Issue with Bouncing Tracks

I have an issue about 50% of the time I bounce a project to a wave file. When I play the wave file it often has glitches in some of the track data. For example, the lead vocal will jitter in and out for a second.
The problem is not consistent. It does not happen at the same time or location in any given song.
Does anyone know what is causing this?
Thanks!

I might have the solution for you but first I need to know, do you have, fade in, fade out setting on your vocal tracks? (You know, you set it to the left of the screen in the arrange page, its non-destructive)

Similar Messages

ITunes having issues with specific tracks.

Specific tracks are giving me problems. That is to say when I try to play that specific song iTunes will pinwheel for 20~30 seconds (or crash) and if it does play the song will stutter. When I'm syncing my iPod and it gets to these tracks iTunes will again pinwheel for a while and then tell me that my iPod cannot be read from/written too. I've tried removing iTunes and reinstalling as well as removing the Library.xml file to no luck (however removing the library file changed which songs are giving me issues). The songs are seemingly random, some are in the middle of albums or songs I purchased off itunes store, no real pattern there. Also it was doing this under 10.5.8 and now still with 10.6. Its all very strange and I'm out of ideas.

Are the videos the right kind of files to play in itunes? If not they need to be converted.
Not sure if I am allowed to mention the software needed to convert so you may have to use google to find that.

Odd issue with message tracking. (User's emails show as SUBMIT and not SEND. No Byte Size) Exchange 2010

Hi everybody.
I had been tasked with tracking down a user's emails.
I ran a script in powershell to export data I could work with.
For some reason this particular user's emails in this time range do not show up as the EVENTID "SEND".
They also do not have a Byte Count nor a list of recipients.
They only seem to show up as "SUBMIT"
Apparently this user has been sending out emails with a large amount of BCCs.
Is there any way to actually see this activity? Why would it be showing up as SUBMIT and not SEND? Why won't it show any recipients or byte count?
Here is my example script.
Get-MessageTrackingLog -ResultSize Unlimited -Server "contoso-ex1" -Start "5/1/2014 12:01:00 AM" -End "5/8/2014 6:40:00 PM" | Select Sender,{$_.Recipients},{$_.RecipientStatus},MessageSubject,TimeStamp, EventId, Source,SourceContext,MessageId,InternalMessageId,ClientIP,ClientHostName,ServerIP,ServerHostName,ConnectorId,TotalBytes,RecipientCount,RelatedRecipientAddress,Reference,ReturnPath,MessageInfo
| Export-Csv .\MessageTrackingLog.csv
Please note that only this one user's emails are showing only as SUBMIT. The rest are mostly SEND.
MCSE 2003, Exchange. MCTS Vista, 7. Administrator of awful, neglected website http://timssims.net

Hi,
I’d like to double confirm the question: This issue occurred only on one specific user in a particular time range.
In other time, the message tracking shows correctly information for this user.
I suggest we check the application log during that time range and see whether there are any related event IDs about this user.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Import Issue with "Duets" tracks

When importing a cd, any track that is 'duets' imports as a separate album instead of being listed with all other tracks. How do I correct this? I've put playlists together to keep all tracks together but there must be a better way (I hope). I'm using a Nano 6th Gen and iTunes is current.

Hello Gayle416
You will need to edit the track information to make the album part of a compilation. The article below will assist you with that process.
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/ts1468
Regards,
-Norm G.

Is there an issue with incorrect tracking of data usage?

I just upgraded from a 4gig shared plan to 6. I never went over the previous plan, but now that I have more data, I've gone over. There is no difference in how we are using our phones, and when I look at the data usage for each phone on the plan (there are 4, all different phones) the times don't make sense - in some cases it appears that data is being used in the early morning hours when we are sleeping. In other cases, the are duplicate entries for the same dates and times. What the hell is going on? I don't even dare try to call Verizon customer service b/c I know I'll be on the phone with them for hours with no resolution or explanation that makes sens to me (it makes perfect sense to them, however). Anyone else experienced this?

