Issue with battery after waking from sleep ...
Hey Everyone,
I just recently starting having battery power issues when I awake my machine from sleep. If I am working with a full battery ( or almost full ) say 80% and I put my machine to sleep, it goes to sleep (like it should). If I flip the machine over and press the button on the battery to check it's level I get 4 out of 5 green lights. This is all normal. Now for the strange part ... when I wake the machine back up, regardless of how long it has been asleep the battery meter switches to Red and "calculating..." and basically it shows the battery as empty. If I check the green lights on the battery at this point I get only 1 flashing green light. I do not however get the power warning message. If I check the battery levels in System Profiler it shows my full charge as around 1600 mAh ( around 5500 before it goes to sleep ) and remaining capacity at 0 ( around 4420 before sleep ).
Now, if I continue using the machine it doesn't run out of power ( obviously because the battery is still pretty much full although the system and battery itself doesn't think so ). If I wait long enough the "calculating..." status eventually corrects itself and suddenly I have 80% power and everything has returned to normal! However, if the machine goes to sleep before this, it won't wake up and I need to basically plug the machine in ... then it will turn on and switches to "Charging" which only take about 20 minutes to get a full charge seeing how the battery isn't really empty.
I have read all the posts on the battery issues and I have a machine that's only a few weeks old. It did not experience these problems at first. It seems as if they appeared after I ran the firmware upgrade.
Has anyone else experienced this behaviour? I have done a battery calibration with no luck ... I really feel it is a software issue and not hardware from what I can gather. Any ideas?
I should also note that if I put the machine to sleep with a full battery and also with the power adaptor still plugged in ( and green ) ... the machine wakes up just fine. However, if it goes to sleep on battery power then the trouble begins.
Cheers,
Michael.
MacBook Pro - 2GHz Intel Core Duo - 1 GB RAM Mac OS X (10.4.6)
Have you reset your PMU? The Apple website has instructions for doing that. It sounds like some power management problem, but beware of your battery bulging, which I'm sure is an actual chemical change. I actually only noticed my battery bulging when I removed my battery to reset the PMU, which didn't help me. Apple replaced my battery promptly... Your problem is different from the usual bulging battery, though, so I would reset the PMU.
I understand why you think it is software/firmware related, but I don't buy it completely... Near as I can tell, the charge indicator LEDs on the battery are technically independent of the computer, they still work if you take the battery out. I had a bulging battery and saw some funny things with the LEDs: the computer would completely shut down and I would get no LED signal, not even one light flashing. If I left the computer alone for a few hours, the LEDs would work again, and I could even turn on the computer and get up to 5 minutes of uptime out of it. Have you checked if your battery bulges?
Another thing you might try is check to see if the firmware update was successful. I read somewhere that there was a risk of the update failing and about a procedure for reverting the firmware. Find out how from Apple, though, some people post instructions on the discussions that are incomplete.
Similar Messages
-
Issues with MacBook after waking from sleep
I use my MacBook with an external display, mouse and keyboard most of the time. Frequently, when I unplug and wake my MacBook from sleep, a few odd things will happen:
- Finder (the desktop) will stop working. I usually have to restart it by pressing "Cmd Option Esc."
- The graphical transition for Spaces will not initiate. Changing from one Space to another will be instant. Clicking on the Spaces icon and going back to the desktop fixes this issue.
- The Dock will have a black pixel outline at the top. Again, initiating Spaces from the Dock fixes this issue.
- If iTunes is open, clicking on another view from the source window (i.e., going from Music to Podcasts) will move the window location.
I've experienced these issues before I formatted my machine (I was also running a previous version of 10.5) so I'm going to rule out an OS issue on my end. But I'm thinking it could be software or hardware related - anyone have any similar issues?I've been suffering from this too, and am currently trying this:
http://www.ewal.net/2012/09/09/slow-wake-for-macbook-pro-retina/
Seems to be tied to this 'Power Nap' feature. I tuned it for 12 hours instead of 24. -
Airport crashes with Leopard after waking from Sleep mode
So I've always had airport issues (1st gen intel) and I was hoping Leopard might help, but now my airport shuts down every time the computer sleeps and it cannot be turned on. I have to shut down the comupter and turn it back on (restart doesn't work).
