Issue with Audio Playback and Uninterrupted Playback in MPE (Hardware Mode)

I'm currently using Adobe Premiere Pro CS6 with the latest update (6.0.1).
I'm encountering a very serious problem where the audio from my video clips mute sudddenly when I'm editing and playing back. This happens when other music or audio in the audio lanes (tracks) below that particular 'video clip audio' plays just fine. It literally mutes without any parameter change. This only happens to some of the clips while some plays back normally. I have to reopen my project to fix this and after 30 or 40 minutes of editing it happens again.
And the Source monitor blacks out when it do edits while I'm playing back video. (It's really disappinting when the most anticipated feature in Premiere CS6 fails to work in my computer) I'm editing in the MPE Hardware Mode and if I switch back to MPE Software mode this problem goes away.
My Camera is a Canon XF300 and I'm using the 50 Mb/s MXF 422 format. I'm pretty sure there's nothing wrong with the camera because the clips work just fine in CS5.5
My System Specs are;
Intel Core i7-2600 3.4GHz
16GB RAM
nVidia GeForce GTX 570 2GB (eVGA)
Windows 7 Ultimate
Blackmagic Studio Card (Onboard but Disabled)
Alesis Firewire Audio io26
4x 1TB Segate Hard-Drives
Help is really appreciated.
Cheers Mates!

How do I do that? And just the project file would be enough?
And I found another person with the same "Audio" problem as mine but his workaround isn't working for me.
http://forums.adobe.com/message/4489844#4489844
I guess you can get a better picture about the problem from that post.
Thanks Harm for your helpfulness.

Similar Messages

Issues with video playback, messed up shuffle mode with playlist sharing

I have a Mac (10.4.7) and a PC (XP SP2)... both are running iTunes 7 downloaded on September 12. All of my media is on my PC, and I do playlist sharing with my PowerBook across mu home network. A few issues with iTunes 7 that didn't exist for me in iTunes 6.0.5:
- Video playback is like multicolored TV snow. This happens on my PC as well as when the video is shared to my Mac.
- When sharing the music to my Mac, and I'm listening in shuffle mode, many times the same song will play twice in a row.
- I've only had this happen once so far (in the last 24 hours), but again I was listening to music shared to my Mac. One song played, then started to play again for the second time in a row. The song played for about 15 seconds, then jumped into another song. After that song was over, it jumped back and played the last 15 seconds of the previous song, all while having a completely different song highlighted in iTunes with the track position set to 0:00. It was very, very odd.
Frankenstien PC/PowerBook G4 Mac OS X (10.4.7) Windows XP Pro SP2

The first issue is resolved by http://discussions.apple.com/thread.jspa?threadID=639597&tstart=0
Any other ideas?

Audio Playback issues with quicktime 7 and iTunes - distorted sound

I was informed by my Soundcard manufacturer that Quicktime7 now requires a "real" WDM driver.
Many soundcards seems to have a "fake" WDM driver and this leads to chopped up sound that is completely distorted / garbled and impossible to listen to.
The fix is to downgrade to an older version of quicktime and iTunes.
I'm posting this because it was driving me crazy that there is no information on this in the support pages from Apple even if there are plenty of reported issues with audio playback. The system requirements from Apple does not mention the WDM driver either. I am not sure if this "true" WDM driver has to be "windows signed" and all unsigned drivers are "fake".
I'm sure the changed requirements has changed because of the need to address more audio channels but it would be great if the "safe mode" would accept "fake" WDM drivers.
I have also requested a driver revision from my soundcard manufacturer. We'll see...
Regards
Lars T
Dell P-390 Windows XP Pro core2duo, 2gb ram

By way of experiment, try updating your QuickTime Player to the most recent version.
Does that help with the iTunes problem?

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

Lindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

Experiencing issues with audio scrubbing in Premiere cc 2014

Since upgrading I've been having issues with audio scrubbing in Premiere CC 2014.
Some of the time it won't scrub at all (silence) when I know that scrubbing option is turned on. Other times it will scrub the wrong section of the timeline, I'll hear dialogue from a different point in a clip.
Much of the time I experience this I'm working with multicam clips in sequences.
Working on iMac 2013, 32GB RAM, NVIDIA 780
thank you.

Hi IP,
Intensity pro wrote:
...Adobe are you listening?
Yes, but it's Saturday. And I'm on vacation. You know??
Sorry that we do not have 24-7 support. The best time to catch us is 7AM-7PM PST, Monday to Friday.
Intensity pro wrote:
Currently using / testing a 30 day trial of CC 2014 (CS5 user for years with no issues) and all was fine yesterday when editing. Turned on today and had no way to scrub audio. Also had no Intensity Pro external monitor which worked fine the day before. Restarted PC and still nothing so starting poking around with the playback settings in preferences by choosing Adobe Desktop audio in the audio device section choosing OK then selecting back to Blackmagic audio then hit Ok. All of a sudden there was my external monitor and was able to scrub audio again. It's like it's sleeping knowing it should work until you poke it a few times to wake it up. How my Intensity Pro external monitor and scrubbing audio being related in any way is perplexing. Or am I being obtuse?
I would contact Blackmagic Design to make sure your drivers are current. Can you try that?
Thanks,
Kevin

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Issues with Office 2010 and Acrobat Pro 8

Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
Chomp

Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

Issue with Audio Playback and Uninterrupted Playback in MPE (Hardware Mode)

Similar Messages

Maybe you are looking for