Issue with challan mapping

Hi All,
During challan mapping, while executing the 4th step (I.e; futher processing) normally on the right side of the screen which is for Tax Deduction Details table, all the employees mapped will be displayed. But in my case that entire coloum is empty. could anyone help me with this issue? Also the following note is not implemented yet. please advice if this is required:
Note 1580248 - SAP_HR CLC - IN 2011 (Legal changes for Form 16 FY 2010-11)
regards,
Ayyaps
Edited by: Ayyaps sukumar on May 17, 2011 12:04 PM

HI,
Please make sure your current SP level should be 66 and applied the following notes
a) 1528165
b) 1546949
c) 1520182
d) 1566288
e) 1568324
f) 1573538
g) 1576504
h) 1573538
i) 1571048
j) 1580476
Also, make sure, feature 40ECC & 40ACK are maintained.
Regards

Similar Messages

Issue with challan mapping utility

Hi,
We are upgrading to new ECC 6 version.
The challan mapping program PC00_M40_CMAP ,when executed with details of challan no and tan no and payroll area with pyrl period , results in showing correct challan amount with 0 personnel nos mapped.
What do I do....?
We are at support pack 41 and CIN 41.
What is to be done next???
Shankar

While debugging the program I found out that in include PUMAPIN5,Abkrs is not passed as a parametre for structure PME01.As a result the TAN number value from feature is not being fetched.Pls let me what is correction note instruction or any other solution.
PUMAPIN5
FORM GET_TAN_NUMBER CHANGING P_TAN_NUMBER.
LOOP AT P0001 WHERE BEGDA LE PAYDATE             "PKT01290595
                  AND ENDDA GE PAYDATE.
ENDLOOP.
          PME01-BUKRS = P0001-BUKRS.
          PME01-WERKS = p0001-WERKS.
          PME01-BTRTL = p0001-BTRTL.
Get the employer details from feature 40ECC
     CLEAR: ECC_TAB, TAN-NUMBER.
     REFRESH ECC_TAB.
     CALL FUNCTION 'HR_FEATURE_BACKTABLE'
                EXPORTING
                FEATURE                     = '40ECC'
                STRUC_CONTENT               = PME01
                KIND_OF_ERROR               = '3'
           TABLES
                BACK                        = ECC_TAB
       CHANGING
            STATUS                      =
          EXCEPTIONS
            DUMMY                       = 1
            ERROR_OPERATION             = 2
            NO_BACKVALUE                = 3
       IF SY-SUBRC = 0.                                         "#EC *
         CLEAR ECC_TAB.
         READ TABLE ECC_TAB INDEX 3.
         TAN-NUMBER = ECC_TAB-BACK+0(15).
       ENDIF.
ENDFORM.                    " GET_TAN_NUMBER

Issue with heat maps refresh process in EID 3.1?

Issue with Heat Maps in EID 3.1? Heats maps don't refresh unless you go back to home page and then again go back to the Endeca app.
In Oracle Sample app if we open the Map tab we will see that Milwaukee is really hot in the heat map. now if we filter the data to just show data from 100 miles within Orlando, FL then the map will get refreshed to show that area but the colors on heat maps do not change.
Now if we keep the refinements same and go back to home page and again go back to sample app and maps tabs then it will still show area of 100 miles within Orlando, FL which is good but now heat map would have updated and it would show us correct color.
Now if we remove the refinement then it would show complete US map as hot which is again wrong.
I have observed this issue in chrome browser as well as firefox.
Is there anyway to overcome this issue?

This issue was resolved after applying latest patch from Oracle.

