Issue : with CIN configuration

Hello frinds
After finishing of cin configuration ,Actualy where do link in fico and start in(FICO) Plz let me know this.
thanks
priyarani
Moderator: Please, respect the rules: don't use SMS language, post in proper forums and the most important SEARCH before posting

Thanks Prasanna/JP
The mistake was from my side. I had not maintained condition records for these condition types.
     JEXT     IN A/R BED total     100.000      %
     JECT     IN A/R Ecess TOT     100.000      %
     JHET     IN A/R S&H eduCesTOT     100.000      %
The values are capturing now in excise invoice.
Thanks and Regards
Adithya

Similar Messages

APEX Listener 1.1.4 install issue with listener configuration

Oracle XE 11gR2
APEX 4.1.1
APEX Listener 1.1.4
Glassfish 3.0.1
=============
Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
Any ideas?

Hi,
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
But perhaps the error disappears as soon as you also get a proper configuration page.
-Udo

Issue with Network configuration - ACS 4113 Appliance

We are having issues with two particular devices. I am trying to remove and add the devices, but when I do a search and go to their IP, I receive.
Failed to edit blahblah.ourdomain.... Reason: The Host no longer exists.
How do I get rid of this so I can readd the devices?
Thanks
Dwane

Yes, ACS SE doesn't support csutil. Please use RDBMS with solution engine and see if that helps.
Creating, Reading, Updating and Deleting AAA clients
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/rdbms_sync.html#wp1011624
Regds,
JK
Do rate helpful posts-

Issue with TableAdapter Configuration Wizard and CASE statements

I am having an issue with using any CASE statements in the select clause for the Table Adapter Configuration Wizard (TCW). I can take any query without a CASE and it will run fine, but inserting any CASE statement in the Select such as:
SELECT
(CASE WHEN :ras_sort = 'D' THEN TO_CHAR(a.TRANS_DATE,'YYYYMMDD')
WHEN :ras_sort = 'C' THEN c.CLAIMDEP_NAME
WHEN :ras_sort = 'A' THEN TO_CHAR(a.ACCOUNT_NUMBER)
END) sort1
FROM xxxx
causes the TCW to error with "error in list of function arguments, 'THEN' not recognized" and several other errors. I have tried with and without parameters in the CASE and have tried both forms of the CASE statement. I have tried multiple queries, all that run with no problem outside of TCW and ODP, but this seems to be a real issue
Is this a known problem and are there any workarounds that will allow use of the TCW?
Thanks,
Dave

Hi Ashish,
perhaps you launch the Web service wizard from the wrong location (i.e. not selecting the SEI you want to use). Did you strictly follow the steps described in the <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/44/f36fa8fd1d41aae10000000a114a6b/frameset.htm">documentation</a> for creating the web service?

Issue with UDMS configuration in SAP PI 7.4

Hi All
I am trying to configure User defined search in AE of SAP PI 7.4
But for some of the interfaces i am facing the issue. I get error stating that Service Interface or Namespace doesnot exist in the set of allowed list.(but SI/Namespace exist in ESR)
This issue is only happening only with few Interfaces not all.
I have followed the below link to configure udms in AE.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/803b22cf-ad75-2f10-0790-da055f2e8c0e?overridelayout=true
Please suggest.
Thanks and Regards
Osman Abdul Aziz Jabri

The surveys functionality was not included for PPC platform in the Service Manager 4.0 release. There was I beleive a technical issue that prevented it from being included. It may be included in a future release.
--Bill

Issue with Site Configuration / Load Balancing

Were noticing strange behavior with our servers that are configured behind a load balancer. Weve got two servers with different ports and a load balancer:
Server1: https://host1:30003/opensso
Server2: https://host2:30103/opensso
Load Balancer: https://loadbalancer:30003/opensso
When we go to the admin console, we can access Server1 without a problem, but the second time we go the load balancer sends us to Server2, and our browser returns a page not found error. Weve traced the HTTP traffic and discovered that every other time we go to the admin console (the load balancers are configured round robin), Server2 always returns a bogus HTTP found URL. The response it provides is something like https://loadbalancer:*30103*/opensso/UI/Login (just an example).
The issue here is that it is properly directing the end users browser to the load balancer DNS entry. It is not however directing the end users browser to the proper port. It seems to sends its own port value to the browser. Obviously when the browser tries to access this URL the Load Balancer rejects the request because it is not listening on port 30103.
Can Multiple OpenSSO application servers (configured as a site) run from behind a load balancer when they are listening on different ports? If so, why is the application server responding to the user request with its own port, rather than that of the load balancer, yet still providing the DNS hostname entry for the load balancer the whole time.

