Issue with attunity connectors for SSIS 2012

hi ,
i have installed the attunity connectors for teradata .
the connector is able to transfer data from teradata to sql server pretty fast but there are some issues which i am facing .
any help is appreciated.
steps i am using :
1. i am pulling data from teradata to sql server using a sql command .
 the issue .
the query which i type in teradata source should be in a line else it will throw a error for new line character.
2nd issue :
the teradata source pulls the data but the package(when executing from Data Tools visual studio) doesnot completes successfully . it says that package is successfully executed please click here to switch to design mode .
so if there is any step after this step then it will not execute and the package gets stuck at this point .

So as ypou can see the third image contains the no of rows in the table in teradata is264558. bu the no of rows transferred from teradata to sql server is 254696. and this keeps on running even when u can see that the first snapshot says that the package
has finished the execution . but data is still pending .
seems like a wierd issue . Any help/guidance is appreciated.
Thanks

Similar Messages

  • Issue with Temp tables in SSIS 2012 with RetainSameConnection=true

    Hello,
    We have few packages written in 2008 and are being upgraded to 2012. Our package mostly uses temp tables during the process.  During initial migration, we faced issue with handling temp table in the OLE Db destination provider and found a solution for
    the same under 
    usage of Temp tables in SSIS 2012
    Most of our packages execute fine now. 
    we came across a different issue recently. For one of our package, which merges 3 feeds into a temp table and then executes a stored procedure for processing, the package fails intermittently.
    Below are properties of SSIS and its components, which you might be interested
    * Retainsameconnection for the OLE Db connection manager set to True
    * properties of OLEDB Destination 
    AccessMode : SQL Command
    CommandTimeOut : 0
    SQLCommand : Select * from #tmp
    * using SSIS 2012 and SQL OLEDB Native Provider 11 (Provider=SQLNCLI11.1)
    * one of the feed is 10MB
    During investigation using profiler, found that though I use RetainSameConnection, I often  could see that more than one SPId is used during the scope of SSIS execution and when ever this happens, package fails with below error message 
    An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E14 Description: "Statement(s) could not be prepared.".
    An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E14 Description: "Invalid object name '#tmp'."
    Now, Why SSIS uses a different SPId during its execution when RetainSameconnection is set to True (note : I have only one OLEDB connection in that package)? 
    To simulate the issue, Instead of 10MB file, I used a 500KB file and execute the package twice and all went fine.
    Is it because of 10 MB file taking long time to process causing the time out of that OLEDB destionation forcing the SSIS to go for another connection? but remember, CommandTimeout is set to infinite(0) for that OLEDB destination. 
    Much appreciated your response. 

    Hey,
    I understand you used Retainsameconnection property true for all the OLEDB connections you used in the package if not make sure its for all the connection including file connection as well.
    Additionally, you can try to set Delayvalidation property to true for all the dataflows and control flows in the connection and try running the package for 10MB file.
    I hope this will fix the intermittent failure issue you are facing with SSIS.
    (Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker)
    Thanks,
    Atul Gaikwad.

  • Attunity connectors for Oracle in Import Export Wizard in SQL Server 2008 R2

    Is there a way we can see the Attunity connectors drivers in the Import/Export Wizard (64 bit) for SQL Server 2008 R2?
    Although I made it work for SSIS, I would need these drivers in the Import/Export wizard so as to automate it for numerous number of tables which I want to migrate.
    Can the Attunity connectors for Oracle be used in the Import/Export wizard? If so please let me know.
    Regards,
    Ashutosh.
    Ashutosh.

    I have 100 tables to migrate. Creating a data flow for each table is tedious and that's why I was looking out for a way to do it through import export wizard so that I don't have to create a separate data source and destination for each table in the Data
    flow Task.
    Is there a way to loop through all tables and transfer data in SSIS without having multiple sources and destinations created for each table? This also involves a bit of transformation as well.
    Regards,
    Ashutosh.

  • How to use the iTrip with dock connector for iPod 5th gen. video

    I bought the new iTrip with dock connector for my iPod video 5th gen. and I followed exactly the instructions but I cannot hear any music on the radio. Has anyone experienced the same problem or the contrary has anyone managed to make it work. Thanks for your help.
    Inaha
    iMac 4   Mac OS X (10.3.9)   iPod 5th gen video

    I got the answer from someone else and it works.

  • I have an issue with disappearing option for 1920x1080 in Preferences / Displays.

    Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
    I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080.  This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
    I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
    I have tried:
    Power down Monitor & restart
    Shutdown & restart
    Shutdown & restart in Safe Boot Mode (options same in Prefs)
    Power down Monitor & restart in Safe Boot Mode
    Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
    Udated Pram
    I am now at a loss, I guess I could try a recovery, and download/install  Mavericks again, but do not wish to do this if I can help it.
    I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
    Anyone out there have any ideas, please.