Special characters issue with Nokia Maps on N95

Hi there,
when using Navigation in conjunction with Nokia Maps on my N95, all streets and towns which contain any special character in their name (for example: é, è, ü, ä, ö, etc…) do appear as unreadable garbage on the screen of the N95.
I only noticed the problem after having purchased the 3 years license Navigation upgrade (EUR 99.99) and immediately notified Nokia. That was back in October. Since then I have called them at least 10 times and ultimately I have asked for a refund as no solution is still available.
In all these calls with Nokia, the only reasonable argument I heard was that maybe (!!!) the new software update version 20.0.015 released back at the end of November could solve the issue. Unfortunately, for my phone (which is a branded one) the update is not yet available.
Today, after calling them again, I was told that Nokia’s policies do not foresee refunds and therefore my request has been rejected. I was told to bring my phone to a Nokia Store and see if they can help me (I don’t see how). I was also told that maybe I would have to send-in the phone for repair.
This is soooo frustrating that despite the 3 months of patience and all the money spent for the N95 (not quite cheap), the navigation upgrade and the phone calls to Nokia, I still have the same issue. I will probably end up filing a complaint with a monthly consumer’s magazine in the hope they will publish my story.
After all, it may not even be Nokia’s fault but rather the guys who are responsible for the maps, but if Nokia accepts to have a commercial venture with a vendor, than they also accept liability for the joint product. And by turning down my legitimate request for refund, they have proven not to give a **bleep** about people like you and me.
Forgive me for the long post - needed to release some of the frustration...

I have been using an N95-8GB since Nov.'07. From my experience with this phone that has a built-in mass memory besides the phone memory. I had trouble retrieving some of the softwares I have installed. For eg. I have saved some themes in the mass memory & I could not find it when I want to delete it. There are some 3rd parties games software inside where I cannot even delete
This is what I don't like about the phone. I have bought an N82/Black recently as it uses an external memory card.
Coming back to Nokia maps. Personnaly, I don't think they are that good & I have problem downloading it into my phone from my PC after having downloaded it from Nokia.
By the way the Nokia map is not even the latest map 2.0. Is still a 1.0
I used Navfone map software & it works OK in the 8GB. You have to purchase it.
I have used a couple of N-series phones in the past ie. N-90, N-70, N-71, N-73, N-80/Black, N95, N-95/8GB & now N-82.
Common with all N-series phones. After you have disconnected when you are done with your call you have to wait for a while before the word "disconnected" disappears.
The more features it has, the more problem you are gonna to encounter.
Unless you want to download softwares into your phone & have a good camera thats where the N series phones come in.
For normal usage, a 40 series phone will suffice.

FDM: Issues with importing mapping using excel files

Hi All,
I am trying to map ICP Entries using an excel file.
I have made 2 mapping (explicit) entries, manually and exported it in Excel and then added all the Mappings in the same file, in proper format. when I am importing, I am not getting any error but the mapping is not getting updated and the new entries are also not getting added. so Ideally no Change in the tDatamap table.
Environment details: FDM Version 11.1.1.3 is getting used. Target App is Essbase 11.1.1.3. able to connect to Essbase, no issues with connectivity.
Has anyone face this issue.

The section of the admin guide I reference will tell you how to create a properly formatted excel workbook. Import XLS will work if the excel workbook is set up properly. The import XLS functionality will not change existing records, only add new ones.
Your template requires that the first cell is the table name. The second row is the table field names and rows 3 through X are the values to be inserted into the table. The named range beginning with UPS needs to highlight all of these rows and columns.
Quite honestly, if you take the time to review the admin guide, I'm sure you'll find the answer that you need. Please understand that, like you, most of us that post on this board are consultants. We share knowledge to help the community better utilize the product. It's frustrating to hear that none of the answers that I previously provided you were at all helpful.
Edited by: TonyScalese on Nov 30, 2010 3:23 PM

Ipsec Stateful Failover issue with Dynamic-Map

Hi all, I have an issue with a couple of Cisco ISR 2921 in Ha Ipsec Stateful Failover configuration.
With static crypto-map, stateful works good, Ipsec sessions are correctly trasmitted from Cisco Active router to Cisco Standby router.
With dynamic-map and profile, stateful fails, Ipsec sessions are not correctly trasmitted from Cisco Active router to Cisco Standby router.
I tried different IOS version:152-1.T3, 152-3.T2 and 153-1.T but I have the same behavior.
Could you help me?
Marco

Yes it is supported. It is supprted on VAM, VMA2, VAM2+.