Although I am not a conspiracy theorist I am reading more and more on the web that ever sense the Unlimited data went to shared or metered data, people that never exceeded data use previously are now seeing high overages. Of course Verizon will tell you nothing is wrong and it is all your problem. I can remember the old days when people were seeing phamton charges of data use at 99 cents and in the lawsuit that followed Verizon admitted it was an error. They made millions on that error but the class action settlement was peanuts. They still made millions even after admitting the practice.
I personally do not believe that the data counters are 100% accurate. Amazing that people on unlimited that used a few gigs of data if that n ow complain of excessive data over 3, 4, and 8 GB and up. Yeah the phones that were not using a whole lot of data before are suddenly data hogs. again I am sure there is a logical reason for the data jumps.
And no lets not just blame the users, or the device brand this situation is happening across all brand lines. Some more than others such as iPhone's but again this is all about the money.
And don't fall for the Verizon now has plans with double data for the same price, it is a ploy to garner more business. They see this as their answer to the Sprint & T-Mobile and now AT&T plans being offered.
You see with 99% cellular penetration Verizon and other providers have to do anything they can to get and keep customers.
It is big business. You must expect they have ways to generate as much money out of you they can.
Good Luck

Possible issue with dependency tracking?

I was just thinning out my herd of packages and decided to remove the gnome package group.
I noticed that I couldn't remove control-center because it's required by compiz-git.
Edited the compiz-git PKGBUILD (DaNiMoTh's one from AUR)
to remove the gnome dependency and took control-center out of the 'depends,' array.
I then made and installed the modified package, but 'pacman -Qi control-center,' still showed
compiz-git in the 'Required By' field even though the new package no longer had the dependency.
Seems that if a package stops being a dependency the change isn't reflected in pacman.
I could just Pacman -Rd, but it feels messy in this situation, and I don't think it's the right approach.
Any thoughts on this?

It's a bug in pacman, fixed there:
http://projects.archlinux.org/git/?p=pa … fb891b9f4c

I am facing issue with the new iOS 7 control center; where I am not able to stop Music or go to next track from this shortcut center. Any Solution or Settings ?

Hi,
I have upgraded my iphone 5 to new iOS7 where I see that we have a new shorcut feature Control Center to turn on Wifi, Blutooth, Air Play etc..In the same we have for MUSIC where I am not able to pause or stop music and also cant go to next track and issue withe those buttons.
Please let me know any seetings needs to changed.
Thanks
Niranjan

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

I have a sync issue with any songs name track 1 or 2 so on ..even though my itune shows I have the play list right but after i sync the same 20 tracks play very different tracks, it doesn't happen when I sync other songs that actually have names

I have a sync issue with my ipod, anytime I synch a playlist that has generic song names instead of actual names like track 1 or track 2 so on even though my itune library shows and plays the song, but after a sync my ipod will play a different song. Never happnes if the playlist has actual song names, than everything is fine..!!!!Any help?

If I understand you correctly, when iPod play the Track 1, a different song is played, what is the name of this different song?

Premiere Elements 7 issue with track 1

I just recently switched to premier elements 7. When I first switched it was fine, but now when I bring video into the timeline it always creates new Tracks and will not allow me to put it into Track 1. No idea why this is happening and it's not the end of the world, except when things are put in automatically they are put onto Track 1, and I can't even move my video from Track 2 to Track 1. My computer is Vista home premium. Any help would be appreciated!

Hmm. I see that this is a dual-format cam that will also record in MPEG2.
How are you getting this MPEG into your computer? Are you using Premiere Elements' Media Downloader to pull it off your hard drive?
Also, for this video you should be using the project preset for hard drive or DVD camcorders.
I'm not an expert on these dual-format camcorders, so there could be an issue with it using 5.1 audio, if it is for those MPEG. That could lead to the problems you're describing.

Logic issue with MS Band Sleep Tracking

If I do a both ends of the candle night, so hit the sack at 2am on the 10th of the month, then try to make amends that night by turning in at 10pm then the Band tracker records this as no sleep at all on the 9th, but 2 sleeps on the 10th. Well that just
nonsense. The logic isn't hard and I can guarantee the dev team understand. So this is BUG and it would be rather nice to see it fixed before Azure ML gets confused about my sleep patterns and predicts my early demise.