    Back up all data. Quit System Preferences if it's running.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    ~/Library/Preferences/ByHost
    In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
    Test.

  • Issue with Visibility Settings for Backgrounds and Layers

    I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
    When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
    Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
    I was wondering if anyone else has run into this and has a solution, or has any recommendations.
    Thanks in advance.

    Hi setrev2012,
    How are you adding the backgroud?
    The only way I can think to accomplish this is via a watermark.
    The basics...
    Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
    Select a jpg or PDF of your background and adjust scaling options as desired.
    Then click the Appearance Options.. and uncheck the Show When Printing option.
    In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
    If you want a solid color background, just create a flat image of the background color for use as the watermark.
    If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
    Regards,
    Rave

  • Hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

    hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

    http://support.apple.com/kb/TS3694#error-1
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

  • Issues with windows 7 after Labview 2012 installation

    Hi
    I am having some issues after installing Labview 2012 on machines running Windows 7. Firstly, after installing a program on a user's machine, the machine sometimes takes 20 minutes to boot up before the user can log on. The 'Please Wait' message appears during this time. This is also the case on the development machine.
    Secondly, on the development machine, I am having an issue when trying to run compiled programs created in Labview. When installing, everything works fine but when I go to open the program, it appears on the task bar for a brief period before closing. It does not appear in the task manager either. I have tried this on 2 other machines with windows 7 and Labview installed and still get the same issue.
    Any help on these matters would be much appreciated. Thank you

    Hi
    Firstly, looking at the issue with the slow Windows 7 boot up time, as Norbert_B suggested the Windows Event Log is a good starting point to find the root of the problem. The following link describes how to launch “Event Viewer” and some common problems:
    http://itexpertvoice.com/home/what%E2%80%99s-taking-so-long-how-to-fight-slow-startup-times-in-windo...
    Aside from that, if your computer is part of a domain, the problem may be connected with certain Windows Services that start automatically on boot up. I recommend trying the following steps:
    Open up “Control Panel” go to “System and Security” then “Administrative Tools” from here launch “Services”.
    Sort the list by name and scroll down to “Network Store Interface Service” right click and select “Properties”. Under the startup type dropdown select “Automatic (Delayed Start)”.
    Next scroll down to the “WebClient” service again under “Properties” this time select “Disabled” under the startup type.
    As for the problem with running LabVIEW executables, I have a few questions:
    Do you get any error codes when it closes automatically?
     Does this occur for multiple executables or just one in particular?
     Does the code run without a problem within LabVIEW?
     Have you tried to update LabVIEW?
    What hardware are you running?
    Without this information I can only think it may be caused by the Windows Data Execution Prevention (DEP) security feature. So you can try the following steps:
    Right click on “Computer” and select “Properties”.
    Click on “Advanced System Settings” and select the “Advanced tab, then under the performance section click “Settings”.
    Click the “Data Execution Prevention” tab.
    Make sure it is activated for essential Windows programs and services only, or you have an exception for your EXE.
    You may also find the following link helpful on debugging applications:
    http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/debug_apps_dlls/
    Let me know if these solve the problems.
    Andrew.N
    Applications Engineer
    National Instruments

  • Issue with Dataflow Task in SSIS Package

    Hello Everyone,
    I have recently created an SSIS package to Load data from Flat file to SQL Server Table, it was working fine. Now I have bought a new laptop and copied the projects into this new system and changed all the connection managers(Flat files) accordingly. 
    Problem is, when I previously ran the package(With File1) in old laptop and check the distinct count on a table it was perfect, but when I ran the same package with same File on New Laptop, the Distinct count gives me an issue with particular record.
    Eg: Distinct Count with old laptop Run , 10,20,100
          Distinct Count with old New Run , 10,20,100  , 100
    There is a Space being generated for a particular record, when I run the package on new laptop with same File as old one.
    Any suggestions on this, I could not exactly figured out the Issue.
    Please Help.
    Thanks
    Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

    You need to tell the responders here how exactly to reproduce your issue and provide the file.
    I do not know how the "distinct count" works.
    Seems to me it appears to be a database issue not SSIS.
    Arthur
    MyBlog
    Twitter
    When I perform the above query on old laptop, this gives me a result set of
    10
    20
    100
    When I perform the Same query on New laptop, this gives me a result set of
    10
    20
    100
    '100  ' (No Quotes please see the spaces generated)
    Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.
    Can you give us an idea of tasks you're having after the file source?
    Particulary see steps where you are doing some data manipulations.
    Please Mark This As Answer if it solved your issue
    Please Mark This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page
    I am using simple Flatfile source and oledb destination in here. this is causing issue, all the other tasks after this are loading perfectly except this.
    Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

  • Driver issues with HP Z440 and SCCM 2012 R2?