Any ideas?I spoke with Tech Support this morning. Apparently this is a known issue with Lion. I found it interesting that the rep insisted on saying that "it is the way Lion functions" instead of admitting that it is a GLITCH in the programming. He even said that it happens randomly and not on all computers and not all users experience this. That ought to tell you that it's a glitch. Anyway, there is a "workaround" which is what you do to put a bandage on a persistent wound that should really get surgically stitched:
You either have to log out every time you leave the laptop, or you have to change Energy saver preference to set the display to go to sleep AFTER the computer is set to log out (in Security preferences).
Here is the article that instructs us on applying the bandage::
http://support.apple.com/kb/TS4135?viewlocale=en_US
Suffice it to say that Apple does not plan on stitching this one up any time soon.. -
Gray screen with lines after waking from sleep or opening lid after closed
I have a 2.4 gHz Aluminum Macbook (Late 2008) with backlit keyboard running Lion. Every time I wake it up after the screen goes black or when I open the lid after I've been gone for a while, a gray screen with thin vertical colored lines appears (the lines are in different positions every time). I can hear sound when I press the volume buttons and I can eject CDs. Usually it fixes when I close it and re-open it. When I'm working with multiple monitors, it is nearly impossible to get out of- I have to unplug the Mini Display Adapter and THEN re-open it.
All I have seen on the internet is to update your OS but mine is completely updated. Maybe the screen is going out? I've reset the PRAM and SMC with no luck.
Any help would be appreciated, KoltonMy March 2011 MBP did the same thing.
After spending about an hour online with Apple Care without success, I did a reinstall of the Lion OS. It fixed the problem. I was concerned that I would lose data or settings, but the reinstall was seemless and everything was the way it was before the reinstall except that the "black screen on wake" problem was fixed.
I started the reinstall before I went to bed and it was waiting for me the next morning.
Here is a link to the page on how to do the reinstall:
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
Hope this helps. -
Macbook Retina with Mountain Lion issues after waking from sleep.
Macbook Retina with Mountain Lion has the spinning beach ball of death after waking from sleep a few times. Anyone else seeing this? A fresh boot is very quick, but waking from sleep lags at times. Then after a few times the spinning beachball of death appears and nothing is responsive making me reboot the machine.
I've been suffering from this too, and am currently trying this:
http://www.ewal.net/2012/09/09/slow-wake-for-macbook-pro-retina/
Seems to be tied to this 'Power Nap' feature. I tuned it for 12 hours instead of 24. -
Trackpad unresponsive after waking from sleep with new 17" MacBookPro
We have two 17" MacBookPros and both have this symptom. After waking from sleep or booting, the trackpad is unresponsive. Eventually full control comes back to the trackpad but it takes a while.
Both computers are up to date with all software.
Any thoughts?
Really irritating.Perhaps they are freezing for awhile? Maybe basic repairs are in order.
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
DALE -
External Hard Drive Fail After Waking from Sleep
Hi,
I've been having this issue for over a year (since upgrading to Lion, and now still persists after upgrading to Mountain Lion), and I haven't been able to find the exact answer I need after searching through the posts here, and on the internet.
I have a 2011 MBP, and after upgrading to Lion last year, I've noticed that my WD external hard drive for the Mac has issues to be recognized after the laptop wakes from sleep. The drive icons are still there on the desktop, and all the files are listed. However, I cannot open any of the files, and Time Machine backup automatically fails.I am able to eject the drives by dragging the icons into the trash can. However, nothing happens if I simply unplug the fire wire 800 cable and re-plug it into the computer after ejecting the drives. I need to reset the external drive by unplugging both the fire wire cable and the power supply, and replug everything.