Major updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow.

Issue with iphone configuration utility: eap-tls certificate selection

hello,
I am a new Apple user so if there's anything obvious, please bear with me. I also tried to search in the forum but didn't find any solution.
here's my issue:
I use iphone configuration utility v2.1 for windows. I added 2 certificates(one user cert and one CA cert) under 'credentials'. then i configured one wifi network (eap-tls using the certificate i justed added). then i synced with my phone. everything worked fine so far. however, when I tried to connect to wifi, i got error and found out that iphone was using a certificate issued by IPCU CA instead of the certificate i uploaded.
this behavior could be corrected by manually change the certificate from wireless setting. however, this has to be done every time I try to connect to wireless network which is quite frustrated. a workaround is to email me the certificate and install it from iphone. but i can't install the CA certificate via this way.
i am wondering if anyone has similar issue and how to fix this.
thanks,
-ns

the configuration utility doesn't allow you to select the iPCU cert which is kind of a self signed by the software. you could only select the cert that you imported.
upgraded to ipcu ver 2.2 today and it seems to fix the problem. will monitor it for several days and report back.

Issues with nokia configuration tool 5.0 - E72

I wanted to install a new profile and save the old one for a few people.
Since typing on the PC is much easier, I hoped I could use the configuration tool
After reading the data it lost contact and couldn't find my phone again.
A new try after running PC-Suite 7.1 first:
it finds my phone (with latest firmware) but cannot import / read any data
Any ideas?
By the way: the change language options doesn't work (only English has been installed)

Hi,
I am experiencing similar issue: from PC Suite v 7.1.40.6 I can see the Nokia E72-1 mobile phone, from the Nokia Configuration Tool v 5 I can also see the Nokia E72-1 but from the Configuration Tool I cannot Edit Online the mobile phone and I cannot push a configuration either. This is weird !
Also, wether the phone is connected through USB or Bluettooht, I get the same results.
Anyone has an idea why this happens and how to solve the situation ?
Regards,
Bluea.

HT5437 issues with Apple Configurator 1.3 and provisioning (wifi profiles)

I had a configuration profile which worked well using the previous version of apple configurator. Now with the new version something has changed, so it does not work anymore.
The documentation on how to provisioning a profile to the apple TV is still the same, eventhough the GUI and the procedures have changed in "Apple Configurator". Can you please help me, understanding the changes that have been made to v1.3, in order to properly create and provision the wifi profile to the apple tv, as described here: http://support.apple.com/kb/HT5437
thank you

Have you check the following?
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings
Ensure that your device is using the latest software.
If your issue is still unresolved, perform a software restore in iTune

Issue with VPN configuration in Windows 2008 r2 and 2012 Servers.

Hello ,
I hope you can help me to fix this issue, it's been 5 days since I a, trying to configure VPN in your 2008 and 2012 Servers. On both platform (2008 and 2012) I am getting same error while configuring VPN (after role installation).
"Unable to load C:\Windows\System32\iprtrmgr.dll". So, I have removed IPv 6 entry from the registry and now able to start server (not sure what configuration it took automatically). I tried to disable "Routing
and Remote Access" service and got the same error while enabling "Routing and Remote Access" is running but VPN is still not functioning properly).
I am getting following error,
================================================
Errors under the Event viewer (Remote access)
1) --->> CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user 10.0.0.1\chetan connected from 10.0.0.1 but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password
combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server.
2) ----->> CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user connected to port VPN3-127 has been disconnected because the authentication process did not complete within the required amount of time.
Errors under the Event viewer (Remote access)
3) ---->> Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
================================================
I am using (MS-CHAP v2) + EAP (Authentication Method). Please let me know if you need any additional information.
Thank you,

I Guess this thread is not related to SQL Server .User is facing issue because of network or may be due to OS.I guess I will move this into windows forum.
Moderators please move to Network forum
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Issue with the configuration of http xml port for sending the idoc

Hello,
      I am planning to send multiple idocs in a single file using http xml port.
Presently I am trying to send a single idoc, but am having the issue.
I am trying to create a RFC for HTTP XML port of type H i.e. HTTP Connection to ABAP System
In the how to guide for - How Tou2026 Send Multiple IDocs Within One XI Message
( https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b )
the following parameters are defined for the path prefix -
RFC destination of type H (HTTP Connection to R/3 System).
Specify the path prefix as follows:
/sap/xi/adapter_plain/
?namespace=< your namespace>
&interface=<IDoc_Type>
&service=<Sender System>
&qos=EO (or EOIO).
I am trying to use the following prefix -
/sap/xi/adapter_plain/
?namespace=urn:sap-com:document:sap:idoc:messages ( this is the standard namespace of SAP for all the idocs)
&interface=DEBMAS05 (Idoc type )
&service=SNDLS100 ( ECC system name )
&qos=EOIO
On testing the RFC connection, I am getting the error of page not found.
Can anyone please give me pointers for the issue.
Regards,
Mayank

