Issue with Bulk Load Post Process
Hi,
I ran bulk load command line utility to create users in OIM. I had 5 records in my csv file. Out of which 2 users were successfully created in OIM and for rest i got exception because users already existed. After that if i run bulk load post process for LDAP sync and generate the password and send notification. It is not working even for successfully created users. Ideally it should sync successfully created users. However if there is no exception i during bulk load command line utility then LDAP sync work fine through bulk load post process.Any idea how to resolve this issue and sync the user in OID which were successfully created. Urgent help would be appreciated.
The scheduled task carries out post-processing activities on the users imported through the bulk load utility.
Similar Messages
-
Issue with Bulk Load Post Process Scheduled Task
Hello,
I successfully loaded users in OIM using the bulk load utility. I also have LDAP sync ON. The documentation says to run the Bulk Load Post Process scheduled task to push the loaded users in OIM into LDAP.
This works if we run the Bulk Load Post Process Scheduled Task right away after the run the bulk load.
If some time had passed and we go back to run the Bulk Load Post Process Scheduled Task, some of the users loaded through the bulk load utility are not created in our LDAP system. This created an off-sync situation between OIM and our LDAP.
I tried to use the usr_key as a parameter to the Bulk Load Post Process Scheduled Task without success.
Is there a way to force the re-evaluation of these users so they would get created in LDAP?
Thanks
KhanhThe scheduled task carries out post-processing activities on the users imported through the bulk load utility.
-
Facing issue in Bulk Load Post Process in case of blank fields in csv file
Hi,
I ran command line bulk utility to create users in OIM through CSV file. I left few columns as blank which were not mandatory. After executing the bulk utility, user got successfully created in OIM but after that when i ran "Bulk Load Post Process" for LDAP sync then it changed the user's organisation to default organisation "Xellerate User" which is a major issue. It is happening only when i am leaving some column blank. Any idea why it is happening and how to resolve this problem? Need some urgent help!!Hi ,
Thanks for your reply, the issue was we can not use DOD=Y due to the dependency of the Standard Version where other program fetches data from the same XML structure,
Any way we resolved this issue by re doing below post installation steps. And used a new schema with updated DTD and point that with the same logical schema.
1) Created a new schema for XML external database
2) Change the DTD file, keep it in the same location
3) Change properties file with new schema name
4) Test with the new schema for XML connection
5) Reverse engineer the BaseModel ITEMBRANCH only (Where we added additional XML Tags)
6) Bounce back ODI agent and Client
Thanks,
Pc -
Retry "Bulk Load Post Process" batch
Hi,
First question, what is the actual use of the scheduled task "Bulk Load Post Process"? If I am not sending out email notification, nor LDAP syncing nor generating the password do I still need to run this task after performing a bulk load through the utility?
Also, I ran this task, now there are some batches which are in the "READY FOR PROCESSING" state. How do I re-run these batches?
Thanks,
VishalThe scheduled task carries out post-processing activities on the users imported through the bulk load utility.
-
OIM 11g - Issue with Bulk Load Utility for Account Data
Hi,
We are trying to load the account data for users in OIM 11g using bulk load utility.
We are trying to load the account data for resource "iPlanet". For testing purpose, we made one account entry in csv file and run the bulk load utility. After the bulk load process completes, we have noticed that resource is provisioned to the user multiple times and multiple entries have been created in process form table.
We have tried to run the utility multiple times with a different user record each time.
The out put of the below sql query:
SELECT MSG FROM OIM_BLKLD_LOG
WHERE MODULE = 'ACCOUNT' AND LOG_LEVEL = 'PROGRESS_MSG'
ORDER BY MSG_SEQ_NO;
is coming as follows:
MSG
Number of Records Loaded: 126
Number of Records Loaded: 252
Number of Records Loaded: 504
Number of Records Loaded: 1008
Number of Records Loaded: 2016
Number of Records Loaded: 4032
We have noticed that each time the number of records loaded is increased to double from the records loaded in last run even when the csv file contains only one record.
Provided below are the parent and child csv file entries.
Parent file:
UD_IPNT_USR_USERID,UD_IPNT_USR_FIRST_NAME,UD_IPNT_USR_LAST_NAME,UD_IPNT_USR_COMMON_NAME,UD_IPNT_USR_NSUNIQUEID
KPETER,Peter,Kevin,Peter Kevin,
Child file 1:
UD_IPNT_USR_USERID,UD_IPNT_GRP_GROUP_NAME
KPETER,group1
Child file 2:
UD_IPNT_USR_USERID,UD_IPNT_ROL_ROLE_NAME
KPETER,role1
Can you please throw some insight on what could be the potential cause for this issue and how it could be resolved?
