Issue with Attribute change run

Hi All
today one of my team memeber has killed attrribute change run, after that when we tried to use option maintain master data, a message were coming attrtibute has cancelled, please re run, even we were not able to load same infobjects, getting message, master data is locked, when it tried to see data in p table then i was getting few entries having delate and insert image( example for infoobject 0customer for customer number c100 two entries one with d flga other one with in flag.)
First i went in t code se14, i put all tables name then cliecked on activate and adjust data.
Even though problem persist,
Also i was not getting any infobjects in lsit( from rsa1-> tools-> attr change run)
Then i created one dummy process chain with process type attr change run and included only inoobject with which i was facing data load issue.
Please advice on my step.
Thanks,
Prem

Hi,
Goto RSATTR Tcode -> Click on Tab Monitor and Start Terminated Change Run -> system will open a new screen -> here you can see the failed change run, please rerun this failed change run and then try to load data, after successful change run things will be normal.
SAP Clearly suggest NOT TO KILL OR CANCEL Change Run Job. If this don't solve you issue, you may need to look for some SAP Note.

Similar Messages

Issue with Attrbute Change Run in BI 7.0

Hi All,
I have loaded a few master data objects as well as some custom master data objects and have found that they do not always show up in the list when you go to apply the attribute change run to something you have just loaded.
For instance I have just loaded a custom object from a DSO and if I click on manage on the attribute the load is there but I am not seeing any data in the object, then if I go to apply the attribute change run in the tools menu. The infoobject does not show up in the list???
Has anyone else run into this issue. I have done a search but could not find anything that answered my question.
Thank you!
Caroline

Hi Caroline,
If the hierarchies and attributes of characteristics that belong to an InfoCube have been changed, you have to make structural changes to the aggregates to modify the data accordingly.
In this task, you can perform the attribute change run ad hoc.
http://help.sap.com/saphelp_nw70/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
After each full load of master data, if you want to run attribute change run for an object eventhough the object does not show up in the list. Go to se38 Execute the program RSDDS_AGGREGATES_MAINTAIN. In selection, Info object list - enter the infoobject name then execute it. Will give a pop-up message Hierarchy/attribute change successfully carried out.
Edited by: Priya.D on Mar 11, 2010 6:16 AM

Error in process chain with attribute change runs

We have one warning is coming in one process chain :A type "Attribute Change Run" process cannot precede process "Execute InfoPackage"
We checked the Process View , we found that there are number of attribute change run after each scheduling of Info package with different datasource but for same data target.
How to remove this warning .
Some onsite person has added this extra Attribute Change Run recently.

Hi Surendra,
If it is the same Info-object that is getting loaded through different Info-packages then have only 1 "Attribute Change Run" process at the end. You can ignore the warning.
Bye
Dinesh

Aggregates with Attribute Change Run and Master data

Hi !
I created Aggregate which includes Master Data such as Customer , Customer Number , Material , Material Number.....
It also contains navigational attribute and hierarchy...
Now we all know that if Master data and Hierarchy changes frequently(or some new values are added or new attributes are added etc.) we want to see the respective change in Aggregates too
So just Rolling up aggregate will not help.
We need to apply Attribute Change run for this purpose, to aggregates..
Now the question is HOW TO APPLY ATTRIBUTE CHANGE RUN to aggregates?
How to automate this process with Process chains..?
If i create Aggregate on Master Data CUSTOMER NO., DOES IT AUTOMATICALLY INCLUDE THAT AGGREGATE IN ATTRIBUTE CHANGE RUN FOR THAT CUSTOMER NO. PROCESS CHAINS ? Yes or No..........
(What i mean to say is if there is Attribute Change Run for Customer No. and if this is in Process chains specially created for Customer Number , than as aggregates are created on Customer No., does i t automatically applies and make changes to Aggregate too, or do we hvae to create special process chian for it ?)
Please reply asap ? its urgent

hi,
check these links for attribute change run
What's the attribute change run? and the common sequence of a process chain
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
regards
harikrishna N

Error with Attribute Change Run - Urjent

Hi All,
In our scenario we will load master data from APO&ECC to BW.When we are doing attribute change run we are geetting short dump and jobs are cancelling every time .
Please fidn the details below.
Short Dump : ORA-14400 with ABAP/4 DBIF_RSQL_SQL_ERROR..
When I have searched in the forum I got some information saying that we need to drop the index and recreate the index.But we have around 40 cubes.Then how I am going to deside on which I need to the relavent settings.
Please provide me the proper answer.We are facing this problem from past last two days.
Regards
Ramakanth.

