Issue with character formats using duplex printing in smartform

Hi all,
I am getting a problem with character formats using duplex printing in smartform. I am using a text module with a bold character to display text in a window. The problem is that on the first back page,the text is being printed normally (without bold), but on the next pages, the back pages are being printed with the bold character format.
Can anyone know where is the problem..please.
Points to be rewarded..
Thanks.
Regards,
Zaheed.

Hi Zaheed,
Normally this should not happen.. and also there is no internal formatting done by SAP.. it will show based on what fomatting option we have specified..
If you are saying it is happening in ur case then
     1. Recheck whether whether you have same text module getting printed on the
         two page. If they are different then then individual check formatting option for
         each..
      2. If above point does'nt work for you ..then instead of bold char use normal
          format for text element and see if it is printing same on both page..
Try this out and let us know your findings...
Enjoy SAP.
Pankaj Singh

Similar Messages

CSV to Excel 2013 - Issue with number format

Hi,
I use Excel 2013 to manipulate CSV files. I experienced issue with number format cells. In my CSV file there is one column that presents latitude values in format: 52.05456464. When I open my CSV file in Excel 2013 all values in that column get separator
".", in this case my number is present like this: 52.054.454.464. I tried to change my cell format, and when opened the category was Number, I change it to the General but in that case I lost all "." and got 52054454464.
I also tried to open same file on other machine with Excel 2010 and file is opened correctly without issues and in cell format the category is general by default.
I hope that there is some kind of resolution for this.

Hi
According to your description, we may follow these steps:
highlight the column B > Home Tab > Number section > Select Number and choose "More Number Format" > Make sure the Negative number is chosen correctly. If you are using Custom format, we will have to change it.
Hope it helps
Best regards

Issue with Date Format

Hi All,
I m facing an issue with Date format in the prompt. I have used date presentation variables in my column formula as shown below:
FILTER("SKU Order Details"."Fulfilled Quantity" USING Time."Calendar Date" <= DATE '@{todate}{2900-01-01}')
The report returns data when I don't select any date range for start & end date prompts on the page. But when I select the start & end date values in the prompt, I m getting the following error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 10/22/2009 12:00:00 AM from 10/22/2009 12:00:00 AM does not match the specified format. (HY000)
I included the following formulas for start & end date prompts:
Start Date prompt: case when 1=2 then License."Ips Creation Date" else cast ('1.1.1900' as date) end
End Date prompt: case when 1=2 then License."Ips Creation Date" else cast ('1.1.2900' as date) end
Can you please help me resolve the issue.
Thanks,
Kartik

Hi Nico,
I tried putting the format that you mentioned, I m getting an error message.
My prompts have the following formula :
Start: case when 1=2 then License."Creation Date" else cast('1.1.1900' as DATE) end
End: case when 1=2 then Time."Calendar Date" else cast('1.1.2900' as DATE) end
My column formula has the following syntax:
FILTER("SKU Order Details"."Fulfilled Quantity" USING Time."Calendar Date" between DATE '@{start}{1900-01-01}' AND DATE '@{end}{2999-01-01}')
Error Message:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 11/17/2009 from 11/17/2009 does not match the specified format. (HY000)
Can you please let me know if something needs to be changed.
Thanks,
Kartik

Compatibility issue with developer 6i using (64 bit) OS

Hi All,
I am using oracle 9iR2 (32 bit) on Linux Red Hat (32 bit) with developer 6i. Now i want to upgrade OS Red Hat (64 bit) and migrate database 10gR2 (64 bit).Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
Thanks

Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
No, as long as developer 6i is at least patch 16. We use it.