HP Officejet 4500 Wireless Printing Issues with Online Maps & Financial Institutions

I have an HP Officejet 4500 Wireless printer that I have wireless connection to my HP G72 Laptop running Windows 7 (64 bit) with Internet Explorer 9. I am having trouble printing online maps from either Bing Maps or Google Maps. It seems the print jobs get stuck in the print que and always show an indefinite status of “Printing” in the que but never get printed.
I’ve tested my other applications including Office 2010 and all other jobs seem to print just fine. I do use the “Print” button located in each of the online Map sites (Bing, Google). This is when the jobs get stuck.
I do also have the HP Bing Bar installed with Smart Print. The Smart Print feature seems to work with the online maps just fine (seems I’ll just use it instead).
Another separate printing issue is that I can never get any of my online financial transactions to print from any of my online financial institutions with either the Internet 9 print features or the HP Bing Smart Print feature. I can never get those to print (have to wait for the PDF statements to be available).
Any ideas as to why I can print the maps or online financial transaction? I get no error messages either.

Hi,
Please use the following tips/instructions to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Issue with user mapping and SAP reference system

Hello Gurus,
I have this strange system behaviour when preparing my system for single sign-on using user mapping.
Case 1.
In the user management property category, I have the following defined.
Authentication Ticket Type - SAP Logon Ticket
Logon Method - UIDPW
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_PRD
Result= when I go to identity management to assign the reference system (the default alias - SAP_PRD)...I do not see the system alias there.
Case 2:
In the user management property category, I have the following defined
Authentication Ticket Type - SAP Logon Ticket
Logon Method - SAPLOGONTICKET
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_DEV
Result, when I go to the identity management to assign the refernce system (the default alias - SAP_DEV), I see it there.
What might be my issue? Does it mean I can't assign SAP reference if I am using UIDPW as logon method?
Please help me.

Hi Mahesh,
Thanks for the feedback. I am relatively new to EP...so please I won't mind if you can guide me on how to go about this.
This is what I did...
I chose System Administration > Permissions
In the PCD, I located my system with the alias, SAP_PRD
It opened up the permission assignment area.
Now I have these permissions set
Administrator - Full Control
Administrators - Full control
com.sap.caf.eu.gp.roles.superuser - Full control
Everyone (built in group) - Full control
Everyone (Everyone role)- Full control
super_admin_role - Owner
For all the above End User box is checked.
I can't find anyone end user group .
Once I pick UIDPW, the alias disapperars from the reference system list.
Please help.

Issue with Transporting Mapping

Hi,
There is a strange issue that we are facing while importing a mapping from one PI server to another.
Source PI server : PI 7.1
Target PI server : PI 7.1 EHP1
For the first time the softwarecomponent was import successfully. However eventually there were certain changes in the mapping and the mapping was transported to the target system.
While doing so we encountered an issue stating :-
The source structure, target structure, or a function library has been changed or could not be
found in the Enterprise Services Repository. The mapping definition contains elements or attributes
that does not exist in the changed structure, or function that were changed in a function library.
The relevant entries will be deleted
calculate122222222222222 function not found
       Signature of field 'a' has changed
       Signature of field 'b' has changed
       Signature of field 'c' has changed
Howerever there is no such udf in the original software component. Also there is no Udf with name calculate.
There is no common udf for all the 3 target fields as well.
There is only an RFC lookup that is common among the 3 fields, but without any field 'calculate'
Kindly advice in case anyone has encountered such an issue.
Regards,
            Milan Thaker

> calculate122222222222222 function not found
This is a default name, when the function is not found. You don't find the real function name in the error message.
If you use a standard function and this is no longer available after import -> OSS ticket.
If it is a global UDF, import it before the mapping.

