Issue with binary attribute types through Directory Proxy Server 6.3.1

I'm having problems with DPS 6.3.1.1 on Solaris 10 with binary attribute types. From most LDAP servers, requesting an attribute such as userCertificate would return userCertificate;binary without any issues. However, DPS seems to consider these two separate attributes. In order to see userCertificate;binary, I have to ask for it in that exact format. This obviously is causing trouble for many clients as they shouldn't care about the binary type as it's the same attribute.
I've tried to correct this with a virtual data transformation (dpconf add-virtual-transformation 'PKI Tree' read add-attr-value userCertificate \${userCertificate\;binary}) but the end results are the same. Any ideas on how I can correct this one?
Thanks in advance.

Here is some complementary information:
system (uname -a):
SunOS xxx 5.10 Generic_142900-13 sun4u sparc SUNW,Sun-Fire-V440
since patch 118666-26: update java 1.5.0 update 24
we are experiencing the follwing problem:
xxx$ ./dpadm start /opt/ldap/instances/mail/
The Directory Proxy Server instance '/opt/ldap/instances/mail' failed to start after the waiting period.
The Directory Proxy Server instance start has produced the following error output:
Exception in thread "main" java.lang.NoSuchFieldError: strm
at java.util.zip.Inflater.initIDs(Native Method)
at java.util.zip.Inflater.<clinit>(Inflater.java:60)
at java.util.zip.ZipFile.getInflater(ZipFile.java:375)
at java.util.zip.ZipFile.getInputStream(ZipFile.java:320)
at java.util.zip.ZipFile.getInputStream(ZipFile.java:286)
at java.util.jar.JarFile.hasClassPathAttribute(JarFile.java:469)
at java.util.jar.JavaUtilJarAccessImpl.jarFileHasClassPathAttribute(JavaUtilJarAccessImpl.java:21)
at sun.misc.URLClassPath$JarLoader.getClassPath(URLClassPath.java:809)
at sun.misc.URLClassPath.getLoader(URLClassPath.java:293)
at sun.misc.URLClassPath.getResource(URLClassPath.java:160)
at java.net.URLClassLoader$1.run(URLClassLoader.java:192)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:300)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
The Directory Proxy Server instance '/opt/ldap/instances/mail' is not running.
We have tried to install patch 118666-27 (not recommended, but already available) which includes jdk 1.5.0 update 25 -> same problem
When returning to jdk 1.5.0 update 20 the directory proxy server starts as normal

Similar Messages

Issue With Sales Document Type in BW.

Dear Experts,
I am facing an Issue with Sales Document Type(Object name is 0DOC_TYPE).
when i am loading data from R/3 to BW It is converting Sales Document type as follow
Sales Document Type in R/3                         Sales Document Type in BW
OR                                                                        TA
CR                                                                        G2
DR                                                                        L2
I check with an ABAPer and he told that there is conversion exit for this Object so that's why it is converting when sending to BW. But the user wants to see in Report same as it is in R/3 like OR, CR DR ... etc.
I have done some investigation and found that the conversion exit (CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) are converting the values based in the table TAUUM
The staructure of TAUUM is
MANDT(Client) SPRAS(Language) AUART(Sales document type (not converted)   AUART_SPR(Language key for sales document type)
and values are
100 E TA OR
100 E G2 CR
etc....
The same Conversion exits(CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) and table TAUUM are available in BW as well. So i thought I can Use InfoObject 0DOC_TYPE by changing it's conversion Routine as AUART(which runs based on the above mentioned conversion exits).
but the the problem is table TAUUM(Pool Table) does't have any data in BW.
So can anyone tell me is there any option to load data into table TAUUM from R/3 or any other option to solve this issue.
Your ideas will really help's me.
Thanks in advance,
Dara.

Hi Venkat,
Thanks a lot for your immediate response.
The InfoObject 0DOC_TYPE was without conversion exit by default. but when data coming from R/3 it is converting and sending to BW So that's why i am planning to use conversion exit "AUART" in the info Object.
I checked data in R/3 using RSA3 it is showing sales document type as "OR" and for the same transaction data when i checked in PSA it is showing as "TA".
Could you please let me know if there any other options.
Thanks in advance,
Dara.

Problem in installing Directory Proxy server

Hi all! Recently downloaded the trial version of sun one directory proxy server. After installing the sun one DS 5.2 . I tried to install sun one proxy server..when it asks for configuration server information i have given the admin id and password ....
but it gave me following error message
"The given Administrator Id/password combination was not accepted by the
Configuration Directory Server.
The Sun ONE configuration directory administrator is the ID typically used to
log in to the console."
I did used the same id and password to login to console & i am able to log in.
Please advice.