Hi,
You can try going to the monitor for Attribute change run from RSA1 >> tools >> apply change run or from Transaction RSATTR which will schedule/display attribute change run. Here you can have an option called change run monitor (Monitor icon). this wil show the status of change run including which all info objects are affected, and if its hitting the aggregates of any cubes. There are scenarios where the attribute change run failed with message that it was hitting/affecting aggregates of some infocubes. In case we had to switch off aggregates and trigger the change run again and then swtich on the aggregates after the change run is over.
And sometimes ACR goes on running for a long time in such case we need to check which Aggregate the ACR is currently changing and need to deactivate that aggregate.
But before deactivating an aggregate you need to check the data present in that and the usage of the aggregate.
Please use the table RSDDCHNGPROT and find out the infocube affected by this change run and de-activate "ALL" the aggregates
of the infocube listed under CNSID=0. Then start the change-run.
You can rebuild/refill the aggregates once the change-run is finished.This is necessary because there are inconsistencies in the aggregates
Most of the times we have problem with the Attribute Change Run(ACR) running because ACR and the Roll Up's for Aggregates cannot run in parallel.
Also you can try Tcode CHANGERUNMONI/program RSDDS_CHANGERUN_MONITOR to view this data.
176606 - Apply Hierarchy/Attribute change ... long runtime
175309 - Hierarchy/attribute - change run improved
oss note 322644
Hope this helps.
Thanks,
JituK

How does attribute change run works for Aggregates and Master data?

Hi
Can anybody xplain how does the attribute change run works for Master data ?
For e.g.
There is 0spelling and it has master data
On Day 1 there are 10 records
day 2 it has 12 records
so with attribute change run this 2 new records will get added....
The values for this 12 records will added seperately in Data load
Is this how it workss
So how about Aggregates which has Master data.????

for e.g.
u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
so do ur aggregates on day1 with same values
now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
with data load u will load the data with version M of modified and is not available for reporting
If u do attribute change run then this modified version is activated to A i.e. active version .
It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
if u roll up aggregate before attribute change run , new data is not avaialable for reporting
if u roll up aggregate after attribute change run, then data is available for reporting
if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
this is how it works

Problem with Customer master Attribute change run

Hello Experts
Master data load process chain for 0Customer failed in system at attribute change run step.
Because of that failed instance when ever we try to reload data get error message
"Attributes of characteristic 0CUSTOMER are locked by terminated change run 468502640"
"Lock NOT set for: Loading master data attributes"
It seems that last attribute change run step had locked master data object and lock is not yet released.
Kindly advice resoluiton to this problem.
Thanks in advance
Regards
Sudeep

Failed due to lock issue. check in SM12 you can find lock with respect to your change run 468502640.
Looks like master data step is running.
Wait till the masterdata for attributes of 0CUSTOMER completes and them repeat the attribute change run step.
To repat the attribute change run
Rsa1 --> Menu Tools -->Apply Hierarchy/change run or use transaction RSATTR
Click on monitor and Start Terminated Changes Runs(monitoring of Change runs)
Here you can check the failed Attribute change run object in red status.
after completion fo the master data and check the locks and click on execute button over there.

Attribute Change Run aborted with an error :Not all data indexed for index

Hi,
I have an issue where the master data Attribute Change Run aborted with an error pointing to the BWA:
Attribute Change Run aborted with an error :Not all data indexed for index
we tried to load only 0 data into it,the error still occured.