Duplex printing for smartform

Hi,
Has anyone worked on Duplex printing for smartform? If yes, please tell me the procedure/steps that need to be taken for the same.
Thanks
Regards

Hi,
You can select Duplex printing in th epage properties of a page (D = Duplex)
The printer STARTS duplex printing from that page. This means that the printer triggers a pagefeed on that exact moment and starts printing on a new page. So when you have 1 page that stretches over more that one sheet of paper this means trouble. after every page the flow of the program starts a new Duplex print (thus feeding the current sheet and starts at a new page) this results in a new sheet of paper every page. this is not what you want.
You can solve this by creating 2 pages and set their respective NEXT PAGE to each other. Page 1 you set to DUplex, pagae 2 you leave blank..
But notice that when you select duplex printing most (if not all) printers start printing on the backside of the paper. When you use pre-printed (logo) paper, you will find that it prints the front on the back etc.
This can sometimes be corrected (if needed) by sending prescribe commands to the printer directly.
Good luck!
Joris

I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
http://www.digitalrebellion.com
Try deleting your render files and re-rendering the project.
Start with these and let us know how you go.
Tony

Issue with BDC program used for FBZ5 (Check Print)

Hi all,
I am having one requirement in Check printing. as per that i have made one Z program which will accept multiple Payment documents. I am passing selected accounting documents to BDC routine for Transaction FBZ5. (As in FBZ5 we can take a print for one Payment document not for multiple)
We can have 3 scenarios in FBZ5
1. Fresh Check printing (First time check printing)
2. Old Check (printing for same Check no)
3. New Check (After voiding older check)
Category 1 and 2 are working fine but i am facing problem in category 3.
For Category 3 : BDC Screen flow is like this
A. Tcode FBZ5 Start program: SAPMFCHK Screen: 750 --> Click on 'Print'
B. Program: SAPLSPO2 Screen: 0100 --> Here specify option 'New Check'
C. Program: SAPMFCHK Screen: 0700
    - This program belongs to new Tcode FCH7
    - Here we have to give Void Reason code
Now issue with Category 3:
While executing BDC in online and background mode my control is terminating at step C mentioned above
Troubleshooting:
I have debugged standard program of FBZ5
1. in Include MFCHKFD0 we can see call to Tcode FCH7 (PERFORM AUFRUF_FCH7.)
2. in form AUFRUF_FCH7 i found code related to BDC
   also there one statement is getting triggered -->   CALL TRANSACTION 'FCH7' USING BDC MODE 'A'.
So there is a BDC call inside my Z BDC program, so is this a reason why my program is not working for above scenario ?
Or can't we handle above scenario in a way mentioned above?

Hi Sandra,
I was trying to upload customer master in fd01 using bdc. The screens were different while recording. So could not perform the upload. Thenone screen was skipped so that the bdc was working fine and the data was uploaded.
This is the flow of the recording.
'SAPMF02D' '0105'.
SAPMF02D' '7105'
SAPMF02D' '0111
SAPMF02D' '0120
SAPMF02D' '0130
SAPMF02D' '0210
SAPMF02D' '0215
SAPMF02D' '0220'
SAPMF02D' '0230'
SAPMF02D' '0610
After the second screen was deleted the bdc worked fine.

Display issue with HTML formatted text in report builder

I am using the FCKeditor in my application to allow endusers
the ability to create formated text on reports. We curently are
experiencing 2 issues: 1. If you copy and paste from MS Word
2003/2007 it will not display the text correclty in the report; 2.
If you use the FCKeditor toolbar to insert bullets or a numeric
list it will not align the text correctly on the report. We are
using Coldfusion 8 with Hotfix 1 and Coldfusion Report Builder's
lastest build release.
Has one experiences this same issue with HTML fields not
printing correctly using the Report Builder? What other HTML
editors besides FCKeditor might we use?
Thanks,
Dan VanWieren

Can you tell me how to use </td> for each values
Give me your example report - using before or after report
Thanks
MT
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by fdenis:
Hi Gavin,
If I understand well, your HTML tags are coded directly in your fields in the database, right? Because if it was not the case, you could have use a format trigger checking for which destination you're generating your report...
if UPPER(:DESFORMAT) = 'HTML' or
UPPER(:DESFORMAT) = 'HTMLCSS'
then
-- insert your HTML code in the value
-- of your field. something like...
newValue := '<B>' | | :YOUR_FIELD | | '</B>
srw.set_field_char( 0, newValue );
else
-- when generating to other format,
-- you'd have to add the formatting as
-- you want.
end if
return( true );
Of course, if it's not acceptable to remove the HTML tag from your database fields, you could develop a procedure that would translate your HTML tags to the good formatting (eurk... ;-)
Good luck... :-)
Frederic
<HR></BLOCKQUOTE>
null

Performance Issues with Folio format in Ipad.

