Issue with Attribute - BUK

Hi ,
Company code attribute is not picking when i tried to raise the shopping cart, saying that no values found. I have already assigned the Company code attribute(BUK) in the Org structure. Also i have assigned the Location in the extended attribute.
I m facing the only in the QA box and there is no issue in DEV
Help is much appreciated.
Regards,
Mathai

Hi Mathai
I double confirn that this error is due to missing configuration in
define backend systems for product categories in SRM system
product category source system target system.
"No values found" in plant (location) during SC creation
Muthu,
The issue is solved.
Someone defined our SRM system as target system for backend documents, thus the system found always our SRM purchasing group.
Customizing: Define backend system for product categories was set:
material groups
ECCTST (source system) = OK
SRMDEV (target system) = WRONG.
Thanks for your replies.
Franz
please close the thread. it helps others to resolve the issue ASAP.
br
muthu

Similar Messages

Import Issue with Attributes

Hi everybody,
during import of approx. 16.000 records I am facing an issue concerning the attributes. The input file is an Access database, which was exported from another repository. Now, I am using Import Manager to re-import this file into a new repository. The taxonomy and the allocation of attributes in this taxonomy are the same. However, when I import the data, some products have wrong attributes attached to them with wrong values. I already tried to do a two-step import (first product data, then attributes). The same problem here. In the Access file all records are correct. Any ideas?
Best regards
Christian
Edited by: Christian Heuer on Mar 31, 2009 12:15 PM

Hey gimnos,
Thanks for the question. I understand you are experiencing issues importing a CD to iTunes for Windows. The following resources may provide a solution:
iTunes 11 for Windows: Import songs from CDs
http://support.apple.com/kb/PH12486
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thanks,
Matt M.

Mdls command: issue with attribute "kMDItemTotalBitRate" output

All,
I 'm using mdls command to fetch the Total bit-rate for all media files(mp3,mov,m4v etc.). I want to compare the output with a set threshold (XY Kbps) and raise a flag if the bit-rate exceeds XY for a media file. The issue is that the output doesn't denote if it's in Kbps or bits per second. For example I ran the mdls command on 2 files test1.m4a and test2.mp3 :
   mdls -name kMDItemTotalBitRate test1.m4a
   Output -> kMDItemTotalBitRate = 249
   mdls -name kMDItemTotalBitRate test2.mp3
   Output -> kMDItemTotalBitRate = 192000
On checking in iTunes , I saw that the number was 249 Kbps for the former and 192 Kbps for the latter. How can I force the mdls command to output kMDItemTotalBitRate in bits per second only so that the output is uniform for all files and removes confusion?

Hi,
test1.m4a is a song I purchased from iTunes Store. Its not just this file. I have many other files(m4v,m4a etc.) where the kMDItemTotalBitRate output is similar to test1.m4a above. As a result of this, I can't compare the bitrate reliably against my threshold XY. I'm using the command afinfo now to get the bit rate in bits per second for audio files. I need to find a similar command for video files

Issue with Attribute change run

Hi All
today one of my team memeber has killed attrribute change run, after that when we tried to use option maintain master data, a message were coming attrtibute has cancelled, please re run, even we were not able to load same infobjects, getting message, master data is locked, when it tried to see data in p table then i was getting few entries having delate and insert image( example for infoobject 0customer for customer number c100 two entries one with d flga other one with in flag.)
First i went in t code se14, i put all tables name then cliecked on activate and adjust data.
Even though problem persist,
Also i was not getting any infobjects in lsit( from rsa1-> tools-> attr change run)
Then i created one dummy process chain with process type attr change run and included only inoobject with which i was facing data load issue.
Please advice on my step.
Thanks,
Prem

Hi,
Goto RSATTR Tcode -> Click on Tab Monitor and Start Terminated Change Run -> system will open a new screen -> here you can see the failed change run, please rerun this failed change run and then try to load data, after successful change run things will be normal.
SAP Clearly suggest NOT TO KILL OR CANCEL Change Run Job. If this don't solve you issue, you may need to look for some SAP Note.