Aside from being a hampering process after waking from sleep, this is also very stressful on the drive itself, so I would like to fix this. Does anyone know the issue behind this or have a solution? Thanks in advance!Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions.. -
Kernal panics after waking from sleep on MBP
I have a client machine that continues to crash after waking from sleep. Most of the logs indicate its a USB driver issue but not all of them which make me question whether it is truly a USB issue.
Here is the first log:
Interval Since Last Panic Report: 42291 sec
Panics Since Last Report: 1
Anonymous UUID: 4D739B74-806B-4EE5-B643-3ABC69B99DB3
Mon Jan 21 14:40:59 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816c6e1f, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff806a45a628, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0xffffff806a5541f8, RBX: 0xffffff806a554000, RCX: 0x0000000000826f90, RDX: 0x0000000000000000
RSP: 0xffffff807e493bc0, RBP: 0xffffff807e493ca0, RSI: 0x000000807e878986, RDI: 0xffffff807e493c39
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff800a69e600
R12: 0xffffff806a458000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff807e493bc0
RFL: 0x0000000000010286, RIP: 0xffffff7f816c6e1f, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff806a45a628, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff807e493870 : 0xffffff8000220792
0xffffff807e4938f0 : 0xffffff80002c4794
0xffffff807e493aa0 : 0xffffff80002da55d
0xffffff807e493ac0 : 0xffffff7f816c6e1f
0xffffff807e493ca0 : 0xffffff7f816e3c05
0xffffff807e493ce0 : 0xffffff7f816c5257
0xffffff807e493d10 : 0xffffff7f80c9a832
0xffffff807e493d50 : 0xffffff7f8174d4f0
0xffffff807e493da0 : 0xffffff7f8174f692
0xffffff807e493de0 : 0xffffff7f8174f7c4
0xffffff807e493e20 : 0xffffff7f80c9e4c5
0xffffff807e493e60 : 0xffffff7f80c9e628
0xffffff807e493e90 : 0xffffff7f80ca1fd7
0xffffff807e493ef0 : 0xffffff800063d4d6
0xffffff807e493f30 : 0xffffff800063c250
0xffffff807e493f70 : 0xffffff800063c0f4
0xffffff807e493fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 42049368948948
last loaded kext at 16300805887472: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80795000, size 16384)
last unloaded kext at 16406017984235: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80795000, size 12288)
loaded kexts:
com.lightspeedsystems.kext.LsSaKernel64 2.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AudioAUUC 1.59
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 6
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 4
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x14100000 / 4
Second log---------------------------------------------------------------------------- -----------------------------------
Interval Since Last Panic Report: 18613 sec
Panics Since Last Report: 1
Anonymous UUID: 4D739B74-806B-4EE5-B643-3ABC69B99DB3
Wed Jan 30 13:21:54 2013
panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816d61f1, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000012562c000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0x480001eabd058d48, RBX: 0xffffff806a6af000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff807ef03b60, RBP: 0xffffff807ef03b70, RSI: 0x000000000000012c, RDI: 0xffffff806a6af000
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff80002dad00
R12: 0xffffff806a6af000, R13: 0x0000000000000000, R14: 0xffffff806a6af000, R15: 0xffffff807ef03bc0
RFL: 0x0000000000010282, RIP: 0xffffff7f816d61f1, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000012562c000, Error code: 0x0000000000000000, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff807ef03810 : 0xffffff8000220792
0xffffff807ef03890 : 0xffffff80002c4794
0xffffff807ef03a40 : 0xffffff80002da55d
0xffffff807ef03a60 : 0xffffff7f816d61f1
0xffffff807ef03b70 : 0xffffff7f816d7413
0xffffff807ef03bb0 : 0xffffff7f816c6e31
0xffffff807ef03ca0 : 0xffffff7f816e3c05