Hello everyone! My FIRST post here!!!
I work with educational games and I'm facing performance issues with games that I've made in HTML5 to play in Ipad. I tried to import them to the format folio in DPS (Adobe Digital Publishing Suite). However when I import the HTML game into Indesign and try to preview it in Adobe content viewer, the game doesn't open or works without perform properly (there is a lag that doesn't let you play the game with a little of fun).
The games that I've created have a memory use max of 35mb and weighs 30mb max.
Does anyone know what's happen and what I can do to fix that performance issue?
Thanks a lot!

Moved to DPS

Problem with duplex printing in smartforms

I have 2 pages in my smartform. both the page are with print mode 'D'(Duplex).
While printing the first page goes back for duplex printing but the output is printed on next page.
I want the second page to be printed at backside.
I have also tried other combination 1st page = D and 2nd page = ''. Nothing is working.
printer settings are all right also i have a different smartform it is printing in duplex mode and working fine.
what is the issue with this smartform?
Please help me.

hi,
in your main window of first page at the end adda an alternative -true or false
in the alternative add a condition saying if it is end of items.(end of items is nothing but a flag).
if this condition satisfies then call page 2 else call page1.
if it stil does not work then reply back then will give you another answer.
but before this is your output going to have multiple pages?

Issue with SaveAs PDF using XSLFOP

Hi, We have been using SaveAs method to generate PDF files using XSLFOP technique successfully, however, recently we ran into an issue where a very large report (about 100+ pages) generated a PDF file that could not be opened. We get the following error when we try to open the PDF file. “There was an error opening this document. The file is damaged and could not be repaired.” We tried it again with lesser range of dates and the proper PDF file is generated. (Report was about 35 pages). So we think it has something to do with the large volume of data which is causing the SaveAs method to generate the corrupt PDF file. Any help will be much appreciated !! Note : In the same folder where we have the EXE,PBD and DLLs, we have two subfolders fop-0.20.5 and jre. Thanks, Chirag Vora

Hello Chirag,
We submitted this problem to engineering 10 years ago with PowerBuilder 9 !!!
It appears to be a problem with the FOP processor which needs a large amount of memory to complete the task. You can find similar issues with other tools than PowerBuilder:
The oXygen-user October 2003 Archive by thread
As a workaround, you can save the data in XSL-FO format within PowerBuilder, then use the fop.bat file in the \Shared\PowerBuilder\fop-0.20.4\ folder to convert it from outside PB.
This will still give you the memory error until you modify the batch file to increase the maximum heapsize for java.
In the fop.bat file change the java start command to : java -Xms64m -Xmx256m ...
The option -Xms definies the initial heapsize for the java engine and -Xmx the maximum heapsize.
We believe the default maximum heap is 64MB and this is what it is running into (or running out).
Setting it to 256MB with -Xmx and it was able to complete
HTH,
Jacob

Issue with Date format - ABAP to XML

Dear Users,
We are currently facing an issue with the date formats in XML.
We have a system (.Net), which has a webservice that we are calling for information from SAP. We created a Proxy class in SAP from the WSDL file and have attempted to use the method that gets us required information based on the Timestamp passed from SAP. However, the timestamp that the INPUT structure uses has a data element XSDDATETIME_Z.
All we can send from SAP is a simple TIMESTAMP, but the .Net system doesn't accept it since it wants the timestamp in XML format i.e. <dd-mm-yyyy>T<hh:mm:ss>Z. SAP documentation says that the field should automatically do conversion from ABAP to XML format, but that doesn't happen. We don't want to build a string from Timestamp in the XML format and send it out since we might surely miss out on the different cases involved.
Can anyone please suggest a way for us to send the date out in the required XML format?
Many thanks!