Issue with employe attributes in SRM

Hello All,
In ECC HR Organization structure, multiple employees are assigned to
single position. The organization structure along with employee data is
replicated from ECC to SRM as it is with the help of ALE Standard
interface and PFAL execution.
Issue: Since attributes are assigned at employee position level in SRM
unlike at employee level in ECC HR. If attributes such as company code,
currency, cost center delivery address are different for each employee
in ECC HR and the how can these be assigned to a single position in SRM
org structure as a default attribute for each employee?
SRM Version 7.13 SP02.
Appreciate your help.
Thanks & Regards,
Phanidhar Maddi

Hi Konstantin Anikeev ,
Thanks. We could see that ECC organization structure is replicated as it is to SRM System ( multiple employees assigned to single position) and employees are able to create SC with out any issue. The default attributes are assigned at employee position level.
The challenge is : In case multiple employees assigned to single position are maintained with different values such as company code and delivery address in ECC and which are replicated to SRM system, how to set default values for each employees?
Regards
Phani

Issue with URL attribute in Header

Hi,
I am facing an issue with the URL attribute.
I have created an header attribute #HDR_TEST_URL and selected the type as URL.
Given a default value as http://www.google.com as the url
Associated this attribute to the Notification message.
But in the notification, the URL is being shown as the plain text not as a link.
Can you please let me know what I am missing here.
Thanks

Please check the notification format if it is text then it might not be shown as a url but if it is HTML it might show up, if it is not showing then i would recommend using the anchor tag to create the Hyperlink.
Regards,
Varun

Keychain Issue with Entourage SMTP password or port attribute

I am posting this under Using OS X rather than Mail since I do not
use Apple's Mail. The problem is the Microsoft Entourage or something
may be sending bad information to the OS X keychain and this prevents me
from sending mail to my ATT/Yahoo account. The workaround I have
been using to send mail is use the OS X Keychain First Aid repair.
After the repair Entourage will send the message one or two times then
I get the following Keychain verification error note:
Item “pop.att.yahoo.com” has unspecified value for port attribute
Item “smtp.att.yahoo.com” has unspecified value for port attribute
Problems were found; you should choose the Repair option to fix them
Verification failed.
The Repair option corrects the problem until the next message is
sent. I have done everything I can think of to the Entourage v12.1.7
settings and something is still not right.
I am beginning to suspect a Keychain bug or error but have no idea
how to get the correct attribute written to the keychain.
Maybe someone could provide some terminal commands to the will
help me write the correct password and port attribute to the keychain.
I am open to any suggestions to clear being nagged every time I
need to send a message to enter my password. The POP mail works
fine. This seems to be an issue with the password that is required
by the ATT/Yahoo smtp server.

If you are sure your primary account is setup correct (per the above URLs), open
the Applications/Utilities/Keychain Access.app and go to Keychain Access/Keychain
First Aid and click on the Verify and Repair if necessary.
FYI, Entourage will write errors to the keychain if you have the account setup wrong.
My error (that cause the keychain errors) was I typed in the my ID and password in
the smtp option. Check the box to use the received and do NOT type in the address.
When you save the settings with nothing in the boxes, Entourage will do it for you
and it will work.
I don't know why but it will not work if you type in the info. Just follow the rules
and it will work
Try It!!
Message was edited by: aRKay