I have had the exact same problems, only I have not cycled so I can't relate to that complaint. I have had an issue with my units of Distance now displaying incorrectly. Prior to last week, my units were in Miles, and now they are in Kilometers. I don't see anywhere to change that in the Settings.
Also, I contacted Joe in Support yesterday, and he had me reset my SmartBand and my phone (equivalent of rebooting) to see if that fixed anything. It did not. Then he instructed me to uninstall the Sony Apps on my phone, and re-install them. I did that, and it worked temporarily. All my historical data was now displaying correctly, until this morning when I woke up, and my sleep is back to being > 100 hours for last night, but my historical data still seems to be fine. The problem seems to be during the initial capture of the data. When I am on my timeline and I move the time forward, at midnight, the increments increase exponentially, rather than normal speed. Prior to midnight, all is fine.
I have a Nike+ Fuel Band and got the Sony SWR10 primarily for Sleep Monitoring. Now I am unable to do anything with the data because it is not accurate. Also, I'm an avid runner and would appreciate the ability to change from KM back to Miles...this is a basic necessity.
Thanks,
Chad
Atlanta, GA

Issues with 'Mute' in Audio Track

Hi All
1. Using Premiere Pro CC (Fully Up to Date)
Was wondering if I could get assistance with what I believe is an issue with the Mute Button in an Audio Track. Firstly my understanding is that, if I use the 'Mute' button either in the Audio Mixer or the icon in the Timeline to mute a clip or track, it is only a temporary action and once you uncheck mute the track reverts back to it state before the Mute.ie normal audio. I have been doing some voice overs directly into the timeline using a USB Microphone / Headset and on those occasions have gone through the steps of Arming, Solo (The Voice Over Track) and then record. I am not sure if this is related but just included to give a background. When checking the levels and doing a bit of fine tuning I find the following issue. As the play head moves along the timeline if goes into a Mute condition and also appear in the Audio Mixer as Mute. It is though it is seeing a 'key frame' that tells it to mute at that point, hence my earlier question regarding (when Mute, is it temporary). I immediately uncheck Mute but when I recheck over that area of the video it is On/Off On /Off. I have tried to see if there are 'key frames / markers that indicate start and end of "Mute' in that Audio track but no luck.
Am I correct in the assumption that mute is a temporary action and should not be a permanent action at that point, or have I done something to create this issue.
Thanks for any advise.

I just read some related threads and I am beginning to suspect the action of the 'Solo' function could be causing the issue. I can not say for certain but I did some other VO in another sequence in the same project and only used the 'Mute" in the other tracks, not using Solo didn't seem to have this issue. Then I did a bit of reading in an earlier CS3 manual that advised using 'Solo' now I seem to have this issue. I totally agree have tried different audio, removing area of offending audio but still comes back??????

Applied SP 13 but now have issues with Track deploy

We recently applied SP 13 to NWDI (we were at SP10).
I re-imported my track into NWDS, made a change to code and activated it.
The track was configured to allow auto-deploy to dev runtime.
While the activation resulted in a successful build by CBS (I checked CBS log) the application was not deployed to the dev runtime.
I had no issue with this before applying SP 13.
Any ideas?

Dean,
Go to the Landscape configurator in the CMS (http://<hostname>:<port>/devinf/ ).
Click on the track that is affected and then click on the Runtime Systems tab.
Is the "Disable automatic deployment" checked? If so, uncheck it.
Next, take a look at the build request queue, you may have some entries pending.
http://<hostname>:<port>/TCS/Deployer
HTH!

Bounced tracks play too fast in iTunes

This is a continuation of an old thread that was never resolved:
http://discussions.apple.com/thread.jspa?threadID=853393
Basically, nothing has changed. I can bounce my tracks from Logic, and they play fine everywhere except iTunes, where they play too fast. I can play them on my iPod in the car and everything works at normal speed.
All my iTunes tracks (including the ones bounced from Logic) share the following characteristics:
192 kbps
44.1 kHz
Profile: Low Complexity
However, the Logic tracks play fast, whereas everything else plays normally.
I have a standard G5 sound card, not a 3rd party one.
I'm about to conclude that this is a standard limitation with Logic, that tracks created there cannot be listened to at regular speed in iTunes. Is that a known issue? Is this limitation by design?