0xffffff807ef03ce0 : 0xffffff7f816c5257
0xffffff807ef03d10 : 0xffffff7f80c9a832
0xffffff807ef03d50 : 0xffffff7f8174d4f0
0xffffff807ef03da0 : 0xffffff7f8174f692
0xffffff807ef03de0 : 0xffffff7f8174f7c4
0xffffff807ef03e20 : 0xffffff7f80c9e4c5
0xffffff807ef03e60 : 0xffffff7f80c9e628
0xffffff807ef03e90 : 0xffffff7f80ca1fd7
0xffffff807ef03ef0 : 0xffffff800063d4d6
0xffffff807ef03f30 : 0xffffff800063c250
0xffffff807ef03f70 : 0xffffff800063c0f4
0xffffff807ef03fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 18633492210750
last loaded kext at 37211407179: com.lightspeedsystems.kext.LsSaKernel64 2.0.0 (addr 0xffffff7f810cc000, size 147456)
last unloaded kext at 198602469343: com.apple.driver.AppleUSBTCKeyEventDriver 227.6 (addr 0xffffff7f814fc000, size 8192)
loaded kexts:
com.lightspeedsystems.kext.LsSaKernel64 2.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AGPM 100.12.75
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 7
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x14200000 / 1
Sorry for the huge post. The lightspeed kext shouldn't be causing problem as we use this program for all mac machines, I also did extensive troubleshooting with it. I did ask her to stop using the logitech USB device but she said it didn't make a difference, it was a plug and play device, would it still cause this issue without having it plugged in?
Thanks in advance for the help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Restarting after waking from sleep
I have a mid 2010 macbook pro running Mountain Lion OS X 10.8.3 of which keeps restarting after being left in sleep mode for an hour or two. When waking from sleep mode, the mac functions for about 5 seconds, before restarting by itself. I have tried deleting certain plist files (as suggested by other posts) but that doesn't seem to have helped. I have also recently installed a new hard drive, but i continue to have the same problem. Below is the panic report from the recent restart after waking from sleep mode:
Thu May 23 22:40:58 2013
panic(cpu 0 caller 0xffffff7f9a7957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811b9a5000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff810a102f80 : 0xffffff801a01d626
0xffffff810a102ff0 : 0xffffff7f9a7957f2
0xffffff810a1030b0 : 0xffffff7f9a8923b9
0xffffff810a103110 : 0xffffff7f9a89242e
0xffffff810a103180 : 0xffffff7f9abb8c82
0xffffff810a1032b0 : 0xffffff7f9a8b8fe8
0xffffff810a1032f0 : 0xffffff7f9a79d567
0xffffff810a1033a0 : 0xffffff7f9a79b05a
0xffffff810a1035a0 : 0xffffff7f9a79c983
0xffffff810a103670 : 0xffffff7f9b8b5790
0xffffff810a103730 : 0xffffff7f9b8e0f98
0xffffff810a1037b0 : 0xffffff7f9b8c8308
0xffffff810a103810 : 0xffffff7f9b8c8be9
0xffffff810a103860 : 0xffffff7f9b8c909b
0xffffff810a1038d0 : 0xffffff7f9b8c98d1
0xffffff810a103910 : 0xffffff7f9b89534f
0xffffff810a103a90 : 0xffffff7f9b8c5e39
0xffffff810a103b50 : 0xffffff7f9b893de8
0xffffff810a103ba0 : 0xffffff801a4650c9
0xffffff810a103bc0 : 0xffffff801a466670
0xffffff810a103c20 : 0xffffff801a46408f
0xffffff810a103d70 : 0xffffff801a0984a1
0xffffff810a103e80 : 0xffffff801a020aed
0xffffff810a103eb0 : 0xffffff801a010448
0xffffff810a103f00 : 0xffffff801a01961b
0xffffff810a103f70 : 0xffffff801a0a5dd6
0xffffff810a103fb0 : 0xffffff801a0cdd43
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a738 000->0xffffff7f9aa45fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f9 aa53000->0xffffff7f9ad74fff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f9b882000 ->0xffffff7f9b94efff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x0000000019e00000
Kernel text base: 0xffffff801a000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3064164203775
last loaded kext at 299154607765: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f9c477000, size 229376)
last unloaded kext at 354384336276: com.apple.filesystems.msdosfs 1.8 (addr 0xffffff7f9c469000, size 57344)
loaded kexts:
com.Logitech.Unifying.HID Driver 1.3.0
