant).
    1.2. Can lock the user - but not unlock.
    1.3. Can change password (self service or via Management tab) - but password "disappears" and user can't login again via the UI or directly thru the LogonGUI.
    1.4. If the user's password expires, he gets prompted to change it - this change works fine.
    After "devouring" all the documentation I could fine... I read in the Release Notes the following:
    2.1. Users are authenticated by the SAP NetWeaver AS Java (and not by the Identity Center). The password policy of the Identity Center is not used.
          = enabling or disabling "password provisioning" in the Password Policy tab makes no difference then?
    2.2 The login task does no longer exist since the authentication is done by the SAP NetWeaver AS Java (UME).
          = ok I get this part...
    2.3 Change of password is handled by SAP NetWeaver AS Java (UME) and the change password task is no longer available.
          = so the Password Reset tab is also "pointless"?
    2.4 A user's MSKEYVALUE is used as the UME logon ID.
          = right
    2.5 Password reset is handled by SAP NetWeaver AS Java. See SAP NetWeaver Identity Management Identity Center Implementation Guide u2013 Self-service password reset for details
          = (what should I do with this?) I did get this working but stopped with some error about the "encrypt password".
    My SAP landscape is pretty standard (no custom fields/attributes) - so the IDM Provisioning framework should work "out of the box" - in my understanding...
    Any ideas?
    Sorry about the multiple postings - issue with proxy server. Pls ignore/remove the extras.

    Hi.
    I try to give some answers based on my experience below:
    1.1. Changing fullname, display name, address, etc work - but salutation or title info doesn't display correctly (only when language independant).
    >> Have you checked that the user has correct language set in Java UME? Also check that in Presentation page of the corresponding Attribute the Display name parameter is set with corresponding languages used.
    1.2. Can lock the user - but not unlock.
    >> Can you see any errors e.g. in Job Log? Would help to solve the issue
    1.3. Can change password (self service or via Management tab) - but password "disappears" and user can't login again via the UI or directly thru the LogonGUI.
    >> The reason might be the encryption of the password. Typically the UI should take care of the encrypting the password into MX_ENCRYPTED_PASSWORD attribute, especially when you're implementing tasks like Self Service Password Reset. I've noticed that when I disabled the Enable Password Provisioning option for the Identity Store, I got rid of the error regarding attribute MX_ENCRYPTED_PASSWORD and UI automatic encryption started to work. (In my case two way pwd provisioning is not needed) Otherwise if you have issues with encrypted password in your custom tasks, check whether the value is encrypted and use java script to encrypt the password when reading the value form the UI field and saving it to MX_ENCRYPTED_PASSWORD attribute, if applicable.
    Hopefully this helps you even a bit.
    Br. Jukka

  • Issues with speed changing on clips

    i have a issue with speeding up clips. ive exported a slideshow and them imported it into imovie but noticed it was a bit too long..i tried speeding up the clip but when i do and try to play the clip it just shows a black screen..however if i hit backspace and revert it back to original it plays fine..any ideas whats going on? this is soo frusterating to go back and for between the two programs and be off by a few seconds? ?thanks

    well the audio built into the slideshow clip im not worried about..but yes bascially its a bit too long..and for some reason the speed tool will change the width of the clip to a perfect length but then when i go to play on it and check it..i just get a black screen..its just quite irritating to have to go back and forth exporting and cause im 8 seconds to long or whatever you know. thanks everyone hopefully my descrition is better this time.
    i have to try a regular video clip and see what happens..it may only be a iphoto slideshow issue.

  • Problem with hierarchy change run in aggregates

    Hi,
    I have made changes in Cost center hierarchy (infact I have included 2 cost centers in a seperate node). After it I loaded hierarchy into BW through Process chain. Process chain uses Attribute/hierarchy change run process. Consequently Cost center hierarchy is loaded into BW successfully.
    In Cost center master data, hierarchy table, i can see two new records for these added costcenters in Active status. It means hierarchy change has worked properly.
    I have also read that hierarchy change run automatically reflects the changes in Aggregates, that are using Cost center info objects.
    But my problem is I did not find new added cost centers in any aggregate using cost center info object. Though it should be taken care by Attribute/hierarchy change run.
    Please suggest, if I make any change in source system hierarchy, then how and when it will impact aggregates ? How can I test that hierarchy change has impacted aggregates ?
    Thanks and Regards
    Saurabh

    Hi Fede
    Did you manage to solve your problem?
    I have a similar situation where the technical ID of the hierarchy is set as default value for the hierarchy variable in the variable input screen.
    I have noticed that if I un-check the option "Suppress 'Unassigned' Node" in the Hierarchy Attributes Settings in RSH1, then the default value is gone, but I would like to have it checked in order not to display the unassigned nodes for the end users.
    Any help or comments on what you have done to overcome this problem would be jhighly appriciated.
    Thanks.
    Regards
    Peter

  • Attrbute Change run

    An info object was loaded from R3 which had 50 data packages. When it was loading 40th package, it created a lock by itself and didnt complete updating 40th package. Lock was from attribute change run.
    Does it try to do attribute change run in the middle of the load?