Hi Vijay,
Look at the below sample code and it works fine, i guess there is something wrong in your code or conversion, post the actual code if you are still not able figure it out with the below example.
DATA: l_xml_string TYPE string,
      l_dat_time TYPE xsddatetime_z.
CALL FUNCTION 'CACS_DATE_GET_TIMESTAMP'
EXPORTING
   I_DATE                         = sy-datum
   I_TIME                         = sy-uzeit
IMPORTING
   E_TIMESTAMP                    = l_dat_time
EXCEPTIONS
   DATE_NOT_FILLED_BUT_TIME       = 1
   DATE_HAS_NO_VALID_FORMAT       = 2
   OTHERS                         = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL TRANSFORMATION id
SOURCE root = l_dat_time
RESULT XML l_xml_string.
IF sy-subrc EQ 0.
write: l_xml_string.
ENDIF.
Regards,
Chen

Issue with Date Format for Presentation Variables

Hi,
I am using dashboard prompts to capture begin date and end date in presentation variables. The dates selected from calendar are in the format mm/dd/yyyy.
In Asnwers I need to get a count of days between begin and end dates. I am using the column formula as shown:
TIMESTAMPDIFF(SQL_TSI_DAY, DATE '@{pBeginDate}', DATE '@{pEndDate}')
When ever I run the report from dashboard I get the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46046] Datetime value 1/1/2005 does not match the specified format. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Transaction Dates"."Transaction Date", TIMESTAMPDIFF(SQL_TSI_DAY, DATE ''1/1/2005'', DATE ''1/2/2006'' FROM "Dates"')}
SQL Issued: SELECT "Transaction Dates"."Transaction Date", TIMESTAMPDIFF(SQL_TSI_DAY, DATE '1/1/2005', DATE '1/2/2006') FROM "Dates"
Can anyone help me to reolve this date format issue?
Thanks,
Aravind

Hi,
see this below links
Issues with Prompts calender date
Regards
Naresh

Issues with Character Pallete after latest PS CS6 update

Since the latest update earlier this week, I've experienced major issues with the character palette - particularly the point size and tracking. The tracking issue is by far the greater of these two evils and the following explains the issues I've observed:
tracking - the number you type isn't the number used to set the tracking. The slider and up/down arrows do not remedy this problem, though they make it slightly more predictable. The number that appears seems random, though I've noticed a pattern in some instances (typing 20 sets tracking 18, typing 40 sets it 36, typing 60 sets it 54, and so on). This issue also appears to be connected to free transforming a text layer, so the pattern is possibly based on the percentage of scaling.
font size - the number you type works if size is increased in small increments to a certain point. Then it max's out, and this error appears repeatedly (after ok is clicked the error pops back up)
I've searched the web for resolutions to the issue and haven't found anything. This is what I've tried and none of it worked to any lasting degree:
- set units to pixels in preferences and restart photoshop
- set units back to points in preferences and restart photoshop
- restart photoshop and pc (several times)
- shut down photoshop and pc (several times)
- unplug pc and discharge static

I dont know the the below link. But if you go to Photoshop .com feedback. And go to Topics>Problems and sort by most recent, these text bug topics should be on that page. (I created the last one "Scrubby Leading Bug")
Text layer inconsistent property values (new in 13.0.5 / 13.0.1.2)
Photoshop: Font style size problems in CS6
Photoshop CS6: program error from vector tools, multiple text layer font size weirdness
Photoshop 13.0.5 Scrubby Leading Bug in Character Panel (appears after Free Transform of Type)

Issues with selection tools using PS CS6

OK, I'm having issues with selections in Photoshop CC… This video shows my issue (which I never had with CS3). Basically, I go to select an area within an image, and then the selection area disappears, and when I go to move the selection area I am unable to get the selection to "drop". This happens regardless of whether I'm using my wacom tablet or my trackpad. My mac is a 2009 macbook pro running 10.8.5. Updated my OS and wacom tablet with the latest drivers. I've gone into preferences and disabled the GPU, but to not avail. Haven't run into this issue at work using CS6 (but i'm on a windows box there) Any ideas? Any help would be greatly appreciated ;-) http://www.youtube.com/watch?v=FGPla7V9QI8

say, SAKNR is 10 character field and ur appending only 6 characters, then it will give such type of errors normally.
before inserting the data to ur Z table use function module... CONVERSION_EXIT_ALPHA_INPUT

Issue with character formats using duplex printing in smartform

Similar Messages

Maybe you are looking for