Issue with canceled jobs

Hi all,
Got an issue with dat aloads in BI 7.
We have transaction data loads scheduled in process chains, and during the execution of Infopackage in the processchain, the connection to ECC is loast and also the BI server went down.
When the servers are recovered, the status of the infopackages running are in Yellow.
Now i have two questions.
1. What happens if the infopackage status is yellow i.e half of the records are transferred to BI and half are left out in ECC.
   Executing the LUW's in TRFC  will solve the issue?
2. What happens if the request becomes RED, with half of the records transferred?
    How can we recover the next half of the records?

Hi,
See, that is not the case....if your connectivity goes in between the data load is in progress...No matter whether it is delta load of full load....u always have the option fo deleting the red request and going for a reload....It is as simple as that....
If it is delta load...it will propmt you a pop up saying that the last delta was incomplete...do you want to repeat the delta load....
Once you do the Repeat Delta...entire data will be reloaded again....Also once u do Repeat delta...From the Delta Queue entire records which has failed during the previous load and all the new records created  till that time will be loaded in BW...
Also for you infomation...there is nothing like Repeat Delta Queue and Normal Delta Queue...There exist only one Delta Queue...
Hope it is clear...
Rgds,
Amit Kr.
Edited by: Amit Kr on Jul 26, 2010 1:04 PM
Edited by: Amit Kr on Jul 26, 2010 1:05 PM

Similar Messages

  • Issue with cancelled invoice

    Hi all,
    We got an issue with cancelled invoices.
    The user cancelled an invoice and in leiu of that created one more invoice against that.
    When we extracted the deltas to BI, the cancelled invoice is appearing as cancelled Item wise but not the entire document is cancelled.
    Please suggest what can be the issue and how to rectify this.
    Regards
    Kumar

    Hi
    Please check in the delivery document in VBUK and VBUP tables. Also check in the delivery document as  the status showing 'C' should be  Fully Picked and not fully invoiced.Also check the copy controls VTFL.Can you let us know what is the billing document type that has been used for cancelling  billing document. Check in the F2 billing document type weather cancellation billing document type has been assigned or not.
    Regards
    Srinath

  • Issue with background job--taking more time

    Hi,
    We have a custom program which runs as the background job. It runs every 2 hours.
    Itu2019s taking more time than expected on ECC6 SR2 & SR3 on Oracle 10.2.0.4. We found that it taking more time while executing native SQL on DBA_EXTENTS. When we tried to fetch less number of records from DBA_EXTENTS, it works fine.
    But we need the program to fetch all the records.
    But it works fine on ECC5 on 10.2.0.2 & 10.2.0.4.
    Here is the SQL statement:
    EXEC SQL PERFORMING SAP_GET_EXT_PERF.
      SELECT OWNER, SEGMENT_NAME, PARTITION_NAME,
             SEGMENT_TYPE, TABLESPACE_NAME,
             EXTENT_ID, FILE_ID, BLOCK_ID, BYTES
       FROM SYS.DBA_EXTENTS
       WHERE OWNER LIKE 'SAP%'
       INTO
       : EXTENTS_TBL-OWNER, :EXTENTS_TBL-SEGMENT_NAME,
       :EXTENTS_TBL-PARTITION_NAME,
       :EXTENTS_TBL-SEGMENT_TYPE , :EXTENTS_TBL-TABLESPACE_NAME,
       :EXTENTS_TBL-EXTENT_ID, :EXTENTS_TBL-FILE_ID,
       :EXTENTS_TBL-BLOCK_ID, :EXTENTS_TBL-BYTES
    ENDEXEC.
    Can somebody suggest what has to be done?
    Has something changed in SAP7 (wrt background job etc) or do we need to fine tune the SQL statement?
    Regards,
    Vivdha