Detail message is following:
not all data was indexed for index 'GBP_BIC:XYCH_098('0' for '114')
creation of The BIA INDEX for infocube 'YBC_SD015' terminated while filling

Issue: attributes change run triggers the rebuilt of 0IC_C03 aggregates

Hello Guru,
I am facing to a problem that I don't understand.
Here is below the detail of the messages of a '3-infoobjects attributes change run' step of a Master Data process chain.
22:06:14     Job started
22:06:14     Step 001 started (program RSPROCESS, variant &0000000231235, user ID RFC_BW)
22:06:16     Starting process type ATTRIBCHAN with 3 objects...
22:06:16     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K with ID 22061600
22:06:16     Editing of aggregate 100139; background job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K; start time 22:06:16/07.07.2010
22:06:18     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K with ID 22061601
22:06:18     Editing of aggregate 100143; background job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K; start time 22:06:18/07.07.2010
23:02:29     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K with ID 23022900
23:02:29     Editing of aggregate 100140; background job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K; start time 23:02:29/07.07.2010
23:52:38     Starting process type MDHIERACT with 2 objects...
23:52:39     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIACTI_D8FCR9Y1NWOP2T4F76FYE0HDG with ID 23523900
23:52:39     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIACTI_D8FCR9Y1NWOP2T4F76FYE0HDG with ID 23523901
23:53:10     Aggregate 100139: Repair indexes
23:57:14     Aggregate 100140: Repair indexes
00:17:23     Aggregate 100143: Repair indexes
00:50:09     3 aggregates are condensed
00:50:09     Starting process type CONDAGGR with 3 objects...
00:50:10     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICOND_D8FD3GTNF0KF92R34346SW6PG with ID 00501000
00:50:10     Editing of aggregate 100143; background job BICOND_D8FD3GTNF0KF92R34346SW6PG; start time 00:50:10/08.07.2010
00:50:10     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICOND_D8FD3GTNF0KF92R34346SW6PG with ID 00501001
00:50:10     Editing of aggregate 100140; background job BICOND_D8FD3GTNF0KF92R34346SW6PG; start time 00:50:10/08.07.2010
00:50:16     Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICOND_D8FD3GTNF0KF92R34346SW6PG with ID 00501600
00:50:16     Editing of aggregate 100139; background job BICOND_D8FD3GTNF0KF92R34346SW6PG; start time 00:50:16/08.07.2010
00:50:22     Hierarchy/attribute change successfully carried out
00:50:23     Event RSPROCESS with parameter D59BE8XWZMHY0IFP2VLEFP671 successfully triggered
00:50:23     Job finished
As you can observe, the step takes almost 3 hours !!!!!!! After anlyses BICHNG_* concerns
22:06:16 Job started
22:06:16 Step 001 started (program RSBATCH_EXECUTE_PROZESS, variant &0000000891873, user ID RFC_BW)
22:06:18 Aggregate 100139( 0IC_C03) is being adapted / rebuilt
22:06:18 Statistic UID of the aggregate process: 'D8FC4Q9KSAMRDWQ1RDPPKMF3O' (RSDDSTATAGGR)
22:06:27 Aggregate 100139: Read (1) from table /BI0/E0ICC03_ (max 500000 records)22:06:27 SQL: 07.07.2010 22:06:27 RFC_BW
I don't understand what is the link between the '3-infoobjects attributes change run' (BBATCH, 0MAT_SALES, 0MAT_PLANT) and the rebuilt of 3 0IC_C03 (Material Stocks/Movements) aggregates (why does the 'attribute chan run' trigger the rebuit of aggregates???).
The rebuilt of the 3 aggregates takes 1 416, 3 366, 3 009 secondes...
Does anyone understand my problematic? If not I can give you more details.
Thanks in advance for your help.
Samuel