Issue with working on a webservice that has xml elements with attributes

This is a branchout of Thread: Some more complex sample of invokin WS needed_
We are working on a project that involves a outbound SALT Web service call that includes complex elements with attributes..We are looking for options of how to use FML API's to pass these attribute values from the application code.
We opened a ticket with oracle where we were suggested to frame the entire xml and pass the xml using the FML32 of the complex element. But when we framed the xml for Service and put the entire XML which includes the attributes using the FML ID of Service.
Please find a sample Schema and XML similar to the one we are working on...its associated code
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
     <xs:element name="Service" type="Service_Type" nillable="true">
          <xs:annotation>
               <xs:documentation>Comment describing your root element</xs:documentation>
          </xs:annotation>
     </xs:element>
     <xs:complexType name="Service_Type">
          <xs:sequence>
               <xs:element name="DateTime" type="xs:dateTime" nillable="true">
               </xs:element>
               <xs:element name="UUID" nillable="true">
               </xs:element>
               <xs:element name="Status" type="xs:string" nillable="true" minOccurs="0" maxOccurs="unbounded">
               </xs:element>
          </xs:sequence>
          <xs:attribute name="Version" type="xs:string" use="required">
          </xs:attribute>
          <xs:attribute name="Name" type="xs:string" use="required">
          </xs:attribute>
     </xs:complexType>
</xs:schema>
The sample XML is :
___<?xml version="1.0" encoding="UTF-8"?>___
______
___<Service Name="TestService" Version="1.1" xsi:noNamespaceSchemaLocation="Untitled6.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">___
___     <DateTime>2001-12-17T09:30:47Z</DateTime>___
___     <UUID>text</UUID>___
___</Service>___
wsdlcvt generated the mif file with Service as a FML32 type and all its child elements as "mbstring". We tried to leave as it is and we also tried to replace all the child elements and just had a mif entry for "Service" as a mbstring neither produced a different output...Tried to dump using Ferror32 which did not dump any..._
The sample C/C++ code as per suggestions were to do the following...
_1) Have a string with the entire XML for Service_
xmldata="<Service Name=\"TestService"\ Version="1.1\"_ xsi:noNamespaceSchemaLocation=\"Untitled6.xsd\" xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\">_
_     <DateTime>2001-12-17T09:30:47Z</DateTime>_
_     <UUID>text</UUID>_
_</Service>";_
_2) Use Fmbpack32 to create a mbstring data_
_memcpy(reqmbptr, (char*)xmldata.data(),xmldata.length());_
_len=xmldata.length();_
_Fmbpack32(mbcodeName,reqmbptr,len, packdata,(FLDLEN32 *)&packedlen,0);_
userlog("Size of packedlen is %d",packedlen);
3) Add the packed data to the output buffer
Fadd32(fmlbuffer,Service, packdata,packedlen );
But we do not see the Service tag populated in the GWWS outbound request.Everything else makes it....any help on how to move ahead would be appreciated...

It seems you switch to the 10gR3 GA and now the whole XML data is mapped to FLD_MBSTRING.
I will forward my sample to you by mail, but this sample is not offical sample, it is just QA test case. You can refere it and check what's the difference.
Please let me know your mail address.
Regards,
Xu he

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

Issues with setting "Album Artist" in iTunes 9.2.5.1 on Windows 7

I googled this for a while but haven't been able to find this issues mentioned anywhere else yet. Here's what's happening: I am importing CDs to iTunes 9.2.1.5 on Windows 7 Pro (64 Bit) using MP3 Encoder > Higher Quality. All is well except for a few CDs where I'd like to set an overall Album Artist. Example: Tony Bennett's Duets: An American Classic. When importing the CD it shows up under "Various Artists" since "Artist" is always Tony Bennett plus whoever he sings with. To make sure the album shows up under Tony Bennett in the library I click on the album and set "Album Artist" to Tony Bennett. That, however results in changing the "Artist" field as well now so all fields say Tony Bennett, which shouldn't happen, "artists" should stay unchanged. I tried this with several albums and the behavior is always the same.
I also tried the back door by going into the actual folder of the album in Windows then change the MP3 details and populate "Album Artist" there for all tracks within the album. Once I re=open iTunes it registers the change only for the first track but not the rest. So I re-import the folder into iTunes and then it does take "Album Artist" and also leaves "Artist" unchanged but for some reason has now lots of numbers under "Comments". There seems to be a mismatch of the field attributes between iTunes and Windows for MP3 files (possibly other formats as well). Wondering if anyone else has observed this or if I am just missing some setting.