    Hi,
    there was an issue with LMT's but that was fixed  in 10.2.0.4
    besides missing system statistics:
    But WHY do you collect every 2 hours this information? The dba_extents view is based on really heavy used system tables.
    Normally , you would start queries of this type against dba_extents ie. to identify corrupt blocks and such:
    SELECT  owner , segment_name , segment_type
            FROM  dba_extents
           WHERE  file_id = &AFN
             AND  &BLOCKNO BETWEEN block_id AND block_id + blocks -1
    Not sure what you want to achieve with it.
    There are monitoring tools (OEM ?) around that may cover your needs.
    Bye
    yk

  • Virsa CC 5.1: Issue with Background Job

    Dear All,
      I almost finished configuration of our new Compliance Calibrator dashboard (Java stack of NW'04). But, unfortunately, have an issue with SoD analysis now.
      Using SAP Best Practice recommendations, we have uploaded all functions, business processes and risks into CC database, and then successfully generated new rules (there are about 190 active ones in our Analysis Engine).
      I also configured JCo to R/3 backend and was able to extract the full list of our users, roles and profiles. But somehow background analysis job fails.
      In job history table I see the following message: "Error while executing the Job:null", and in job log there is an entry, saying that "Daemon idle time longer than RFC time out, terminating daemon 0". But it's quite strange, as we use default values: RFC Time Out = 30 min, and daemons are invoked every 60 seconds.
      Please, advise whether you had similar issues in your SAP environment and, if yes, how you resolved them.
    Thanks,
    Laziz

    Hi Laziz
    I am now just doing the first part of CC. May I know your details in how to configured Jco To R/3 Backend? Do you need to create any SM59 for connection T in R/3? If yes, I am lacking of the details to do that if you could help? Thank you.
    Regards
    Florence

  • SAP BW structure/table name change issue with BODS Jobs promotion

    Dear All, One of my client has issue with promotion of BODS jobs from one environment to another. They move SAP BW projects/tables along with BODS jobs (separately) from DEV to QA to Prod.
    In SAP-BW the structures and tables get a different postfix when they are transported to the next environment.  The promotion in SAP-BW (transport) is an automated process and it is the BW deployment mechanism that causes the postfixes to change.  As a result with the transport from Dev to QA in SAP-BW we end up with table name changes (be they only suffixes), but this does mean that when we deploy our Data Services jobs we immediately have to change them for the target environments.
    Please let me know if someone has deployed some solution for this.
    Thanks

    This is an issue with SAP BW promotion process. SAP BASIS team should not turn on setting to suffix systemid with the table names during promotion.
    Thanks,

  • Issue with brconnect jobs

    Hi All,
    we have recently Upgraded our Oracle from 9i to 10.2.0.4 and our kernel 640 also to 347 .
    Since the Upgrade my DB13 jobs are not running fine.
    I am getting error :
    brconnect: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file:No such file or directory
    I checked file   libclntsh.so.10.1 is available at /oracle/PD0/102_64/lib but I do not why I am getting this error.
    Can you please suggest to resolve this issue.
    Regards,
    Shivam Mittal

    Shivam Mittal wrote:
    Hi Orkun,
    >
    > We are using Linux OS, I check we have LD_LIBRARY_PATH set in our environment which is pointing to this environment.
    >
    > LD_LIBRARY_PATH=/usr/sap/PD0/SYS/exe/run:/usr/sap/PD0/SYS/exe/runU:/oracle/PD0/102_64/lib
    >
    > Please suggest do we have to set any other variable also to resolve the issue.
    >
    > Shivam
    Hi Shivam,
    Are you facing with this error while executing "brconnect" on ora<sid> user?
    What about the permission on the libclntsh.so.10.1?
    Do you have any problem on that file, after you executed "relink all"?
    Best regards,
    Orkun Gedik
    Edited by: Orkun Gedik on Jun 15, 2011 2:46 PM