1/ Exactly Fred
Here is the definitions of the aggregate:
100139:
0PLANT
0STOR_LOC
0MAT_PLANT__0VAL_CLASS
0STOCKCAT
0STOCKTYPE
BMODIFIC
BMVTSTOCK
0MATL_TYPE
0CALxxx
2/ For my information in the aggregate 100140 , does the presence of BBATCH (one of the 3 IO) trigger the rebuilt or is it only 0MAT_PLANT__0VAL_CLASS ?
100140:
0PLANT
0STOR_LOC
0MATERIAL
0MAT_PLANT__0VAL_CLASS
BBATCH
0STOCKCAT
0STOCKTYPE
BMODIFIC
BMVTSTOCK
0MATL_TYPE
0CALxxx
3/ In the same process chain, I have another Attributes Change Run: 0MATERIAL. Several active aggregates using 0MATERIAL__0MATL_TYPE are built on a CO-PA cube.
Why did the '0MATERIAL Attributes Change Run' rebuild no aggregate? (see below)
22:06:04     Job started
22:06:04     Step 001 started (program RSPROCESS, variant &0000000231238, user ID RFC_BW)
22:06:06     Activation of master data for 0MATERIAL
22:06:07     154 Data records deleted
22:06:11     154 Data records deleted
22:06:12     154 Data records updated
22:06:13     154 Data records updated
22:06:13     0 aggregates are condensed
22:06:14     Hierarchy/attribute change successfully carried out
22:06:14     Event RSPROCESS with parameter D59BEEE069HKRCRU0ZPYFUPB1 successfully triggered
22:06:14     Job finished
Samuel

Attribute Change Run in Process Chain failed with SQL 942 error

Hi,
Attribute change run in th eprocess chain failed with the message " SQL Error 942" and ran succesfully after repeating the step.Searched in Forums for similar error but the solutions were not apt.
Any pointers would be of great help!!
Thanks in advance,
Bhagyarekha.

Hi Bhagyarekha,
The reason behind that error could be:
An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
Check this SAP Note:
Note 684405 - Replacing the compounding and deleting navigation attr.
Hope it helps.
Veerendra.

Attribute Change run issue

Hi All,
I have a Info Object 0MEASERE, we have maintained master data for that and ran attribute change run... but unfortunately it was not activated, so we ran change run again now we get the message saying that it is locked in the terminated job.
But when i check st12 there are no locks against the user.
Can someone please tell me what should i do to activate this?.
Regards
BN

Hi,
Chk this thread. It should help ur issue.
Hierarchy is locked by a terminated change run
Hope it helps. Assign points if useful.
Cheers.

Attribute change run process type failed with short dump

Hi all,
In the process chain Attribute change run process type failed with short dump. I checked the locks in SM12 but there are no locks associated. I checked in the attribute change run screen through RSA1 -> infoobject list but there are no infoobjects there. I think the ACR was completed successfully, still the process type in the PC was in red colour. What to do and let me know what happened here.
Thanks,
Jack

1. This kind of scenario is extremely rare but it happens sometimes. It might be the case that 2 attribute change runs are running at the same time.
2. Same IO is being used in Differnet PC and getting activated.
I think if this frequently occurs you need to check at the time of locking all running jobs and see whether anywhere else or simultaneously 2 ACR are running.
Please do close the thread if that answers your questions. Please help us keep the forums clean and open useful information only.
For more information search on help.sap.com and you will get lots of material.
Regards.
Den

Attribute Change run taking too long time to complete.

Hi all,
Attribute change run has been taking too long time to complete.It has to realign 50 odd aggreagates, some by delta , some by reconstruction. But inspite of all the aggregates it used to finish in quick time earlier. But since last 4-5 days it is taking indefinite time to finish.
Can anyone please suggest what all reasons may be causing this? and what possibly can be the solution to the problem? It is becoming a big issue. So kindly help with ur advises.
Promise to reward your answer liberally.
Regards,
Pradyut.

Hi,
Check with your functional owners in R/3 if there are mass changes/realignments or classification changes are going on regarding master data. e.g. reasigning materials to other material groups. This causes a major realignment in BW for all the aggregates. Otherwise check for parameterchanges / patches or missing db stats with your sap basis team.
Kind regards, Patrick Rieken.

Attribute change run Failing in Process Chain

Hi guys,
Every day my process chains is failing due to Attribute change run and I am maually running attribute change run.
And one more thing when the attr. change run is triggered automatically,then it is generating 2 change counters in RSATTR tcode instead of 1.
One is successfully completes and one is still in schedule.After 2days days it is showing like completed change count id.
Please help me.
Regards,
Tiragati.