Two quick hints.
First off, instead of hitting <Enter> to accept the default for the username [admin], type "admin" (without the quotes) as if you were giving different credentials. There's a known issue during the installation where the default text doesn't work.
Additionally, I had to change my admin password in the configuration directory to cleartext in order to get it to work. For some reason the password encryption during the bind was never successful. To do that:
dn: uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot
changetype: modify
replace: userPassword
userPassword: {CLEAR}password
I have no idea if this addresses the problem itself or just a symptom, but it did allow me to install DPS. You might want to give it a shot.

Question on Sun Directory Proxy Server 5.2.4

Hello Guys,
Is it a good idea to have DPS and DS on the same server? Did anyone run into any issues? We have four Sun DS servers four-way master replicated on Windows 2003 std. We are in the process of evaluating Sun Directory Proxy server to resolve single point of failure between our custom apps and LDAP servers. I would appreciate any insights on Sun DPS implementation on Windows 2003 Std.
Thanks

While it might not be too good an idea (you essentially want the DPS for load balancing AND failover, right? So why risk putting it on the same machine ;) ), it does work.
I recently implemented DPS on Solaris, and things generally work fine. (The command line interface isn't too reliable though). If you are thinking of routing all your traffic over SSL (ie, Client---ssl--->DPS---ssl--->DS), make sure you apply the latest patch available for the DPS. The dps524.jar that comes with the default installer isn't what it used to be (JES 2005Q4), and will give you issues when configuring SSL for DPS. Apart from that, things are more or less a breeze.

Directory Proxy Server Public API

Where to find Directory Proxy Server (6 or 7) public API?
Thank you

Well, DPS is mainly a LDAP proxy, so upon reception of a bind, it will forward it to a LDAP directory server that would compare the credentials with the standard userPassword attribute.
DPS can be also used OOTB as a Virtual Directory to provide a LDAP view of non-LDAP data, e.g a SQL database: In that case, DPS implements natively the bind operation, that is, it retrieve the user password from the SQL db, then compare
it with the credentials provided by the client. In that case, the user password can be retrieved from any SQL column.
So to achieve this with a LDAP backend, a DPS bind plugin would have to get the user password from the target LDAP entry and do the comparison. A secured channel between DPS and the backend would be required to exchange such sensitive pieces of information. Technically, this would work only if you plan to use LDAP for authentication only (bind only), because the backend LDAP directory server would not consider user entries w/o userPassword attribute as regular accounts (with associated access rights).
Could you explain where you requirement comes from?
Thanks
-Sylvain

Mobile me/icloud find my iphone through a proxy server?

Hi All,
I'm not sure if this is the right place to post this so if it's not please let me know where is best.
I have a fleet of 600 ipads who are forced to run through a proxy server via a 3g connection. Up untill last week I could trace all these iPads via mobile me or icloud and use the find my iPhone feature. In this last week I seem to have lost this ability. All iPads are coming up with "no location". Mixture of iOS5 and variations of iOS4
If I turn off the proxy on the iPad I can trace the iPad.
me.com, apple.com amd icloud.com are all allowed through the proxy.
I cannot see anoy other banned traffic with a web address I can unblock.
I really just need to know what else I need to allow out via the proxy to get this working again? I'm guessing something has changed in Apple world as the proxy hasn't changed.
Thanks

Hi - did you have any luck with this? I have a similar problem, but only on a private APN through our proxy. I've managed to allow all the URLs to get the iCloud account registered for each device via the APN/proxy, but they do not appear on my icloud.com device view. If I remove the APN, therefore our network proxy is not used, it works fine.
Thanks

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

Does directory proxy server 6.0 support access to ds5.1SP3

Hi,
Does anyone have experience with setting up a directory proxy server 6.0 as a frontend to directory server 5.1SP3 servers ?
(where can I find a list of supported directory servers by the proxy ?)
I would like to use the proxy as part of the migration to a new data centre.
Thanks

Yes Directory Proxy Server 6.0 works with DS 5.1SP3.
DPS uses LDAPv3 protocol and works with most of the LDAPv3 compliant servers. It has been tested with Sun DS, Active Directory, OpenLDAP and OpenDS.
Some specific feature may require the support of the Proxied Authorization Control (RFC 3829), but that's it.
Regards,
Ludovic.

