Issue with Bank details infotype,

Dear Experts,
I have an issue from the client.
An employee was hired as trainee in last year on 1year trainee period. In month of March his trainee period was over and separation action was performed on same.
He was hired in system as permanent employee with new employee code from April month.
But when clients are entering bank details within Bank details infotype, his data is replacing old Bank details infotype.
So is it possible to stop folwing data from new IT09 to old IT09 and without delimiting the old IT09.
regards,
Surekha

Surekha:
I do agree with sikindar, actually your issue is in confussion....
Wat exactly you want and first of all y your terminating employee in between his service period, your thing is employee got permanent from trainee position, so for this you need to run the confirmation action rather seperating this employee and hiring another employee with a fresh employee code....
so Pls tell us wat exactly you want to and wat exact problem your facing in IT0009.
Regards,
TATA

Similar Messages

Problem with adding output field in Bank Details(Infotype 0009)

Hi All,
I hav a criteria like, when i select a value for a field corresponding value should be displayed in input/output field just beside the selected field.
To make you understand the criteria more clearly.In infotype 0009 we hav Bank key.When we select a bank key corresponding Bank name is displayed just beside Bank key field.How to achieve that functionality.
Can anyone help please. Its urgent...
Thanks a lot...
Sandeep.

To make my question more clear.I have created a new field in bank details infotype.Similar to the field Bank key in 0009 Infotype.As soon as a select the Bank no through F4 functionality i want the Bank no no to be selected and at the same time i want Bank name to be displayed just beside this field.
In short with 1 selection i want both Bank no n Bank name to be selected.
If i hav ti write the code where should i write the code.I hav also created a structure .I presume i need to write a logic for this requirement.But i dont know where to write the logic.

HT5622 During reviewing my new apple id with bank details it' showing the message " the payment method is declined " pls help what to do ?

During reviewing my apple id with bank details site showing that "the payment method is declined" pls help me what to do? my bank details are correct and that is i am sure

In countries where the iTunes Store only sells apps, the accepted payment methods are Visa, MasterCard, and American Express. Other payment types such as gift cards, store credit, monthly allowances, ClickandBuy, and PayPal are not accepted. Depending on your App Store country, prices may be listed in your local currency, US Dollars, or Euros. http://support.apple.com/kb/HT5552
Or
http://www.apple.com/support/itunes/contact/
https://getsupport.apple.com/Issues.action

ID de Apple By mistake I have open an apple account to unknown email address with bank details, is that a big probl ...

ID de Apple
By mistake I have open an apple account to unknown email address with bank details, is that a big probl ...

But I don't remember the password from that email address.i m unable to access that mail,I don't know somebody has had already starting download from that I'd,thanks for reply,anyway,

My pad won't download app or music keep saying its waiting something to do with bank details but duno how to fix it

My I pad won't downloads music or apps keeps saying waiting something to do with bank details but duno how to fix it

It is really important that you convey the exact message that you are getting. I interpret your statement two different ways.
Are the downloads stalled or in the "waiting" state and you can see the waiting icons?
Or are you being told that there is a problem with your credit card details?

How to Add IBAN Field in the Bank Details Infotype?

Hello All,
I need to know the procedure for How to add IBAN field in the bank details infotype?
Could anyone help me please.
I m new to SAP HR.
Immediate help will be appreciated.
Thanks.
Regards,
Mudassir.Imtiaz

Hi mudassir,
For IBAN implementation:
1. Implement SAP Notes 925410, 1409674, 1405521
2. Go to t-code FIBF - From menu select Settings - P/S Modules - of an SAP Application - Create entry
For Turkey we've added the following entry (depends on country) :
00003040 TR CONVERT_IBAN_2_BANK_ACCOUNT_TR
3. Go to V_T588M for module pool MP000900 and screen 2000 select IBAN & Q0009-IBAN00 fields as standard.
4. Go to table T77S0 and make value of ADMIN IBAN entry S.
Regards,
Dilek

Problem with 0009 bank details infotype....

Hi Experts,
I am updataing the bank account number.Even though i created the new record ,the system is showing the previous record s enddate as 31.12.9999.My new account numbers are updated from 01.02.2008.How should my record delimts the end date as 31.01.2008.
Please advice..
sai.

Hi Sai,
First, which subtype (0 or 1)of bank details inotype (0009) are u trying to update?
Also please check the time constraint of subtype 0 and 1 in view V_T591A using t-code SM30
If the time constraint is 1, then it will only overwrite the record. If you want to delimit the previous record, change the time constraint to 2.
Let me know if you have any questions.
Regards,
Reema

Restrict the user to create two bank details (infotype 009 subtype 001)

I have a user exit that can restrict the user to only create 2 infotype 9 with a subtype of 1. But the ESS application does not us the same screen user exit as the back end. Is there a way to limit the user to only be able to create 2 bank details using the enhancement framework or a badi. I am getting java errors when trying to cancel or exit after or before the create method in the if_hrpa_pernr_infty_xss interface. I have been looking at the hrxss_per_new_p0009_xx functions. I would like to accomplish this without changing the java code, if possible.