com.Logitech.Control Center.HID Driver 3.7.0
com.apple.filesystems.smbfs 1.8
com.apple.filesystems.exfat 1.3
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.87
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.GeForce 8.1.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelHDGraphics 8.1.0
com.apple.driver.AppleIntelHDGraphicsFB 8.1.0
com.apple.driver.AppleMuxControl 3.3.0
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleUSBHub 5.5.5
com.apple.iokit.AppleBCM5701Ethernet 3.6.0b1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.nvidia.nv50hal 8.1.0
com.apple.NVDAResman 8.1.0
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.driver.IOBluetoothHIDDriver 4.1.3f3
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Any suggestions would be greatful,
Thanks,
MarieReplace the pair of DIMMs first.
Monitor the temps inside.
Install and use SmcFanControl 2.2
Run Apple Hardware Test
You may want to try a clean system install to test with once you have the RAM replaced. Faulty RAM can cause all kinds of issues. And dirty files. Some deeper check for corrupt files than Disk Utility is probably in order.
There is a significant "Inrush-current" on boot and wake from sleep with the 2008s. They need good power, a 1500VA/900W UPS, and sensitive to other equipment on the same circuit.
Inrush current -
Logic Pro X inaccessible after waking from sleep when using an MCU Control Surface
I'm having a problem I cannot seem to get around without force quitting Logic every time. If I have a Control Surface setup as a Mackie Control (v1.0); and if the computer goes to sleep, and then i turn off the controller while the computer is asleep (for any reason), and then wake the computer without turning on the controller first, Logic becomes completely unusable and must be force quit.
My controller in this example is Solid State Logic's Nucleus controller, however it happens with other Mackie Control compatible controllers (i have another one i tested against), BUT not a real Mackie Controller sold by Mackie (i tested with that as well); more details below.
For the SSL controller, Logic automatically sets it up like this:
Now if the computer goes to sleep, and i wake it up, i get the following dialog, which is fine:
After clicking on "Continue" button or hitting the enter key, Logic is rendered useless, as if there is a modal dialog still open somewhere. Clicking anywhere on the gui results in white flashes and nothing else. doing cmd+Q to quit actually makes it try to quit (a save dialog appears), but it never does successfully quit, making me resort to force-quitting. For an example, here's a pic of the file menu at this point:
I also have a regular Mackie Control Unit (MCU Pro) and the strange thing is with that unit, everything works fine after sleep, turning off controller, and re-awakening. However, there is a difference in what kind of dialog is displayed after the sleep, which probably has something to do with this issue.
Here is the setup screen of the MCU Pro:
And here is the dialog for the missing ports after waking from sleep:
This dialog is completely different than the other control surface's missing ports dialog. When clicking on "Keep unassigned" here, Logic resumes working fine.
The project is as minimal as possible; nothing is loaded, all that's there is an empty instrument track and a Control Surface configured.
I'm using a Mac Mini (late 2012)
Processor 2,6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000
Software OS X 10.9.4 (13E28)
with Logic Pro X 10.0.7
Any help would be greatly appreciated!!Did you ever figure out a solution to this problem?
I just pulled out my original Emagic Logic Control (MIDI) and I have having the same problem. -
After upgrading to Tiger, freeze after waking from sleep on PM G4
My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
When I installed Tiger, I used the 'archive' option.