ODSEE 11g - DPS Directory proxy server suddenly increase load average

Hi all
Recently upgraded from directory server 5.2 to ODSEE 11g, one directory proxy configure to one master directory server and one consumer directory server.
all the three instances are in the same sparc t3 machine.
Directory proxy server alerts server load average on the machine is above 6.00 normally it is 0.66. I'm not sure what is causing the sudden burst in the load ? the traffic is normal there is no abnormal requests coming to the server. proxy performance degrades over the span of 24 hours ....and Once i restart the proxy services (dpsadm restart) all load averages comes to normal and directory proxy runs normal for the next two - three weeks. The same cycle continues ...I'm not sure what was causing the sudden load increase.
I increased the JVM heap size from 1GB to 2 GB still continue to have the problem ..did anyone else experience similar problem. How did you fix it....
Any input or advise in the right direction is much appreciated.
Thank you.

server load I'm referring to "prstat command" - server load average suddenly shoot up from 0.66 to 6.00 ie) the CPU usage. Alert is from our server monitoring tool not related to directory proxy.
Clients report connections time out (etime goes from etime=0 ..2..4.....) over 24 hours i can see the etime increases and eventually the proxy server get hung and non responsive. Once I restart all the performance back to normal at-least for another two weeks.
I suspect there might be a memory leak or JVM Garbage collection issue -- any expert input how to figure this out will help.
Here is the JVM args in the proxy server "Xms2g -Xmx2g -Xmn1g -XX:SurvivorRatio=4 -XX:+UseParNewGC -XX:+UseConcMarkSweepGC"
Here is a jstat during the problem
./jstat -gcutil -t 25365 2s 30
Timestamp S0 S1 E O P YGC YGCT FGC FGCT GCT
982106.4 0.00 26.17 4.26 92.25 59.52 523 60.979 689 1002.587 1063.566
982108.4 0.00 26.17 4.40 92.25 59.52 523 60.979 689 1002.587 1063.566
982110.4 0.00 26.17 4.80 92.25 59.52 523 60.979 689 1002.587 1063.566
982112.4 0.00 26.17 5.10 92.25 59.52 523 60.979 690 1002.719 1063.698
982114.4 0.00 26.17 5.15 92.25 59.52 523 60.979 690 1002.719 1063.698
982116.4 0.00 26.17 5.32 92.25 59.52 523 60.979 691 1003.009 1063.988
982118.4 0.00 26.17 5.72 92.25 59.52 523 60.979 691 1003.009 1063.988
982120.4 0.00 26.17 5.80 92.25 59.52 523 60.979 691 1003.009 1063.988
982122.4 0.00 26.17 5.93 92.25 59.52 523 60.979 692 1003.168 1064.146
982124.4 0.00 26.17 6.03 92.25 59.52 523 60.979 692 1003.168 1064.146
982126.4 0.00 26.17 6.15 92.25 59.52 523 60.979 693 1003.481 1064.460
982128.5 0.00 26.17 6.18 92.25 59.52 523 60.979 693 1003.481 1064.460
982130.5 0.00 26.17 6.25 92.25 59.52 523 60.979 693 1003.481 1064.460
982132.5 0.00 26.17 6.29 92.25 59.52 523 60.979 694 1003.656 1064.635
982134.5 0.00 26.17 6.31 92.25 59.52 523 60.979 694 1003.656 1064.635
982136.5 0.00 26.17 6.36 92.25 59.52 523 60.979 695 1003.988 1064.967