Hi,
As you said Attribute change run step is failing every day.
can you post the error message. is it failing because of Lock issue or some other issue.
Mostly attribute change runs fails with lock issues. if its the same problem in your case. make sure that no master data objects runs at the time attribute change run runs.
Try to put some delay in the process of the Attribute change run so that it will not get failed.
Check if its the same ACR scheduled or diff objects?
Regards
KP

Attribute change Run and Infocube Problem

Hi SAP BW Experts ,
I am getting the following problem
2 days back our production system was down when Attribute change run is running in a process chain . After the system is up I triggered the Attribute change run manually for that specific master data Object. But the jobs was cancled automatically. When I checked the Job log I found the following messages
InfoCube XXX is locked by a terminated change Run
System error: RSDU_TABLE_COPY_INI/DDIF_TABL_ACTIVATE /BIC/E200073 /BIC/E100073 0
Message no. DBMAN100
When I verified manage screen in the Infocube XXX , one request is not rolled up . when I tried to rollup that particular request manually again I am getting the same message InfoCube XXX is locked by a terminated change Run
When I tried to create Indexes on that Infocunbe XXX , Again I am getting the same message InfoCube XXX is locked by a terminated change Run
When I tried to load data in to that Infocube I am getting the same message InfoCube XXX is locked by a terminated change Run
The Steps Taken By Me:
1. In SM12 , there are no lock entries for the Infocube XXX
2. According to A.H.P reply I verified the Support package . We are having Import Support package 18 for 3.10( BW 3.10 patch 18 or SAPKW31018 )
so I think there is no problem from patch side.
So please let me know by doing which task , I can eliminate the error message InfoCube XXX is locked by a terminated change Run

I got this reference from one of other site. Hope this solves issues of most of our ques on this topic.
We faced this problem and reported to OSS. They solved our problem.Here is
the answer from OSS
I connected to your BWQ system. I checked the table RSDDAGGRMODSTATEand
found an entrie for a change run "not yet" finished.
CNSID CLOSEDFL TIMESTMP_START TIMESTMP_END TSTPNM
207,851,300 20,030,910,141,500 0 SIDTLHG
As you can see, the field CLOSEDFL is blank (should be 'X' for an ended
change run) and the field TIMESTMP_END is also zero.
You can also check with the function module RSDDS_CHANGERUN_MONITOR as
in note 388069 that both objects you reported are the ones involved
with thi change run error (Infocube ZINV and Infoobject ZELEM_PEP):
E_CR_STATE C
E_T_CHANM 1 Entry (IOBJNM = ZELEM_PEP)
E_T_HIEID 0 Entries
E_T_AGGRSTATE 1 Entry (AGGRID = 3QR79ZYB6VGSDS3C42HPXMA8S
ICUBE = ZINV)
E_T_MSG 1 Entry (IOBJNM = ZELEM_PEP)
You have two choices to solve this problem. You cn either:
1.- Restart the change run and let it finish with ok.
The change run usually fails due to database errors, tablespace
problems, and when some user manually cancel it (NEVER should be
done!!)
2.- Change manually the entry from table RSDDAGGRMODSTATE that isdescribed
above. Set the field CLOSEDFL with a 'X' and also fill the field
TIMESTMP_END with a value with the following format
yy,yym,mdd,hhm,mss. Use, for example, '20,030,910,181,500'
IMPORTANT!!!
After this change on table RSDDAGGRMODSTATE, you have todeactivate
all aggregates, activate again and refill them!!
Hope this solves your error. If the issue is solved, please close this
message with the [confirm] button.
Best regards,
David =C1lvarez
SAP Active Global Support
The answer refers to our problem.We chosed option 2. Here is the AbAPcode:
REPORT ZLOCKED .
tables: RSDDAGGRMODSTATE.
select * from RSDDAGGRMODSTATE where CLOSEDFL = ' '.
RSDDAGGRMODSTATE-CLOSEDFL = 'X'.
RSDDAGGRMODSTATE-TIMESTMP_END = 20020912195015.
MODIFY RSDDAGGRMODSTATE.
ENDSELECT.

Issue with Attribute change run

Similar Messages

Maybe you are looking for