Import Server issues with SP4 maps

While using the Import Server, I have a newly created map using Import Mgr 5.5 SP4. (I used a schema created by XI v.7 SP9). When it runs, it throw and exception with the following error message:
"Encountered a pre-SP4 map. The map needs to be upgraded to SP4.
Solution: Please, Launch the Import Manager GUI using the same source file and simply save the map"
It appears to not like new entries on the Partners table and balks at auto-mapping values for the compound field for the qualified lookup table at the Customer main level. The input record is outlined below. I have set the CONFIGURATIONS to "Replace/Replace/None" and "Automap values in batch" and in the map they are set to "Create/Update (ALL MAPPED)/Update (ALL MAPPED)".
Thanks in advance. Don
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:CustomerCreateResponseTest xmlns:ns1="urn:bp:xi:up:re:cust_mdm:cmdm:pr5:100">
- <CUSTOMER>
- <item>
 <CUSTOMERNO>0099999989</CUSTOMERNO>
 <MDMCUSTOMER>4539</MDMCUSTOMER>
 <CREATE_DATE>16/01/2007,09:39:30</CREATE_DATE>
 - <RETURN>
 <TYPE>E</TYPE>
 <MESSAGE>F2381 MESSAGE</MESSAGE>
 </RETURN>
 - <PT_CONTPART_RETURN> qualified lookup table
 - <item>
 <MDM_CONTACT>0000000002</MDM_CONTACT> non-qualifier
 <CONTACT>0002111119</CONTACT> qualifier
 </item>
 </PT_CONTPART_RETURN>
 - <PARTNERS> qualified lookup table
 - <item>
 <CUSTOMERNO>0099999989</CUSTOMERNO> non-qualifer
 <PARTNER_FUNCTION>RE</PARTNER_FUNCTION> non-qualifer
 <PARTNER_NUMBER>0090098989</PARTNER_NUMBER> non-qualifer
 <DEFAULT_PARTNER>X</DEFAULT_PARTNER> qualifier
 </item>
 </PARTNERS>
 </item>
 </CUSTOMER>
</ns1:CustomerCreateResponseTest>

For all watching this thread:
We were running MDM 5.5 SP4. We applied Patch 2 (not patch 3) to our 32-bit system and we no longer get this error. We now get an error that the "Source File does not conform to the XML Schema", an entirely new issue. I will open a new question regarding that.
Thank you. Don

Issue with java mapping in a multi-mapping scenario

Hi
 We have a 1:n multiple mapping scenario in XI and the source is R3 proxy and target side is files. So, creating multiple file from a single message from R3 .
R3 --> XI --> Multiple files
Structure of the output of the multi-mapping is
- <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
- <ns0:Message1>
<Transaction>
</Transaction>
<Transaction>
</Transaction></ns0:Message1>
</ns0:Messages>
wherein each Transaction node represents a file.
Now, we need to introduce a constant /string like
<!DOCTYPE Transaction PUBLIC \"-//XXXXXX//DTD BatchReceiptAuthorization//EN\" \"http://dtd.XXXXXXX.com/dtds/ReceiptAuthorization.dtd\">
on each of the files at the very beginning - i.e within each transaction node , in the above structure, we need the above DTD string to be written. To do this, we added a java mapping as the second mapping after the message mapping that creates this string. Is this the right approach and would it produce what we are expecting ?
import java.io.BufferedReader;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.util.Map;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.DynamicConfiguration;
import com.sap.aii.mapping.api.AbstractTrace;
public class ModifyRootAndDelay implements StreamTransformation {
 AbstractTrace myTrace;
public void execute(InputStream input, OutputStream output) throws StreamTransformationException {
 try{
 BufferedReader reader = new BufferedReader(new InputStreamReader(input));
 String NameSpacePrefix = "<!DOCTYPE Transaction PUBLIC \"-//innotrac//DTD BatchReceiptAuthorization//EN\" \"http://dtd.innotrac.com/dtds/ReceiptAuthorization.dtd\">";
 String sLine = null;
 StringBuffer XmlMsg= new StringBuffer();
 String Result,PayloadBody;
 int indexOfFirst;
 while ((sLine = reader.readLine()) != null) {
 XmlMsg.append(sLine);
 String StartingTag = XmlMsg.toString();
 indexOfFirst = StartingTag.indexOf("<MerchantID>") ;
 PayloadBody=new String(XmlMsg.substring(indexOfFirst));
 Result=NameSpacePrefix.concat(PayloadBody);
 output.write(Result.getBytes());
 /* Thread.sleep(200000); */
 }catch(Exception e){
 myTrace.addWarning("Exception raised in the JavaMapping:modifyNamespace.java""\n The Exception Message: " e.getMessage());
 throw new RuntimeException(e.getMessage()) ;
 } public void setParameter(Map param) {
 myTrace = (AbstractTrace) param
 .get(StreamTransformationConstants.MAPPING_TRACE);