My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
I also see an error in the system.log which may reveal what is going on:
Nov 20 18:54:40 localhost kernel[0]: standard
timeslicing quantum is 10000 us
Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
2005 11: 46:54)[44]: starting
Nov 20 18:54:40 localhost kernel[0]:
vmpagebootstrap: 284852 free pages
Nov 20 18:54:40 localhost kernel[0]:
migtable_maxdispl = 70
Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
modules
Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
1982, 1986, 1989, 1991, 1993
Nov 20 18:54:40 localhost kernel[0]: The Regents of
the University of California. All rights reserved.
Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
headers and 2949 cluster IO buffer headers
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
9 already taken
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
AppleUSBOHCI[0x2057000]::start OHCI controller will be
unloaded across sleep
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
TI ID 8019 built-in now active, GUID 000a27ff
feb38fe6; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
VendorID 1033 ID cd PCI now active, GUID 0000303c
0008c32e; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: Security auditing
service present
Nov 20 18:54:40 localhost kernel[0]: BSM auditing
present
Nov 20 18:54:40 localhost kernel[0]: disabled
Nov 20 18:54:40 localhost kernel[0]: rooting via
boot-uuid from /chosen:
474ACE52-2523-3EE7-9C54-DDC3734C7922
Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
ID="0"><key>IOProviderClass</key><string
ID="1">IOResources</string><key>IOResourceMatch</key><string
ID="2">boot-uuid-media</string></dict>
Nov 20 18:54:40 localhost kernel[0]: Got boot device =
IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
Nov 20 18:54:40 localhost kernel[0]: BSD root:
disk0s10, major 14, minor 10
Nov 20 18:54:40 localhost kernel[0]: jnl:
replay_journal: from: 2668032 to: 12288 (joffset
0xe04000)
Nov 20 18:54:40 localhost kernel[0]: Jettisoning
kernel linker.
Nov 20 18:54:40 localhost kernel[0]: Resetting
IOCatalogue.
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 2
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
loaded and registered.
Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
filtering initialized, default to accept, logging
disabled
Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
Ethernet address 00:0a:27:b3:8f:e6
Nov 20 18:54:41 localhost launchd: Server 292f in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
abnormally: Hangup
Nov 20 18:54:41 localhost lookupd[56]: lookupd
(version 365) starting - Sun Nov 20 18:54:41 2005
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk0s10 hfs
474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
Nov 20 18:54:41 localhost kernel[0]: jnl:
replay_journal: from: 1374208 to: 1564160 (joffset
0x624000)
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk1s10 hfs
947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
/Volumes/Backup
Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
[98000000:08000000]
Nov 20 18:54:43 localhost
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
Login Window Application Started
Nov 20 18:54:43 localhost loginwindow[72]: Login
Window Started Security Agent
Nov 20 18:54:44 localhost mDNSResponder: Adding browse
domain local.
Nov 20 18:54:45 localhost kernel[0]:
UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
Full Duplex
Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
setting hostname to "Jason-Radtkes-Computer.local"
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
executing
/System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
posting notification
com.apple.system.config.network_change
Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
lookupd (version 365) starting - Sun Nov 20 18:54:47
2005
Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
target=enable-network: disabled
I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
Thanks in advance for your help.Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
Ron -
"Photoshop transparent background" after waking from sleep
Anyone experienced this problem? Photoshop users will be familiar with the terms I'm using to describe this issue...
After waking from sleep, my iMac will display the screen saver -- in this case, "Beach" -- in a frozen state (not moving at all). The photo has a lower opacity, with a checkered background similar to what you'd see in Photoshop when the background is Transparent rather than opague. Clicking on the mouse or keyboard has no effect, but when I turn the power off and then on again, all is back to normal, with the Leopard desktop and Dock back in their normal places.
Is this the system freeze that folks have been talking about?Ok I am not that fmrealer with Photoshop. But this is what I would do.