Thanks
Deepa
Edited by: user10955790 on Jun 25, 2012 6:45 AMHi Deepa,
I know from 'User load' perspective that is required to restart Oracle Identity Manager when we need to reload data that was not loaded during the first run.
So, my suggestion is restart it before reload.
Reference: http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/bulkload.htm#CHDEICEH
I hope this helps,
Thiago Leoncio. -
Please HELP! issue with BULK LOAD in FDM 11.1.2.1
Please assist with a solution to the following error!
See log below
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:39] **
ERROR:
Code............................................. -2147217900
Description...................................... You do not have permission to use the bulk load statement.
BULK INSERT POLFDM..tWkalnic158050364335 FROM N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic158050364335.tmp' WITH (FORMATFILE = N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic158050364335.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=221593,TABLOCK)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:40] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpDataPump.fImportTextFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:40] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:38] **
ERROR:
Code............................................. -2147217900
Description...................................... You do not have permission to use the bulk load statement.
BULK INSERT POLFDM..tWkalnic46564644597 FROM N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic46564644597.tmp' WITH (FORMATFILE = N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic46564644597.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=221593,TABLOCK)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:38] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpDataPump.fImportTextFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:39] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... FalseHave you read the installation documentation? It appears that you did not take the time to do a basic level of troubleshooting. A simple Google search of the error message provides the root problem as well as the solution.
The forums are intended to be used when you have exhausted other options. Please be mindful of this and contributors time when posting further questions.
I have attached a google search result for the error "You do not have permission to use the bulk load statement."
http://www.google.com/#sclient=psy-ab&hl=en&safe=off&site=&source=hp&q=+You+do+not+have+permission+to+use+the+bulk+load+statement.&pbx=1&oq=+You+do+not+have+permission+to+use+the+bulk+load+statement.&aq=f&aqi=g4&aql=&gs_sm=e&gs_upl=1556l1556l0l2633l1l1l0l0l0l0l184l184l0.1l1l0&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&fp=ebaa3ff8b466872e&biw=1920&bih=955 -
ECC 5.0 database instance install error in database load (post processing)
HI all!
The installation of the environment :
VM SERVER v1.03
ECC 5.0 /WINDOWS SERVER 2003
SQL SERVER 2000 SP3
DB INSTANCE install occur error in database load (post processing) step:
sapinst.log:
INFO 2008-10-16 14:20:54
Creating file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\keydb.5.xml.
ERROR 2008-10-16 14:22:29
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.log
ERROR 2008-10-16 14:24:59
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.log
ERROR 2008-10-16 14:24:59
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log
ERROR 2008-10-16 14:26:30
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.log
SAPSSEXC.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142100
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: D010INC deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: EndFastLoad failed with <2: Bulk-copy commit unsuccessful:3624 Location: rowset.cpp:5001
Expression: pBind->FCheckForNull ()
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: D010TAB deleted/truncated
SAPAPPL2.log
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142130
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: AGR_1250 deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: import of AGR_1250 completed (139232 rows) #20081016142200
(DB) INFO: AGR_1251 deleted/truncated
(IMP) INFO: EndFastLoad failed with <2: Bulk-copy commit unsuccessful:2627 Violation of PRIMARY KEY constraint 'AGR_1251~0'. Cannot insert duplicate key in object 'AGR_1251'.
3621 The statement has been terminated.>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: AQLTS deleted/truncated
(IMP) INFO: import of AQLTS completed (17526 rows) #20081016142456
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142456
SAPSDIC.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142230
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: DD08L deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:\sql\ntdbms\storeng\drs\include\record.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142437
SAPPOOL.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142530
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: ATAB deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:\sql\ntdbms\storeng\drs\include\record.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142621
please help! thanks!VM SERVER v1.03
can you please tell me what you mean with that? VMWare? Is that ESX-Server?
(DB) INFO: connected to DB
(DB) INFO: ATAB deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:sql
tdbmsstorengdrsinclude
ecord.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
I´ve seen those load problems under VMWare and on boxes hosted as Xen VMs.
Markus -
Error in Database Load (post processing)
Hi, i have a problem when install the Database Instance. In the step "Database Load (post processing)". Error:
ERROR 2007-01-16 18:33:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:33:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:54
FJS-00012 Error when executing script.
And I want to open the file SAPVIEW.log for check the error, but the file size is 300Mb.
Help me, please.