982138.5 0.00 26.17 6.89 92.25 59.52 523 60.979 695 1003.988 1064.967
982140.5 0.00 26.17 6.99 92.25 59.52 523 60.979 695 1003.988 1064.967
982142.5 0.00 26.17 7.08 92.25 59.52 523 60.979 696 1004.187 1065.165
982144.5 0.00 26.17 7.31 92.25 59.52 523 60.979 696 1004.187 1065.165
982146.5 0.00 26.17 7.82 92.25 59.52 523 60.979 697 1004.553 1065.531
982148.5 0.00 26.17 7.92 92.25 59.52 523 60.979 697 1004.553 1065.531
982150.5 0.00 26.17 8.01 92.25 59.52 523 60.979 697 1004.553 1065.531
982152.5 0.00 26.17 8.17 92.25 59.52 523 60.979 698 1004.786 1065.764
982154.5 0.00 26.17 8.26 92.25 59.52 523 60.979 698 1004.786 1065.764
982156.5 0.00 26.17 8.38 92.25 59.52 523 60.979 699 1005.174 1066.153
982158.5 0.00 26.17 8.74 92.25 59.52 523 60.979 699 1005.174 1066.153
982160.5 0.00 26.17 8.88 92.25 59.52 523 60.979 699 1005.174 1066.153
982162.5 0.00 26.17 8.96 92.25 59.52 523 60.979 700 1005.433 1066.412
982164.5 0.00 26.17 9.09 92.25 59.52 523 60.979 700 1005.433 1066.412
jstat after the restart
./jstat -gcutil -t 10084 2s 30
Timestamp S0 S1 E O P YGC YGCT FGC FGCT GCT
40312.6 0.00 25.13 88.49 1.98 63.68 21 2.366 0 0.000 2.366
40314.6 0.00 25.13 88.58 1.98 63.68 21 2.366 0 0.000 2.366
40316.6 0.00 25.13 88.71 1.98 63.68 21 2.366 0 0.000 2.366
40318.6 0.00 25.13 88.99 1.98 63.68 21 2.366 0 0.000 2.366
40320.6 0.00 25.13 89.31 1.98 63.68 21 2.366 0 0.000 2.366
40322.6 0.00 25.13 89.36 1.98 63.68 21 2.366 0 0.000 2.366
40324.6 0.00 25.13 89.42 1.98 63.68 21 2.366 0 0.000 2.366
40326.6 0.00 25.13 89.53 1.98 63.68 21 2.366 0 0.000 2.366
40328.6 0.00 25.13 89.60 1.98 63.68 21 2.366 0 0.000 2.366
40330.6 0.00 25.13 89.72 1.98 63.68 21 2.366 0 0.000 2.366
40332.6 0.00 25.13 90.11 1.98 63.68 21 2.366 0 0.000 2.366
40334.6 0.00 25.13 90.56 1.98 63.68 21 2.366 0 0.000 2.366
40336.6 0.00 25.13 90.67 1.98 63.68 21 2.366 0 0.000 2.366
40338.6 0.00 25.13 90.75 1.98 63.68 21 2.366 0 0.000 2.366
40340.6 0.00 25.13 91.09 1.98 63.68 21 2.366 0 0.000 2.366
40342.6 0.00 25.13 91.36 1.98 63.68 21 2.366 0 0.000 2.366
40344.6 0.00 25.13 91.47 1.98 63.68 21 2.366 0 0.000 2.366
40346.6 0.00 25.13 91.53 1.98 63.68 21 2.366 0 0.000 2.366
40348.7 0.00 25.13 91.64 1.98 63.68 21 2.366 0 0.000 2.366
40350.7 0.00 25.13 91.77 1.98 63.68 21 2.366 0 0.000 2.366
40352.7 0.00 25.13 91.87 1.98 63.68 21 2.366 0 0.000 2.366
40354.7 0.00 25.13 91.95 1.98 63.68 21 2.366 0 0.000 2.366
40356.7 0.00 25.13 92.11 1.98 63.68 21 2.366 0 0.000 2.366
40358.7 0.00 25.13 92.19 1.98 63.68 21 2.366 0 0.000 2.366
40360.7 0.00 25.13 92.24 1.98 63.68 21 2.366 0 0.000 2.366
40362.7 0.00 25.13 92.85 1.98 63.68 21 2.366 0 0.000 2.366
40364.7 0.00 25.13 93.19 1.98 63.68 21 2.366 0 0.000 2.366
40366.7 0.00 25.13 93.40 1.98 63.68 21 2.366 0 0.000 2.366
40368.7 0.00 25.13 93.44 1.98 63.68 21 2.366 0 0.000 2.366
40370.7 0.00 25.13 93.47 1.98 63.68 21 2.366 0 0.000 2.366
Any one else had similar behavior. Any input to the right direction is highly appreciated.
Thanks.