Sorry for the slow reply. Yes, that is the problem I'm having, and it's so weird, I thought maybe there was some wacky glitch in the program. Logic is not without its bizarre idiosyncrasies, as you've probably noticed yourself.
Check this out for bizarre: I've bounced these tunes down to my iPod, where I can listen to them over headphones, in my car, etc, with the tracks playing at the right speed. However, if I plug that same ipod into my home stereo in the living room (where the laptop is also plugged in), and play those same tracks, they play too fast. I know, it doesn't make sense. But I'm not imagining it. It's completely crazy.
In Audio Midi Setup my audio output is set for 44.1khz.
Anyhow, the problem is less consistent these days. That is, sometimes I can bounce a track down and it plays right. Othertimes, not. I still haven't found the common denominator to this problem, but if I discover anything, I'll post it here.

Running rewire w/ reason + bouncing tracks

when logic is running as the master and reason running as the slave. I bounce the track in logic, but all my automation that i programmed in reason is not transfered...is this normal?

Are you bouncing in realtime or offline. I know there are some issues with automation when bouncing offline.
If you aven't tried it already, try bouncing in realtime.
Also check that the automation overide isn't punched in on reasons transport bar if it is try pushing the reset button.

Pre-n enabler seems to cause issues with lock up/beach ball

I just received my new C2D MBP yesterday with 3G of RAM and all was peachy. I decided to install the $1.99 Pre-N enabler patch from Apple and it appears that I'm not alone in having that cause system lock ups and beach balls from ****.
I unfortunately seem to be in the same boat. It runs for awhile and then all of a sudden it will just lock up and I'll get the spinning beach ball from **** forever, until I reboot.
I'm using mine with a NetGear Pre-N wireless router and while I'm getting 140kpbs connections I am getting a lot of receive errors and the machine just goes off to la-la land.
I was worried about something else until I read these posts over in Internet & Networking and now I'm wondering if there really is an issue with whatever the "enabler" did. It ceratinly appears to be this. Nothing else seems to cause it this kind of beach ball death.
So now I guess we need to look for an "un-enabler" patch. Just out of curiosity where do we email problems like this to get resolved?
UGGHHHHHHH!!!
Peter

I have this same problem. I reported a bug to apple bug id#4990056
Here is what i wrote:
10-Feb-2007 10:36 PM Brooks Roy:
Summary:
I recently got a Linksys WRT350N 802.11n router and using it with my macbook pro core 2 duo. The router is firmware version 1.03.2.
After installing the enabler from the apple site i verified it upgraded properly and it shows a/b/g/n for my airport card. However the computer has been locking up more and more. I finally narrowed it down to the airport card. Here is what happens:
Steps to Reproduce:
With regular airport usage, the mac will all of the sudden give the spinning 'beach ball' and just sit there. A simple http download will stop and the mac will become unresponsive. I cannot launch new applications. The icons will bounce in the dock but never open. I cannot force-quit any applications. My only option is to hold down the power button for a hard shutdown.
I can almost duplicate the issue 7 times out of 10. Sometimes it takes 15 minutes or so before it locks up, sometimes its almost immediately.
I have done a full fsck and permissions. I also downloaded tiger cache cleaner and cleaned all settings. I have also booted off the apple install cd and done a extended full RAM check on the 2Gb installed in my computer.
I have restored my IO80211Family.kext from my other macbook pro (regular core duo) and my problems have gone away. I am 100% sure there is a bug with the 802.11n enabler and the Linksys WRT350N.
I do not have any special configuration on my linksys, just MAC based wireless authentication.
When using the MacBook pro on the WRT350N in 802.11g without the latest 802.11n enabler the mac performs fine and does not become unresponsive.
Expected Results:
I expect the mac to perform just as a 802.11g network will work with increased transfer speeds.
Actual Results:
See above.
Regression:
It only occurs when using network traffic (i.e Mail.app, Safari browsing sites, etc. Any application that requires Airport.
Notes:
I am using the original IO80211Family.kext driver that does not have 802.11n support and it works properly. Also using builtin ethernet with airport off and the 802.11n driver works (obviously).

Issue with Bouncing Tracks

Similar Messages

Maybe you are looking for