  • Issue with Archiving_deletion job

    Team
    I am facing an issues due to archiving Deletion job canceleld halfway.
    We ran the archiving for SD_VBAK and it got completed successfully. It generated three archive file sessions. Now I am running the deletion job. One Archive deletion session was successfully completed. The other two jobs got canceled due to weekly system restart. I tried scheduling  new deletion via SARA and it runs successfully in test Mode. When I un-check the test mode and run it, the jobs are getting canceled throwing the following error.
    "Step 001 started (program S3VBAKDL, variant ZZCVB
    Archive file 000144-002SD_VBAK is being verified 
    Archive file 000144-002SD_VBAK is being processed
    New fill for archive for which fill was not completed
    Text 7600293102 ID ZH06 language EN not found    
    Job canceled after system exception ERROR_MESSAGE"
    Can somebody throw some light on how to fix this issue. ZHO6 is a document type.
    I unable to proceed further for other objects due to this issue.
    Please help.
    Regards
    Mathi

    Dear  mathi.
    Kindly check the  error log file. Please let us Know .and also check the in the Statics tab in sara transaction . check the Job number status (wheather it is green or Yellow)
    Thanks and Warm Regards
    Basavaraj Evani

  • Issue with canceling the reservations

    What are the steps to cancel a reservation that was created as a 921 or a 201? What we have been doing does not seem to work correctly and I have a feeling it only back orders the item rather than canceling it because the order gets reprinted on the next batch that runs.
    Following steps are done:
    1.       Canceling the reservations(921s) by putting in the deletion indicator in MB22
    2.       Canceling the corresponding TO in LT15.
    3.       Clearing the difference in LI21, (storage type 911)
    However , this only puts the order on backorder and will kick again on the next printed batch. The process we are doing for canceling is not working correctly. Please help.

    Thanks Joao,
    Mvt typ 921 is for GI for emergency orders via Warehouse. We can neglect it and analyze on 201 also not an issue.
    The process is as follows:
    1. Creating reservation via MB21 and creating corresponding TO via batch program that runs in background.
    2. In case reservation are to be cancelled for some reasons, do it via MB22 and hit on "d" (delete indicator)
    3. Since TO is already created, deleted the TO via LT15
    4. Since the stock is in Storage Type 911 coz of the TO, have to clear the difference via LI21 for Storage type 911.
    But after the above process, TO is getting generated in the next batch program for the cancelled reservation.
    Please let me know if the above makes sense. If not what are we doing wrong?
    Thanks

  • Issue with scheduled jobs

    Hello Team,
    After creating a new protection group, the jobs were frozen and was never kicked off.
    What could be the reason?
    Regards,
    Suman Rout

    Hi,
    Please see the below blog which may assist with troubleshooting scheduled jobs.
    Blog:
    http://blogs.technet.com/b/dpm/archive/2014/10/08/how-to-troubleshoot-scheduled-backup-job-failures-in-dpm-2012.aspx
    Pervious fourm post:
    https://social.technet.microsoft.com/Forums/en-US/ed65d3e0-c7d7-488b-ba34-4a2083522bae/dpm-2010-scheduled-jobs-disappear-rather-than-run?forum=dataprotectionmanager
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually
    answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

  • Issues with scheduling job in sm36 for a standard report...

    Hi,
    After creating a variant for a program, if I try to execute SM36 -> Define step and then, I select ABAP program, the variant name associated with it. Now what do I need to do to schedule job for that report.

    Hi,
    After giving the program and variant..
    Press the start condition button..
    Press Immediate to run immediately..
        Or
    Choose the date and time you want to run this job..
    After that press save.
    Then press save in sm36 for the job..THis will release the job...
    Thanks,
    Naren

  • How to Fetch Cancelled Jobs info along with the Short Dump Text

    Hi Gurus,
    I need to develop a report to fetch the cancelled jobs information for the given period. I also need to display the "Error Analysis" part of the Short Dump if it exists.
    I am able to fetch the Failed Jobs information and the Job log details using the FM "BP_JOBLOG_READ". But I need to show the "Error Analysis Text" on the report , if there is any Short Dump Exists for the Dump.
    Please give me your ideas to fetch the Error Analysis part of the short dump for a given Batch Job Name.
    Thanks in Advance.
    Best Regards,
    Sumalatha