Jonu00E1300 MB? are u sure? this is way too much imho...as i see you install sqlsrv (= win)...you can find a tail like tool for windows under http://tailforwin32.sourceforge.net ... but somehow i doubt you will succeed to load the file...
-> which sap rlz you're installing?
GreetZ, AH -
Database instance install error in database load (post processing)
hi
i'm facing these errors during the ECC installation the operating system is Windows 2003 server database is oracle 9.2.
Error occured in database load (post processing) step
ERROR 2009-12-19 01:23:50
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPCLUST.log
ERROR 2009-12-19 01:49:20
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log
ERROR 2009-12-19 04:08:20
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.logHi
(RFF) ERROR: invalid checksum in data file "E:/DVD2/EXPORT2/DATA/SAPCLUST.001";
current table was "EDI40"
Your install software is corrupt....
Did you copy the software to disk ? If so did you copy accross in binary mode ...
Mark -
Issue with site load time when exported as HTML. Addressed?
Has the issue with website load time been addressed?
I believe the site attempts to load the entire image content at the initial visit - meaning any galleries with numerous pictures are all included when first getting to the site. This is causing a HUGE increase in load time. I was told when I last brought it up that it was an apparent issue that needed to be addressed.
Any type of resolution coming?
Site for reference: www.dkrecollection.comMajor updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow. -
Database load (post processing)
Hi sap gurus,
I am installing ECC 5.0 database instance . from past 15 hours it is still at database load (post processing). can u please tell me how long it will take to complete whole installation.
thanks
vijayTime it takes to do the database load is highly dependent on your system's CPU, RAM and disk IO.
On a real production type server it could be several hours, on a desktop type machine 15 to 20 hours would not be uncommon. -
Issue with RFBIBL00 batch input processing
Hello ABAP Experts,
I am having issue with a speed of batch input session processing. If you can please help me resolve the issue.
I have a requirement to post liquidation document to clear open vendor down payment items and then to clear vendor invoice with liquidation. I have created a custom program to address this requirement where it uses the SAP program and Call Transaction.
For liquidation document posting, I am using the program RFBIBL00. The custom program has steps:
1. Submit RFBIBL00 via job to create batch input session
2. Close job
3. Submit RSBDCSUB via job to process batch input session
4. Close job
5. Wait for 15 seconds
6. Read job log to get liquidation document number
7. If no document posted then display error
The issue is when the job log is read it says u2018Session 10zrsbdcsubxxxxxxx is being processed by user in mode on serveru2019 and there is no error message or no document number with message number 312. So the program displays error message, stops and cannot perform the second step. If I check in the system after a couple of minutes I find the document posted. I also increased the wait time. But the first record processing always takes longer and the program finds as a failure. The program can process next several records with success.
I am looking for expert help if you please suggest how to resolve this.
Thanks & Regards.
YashasviHi,
Have you tried calling FM DEQUEUE_ALL before/after schedulling job?
Gouri. -
Issue with Data Load to InfoCube with Nav Attrivutes Turned on in it
Hi,
I am having a issue with loading data to a InfoCube. When i turn
on the navgational attributes in the cube the data load is failing
and it just says "PROCESSED WITH ERRORS". when i turn them off
the data load is going fine. I have done a RSRV test both on
the infoobject as well as the cube and it shows no errors. What
could be the issue and how do I solve it.
Thanks
Rashmi.Hi,
To activate a navigation attribute in the cube the data need not be dropped from the cube.
You can always activate the navigation attribute in the cube with data in the cube.
I think you have tried to activate it in the master data as well and then in the cube or something like that??
follow the correct the procedure and try again.