FYI iTunes handling of ID3v2.4 tags seems to have some issues as well... Translating genres into their numeric codes for one thing. I'd recommend sticking with v2.3.
I'm not exactly sure from your posts what you were seeing. Was the artist being changed in Get Info. after you'd set Album Artist, or was it changing elsewhere on screeen? iTunes 9(.1 I think) added an option *View > Column Browser > Use Album Artists*. Unfortunately this doesn't change the heading of the column so that you "see" it is now only listing album artists but that's what it does.
There is also an occasional issue with the current build in that sometimes changes to Album Artist or Sort Album Artist fail to be reflected properly in the column browser until iTunes is closed and reopened.
tt2

An issue with authentication and authorization on ISE 1.2

Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
end

Yes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.

Issue with File Download(messageDownload) on Search Page.

Hi,
I created a custom OAF search page which fetches values from one table. The document in getting stored in my custom table in a BLOB colums and NOT in FND_LOBS.
The table has 3 collumns along with others:
1st is primary key (Record_Seq) ==> number data type
2nd to store actual file name (File1Name) ==> varcahar2 data type
3rd to store the actual uploaded data (File1Data) ==> BLOB data type
The reason for having the “File1Name” is so that I can display the original file name of the document that was uploaded, instead of just the “view” in the search page results .
On the File1Data BLOB and created a messageDownload for that under query results table with following details:
ID : File1Data
ItemStyle : messageDownload
FileMIME Type : pdf
Datatype : BLOB
View Instance : LacEmpExposureVO1
view Attribute : File1Name
File View Attribute : File1Data
When I click on the "File1Name" data hyperlink, it is opening only the first document corresponding to the first record in the search page results.
For example, If my search page returns 10 rows then when I click on the file1name on any row, It is open the first row file name only.
I have a primary key column(RECORD_SEQ) in the Table / EO / VO which is displayed in the search page results.
Also one weird thing is happening:
If I try to do this more than 2 times then it is opening the update page with the first record from the search page results…
I tried to print the context and it is nul the first time, But the second time then context is changing to "update". Dont know how this is happening????
Any advice is greatly appreciated as it is very crucial for me to get this resolved ASAP. I have looked at several forums and did a lot of things as advised in the forums . But nothing seems to work for me.
Thanks,
Mir
CO code for the search page
===========================
if (pageContext.getParameter("Create")!= null)
System.out.println("Into LacEmpExposureCO in PROCESS FORM REQUEST with Context of CREATE");
pageContext.setForwardURL
("OA.jsp?page=/lac/oracle/apps/lac/lacempexposure/webui/LacEmpExposureCreatePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, //Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
else if ("update".equals(pageContext.getParameter(EVENT_PARAM)))
System.out.println("Into LacEmpExposureCO in PROCESS FORM REQUEST with Context of UPDATE");
System.out.println("LacEmpExposureCO ==> RecordSeq in PROCESS FORM REQUEST is: " + RecordSeq);
HashMap params = new HashMap(1);
params.put("RecordSeq", RecordSeq);
pageContext.setForwardURL
("OA.jsp?page=/lac/oracle/apps/lac/lacempexposure/webui/LacEmpExposureUpdatePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
params,
true, //Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO, // Do not display breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
else {
String strEvent = pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM);
System.out.println(strEvent);
System.out.println("Into the last ELSE part in LacEmpExposureCO.java");

Duplicate post -- Issue with File Download(messageDownload) on Search Page.