Hi XI Gurus
 In my scenario, I sent the inputstream that is being passed to the Java execute method - to trace and I see that the whole of the xml file - as shown below - which is the output of message mapping ( from the first mapping step ) in sent to the execute method of the java mapping a single call
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<Transaction> </Transaction>
<Transaction> </Transaction>
</ns0:Message1>
<ns0:Messages>
So, I modified Java mapping program to look for multiple occurences of <Transaction> tag and prefix them with my constant DTD Literal - which is the primary reason , why I had to use Java mappings after the message mapping.
Now, I get an error is XI- SXMB_MONI
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING" />
<SAP:P1>unexpected symbol; expected '<', '</', entity refe</SAP:P1>
<SAP:P2>rence, character data, CDATA section, processing i</SAP:P2>
<SAP:P3>0</SAP:P3>
<SAP:P4>113</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The exception occurred (program: CL_XMS_MAIN===================CP, include CL_XMS_MAIN===================CM00A, line: 609)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Should I create multiple outputs - as many as the numberof target split files ( of type outputstream ) from the execute method in the java program ?

Issue with XSLT Mapping

Hi Team,
I have one requirements which I am explaining below:
Source structure should be:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Student xmlns:ns0="urn:bp:xi:hr:edm:test:100">
 <Data>
 <FName>
 <LName>
 <Marks> Here Data fiels is 0......Unbounded.
 <Maths>
 <Science>
</ns0:MT_Student>
and Target structure must be like below:
<MT_Student_Result>
<Data>
 <Name> Here data field is 0......Unbounded.
 <Marks>
 <Total_Marks>
In the target structure Filed "Name" is obtained by concating "FName" and "LName" in the source structure
and the field "Total_Marks" is the sum of field "Maths" and "Science" in the source structure.
I have used XSLT mapping to obtain this.I have got the value of the "Name" field in the Target structure as required but I am not getting the value of the field "Total_Marks" in the target structure as required.Every time I am putting any value the result is comming as "NaN" as a value of the field "Total_Marks".Can you explain what is the issue?I am providing the code that I have done
<?xml version="1.0" encoding="UTF-8"?>
<xsl:transform version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:fo="urn:bp:xi:hr:edm:test:100" xmlns:ns0="urn:bp:xi:hr:edm:test:100">
<xsl:template match="/">
<MT_Student_Result>
<xsl:for-each select="ns0:MT_Student/Data">
<xsl:variable name="name" select="FName"/>
<xsl:variable name="surname" select="LName"/>
<Data>
<Name>
<xsl:value-of select="concat($name,'',$surname)"/>
</Name>
<Marks>
<Total_Marks>
<xsl:variable name="maths" select="ns0:MT_Student/Data/Marks/Maths"/>
<xsl:variable name="science" select="ns0:MT_Student/Data/Marks/Science"/>
<xsl:value-of select="($maths+$science)" />
</Total_Marks>
</Marks>
</Data>
</xsl:for-each>
</MT_Student_Result>
</xsl:template>
</xsl:transform>
Edited by: ATANU1 on Mar 17, 2011 1:40 PM

Hei,
you have to add the namespace prefix to each element of the path (and of course: check out if the hierarchy is matching)
ns0:MT_Student/ns0:Data/ns0:Marks/ns0:Science
Regards,
Udo

Sending IDoc Batches to SAP: Issue with Header Mapping for SNDPRN

We are sending batched IDocs from XI to SAP. We need the individual IDocs to reflect different SNDPRN values. Our mapping creates the different IDoc EDI_DC40 record correctly with different SNDPRN values. However, XI wipes out the SNDPRN values in the payload. When we define Header mapping to get the Sender Party as the XPath to the SNDPRN in the payload, then the header mapping errors out because the XPath returns multiple values.
I wanted to know if anyone has successfully implemented sending IDoc batches to SAP from XI with different SNDPRN values.
Your feedback is appreciated.
Jay Malla
Licensed To Code
Genentech SAP XI Team

Hello,
I have the same problem. I want XI send an IDOC with the SNDPOR, SNDPRT and the SNDPRN that are in the EDIDC40.
I find this in sap.help : 
Mapping
The IDoc adapter does not make any special demands on mapping. The IDoc adapter must simply be provided with an IDoc XML structure at the Integration Server outbound channel. This either already exists or must be generated by using a mapping.
If the IDoc XML structure contains a control record, it is deleted and created again by the IDoc adapter. If you want to include additional values in the control record, you must select the Apply Control Record Values from Payload checkbox in the parameters in the communication channel and provide a corresponding mapping for the values.
You can include the values from the following fields in your IDoc control record:
MESCOD, MESFCT
TEST
EXPRESS
STD, STDVRS, STDMES
SNDSAD, SNDLAD
RCVSAD, RCVLAD
REFINT, REFGRP, REFMES
http://help.sap.com/saphelp_nw04/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/frameset.htm
Perhaps we must use party configuration but I don't know how do this !
Regards,
Chris

