Issue with BDC processing of F-65 after upgrade to ECC 6.0

Dear ABAP gurus,
We have upgraded our SAP system from version 4.7 to ECC 6.0.
We are facing issue when processing BDC sessions for transaction code F-65.
The screen which appears for Assignment to a profitability segment creates issue when processing BDC for F-65.
The screen name is SAPLKEAK and the corresponding screen number is 0300.
This screen displays the characteristic and its corrsponding values. The characteristics and its values are pulled in from FICO Config at runtime when you execute F-65 and all relevant Tcodes of business transaction RFBU.
We checked for the characteristics maintained for Characteristic group via std. transaction code KEPA. It shows 4 characteristics listed of which 2 are optional and 2 are mandatory. The same settings are available in older version as well as in ECC 6.0. Also validated the assignment of characteristic group to the actual data i.e to the business transaction RFBU via Tcode KE4G.
When we do recording in SHDB in both the systems, the older version shows it correctly displaying 4 fields(2 optional and 2 mandatory) in the Assignment to a profitability segment screen whereas the new system displays some 12 additional fields. Also none of the fields appear mandatory.
The issue is we are still not able to identify whether this is a technical issue or functional issue.
Searched for relevant OSS notes but couldn't find any.
Anyone of you who have faced this issue, please respond immediately.
We have this issue to be resolved on high priority.
Help will be highly appreciated.
Regards,
Kavita

This issue was also posted with an OSS-message to SAP, and the solution was to run this program SD_PLANVALUE_UPDATE
Berit

Similar Messages

Issue with the material field in ME23N after upgrade

Hi Experts,
We are having an issue with transaction ME23N in ECC6.0 after upgrade from 4.6c.
In this transaction for the given PO the value of the material is not populating. The material coloumn is displaying but the value of the material is not coming.
For the same PO with the same data we are able to see the material number in ME23N in 4.6c.
Please help me to resolve this.
Thanks,
Rakesh

Hi,
If you are a functional consultant then check the configuration settings in SPRO and compare it with the one in 4.6c system to find if the material number display in ME23N is enabled in your new system or not. Go to tcode SPRO and Material Management-> Purchasing->Purchase Order->Define Screen Layout at Document level.
Execute this and select on ME21N or tcode that you are having problem with. Then press details button and double click on Enjoy fields. Check if it Display check box is ticked or not.
KR Jaideep,

Issues with songs/older NI AU settings after upgrading logic and NI AU

Hi All,
I'm digging around the net for this, but thought I'd ask you all.
I have older songs created with Logic 7 on a PPC with Absynth 3. I have since upgraded to an Intel and Logic 8.02 and also have upgraded to Absynth 4. When I open this older song, all is well except it attempts to load the older version of Absynth (3) and fails. The real issue for me here is that I have settings created on the Absynth 3 inst that I need to re-create the older song with the newer code. Is there a way to load the song to use the newer versions of third party software with the settings used when created on an older version?
Maybe some import process?
Thanks!!!
Tad

No. As far as the application goes, Absynth 3 is a totally different plugin than Absynth 3. If you have saved your presets into a new file, then Absynth 4 is likely able to read from there.
Christian

Issue with bringing up Weblogic 10.3 after changing username passcode

I am facing Issue with bringing up Weblogic 10.3 after changing username passcode in security realm Madhok, basically i have removed the default weblogic user and defined m,y own custome user and provide the credentials in the server start tab. When i try and bring up the admin server it comes up fine but the managed servers fail to start from admin console and i can see security credentials authentication error in logs? Why would that be considering the admin server is able to come up with the same credentials.
-Priya Madhok
Systems Architect
InterAlliance Group Services
http://www.interalliancegroup.com

We had similar problem in the past, our problem was:
Problem:
We deleted weblogic default user from security realm and create new user when node manager and the managed servers were down. When we tries to bring up the managed servers after starting node manager we kept getting authentication denied errors.
Solution:
Recreate weblogic user and now try and bring up managed servers from command line using weblogic user. Once they are up shut them down and bring them up again with the new user you have created and it will work
Reason:
The managed servers in 10.3 seems to be storing the authentication details in there local managed servers ldap or cache. When you start the managed servers the don't know the new credentials and are authenticating against older values of stored credentials, hence they fail. Once they are started with the old credentials they communicate with admin servers to sync there cache with admin servers and the new credentials gets updated and from then on you can restart the managed servers with new credentials.
Note: Sometimes after restart you may face the problem as the sync process with admin server is asynchornous, weblogic prints a line saying something like Performing async operation with server address null. If the line gets printed sync has happened and you are good. In case you don't see the line restart again and you will see the line after which you can restart with new credentials.

Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

You will not belive how I accidently solved this - !!!
Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
what a mad techno world we live in! :-)
Dave

ERROR MESSAGE IN PPOME TCODE AFTER UPGRADE TO ECC 6.0

Hi Experts,
I have a question.
Recently our system went for upgrade and during testing phase we have found one issue.
Error message is appearing in PPOME transactio code after upgrade to ECC 6.0
The screen is getting defaulted to Budget section and unable to find the subtype as there are no subtypes available there and showing error message as "Fill in all required fields".
Please let me know your solution on this.
Regards,
Sekhar.

Hi,
- you can deactivate the budget tab in the IMG-activity 'Hide/Show Tab Page'
(SIMG_CFMENUOHP1HFW20 alternatively use SM30 on view 'T77OCTABUS')
1. Create new entries for the following KEY:
a) Scenario OME0
b) Object type 'P', 'O', 'S'
c) Tab Page 'PBC_ORIG'
2. for each of this entries, set the 'Exclude Tab Page'-Flag.
- in case you do not want to deactivate the Budget tab:
The error occurs due to missing entries for subtypes in table T778U
for infotype 1516.
Please maintain the according subtyes you want to use if you create a
budget.
Regards,
Ana

Statistical-relevent delivery date not showing up in PO after upgrad to ECC

Hi Gurus,
After upgrade to ECC, Statistical-relevant delivery date (PO Item details --> delivery schedule tab) is not showing up when I convert PR to PO from Stock requirements list(MDO7).
Could you please help me out this issue.

Maintain the item category in your material master at sales organisation level and try again.
Also Please Check the delivery item category determination in trxn code 0184 there you define which item category is to be found for the combination of delivery type NL and item category group.
Regards,
Ashok
Edited by: Ashok Kumar Telikula on Aug 27, 2008 2:35 PM

Special Characters in Packed Field After Upgradation from ECC 5 to ECC 6

Hi All,
After Upgraded from ECC 5 to ECC 6, we are getting error as 'Packed field contains incorrect BCD format'.
I found the error in below code..
CALL METHOD cl_abap_container_utilities=>read_container_c
      EXPORTING
        im_container           = j_2iextrct-extrctdata
      IMPORTING
        ex_value               = i_rg23part2-i_part2_typ
      EXCEPTIONS
        illegal_parameter_type = 1
        OTHERS                 = 2.
i_rg23part2-i_part2_typ-EXAED = 0.<0
i_rg23part2-i_part2_typ-CESS   = 0.<0
for some packed fields special characters are appearing, which leads to a short dump.
Any Suggestions.....
Thanks,
Satish Reddy.
Edited by: Sathish Reddy on Jun 25, 2010 4:49 PM
Edited by: Sathish Reddy on Jun 26, 2010 11:01 AM
Edited by: Sathish Reddy on Jun 29, 2010 12:58 PM
Edited by: Sathish Reddy on Jun 30, 2010 11:51 AM

HELLO,
Search the form you will get few links.
Also many companies have gone technical upgradation , but not functional upgradation.
Thanks
RK

Barcode doesn't work after upgrade to ECC

Hi All,
In sapscript, we used bardcode. But after upgrade to ECC, it doesn't work.
Could you help me about it??
And we don't want to convert the sapscript to smartforms and use the new barcode technique.
Looking forward you help!!
Thanks & Best Regards,

Hi ,
I think some function moule is missed, please check the driver program also. In production you are getting Barcodes ?. Or otherwise goto se73 - we have bar codes types.. system and printer barcodes . please assign the printer bar codes in output devices.
Best Regards,
Narasimha Rao.

Issue with BDC of ME22N to change gross price of service.