Som issues with Nvidia GTX960 - dmesg error output posted

I have some issues with icons not showing up, eg. in pamac. Just red crosses or what it's called.
Here is my dmesg error output.
$ dmesg --level=err,warn
[ 0.000000] ACPI: RSDP 0x00000000DD7F6000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD7F6080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD8041A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DD7F6198 00E009 (v02 ALASKA A M I 00000031 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DDD45080 000040
[ 0.000000] ACPI: APIC 0x00000000DD8042B8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD804350 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000DD804398 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD8043F8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD804938 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: MCFG 0x00000000DD805410 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DD805450 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD805488 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD8057F8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000DD808D38 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.006274] ACPI: All ACPI Tables successfully acquired
[ 0.014978] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014978] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.016204] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.102300] #2 #3 #4 #5 #6 #7
[ 0.263542] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.265355] ACPI: Dynamic OEM Table Load:
[ 0.265358] ACPI: SSDT 0xFFFF8807FA42A800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.265733] ACPI: Dynamic OEM Table Load:
[ 0.265736] ACPI: SSDT 0xFFFF8807FA419800 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.266134] ACPI: Dynamic OEM Table Load:
[ 0.266135] ACPI: SSDT 0xFFFF8807FA46DA00 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.267060] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.267063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.285136] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.793801] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794140] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794388] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.794391] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.795480] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.795482] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 1.018384] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.018386] usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.040606] systemd-journald[181]: Failed to set file attributes: Inappropriate ioctl for device
[ 1.114596] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 1.230333] nvidia: module license 'NVIDIA' taints kernel.
[ 1.230335] Disabling lock debugging due to kernel taint
[ 1.235547] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015
[ 2.072087] NVRM: Your system is not currently configured to drive a VGA console
[ 2.072090] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 2.072091] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 2.072091] NVRM: drivers including, but not limited to, vesafb, may result in
[ 2.072092] NVRM: corruption and stability problems, and is not supported.
My hardware is a desktop with i7 4790K (4 cores with HT enabled) ASUS Z87-K motherboard, 32 GB Corsair 1600 MHz RAM. Samsung 850 PRO 1 TB SSD.
My inxi -F
System: Host: archie Kernel: 4.0.5-1-ARCH x86_64 (64 bit) Desktop: Xfce 4.12.2 Distro: Arch Linux
Machine: System: ASUS product: All Series
Mobo: ASUSTeK model: Z87-K v: Rev X.0x serial: 130612439103584
Bios: American Megatrends v: 1402 date: 11/05/2014
CPU: Quad core Intel Core i7-4790K (-HT-MCP-) cache: 8192 KB
clock speeds: max: 4400 MHz 1: 4000 MHz 2: 4002 MHz 3: 4000 MHz 4: 4000 MHz 5: 4256 MHz
6: 4001 MHz 7: 4002 MHz 8: 4002 MHz
Graphics: Card: NVIDIA GM206 [GeForce GTX 960]
Display Server: X.org 1.17.2 driver: nvidia tty size: 108x41 Advanced Data: N/A for root
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel
Card-2 NVIDIA Device 0fba driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.0.5-1-ARCH
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <masked>
Drives: HDD Total Size: 1024.2GB (4.4% used) ID-1: /dev/sda model: Samsung_SSD_850 size: 1024.2GB
Partition: ID-1: / size: 48G used: 13G (27%) fs: ext4 dev: /dev/sda3
ID-2: /home size: 769G used: 154M (1%) fs: ext4 dev: /dev/sda4
ID-3: /boot size: 511M used: 25M (5%) fs: vfat dev: /dev/sda1
ID-4: swap-1 size: 33.55GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 172 Uptime: 10 min Memory: 1133.0/32119.5MB Client: Shell (sudo) inxi: 2.2.25
Have I missed something to post?
Last edited by dockland (2015-06-17 20:30:48)

I read that this line in my case
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
is a bug and unfixable.
What does that mean and why is it "unfixable"? Is that some hardware that is not compatible with Arch at all?