Installing Sunone Directory Proxy server

Hi all! I am in the process of installing sunone directory proxy server. also in the same machine i have directory server and administration server.
For some reason directory poxy installation fails at the end.
look at the log file all i can see is
Admin Server refused to disclose its pid!
can any one had this experience or share some thoughts.
Thanks

I'm Using standalone DPS installer. Here is what i see in installation log
[5] stdout> executing dps52cfgUninstall::main
[5] stdout> Retry for: /admin-serv/tasks/Operation/Restart?op=getpid
[5] stdout> Retry for: /admin-serv/tasks/Operation/Restart?op=getpid
[5] stdout> Retry for: /admin-serv/tasks/Operation/Restart?op=getpid
[5] stdout> Retry for: /admin-serv/tasks/Operation/Restart?op=getpid
[5] stdout> Retry for: /admin-serv/tasks/Operation/Restart?op=getpid
[5] stdout> Retry for: /admin-serv/tasks/Operation/Restart?op=getpid

Tuning directory proxy server parameters

I need help to tune following parameters of Directory proxy server 5.2patch4.
simultaneous operations per connection
Total operations per connection
Simultaneous connections to this group
simultaneous connections per ip address.
Before tuning these parameters, I wanted to know how can I find current usage of above parameters from directory server/directory proxy server. Right now there is no value set for these parameters.
Is there any tool/command line utility or any other way to find current usage of these parameters?
Any help will be appreciated. Thanks in advance.
Thanks
-Ashok

I think the default is unlimited. You can use these
params to tune your server.Thanks for response.
How do I know the baseline to set these parameters? What tool/utility can I use on Proxy server/Directory server in order to find the baseline for these parameters.
To make it more clear, how can I find from proxy server/DS server that how many currently simultaneous operations per connection are going on..
how many total operations per connection are running..
how many simultaneous connections to this group are running.
how may simutaneous connections per ip address are running.
Please let me know if you need further info.
Thanks again.

SUN ONE Directory proxy Server on NT Server

I want to use the sun one directory proxy server on a NT Server as a LDAP Proxy Server to my customised database running on an AIX box. During the installation of the proxy server (called idar 5.0 SP1) it fails indicating that the "the server configuration directory may not be running".
IWhat am i missing? Is the ldap proxy server dependent on SUN's directory server.

Hi,
u need to have a Directory Server for the installation of the Directory Proxy Server, but not essentially the Sun ONE Directory Server itself.
regards,
raj

Issue with binary submission

I have upgraded our app using Viewer Builder 1.5 and submitted the app to Apple. I have received this message from the iTunes Store:
Dear Developer,
We have discovered one or more issues with your recent binary submission for "[app name]". Before your app can be reviewed, the following issues must be corrected:
Invalid Code Signing Entitlements - The signature for your app bundle contains entitlement values that are not supported. For the com.apple.developer.ubiquity-container-identifiers entitlement, the first value in the array must consist of the prefix provided by Apple in the provisioning profile followed by a bundle identifier suffix. The bundle identifier must match the bundle identifier for one of your apps or another app that you are permitted to use as the iCloud container identifier.
Specifically, value "EH4Y8L86T7.*" for key "com.apple.developer.ubiquity-container-identifiers" in viewer is not supported.
Invalid Code Signing Entitlements - The signature for your app bundle contains entitlement values that are not supported.
Specifically, value "EH4Y8L86T7.*" for key "com.apple.developer.ubiquity-kvstore-identifier" in viewer is not supported.
Once these issues have been corrected, go to the Version Details page and click Ready to Upload Binary. Continue through the submission process until the app status is Waiting for Upload and then use Application Loader to upload the corrected binary.
Regards,
The iTunes Store Team
Do you know what this means? Did I do anything wrong?
On Apple's iOS Provisioning Portal, under App IDs there is an option to enable iCloud. Should I have not enabled that?
Thanks,
Mike

You should not enable the iCloud option. The Viewer Builder now creates viewers that store folios in the caches directory, not the Documents directory. Files cannot be backed up from the caches directory, so Apple rejected the app. Re-configure your App ID with iCloud deselected and re-create your mobileprovision files -- you should be able to use your same p12 certificates -- and then submit the app again.
For what it's worth, I accidentally submitted one app with iCloud turned on and one with it turned off, and Apple approved both.

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

Issue with URL attribute in Header

Hi,
I am facing an issue with the URL attribute.
I have created an header attribute #HDR_TEST_URL and selected the type as URL.
Given a default value as http://www.google.com as the url
Associated this attribute to the Notification message.
But in the notification, the URL is being shown as the plain text not as a link.
Can you please let me know what I am missing here.
Thanks

Please check the notification format if it is text then it might not be shown as a url but if it is HTML it might show up, if it is not showing then i would recommend using the anchor tag to create the Hyperlink.
Regards,
Varun

Issue with binary attribute types through Directory Proxy Server 6.3.1

Similar Messages

Maybe you are looking for