Hi,
I have a requirement where I have to undelete the PO > services tab of the item details > change the gross price to the value thats calculated by the program for each of the services of the PO > set the deletion indicator to the PO.
The spec says to use a BDC of ME22N to acheive this but after creating the recording I have had several issues with some PO's that interrupt the BDC because they bejave differently from the recording I did.
On most cases when im running the BDC in foreground after changing the gross price and pressing enter I get a new windowthat appears asking for the account assingment of service, on this window the G/L account information is ussualy passed automatically then the bdc clicks back and the process continues normally. On other services after changing the gross price and pressing enter I get the account assignment of service window but the G/L information is not passed and when the bdc clicks back the G/L account information gets passed instead of going back and the BDC stops, if I manually click back again the process will continue.
With single service PO's the process is completing, this issue is happening with PO's that have multiple services.
I know ME22 should be used for BDC and not ME22N, but the functional insists to correct the issues with the BDC of ME22N. Also I atempted to use BAPI_PO_CHANGE but I dont think this bapi can not update the gross price of each of the services, it can change the net price but this is not my requirement.
Is there a bapi that can change the gross price of each of the services of the PO?
Please advice me on this.
Edited by: bodyboarder1 on Dec 2, 2010 3:33 PM

Hi
If you really need a BDC program, try to simulate ME22 instead of ME22N
Max

Issue with page processing - confirmation message & show /hide a button..

Hello,
I am working on a to do list application.
I have events and for each event, I show list of tasks (grouped in reports based on the calculated task's status).
In one region I have a drop down list of events and a Select Event button.
For each task, I had to create a CLOSE option (initially I used a link, but the requester wanted a confirmation before closing the task).
Now I have a checkbox for each task (generated dynamically with apex_item.checkbox(1,task_id)).
Closing a task in my application means to set the end_date to sysdate.
I followed the instructions from
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/check_box.htm#CEGEFFBD. I've created also a button and a process and updated the sql from "delete" to "update".
The process is set: OnSubmit - After Computations and Validations; Run Process Once per page visit (default).
The issue number 1 is that I see the confirmation message (that tasks have been closed) every time I reload the page (the same when I click Select_event button).. not only after I press on that Close_task button..
For issue number 2, I have to mention that I've added a condition to show / hide the Close_task button, only if I have at least 1 task in the report.
The issue number 2 is that I see the button only if I click 2 times on the Select_Event button.. The same is for hide.
I feel like I am missing something very important about how to synchronize different events(buttons clicks), processes..
help..?
Thank you!
Anca

This forum is magic..
As soon as write here, I find the answer!
Issue 1: I fixed it by specifying this: When Button Pressed (Process After Submit When this Button is Pressed) and my button. I miseed this 1st time.
Issue 2: I moved the button after the report.. and now it's working just fine!
I did this about it for some time before asking the question here.. but I just had to write here and got the right answer ;)
Have a nice day!
Anca

Issue with PO Currency when currency changed after the approval.

Hi All,
we have get an issue with PO currency which is as follows
Step1:Created a Limit PO with value 3.701,00 CHF and sent it for approval,,and PO is approved and transfered to backed (We are using "Extended classical scenario' .
Step2:but we got to know that the PO value should be in USD ,so will go to PO and changed the currency value to USD ,it coveted value to 3421 but ,since i need the 3701 USD i changed the value to 3701 at item level and orderd the PO.
but after approval , when it transfered to backed it is showing the value 3.701,00 USD at header level ,but 3.402,84 USD at item level.
so when we are trying to create GR it is populating 3.402,84 USD but we need 3701 USD.
is any one know the what is the problem with this.
please help
Regards
cb

You can re-output a message that has already been outputted (printed or transmitted).
"Repeat message" function
You use this function if you wish to print out or transmit again a complete purchasing document that has already been outputted. Note that the system takes account in the message of any changes made to the purchasing document since it was last outputted - i.e. the system always outputs the current status of the document. If you wish to have old statuses available, you must optically archive the purchasing document.
Activities
You invoke the Messages screen as follows:
Via the purchasing document itself (Header Messages) or
Via <Purchasing document> Messages Print/transmit.
Enter the processing status 1 (successfully processed) and display the messages.
Select the desired message and choose Goto-> Message details.
Choose Edit-> Repeat message or Change message.
The system inserts the new message. If a change message is involved, the system sets the Change indicator.
Save your data.
Hope you find this useful.
Edited by: Reetesh on Dec 3, 2011 7:36 PM