Issues with Approval Task IN IDM 7.1

Hi,
I have been facing issues with Approval task.
Firstly,
I have created an Approval task with 'Mskeyvalue' and 'Mxref_mx_privilege' as attributes.
I am having a problem in the Approvers workflow UI where, we see these approvals.
It not only displays the requested privilege,but also the already provisioned privileges of the enduser to the approver.
He will not be able to recognize which privilege has been requested.
Is this an already known issue which has been sorted out in recently updated patches?
If not can you suggest me a solution for this.
Secondly,
The privilege requested by the end-user is getting provisioned to the backend,even before it is Approved.
Since Provisioning tasks are mapped through repository,privileges are getting provisioned as soon as
an entry is made into the Identity Stores.
But,Ideally the requested privilege should not be proviosioned to the backend until it is approved by the Approver.
Is this an already known isuue which has been sorted out in recently updated patches?
If not can you suggest me a solution for this.
Thanks and Regards,
Joel
Edited by: Joel Sundararajan Davis on Jul 16, 2009 11:04 AM

Joel,
I'm afraid the approval process is not quite this simple. You are correct, if you have provisioning setup on the repository for a privilege it will be assigned immediately. The approval task as you are using it works as an 'interrupt' to a process - nothing more.
There is an entry type called pending value that you would need to leverage in order to have privileges requested route for approval. This pending value object is created by default for role requests in 7.1, but I'm not sure how to create a pending value for a privilege.
Which brings to mind a question - is there a reason you want users to request privileges instead of roles? In general I think the security model is setup so that users are assigned roles which contain one or more privileges.
If you do choose to use a role instead of privilege, simply set the attribute MX_APPROVAL_TASK to the id of the approval task you want to use and the system will do the rest. The display you referenced in the first part of your question will always display the current values of the attributes you select for the user, so don't try to display the roles there - just display the user id, name, whatever else is helpful and when the approver clicks on the user id they will get the approval details which will include the requested role.
Also, please note that if you would like to assign a role directly anywhere (bypass approvals) you can use the switch: {direct_reference=1}
-Geoff

How do I get rid of lip-sync issues with iTunes 10.2.2.12?

Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
        Card name: NVIDIA GeForce 6200
     Manufacturer: NVIDIA
        Chip type: GeForce 6200
         DAC type: Integrated RAMDAC
       Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
   Display Memory: 512.0 MB
     Current Mode: 1280 x 1024 (32 bit) (60Hz)
          Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
      Driver Name: nv4_disp.dll
   Driver Version: 6.14.0012.6099 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
      WHQL Logo'd: Yes
WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: nv4_mini.sys
    Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
        Vendor ID: 0x10DE
        Device ID: 0x0221
        SubSys ID: 0x02F3196E
      Revision ID: 0x00A1
      Revision ID: 0x00A1
      Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
            Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
            Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: P16X.sys
         Driver Version: 5.12.0001.0129 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 8/14/2003 16:58:12, 1296384 bytes
            Other Files:
        Driver Provider: Creative Technology Ltd.
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
              HW Memory: 0
       Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
               Registry: OK
      Sound Test Result: Not run
            Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
            Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
        Manufacturer ID: 65535
             Product ID: 65535
                   Type: WDM
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.7000 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 3/22/2005 11:08:40, 260224 bytes
            Other Files:
        Driver Provider: Analog Devices
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
              HW Memory: 0
       Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
               Registry: OK
      Sound Test Result: Not run
Sound Capture Devices
            Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
            Driver Name: P16X.sys
         Driver Version: 5.12.0001.0129 (English)
      Driver Attributes: Final Retail
          Date and Size: 8/14/2003 16:58:12, 1296384 bytes
              Cap Flags: 0x41
           Format Flags: 0xFFF
            Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
            Driver Name: hcw88aud.sys
         Driver Version: 2.125.28070.0000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/12/2010 09:47:58, 13440 bytes
              Cap Flags: 0x41
           Format Flags: 0xCC0
            Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.7000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/22/2005 11:08:40, 260224 bytes
              Cap Flags: 0x41
           Format Flags: 0xCCC
DirectMusic
        DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
     DLS Version: 1.00.0016.0002
    Acceleration: n/a
           Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                  Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                  SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                  Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                  Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
        Registry: OK
     Test Result: Not run

Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name.

Issue with Attribute - BUK

Similar Messages

Maybe you are looking for