    The dump information is in table SNAP. You could identify which dump you want by the date & time of the failed job - let's hope you don't have more than one dump with the same time. If it is ambiguous you could also compare the program name of the failed step with the program name in the SNAP data.
    The error analysis texts are in table SNAPT keyed according to which error occurred (which is data element code FC right at the start of the first record in the SNAP data). You will have to expand out the includes, and substitute the variable codes using values from the SNAP data. There is standard code to do this that you could copy - see program SAPMS380.
    To find out the details of the SAP process you could run transaction ST22 via the debugger and use the same mechanism.
    best wishes
    Ed
    PS Note these details apply to recent systems I think there may be differences if you go back to before ?2004, but I don't have such a system so can't check. You didn't say what release you have.

  • What happens sales order linked with wip job is cancelled

    HI,
    what happens sales order linked with wip job is cancelled ?
    actually if wip job is cancelled then sales order lines is on hold ?
    i wanted to know what if sales order of that wip job item line is cancelled say example  if that wip job already is in processing .
    please help me
    Thanks in Advance.

    If WIP job cancelled or Requisition/PO is cancelled, corresponding order line reservation will be cleared and will go to 'Supply Eligible' Status. Progressing this line will again follow the WIP/Requisition path based on item.

  • Issue with getting the entire spooled job into the pdf document

    Hi All,
    My scheduled job runs fine and completes successfully but it appears to have some issues with getting the entire spooled job into the pdf document which it sends to a an end user.Has anyone encountered it before.Your kind assistance would be appreciated.
    Thank you.
    Regards,
    John

    Hi,
    Please read below link for your query:-
    http://help.sap.com/saphelp_nw04/helpdata/EN/85/54c73cee4fb55be10000000a114084/content.htm
    Regards,
    Anil

  • Sharepoint 2010 Content Deployemnt Job issue with duplicate fields in User information List

    Hi friends,
    I am facing below issue with the content deployment job.
    It was working earlier. But now since from couple of days all the content deployment jobs in production environment are failing with below error.
    Field name already exists. The name used for this field is already used by another field in the list. Select another name and try again.
    ObjectName="User Information List".
    When I check the fields in User information list in targeted site, I found couple of columns are dupicate like "ask me about",first name","Last name" etc.
    Do i Need to drop target site collection or recreate with fresh content deployment job.
    Please suggest.
    Please help .
    Regards
    Subrat

    Hi,
    According to your post, my understanding is that you got duplicate field error.
    Based on the error message, you can try to use the following code sample to remove duplicate records, and check whether it works:
    http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneralprevious/thread/41ee04bd-91fb-4bf9-932a-bac42c56c357
    Here is a similar issue, you can also use the ‘RemoveDuplicateColumn64’ provided:
    http://sharepointsurfer.wordpress.com/2012/04/27/how-to-fix-publishing-site-content-deployment-error-duplicate-first-name-column/
    What’s more, as you had said, you can recreate a site with a fresh deployment job.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Cancel Product change issues with IS-U

    Hi All,
    We are implementing CRM 2007 with SAP IS-U. We have the following issues On Cancel Product change:
    1) The Product allocation time slice does not reset to 31.12.9999
    2) The time slice on installation does not reset to that of the original value
    3) Any configurable attributes that were created as a result of the product change process are not reverted back / the time is not end sliced.
    Let me know if any one has encountered any such problems.
    Thank you,
    Binno Don Thomas

    Hi, a Little late but..
    This is a problema from your 3 scsm services, maybe in your principal or secundary server.  You must to restart services in an special order and delete application cache.
    Please review
    http://www.systemcentercentral.com/scsm-2012-tip-all-workflows-stuck-in-new-status-and-never-completing-issue-and-workaround/
    it Works!
    If you have principal and secondary do it in both servers.
    I think this problem is for bad performance in databases and application, so review your hardware design, and logical, so review workflow performance too.
    For items when state new, you must change it to inprogress with smlets

Maybe you are looking for