Issues with DNG Flat Field Plug-in after installing updates

Hello,
First of all many thanks to the Lightroom-team for making the DND Flat Field Plug-in available. I am using it to correct images taken with non-retrofocus M-mount lenses on a Sony NEX-7. I have previously used CornerFix, which worked fine, but the workflow in conjunction with Lighroom isn't really convenient.
Now to the issue I am facing: initially, the plug-in worked very well, but after installing all recent CS6 updates, I am now receiving the following after selecting the reference image:
A new DNG-file is still created, with some adjustments being made, but it looks like not all vignetting and color casts are being corrected. After dismissing the above message, Lightroom keeps showing the flat field correction task as still in progress:
This can be cancelled, and I can continue to use LR without any problems. When I attempt another flat field correction, I face the same issue.
Has anyone else experienced this issue? And is it possibly correlated with the installation of a specific CS6 update (of which there have been quite a few over the past week or so)?
I should probably note that I'm running LR 4.2 on Mac OS X 10.7.5 and a Mac Pro 2008 with 24GB RAM.
TIA for any feedback!
Best,
Ron

I had the exact same issue with LR4.2, that is until yesterday. Then I did not get the error but I did not get the flat field image either. All I got was the original image indicating that it was in a group of two but the second image was not there. Tried synchronize but no image was indicated.as available. Processing did not hang and indicated that it went to completion. Must be a problem with 4.2 as it worked with 4.1. With 4.1 I got no grouping, just a new file with "ff" appended to the name.
Asside: I am using a shift adapter with a E-M5 and 28mm OM legacy lens. I shoot three images for a pano, then set the shift back to starting point and shoot three flat field image. Problem (not Adobe's fault) it that I often forget to shoot the flat fliel images. Break down to move on and then realize - Oh Crap! When I remember and using 4.1 it works well.
Larry

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Issue with BDC program used for FBZ5 (Check Print)

Hi all,
I am having one requirement in Check printing. as per that i have made one Z program which will accept multiple Payment documents. I am passing selected accounting documents to BDC routine for Transaction FBZ5. (As in FBZ5 we can take a print for one Payment document not for multiple)
We can have 3 scenarios in FBZ5
1. Fresh Check printing (First time check printing)
2. Old Check (printing for same Check no)
3. New Check (After voiding older check)
Category 1 and 2 are working fine but i am facing problem in category 3.
For Category 3 : BDC Screen flow is like this
A. Tcode FBZ5 Start program: SAPMFCHK Screen: 750 --> Click on 'Print'
B. Program: SAPLSPO2 Screen: 0100 --> Here specify option 'New Check'
C. Program: SAPMFCHK Screen: 0700
    - This program belongs to new Tcode FCH7
    - Here we have to give Void Reason code
Now issue with Category 3:
While executing BDC in online and background mode my control is terminating at step C mentioned above
Troubleshooting:
I have debugged standard program of FBZ5
1. in Include MFCHKFD0 we can see call to Tcode FCH7 (PERFORM AUFRUF_FCH7.)
2. in form AUFRUF_FCH7 i found code related to BDC
   also there one statement is getting triggered -->   CALL TRANSACTION 'FCH7' USING BDC MODE 'A'.
So there is a BDC call inside my Z BDC program, so is this a reason why my program is not working for above scenario ?
Or can't we handle above scenario in a way mentioned above?

Hi Sandra,
I was trying to upload customer master in fd01 using bdc. The screens were different while recording. So could not perform the upload. Thenone screen was skipped so that the bdc was working fine and the data was uploaded.
This is the flow of the recording.
'SAPMF02D' '0105'.
SAPMF02D' '7105'
SAPMF02D' '0111
SAPMF02D' '0120
SAPMF02D' '0130
SAPMF02D' '0210
SAPMF02D' '0215
SAPMF02D' '0220'
SAPMF02D' '0230'
SAPMF02D' '0610
After the second screen was deleted the bdc worked fine.

Issue with BDC processing of F-65 after upgrade to ECC 6.0

Similar Messages

Maybe you are looking for