Thanks Barry!!!
Now I am getting a different message.
In RFC...it is giving me the following message ->
Status HTTP Response     204
Status Text     Body is empty
In case of Idoc, the status is till 02...
the error description for the idoc is --
"When transferring the IDoc by HTTP, the return code with the message '500<SAP:Error><SAP:Category>XIServer</SAP:Category><S' has occurred.
The target address was: http://emgeccsnd1:8001/sap/xi/adapter_plain/?namespace=urn:sap-com:document:sap:idoc:messages&interf
Check whether the IDoc can be sent again.
It is unfortunately not possible to determine automatically whether the IDoc has in fact arrived in the target system and the error occurred afterwards"
I am still not able to resolve the issue.
Regards,
Mayank

Issue with Sound Configuration

What I am doing wrong with my sound / published file?
It has been difficult to find a good video quaality/sound download configuration / Combination:
The video is really good!!
https://skydrive.live.com/redir?resid=1C690B4E4531C4D6!111
Here is the config used:
https://picasaweb.google.com/lh/photo/4h7iQLmk0jR_Y0vcKEp5g9MTjNZETYmyPJy0liipFm0?feat=dir ectlink
I am using a Sony Vaio VPCSA with Windiws 7
Regards

Skydrive wanted me to sign up for download. Try this instead.
https://www.depositfiles.com/en/

Issue with idoc configuration in xMII

Hello,
I have an issue when I try to create IDOC communication between SAP ECC 6.0 and my MII 12.1 system.
Here is the configuration in SM59:
Here is the configuration for XMIIIDOC03 resource adapter in netweaver:
And here is the error message I get:
For information, my MII system is able to ping the SAP ECC server (sap0252.sap.logica.com) and the system number is 00.
Could you please explain what is wrong?
Thanks

Hi again,
I tried all the suggestion and I still have some issues. The network access seems to be solved by adding the gateway service which was missing. But now, I have the Program not registered issue even after trying the procedure given by Henry to force the program registration (I also modified the programID value to force it).
Here is my new configuration:
SM59 :
NWA :
Error:
Could you please have a look?
Regards,

Issue with IDE configuration for creating Webservice from EJB

Hi All,
       I was trying to create a webservice from a EJB(session bean).I executed following steps :
1. I created the bean in one EJB project.
2. Then created another Enterprise Project in whichEJB projects .jar file is included.
3. Now when i right click "ejb-jar.xml" to create a webservice ,webservice wizard
   appears in which Server and WS runtime configuration are set properly.
   But it displays following error message on the top : "Select a service Project Type".
   If i click on the link on the wizard to select a "service Project type" the drop down for the same comes empty.The value for 'Service Project' is already defaulted
as "Webservice Project ".If i go to windows->preferrences->Webservcies->ProjectTopology i found two entries in the service project type list :
                     1.Dynamic Web project
                     2.SAP Web Project
     But there is no entry for Webservice Type project.Can any one help me out
how to solve this issue ?
Thanks and Regards
Ashis

Hi Ashish,
perhaps you launch the Web service wizard from the wrong location (i.e. not selecting the SEI you want to use). Did you strictly follow the steps described in the <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/44/f36fa8fd1d41aae10000000a114a6b/frameset.htm">documentation</a> for creating the web service?

Issue with SMTP configuration

Hi friend's
I have configured SMTP by following the Snote at our workplace.
I am following note 455140 for configuration of e-mail to internet users. I tested by sending messages from SAP to my e-mail address of my own domain and the message arraived without problem, but when I sent a messsage to others(gmail,yahoo) the message finished with the error: Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 Relay rejected for policy reasons.
I tried to find notes but there aren't for this message error.
Pls if u come to know any solution abt this send to me.
I used tcod's SCOT,SICF,SBWP and SOST to comnfig SMTP.
Regard's
Rajkumar.S

As the error message clearly states policy reasons, relaying to external domains must have been blocked. Maybe gmail and yahoo must be first added to the SMTP Inbound controls. It is a guess from my end.
Sameer

Issue : with CIN configuration

Similar Messages

Maybe you are looking for