Issue with Value Mapping table

Hi
I want to upload a external value mapping table to XI.
I do not want to code for it on the SAP R/3 side. and there might be more than 2000 value mappings. so can we upload a external mapping table.
Is it possible?? if yes, then how??.
Thanks
Nikhil

XI 3.0
Hi,
first of all one helpful information:
You can see all data of the value mapping tables using the
runtime workbench: Go to the IntegrationBuilder->
Integration Monitoring->Cache Monitoring, select 'Search
for Value-Mapping' and choose your context.
The value mapping tables are located in the J2EE part of
XI. You have to send your value mapping data to an Java proxy
located in the J2EE part. First, the inbound proxies
(synchronous and asynchronous) need to be activated.
There are two urls, named in the docu, you have to call
from a web browser:
(asynchronous replication scenario)
http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous
(synchronous replication scenario)
http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication
You only need to perform this step once (for each
installation).
If you already have a sender for the mapping data, the
next step is to configure the scenario in the directory
Create a communication channel with
Adapter type: XI
Transport protocol: HTTP 1.0
Message-Protocol: XI 3.0
Adapter-Engine: Integration Server
and host name and http port of the XI J2EE Engine and Path Prefix: /MessagingSystem/receive/JPR/XI
The user XIAPPLUSER has the required permissions.
For an asynchronous communication you can use the
inbound interface ValueMappingReplication from the namespace http://sap.com/xi/XI/System.
In that namespace there are also outbound interfaces you
can use to generate a sender proxy and synchronous
interfaces for the same purpose. Set the created communication channel as the receiver channel.
You may need a mapping and so on depending on your
sender. If you use the provided outbound interfaces there
is no mapping required.
The Data:
You can create your own GUIDs using some function like GUID_CREATE in ABAP. You don't need to declare the context you use. Something like http://mycompany.com/Test should be ok.
A sample in ABAP:
CRM and R3 are the names of the business systems.
data: lcl_value_mapping type ref to co_svmr_value_mapping_rep,
 ls_value_mappings type svmr_value_mapping_replication,
 ls_item type svmr_value_mapping_rep_item,
 lcl_system_fault type ref to cx_ai_system_fault.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123548'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'CRM'. <- Business System A
ls_item-identifier-value = '2'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
ls_item-operation = 'Insert'.
Use the same guid for another value of the same group
ls_item-group_id = '315286378563858425463215845123548'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'R3'. <- Business System B
ls_item-identifier-value = '1'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
create object lcl_value_mapping.
try.
 call method lcl_value_mapping->execute_asynchronous
 exporting
 output = ls_value_mappings.
 commit work.
 catch cx_ai_system_fault into lcl_system_fault.
 write: 'Error: ', lcl_system_fault->errortext.
endtry.
See the XI documentation at SAP XI Design and Configuration Time -> Configuration -> Value Mapping -> Value mapping Replication for Mass Data.
Hope that helps.
Regards,
Christian

Issue with group mapping in ACS.

When we map AD group in ACS with ACS group it coming as AD group and * (As below â ,* â ) , Because of this * everybody is able to login irrespective of his AD group.
Please suggest way to only add the NT Group alone without the *.

Actually '*' means something else.
If you have a group on AD say 'Alfa'
when you do a mapping on ACS, you'll see it like this,
'Alfa', * ------- Group x
Above means, if a user a member of Group 'Alfa' on AD, AND can also have any other group membership on AD (meaning of *), then map it to Group x on ACS.
It does not mean map everyone to Group x, even if they are not a member of Group 'Alfa' on AD.
As mentioned by JG above, all the users are able to authentication because of your 'All other combination' or \DEFAULT mapping on ACS.
Map them to .
Then only those will be able to log in, for whom you have the mapping defined on ACS.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/GrpMap.html#wp940538
Check Step 8,
"The asterisk (*) at the end of each set of groups indicates that users who are authenticated with the external user database can belong to other groups besides those in the set."
Regards,
Prem

Issue with challan mapping

Similar Messages

Maybe you are looking for