    Hi......
    It seems some attribute change run is running......
    Go to SM37 >> in the Job name field give BI_PROCESS_ATTRIBCHAN........Then check how many change run are running........If more than one is running....then select the job >> in the top click on step >> go to in the top >> variant.....from here you can see in which Process chain the change run is running.....check each chain...........
    In the Process chain >> right click on the attibute change run process >> Display variant.........from here you can see whether this change run is activating your master data or not......If nothing is maintained in the variant........it means that this change run activate all master data which are pending to activate........wait for the completion of the change run........
    Some times it happens that load gets locked by failed attribute change run(if someone cancel an attribute change run lock does'nt get released).....in this case you have to again repeat the change run.........
    If the attribute change run is not a part of a process chain......someone has ran it manually for the said infoobject.......and due to some reason cancel the change run.....then you have to again run change run for this infoobject.....
    This you can do from RSA1...........or you can use the program : RSDDS_AGGREGATES_MAINTAIN
    Hope this helps you.....
    Regards,
    Debjani.......
    Edited by: Debjani  Mukherjee on Sep 23, 2008 8:00 PM

  • Compatibility and LMS issues with Flash WBTS running in IE11

    Our IT department recently ugpraded our corporate browser from IE8 to IE11. Since then, we have beeen having several problems with some of our Flash WBT courses:
                   - upon completion of the course, communication with our LSO (SAP) is not made so the courses are not marked as complete
                   - a few courses having video (FLV or F4V video) are having problems in loading and playing the videos. Changing the Compatibility Setting to Enterprise seems to solve the
                     problem, but it's a case-by-case fix.
    These courses experienced no problems prior to IE11. We've been working with our IT department, and have begun discussions with MicroSoft, but so far no luck. Everyone seems to think that the problem is in the way that the Flash Player is working, or not working, in IE11. I believe that we're using Flash Player 11 as our corporate standard. Has anyone else experienced similar problems in running their Flash courses in IE11?
    Thanks.

    Each version of Flash Player includes important security fixes.  If you're really using Flash Player 11 as your corporate standard, you're vulnerable to a large body of publicly disclosed issues which have been resolved in current versions.  I doubt that this is actually the case.
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer.   Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    There's some decent guidance here, but the bottom line is that a lot of content will need to be patched to work in the world of IE11+.
    Internet Explorer Dev Center
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

  • Issue with the change pointer  for the reduced message type ZMATMAS

    Hi All,
    I have created reduced message type ZMATMAS for the MATMAS to create a Idoc when change or insert material master data fields( MARA-LAENG, MARA-BREIT, MARA-HOEHE) . My Problem is that the Idoc is generated with the status (03) but the fields(LAENG, BREIT,HOEHE)  are not getting fill with the values. They are always filling with the values  '/'). I have done the following steps to create idoc for the change pointer. Please check whether i have missed some steps.
    1.     Create reduction maintenance ZMATMAS  (Tcode BD53)
    keep the default selected segments E1MARAM, E1MAKTM
    2.     Add following data to maintain table view for the message type ZMATMAS  (Tcode BD52)
    Object      Table Name     Field Name
    MATERIAL       MARA      KEY
    MATERIAL     MARA     LAENG
    MATERIAL     MARA     BREIT
    MATERIAL     MARA     HOEHE
    3.     Activate particular change pointer in BD50
    Message Type       Active
    ZMATMAS         yes
    4.     Activate change pointers u2013 Generally (Tcode BD61).
    5.     Assign Segment fields to change document fields (Tcode BD66 )
    Segment Type     Field Name     Object     Table Name     Field Name
    E1MARAM     BREIT     MATERIAL     MARA     BREIT
    E1MARAM     HOEHE     MATERIAL     MARA     HOEHE
    E1MARAM     LAENG     MATERIAL     MARA     LAENG
    6. I have done the distribution model settings (BD64) and  the idoc configurations
    1.     Logical System
    2.     RFC destination
    3.     Create port
    4.     Create partner profile
    7. I changed the fields in material master data(Tcode MM02)  and I executed the Tcode BD21.
    Idoc is generated but the fields are not getting fill with the values
    (Note: some fields  are filled with values e. g material number, material description)
    I checked the Idoc data segment E1MARAM (WE02)
    Fld name   Fld cont.
    LAENG       /
    BREIT       /
    HOEHE      /
    Can you please let me know the issue
    Prad

    Issue is solved when I select the segments and the fields in the segments (Tcode :BD53)
    Prad

  • Has anyone else had issues with their Mac running slowly after installing Mavericks?

    Ever since I installed Mavericks, my MacBook is running waaaaay slower. One of my favorite things about Macs has always been how fast they boot up, but ever since Mavericks, mine takes forever. A lot of programs like GarageBand and Premiere Pro are also running really slowly. They used to work great. Anyone else having this same issue?

    The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

Maybe you are looking for