1. Resart my computer.
2. Call apple or Photoshop.
3. Re install Photoshop.
4. It is not the end of the world and it sounds kind of cool. -
Display will not sleep any more after waking from sleep
My Macbook has recently started misbehaving after waking from sleep. Started putting the entire MB to sleep each night by closing the lid. When I wake it in the morning everything seems normal, no error messages. However from that point forward the display will not dim or sleep. I've tried re-applying my settings in System Preferences -> Energy Saver. Pretty much the only fix has been to reboot, which is annoying and Windows-like.
In the interest of full disclosure, I have "fast sleep" enabled (aka hibernation mode disabled) but I've had that since I bought my MB with 10.5.1 on it. So I don't think it's related. In fact I changed to the default Energy Saver profile to see if that fixed the problem (it didn't), which re-enabled hibernation mode and I then had to re-disable hibernation.
I want to say this started happening after the 10.5.4 update, but that may have been a coincidence as to when I started sleeping it each night... I don't exactly remember.
I downloaded Cocktail to run all the cron jobs, etc, that don't get run when sleeping at night, and that didn't help either.
Any suggestions? Anyone else ever see this? Seeing it now?
Thanks!This is still an issue for me.
I sleep my Macbook every night by closing the lid. After doing this a few times, the display either stops sleeping, or stops locking. I have the lock menu in the Apple menu bar, and even selecting "Lock screen" will not work.
Sometimes a reboot fixes it, sometimes I have to reset the SMC.
Any info out there? -
Freeze after waking from sleep mode on MBP retina
After waking from sleep mode my MBP retina freezes for 3-5 seconds. Mouse and touchpad don't work. I wonder if it's mountain lion problem or hardware problem. Anyone faced this?
Just got a brand new model and OS X 10.8.2 (12C3012) and face the same issue, almost everytime it sleeps for too long. This is not a 3rd type SDD, this is a standard Apple SSD. I turned off the BT, I removed the almost every option from the battery saver mode. The current test is to disable the power nap - I will let you all know the result in a few hours.
-
IMac loses WiFi connection after waking from sleep on OSX 10.8.2
Bought a new mid-2011 21.5 inch IMac this week. It is not re-establishing WiFi connection after waking from sleep. Was happening on OSX 10.7 that it came with, so updated to 10.8.2 and same problem exists.
I am running a mid 2012 MacBook Pro with Retina Display alongside, on OSX 10.8.2 and no problems at all. Cannot work out what is causing the IMac to fail and neither can Apple!
Could it be the Netgear Wireless Router 3 years old? Full signal strength!Me too!
I am on a MAC Pro desktop and I am having the same issues. I go to system preferences and just click the network icon. Then I close mail and when it opens it now sees the network. This is getting very annnoying.
Maybe you are looking for
-
How to force refresh of data through browser or PDF?
We have the dashboard set to refresh every minute. We are pulling the data using XML from DB. When we are in browser and clear the browser cache and then reload the .swf... the data is updated. We haven't been able to figure out how to force the c
-
"View JNDI tree" link not visible under monitoring tab of myserver?
Hi, The link "View JNDI tree" as mentioned in chapter 18 of administration guide is not visibile on my installation of 6.1 beta. Is there some configuration setting that i need to do to make this link visible. I am having problems with installation a
-
When trying to open an html file firefox keeps opening the open file dialog in a new tab. I have run malware byte with no success. The file never opens. Finally refreshed Firefox problem resolved...
-
Hi I have two fields one for reporting period and another for Creation date on which user can seletct on selection screen(variable). I have made both of the variable mandatory so that if user does not enter value any one of them , it is showing m
-
Address Paragraph in SAPSCRIPT
Hi guys, I had a Address Paragraph which has 8 lines. How can I can display the line 6 which is the PERSON for the name of your contact person: u2018Attn: Mr. Jeffriesu2019.? Tnx