Thanks
Ajeet -
Performance issues with class loader on Windows server
We are observing some performance issues in our application. We are Using weblogic 11g with Java6 on a windows 2003 server
The thread dumps indicate many threads are waiting in queue for the native file methods:
"[ACTIVE] ExecuteThread: '106' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE
java.io.WinNTFileSystem.getBooleanAttributes(Native Method)
java.io.File.exists(Unknown Source)
weblogic.utils.classloaders.ClasspathClassFinder.getFileSource(ClasspathClassFinder.java:398)
weblogic.utils.classloaders.ClasspathClassFinder.getSourcesInternal(ClasspathClassFinder.java:347)
weblogic.utils.classloaders.ClasspathClassFinder.getSource(ClasspathClassFinder.java:316)
weblogic.application.io.ManifestFinder.getSource(ManifestFinder.java:75)
weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
weblogic.application.utils.CompositeWebAppFinder.getSource(CompositeWebAppFinder.java:71)
weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
weblogic.utils.classloaders.CodeGenClassFinder.getSource(CodeGenClassFinder.java:33)
weblogic.utils.classloaders.GenericClassLoader.findResource(GenericClassLoader.java:210)
weblogic.utils.classloaders.GenericClassLoader.getResourceInternal(GenericClassLoader.java:160)
weblogic.utils.classloaders.GenericClassLoader.getResource(GenericClassLoader.java:182)
java.lang.ClassLoader.getResourceAsStream(Unknown Source)
javax.xml.parsers.SecuritySupport$4.run(Unknown Source)
java.security.AccessController.doPrivileged(Native Method)
javax.xml.parsers.SecuritySupport.getResourceAsStream(Unknown Source)
javax.xml.parsers.FactoryFinder.findJarServiceProvider(Unknown Source)
javax.xml.parsers.FactoryFinder.find(Unknown Source)
javax.xml.parsers.DocumentBuilderFactory.newInstance(Unknown Source)
org.ajax4jsf.context.ResponseWriterContentHandler.<init>(ResponseWriterContentHandler.java:48)
org.ajax4jsf.context.ViewResources$HeadResponseWriter.<init>(ViewResources.java:259)
org.ajax4jsf.context.ViewResources.processHeadResources(ViewResources.java:445)
org.ajax4jsf.application.AjaxViewHandler.renderView(AjaxViewHandler.java:193)
org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
On googling this seems to be an issue with java file handling on windows servers and I couldn't find a solution yet. Any recommendation or pointer is appreciatedHi shubhu,
I just analyzed your partial Thread Dump data, the problem is that the ajax4jsf framework ResponseWriterContentHandler triggers internally a new instance of the DocumentBuilderFactory; every time; triggering heavy IO contention because of Class loader / JAR file search operations.
Too many of these IO operations under heavy load will create excessive contention and severe performance degradation; regardless of the OS you are running your JVM on.
Please review the link below and see if this is related to your problem.. This is a known issue in JBOSS JIRA when using RichFaces / ajaxJSF.
https://issues.jboss.org/browse/JBPAPP-6166
Regards,
P-H
http://javaeesupportpatterns.blogspot.com/ -
Issue with a load from R3 to BW 3.5
Hi Guys,
We are having an issue here with a load from R3 to BW 3.5 to an ODS and
a transactional infocube.
In a daily basis we are running loads to BW from R/3 infosets and all
of them but one loads fine.
The one that is having problems is actually the one that loads more
data, therefore the infopackage is divided into two infopackages.
In the update rule of the first ODS we are running an initial routine
in which we are doing a RSDRD_SEL_DELETION (selective deletion) of the
data to be loaded to both the ODS and the infocube, and is actually
here where we got the core dump.
Our first assumption was that maybe there was any yellow request in the
transactional infocube avoiding the selective deletion but we have
discarded this.
We think that, as the only one failing is the one that divides into two
infopackages, the problem might be that at the moment that the first is
triying to delete the second one is loading data into the ods and there
we get the dump.
The question here is ¿Could this be the problem? ¿How could we
workaround this if this is the case?
Thanks for any suggestion.Hi,
Be carefull on ODS activation, if you're using 2 infopackage and/or deleting data from an ODS which is lock for an activation, you'll occurs a dump.
Check SM12 / ST22 / SM21 and job logs in SM37.
And if pb still occurs for a load, debug it in start routine.
Regards,
Maybe you are looking for
-
Dropdown help on textbox just like Google textbox search help dropdown
Hi, I am on a requirement to show dropdown help while typing a text in textbox in ABAP webdynpro For ex: If I type "P" in textbox, dropdown help show all related coustomers name whose names starts with "P" . Similarly, If I type " Bang" then dropdow
-
Blackout button to create new desktop when wallpaper is filled with black
Maybe this is not a bug but working-as-designed, but after I changed my wallpaper that is almost black, a button to create a new desktop in mission control can't be seen. This seems be due to the button is designed with black color. Actually I can pr
-
Hi Can anyone guide me in doing subcontracting with CIN active. What are the steps? Which challan is used and excise registers to be updated? I ve done incoming invoice process for raw materials and RG23A is updating. regards B Shar
-
Please tell me what's the usage of inner class?
I am a newbie on java and i have used c++ for 3 years,is java's inner class the same with c++? Thanks in advance!
-
Can I automatically toggle between t/f in a loop based on a timer?
Instead of the user manually toggling back and forth between true and false, I would like the code to do it automatically based on a timer.