    Greetings, we received our first charges of Z440 workstations last week. We immediately downloaded the HP Z440 driverpack from http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html and imported those into our System Center Configuration Manager 2012 R2. Of course we did use the Win 8.1 drivers to inject into our boot image and wie normally imported the Windows 7 drivers for the Windows 7 deployment.Well, unfortunately SCCM WinPE5 does not show any drives installed, even with the correct drivers installed. We even tried to import  the WinPE 5 driver pack and the drivers from SoftPaq download manager, but none of those seemed to work. Is there any known issues with Z440s drivers and SCCM? Please help me out on this, it's pretty urgent. Thank you & kind regards

    The problem cannot be replicated. My Z440 has an 1TB WD SATA drive attached to port 0 of sSATA 6 Gb/s. Download and install the ´Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update´:   https://www.microsoft.com/en-US/download/details.aspx?id=39982 Download and extract the ´Intel Rapid Storage Technology Enterprise Utility and Driver for Microsoft Windows (64-bit Editions)´, 4.1.0.1046 B(12 Nov 2014), sp69762.exe:http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6978829&swItemId=wk_139802_1&swEnvOid=4059 Copy the IRST driver “64bit_RSTe_4.1.0.1046_F6_Drivers” abd sub folders into “C:\z440_x64\64bit_RSTe_4.1.0.1046_F6_Drivers” Open the ´Deployment and Imaging Tools Environment´ command window as administrator and create bootable USB media:copype amd64 c:\winpe_x64 Dism /Mount-image /ImageFile:c:\winpe_x64\media\sources\boot.wim /index:1 /MountDir:c:\winpe_x64\mountDism /Add-Driver /image:C:\winpe_x64\mount /driver:C:\z440_x64 /recurseDism /Get-Drivers /image:C:\winpe_x64\mountdism /unmount-wim /Mountdir:c:\winpe_x64\mount /commitMakeWinPEMedia /UFD c:\winpe_x64 d: Boot Z440 to F10 Setup.Set Factory Defaults and exit.Boot to WinPE media created above.I also tested the wim file as the boot image in SCCM 2012. The hard drive is detected correctly. 

  • Issues with Creative Cloud for teams deployment workflow

    The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
    First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
    [Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
    Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
    Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    It can be installed from command line by:
    Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
    Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
    Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

    Hi Boncker,
    I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
    Please do let us know if that worked for you or not .
    Cheers,
    Kartikay Sharma

  • Issue with Apps adapter for Create_Cust_Account API

    Hi ,
    I need to invoke this package from apps adapter in BPEL(10.1.3.5).
    Create Customer: HZ_CUST_ACCOUNT_V2PUB. create_cust_account. This is a Over loaded procedure. Look for the Procedure with these Parameters.
    PROCEDURE create_cust_account (
    p_init_msg_list IN VARCHAR2:= FND_API.G_FALSE,
    p_cust_account_rec IN CUST_ACCOUNT_REC_TYPE,
    p_organization_rec IN HZ_PARTY_V2PUB.ORGANIZATION_REC_TY
    PE,
    p_customer_profile_rec IN HZ_CUSTOMER_PROFILE_V2PUB.CUSTOMER
    PROFILEREC_TYPE,
    p_create_profile_amt IN VARCHAR2:= FND_API.G_TRUE,
    x_cust_account_id OUT NUMBER,
    x_account_number OUT VARCHAR2,
    x_party_id OUT NUMBER,
    x_party_number OUT VARCHAR2,
    x_profile_id OUT NUMBER,
    x_return_status OUT VARCHAR2,
    x_msg_count OUT NUMBER,
    x_msg_data OUT VARCHAR2
    But I’m getting the following error,
    An error occurred while running Jpublisher.missing method
    · I’ve tried with Database adapter. But in the runtime I’m not able to pass oracle apps initialization parameter in spite of using transaction and idempotent property in partnerlink.
    · Then I’ve tried to invoke fnd_global.apps_initialize first then call the package from database adapter, but it fails again, apparently its not able to execute both DBadapter in same database session although they are in same BPEL transaction.
    When I’m passing the initialization parameters in adapter created wrapper procedure then its working fine and customer got created.
    Please let me know where I’m going wrong or issue with apps adapter.
    It’s urgent …
    Thanks in Advance,
    Shreekanta

    Thanks for the reply.
    I'm able to execute the BPEL flows using DB adapter in same session and customer got created.
    But I'm wondering why I cant invoke the API using Apps adapter though its standard one.
    wsdl file is not getting generated as the adapter wizard not get completed.
    Do u have any idea why its giving ' error occurred while running Jpublisher.missing method' error?should I conclude that apps adapter does not support overloaded procedure.