Are you sure this belongs to PI?
Regards,
Prateek

Vendor Payment documents print with Bank details(Bank name) in FBZ5

Dear All,
Here one of my client requirement is when we take printout using t.code FBZ5 for vendor payment documents, he wants to take print along with his Bank name (Name of the Bank and Name of the person), How can I generate check print after entering Bank details in Master data (Require Only for few vendors).
To track print details we are using standard t.code FBZ5, If I want update Bank details in print shall I maintain any settings before using FBZ5?
Kindly advice me....!
Thanks & Regards
Madhusudhan.B

Closed

Puerto Rico implementation-Bank details Infotype

Folks,
            We are implementing Puerto Rico payroll. We are treating all the configuration as part of US. while I was testing employee hire, I noticed in bank details info type the "Bank country key" is defaulted to Puerto Rico I was expecting it to be US Also payment method showing PR related payment methods. Any idea where I am missing? I would like to have Bank key as US and Payment methods should be part of US.
Any help is greatly appreciated.
Thanks,
Srini Nadendla

Hello,
   The bank country key is defaulted base on the employee company code (infotype 0001), the company code - country link is stored in table T001; If you need to modify this default I think you could use badi HRPAD00INFTYBL
   The payment method is defaulted based on feature ZLSCH, you can modify it if you need to change the default
Let us know if that works,
Best regards!
Federico

Issue with Master Detail OAF Page

Hi Friends,
I have an issue with the Master-Detaiil Page.
I have developed a Master-detail form in OAF similar to the one in Oracle Forms. The master details are appearing fine. I have created a transient variable selectFlag that represents if the master record is selected. I am also able to see the detailed records after I have written the code in CO to populate the details table when a master is chosen.
But in the detail table I am seeing all the records. I should be able to see only the records that are children for the master record.
I have created the ViewLink as well. How can I pass the id of the master record to the detail table.
Any ideas. Kindly help.
Thanks

Hi,
Are u using partialAction on master form for this ?
You can add parameters from property inspector and put some unique attribute from VO and later filter the details record based on that.
--Sushant

Issue with Bank adderss

Hi
We have requirement that bank address from Bank application (ESS) should not get updated in info type 9. The reason behind this is country and region is taken from info type 6 by default. When user updates main bank details from portal, then bank address and region might be mismatch.
Now we need that add only bank key in info type 9. It should not change the adderss at all.
But here we have time constraints so that we can not change function module or application.
If anyone have workaround to achieve this (pass only bank key in IT 9), please give your inputs if you have done?
Or If any user exit where and how it can be done?
Or SPRO setting to change application or badi?
-Yogesh

I believe its the standard feature based on the bank key selection, the address of the bank gets updated (I think ur referring to Stars field or some thing like that.)
If you want to change this behavior you can do the NWDS code change (in onEvent check the event and then make the field blank or as required ) or thought the badis.
Try the badi way as suggested by Sidh.

Vendor with Bank details - How to replicate?

Hi guys,
I need help for replicating Vendor bank details. I`m transferring vendors by BBPGETVD, but the bank details don`t go to SRM. I have tried to transfer basic data by R3AS where the object name is DNL_CUST_BNKA, didn`t work as well.
I`m using the transactions for this procedure: R3AS, BP, R3AC3, SE11 - table BNKA.
Any idea?
Thank you very much

Hi,
   Sorry for my late.
   I want to show the vendor data in the Portal, in case Bank Master. Besides, when we use BBPGETVD, the system shows that the No Bank Data maintain.
The complete message: No Bank Master Data Maintained No Bank Data Transferred
   Any help?
   Thanks a lot
Edited by: Alexandre Jantsch on Jun 29, 2011 5:24 PM

Regarding the issue with mater-detail table rows

Hi,
I am using Jdeveloper 11.1.2.1.0
I have a master - detail relationship based read-only tables in a page.
When i execute the master view using the bind variables , I also use a stored procedure to generate additional values to detail view rows using the master row values,
the selection in master table is at index zero for which the detail table row is not appearing. Once user select the next row for which detail row appears, then clicks the first master row , then only the first row's respective detail row appears.
I have tried using triggers and also tried to queue the selection event using row key values after master view execution and procedure call.
Give an idea to solve this issue.
- Ramey

Hi,
Then what can be the solution if it is the refresh timing ?
I tried to execute detail view with same bind variable as in view link along with view link execution,
assuming that master's first row is not set as current row to get the detail row based on the default first row selection in master view can trigger detail view .
Kindly suggest a possible solution.
-Ramey

Problem with bank details and option in pay method

I cannot log in with my account with app id because in my country si not an option with maestro card. What should i do?

If Maestro cards are not shown as an option on the payment details screen then you won't be able to use it - do you have one of the options that is shown ?
If not then are iTunes gift cards available in your country ? They are not available in all, and they are country-specific (they can only be redeemed and used in their country of issue).
It they aren't then you could create an account with 'none' as the payment option which will alloy to download free items : http://support.apple.com/kb/HT2534

Issue with Bank details infotype,

Similar Messages

Maybe you are looking for