  • Issue with provided message for WSDL of SAP PI sender interface

    Hi,
    as I am not familar with SOAP interfaces and use of WSDL by partners with WSDL generated in SAP PI there are some issues that I have with a scenario:
    1. Import of external xsd for message is done
    2. Enterprise Repository and Integration Directory objects are completely created and activated
    3. WSDL was generated from ID Sender agreement (This is PI 7.1)
    4. Partner got the WSDL
    The partner provided now some test messages by mail that I would like to test in the mapping as the message is really complex.
    But the result is strange...
    1. The header of the partner message is this:
    <XJustiz_Daten xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
      <Grunddaten xmlns="http://www.xjustiz.de">
    (Some german words are in that example. But this doesn t matter!)
    This is different to the xml that PI generates in mapping:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:XJustiz_Daten xmlns:ns0="http://www.xjustiz.de">
       <ns0:Grunddaten>
          <ns0:Grunddaten XJustizVersion="">
    Partner defines xsi:   instead of ns0   and PI fails using this message!
    So I had to change the message header and add ns0: to all element tags and node tags of the message.
    (See for example with first node "Grunddaten").
    2. There are some mandatory nodes and elements.
    An example:
    - Rechtsform is mandatory node (1..1) with element content (mandatory 1..1)
    So it will appear in the payload like this:
                        <ns0:Rechtsform>
                                <ns0:content xmlns=""/>
                         </ns0:Rechtsform>
    But the partner provides this:
    <Rechtsform xsi:nil="true" />
    which is the next issue as PI doesn t understand as xsi is not mapped to a namespace. !
    It would be easy to use an "exist" function to solve the issue with the not provided element but this will not help
    when the node is provided with additinal information xsi:....
    Can you give any help/answer why PI is not able to handle such things.
    Thank you!
    Best regards
    Dirk

    Hello Meinhard,
    If you are the Service Owner, the sender system must use your wsdl message (WebService Definition).
    If there're other problems or the sender system can't use your message structure, in agreement with them you need to develope a different mapping.

  • Issue with Multiple LTS for a fact table and filters

    Hello,
    I am facing an issue with obiee 10g.
    In my model, I have a huge FACT table F1 (partitioned and indexed). The average response time for the queries, which targeted it, was ~30-60 seconds, which was not really convincing our end user.
    So, we decided to create a materialized view, which removes some dimensions that are not used by default, but might be used if the end user adds some filters. I added the Materialized view in the Physical Layer and in the corresponding Logical Table Source.
    I then tried to see if it works, but I was a bit surprised by the result. Indeed,
    -> If the report does not reference a truncated dimension, it targets the materialized view. -> Perfect
    -> If the report does reference a truncated dimension in the columns, it targets the Fact Table. -> Perfect
    -> If the report does reference a truncated dimension in the Filters, it targets the materialized view. For this reason, the filter is never resolved and no join on the dimension table is applied, whereas it exists in logical SQL generated. -> Ko.
    A suggestion could be to add the filters into the columns, but I am not satisfied by this response because it will never use the materialized view in that case.
    An other suggestion could be to use query rewrite, but I 'd like to have the full control on the generation of the queries.
    Does someone know if the filters are not evaluated to determine which LTS to use? How can I force this evaluation?
    Regards,

    Hi,
    If I understand your description correctly, then your materialized view skips some dimensions (infrequent ones). However, when you reference these skipped dimensions in filters, the queries are hitting the materialized view and failing as these values do not exist. In this case, you could resolve it as follows
    1. Create dimensional hierarchies for all dimensions.
    2. In the fact table's logical sources set the content tabs properly. (Yes, I think this is it).
    When you skipped some dimensions, the grain of the new fact source (the materialized view in this case) is changed. For example:
    Say a fact is available with the keys for Product, Customer, Promotion dimensions. The grain for this is Product * Customer * Promotion
    Say another fact is available with the keys for Product, Customer. The grain for this is Product * Customer (In fact, I would say it is Product * Customer * Promotion Total).
    So in the second case, the grain of the table is changed. So setting appropriate content levels for these sources would automatically switch the sources.
    So, I request you to try these settings and let me know if it works.
    Thank you,
    Dhar

  • Issue with Work Items for a User

    HI All,
    I have an issue with workflow.
    One of my user stopped receiving work items in his inbox. I checked table SWWUSERWI and found 0 entries for the user. So i guess there is no problem with the display setting in SBWP.
    What could be the probable reason and where can i find if those workitems that are generated for him that he has not received.
    Regards,
    Rohit

    There can be many many reasons. You need to understand the workflow and work with an example (an item the user says they should have received). Then try to follow the agent determination logic based on the data contained in that example and verify that everything matches up.

Maybe you are looking for