Issue with context menu for online help?

Try this
1. Start JDeveloper; Choose Help | Table of Contents and make it visible in Navigator
2. Close JDeveloper and start it again
3. Try right clicking on a help node in the Help tab in Navigator. the context menu does not appear until you choose Help | Table of Contents again.
Is this expected behavior?

Can you specify what release you are using when you run into this problem? This is a bug, not expected behavior.

Similar Messages

Context menu for .exe and .lnk slow becaus of nv3dappshext.dll

Hi
I recently made a fresh install of Windows 7 and I'm now noticing that the context menu for .exe and .lnk files opens very slow. With the help of ShellExView it looks like it is caused by C:\Windows\system32\nv3dappshext.dll. If i disable nv3dappshext.dll the
problem goes away. So my first try was to reinstall all Nvidia drivers but that didn't help. I'm now thinking that there is some other file that makes nv3dappshext.dll corrupt.
Is there anyone here that might know what's wrong?
//Simon

Hi Simon, did you keep this disabled? Did you report to NVID.support?
NVIDIA are as bad as Microsoft are as bad as Intel, all kinds of application errors (going for the cleanest build on the planet :) so, given that I don't
have
any 3D-ready devices (ergo)
any superfluous NVIDIA programs*
the DISPLAY DRIVER's all I need, and still I get app issues (recently, disconcertingly, the ominous,
snail-mode 'Kernel Processing Power' event (cores are disabled because of some event/temp?)
BSOD/Shell Crash when extending display to AOC 2036 monitor @ 1920x1080, not gaming!
FIXED by installing NVIDIA's 'system tool' {nTune} (THANKS!!! to Haider
Ali Khan for the tip! TdrDelay QWORD:8 failed to fix, almost bought a new AC Adapter!)
New nTune issues now being monitored....
* Custom install NVIDIA, only select the driver if you're not a gamer, sterescopic not
{yet} required if you're in 2D, Physx Engine only for Steam(online) gamers,
HD AUDIO not required (if you've also got HD Intel doing that for ya :D
I will fix NVIDIA's and Microsoft's mistakes :D I might even upload my (native virtualised) build when done. It's so slick, so nice to have a tool that works, and one that can keep up with your imagination!)

Context menu for toolbox shows wrong menu

when itunes is open, right-clicking on anything in the toolbar (the stuff with the little clock) results in the context menu for the whole toolbar coming up as well as the context menu for whatever i'm clicking on. unfortunately the toolbar one comes up on top so it's super annoying. however, if i wait for the tooltip to show up before right-clicking, it only shows the correct context menu. i think this is just a bug, but does anyone know a fix?

Hi Peter,
If you are using Enterprise Portal to publish those reports to be viewed by the user, i think ur problem may get solved in EP itself. Contact ur EP associate and find out whether it is possible to do this or not. Hope we can do it in that. Otherwise you need to write some JAVA code in WAD which helps in not getting the display as such.
Assign points if this helps u...
Regards,
Koundinya Karanam.

I have an issue with disappearing option for 1920x1080 in Preferences / Displays.

Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080. This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
I have tried:
Power down Monitor & restart
Shutdown & restart
Shutdown & restart in Safe Boot Mode (options same in Prefs)
Power down Monitor & restart in Safe Boot Mode
Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
Udated Pram
I am now at a loss, I guess I could try a recovery, and download/install Mavericks again, but do not wish to do this if I can help it.
I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
Anyone out there have any ideas, please.

Back up all data. Quit System Preferences if it's running.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Preferences/ByHost
In the Finder, select
Go ▹ Go to Folder...
from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
Test.

Context menu for tree node cannot be accessed in IE 8 (Jdev 11.1.2)

We use an af:tree with context menus for performing operations on each node. In IE 8 when you hover over a node before right clicking, "tooltip" text appears which basically just re-displays the text of the node. Even though the tooltip text is annoying, the context menu worked fine in 11.1.1.4, but now in 11.1.2 when you right-click on that tooltip text you get the "normal" browser context menu for text -- we no longer get our custom context menu.
You can see this same problem on the tree in the rich faces demo: http://jdevadf.oracle.com/adf-richclient-demo/
Sometimes, if you're quick enough, you can get the custom context menu to work, but it seems that once you've hovered long enough over one node to get the standard context menu, you're stuck and any node you click on will display the browser's normal context menu.
This is a big problem for us because we rely on these context menus and most of our administrative users are on IE 8. Is there a workaround or can the tooltip text somehow be shut off? It doesn't appear in Firefox so Firefox works fine.
Thanks.
-Ed

Hi,
if this works on IE 7 you can force the app to run in IE7 compatibility mode
See "Run ADF Faces applications with IE 9 in IE 8 compatibility mode" http://www.oracle.com/technetwork/developer-tools/adf/learnmore/april2011-otn-harvest-367335.pdf
Works the same for IE8 to IE7. This then gives you a solution for until the issue is solved
Btw.: If users click onto the folder icon (not the text, which brings up the tool tip) then the context menu work. I'll file a bug anyway
Frank

Does anyone use RH7 for online help on their websites?

Hi,
I'm finding that this product isn't usable for online help
within a website. Using the RH_ShowHelp() JavaScript calling
convestions triggers popup blockers on most of the major platforms
(Windows/IE, FF, Mac/FF). I don't understand why this is happenning
since the help and the page that links to the help are in the same
domain. Requiring customers to manually reconfigure their popup
blockers is not a viable solution.
On the one where it works (Mac/Safari) I'm left with a very
tiny window in the lower right corner. Expanding it shows the help,
but the page in the content pane is the file-not-found page
(clicking items in the navigation brings up the correct page). I'm
also seeing on the Mac (FF & Safari) that the Index &
Search areas aren't searchable like they are in Windows (no input
box to search with).
When we asked Adobe about this the answer was more or less -
"that's how it works" and they gave us a link to the following page
detailing the limitations by browser (notice that it hasn't been
updated since 2004 and the newest IE is IE4).
http://kb.adobe.com/selfservice/viewContent.do?externalId=rb_69353b&sliceId=2
I was hoping there would be a new RoboHelp_CSH.js file (it's
dated 2004) Ideally one that didn't rely on browser sniffing but
instead checked for JavaScript capabilitites.
We missed testing this part when evaluating the product and
now it feels like a dead end.
Needless to say we've started moving on to other help
systems, but maybe someone can help save RH for us before we write
it off completely.

Welcome to our community, wjens
Hopefully you realize that you aren't forced to use the
WebHelp API to establish links to help.
Take a look at the following links:
Link
one
Link
two
Hopefully something here helps... Rick

How to deactivate the context menu for data cells in web reports

Hello,
we would like to have the data cells (for example: values in euro) without context menu. I mean, right now, when users navigate in web reports and stop with a mouse over the data cell, text like "Context menu for 5.000 Highlighted" appears. Especially users don't want to see the exception cells with this information like
"Context menu for 6.000 critical 4".
Is it possible to deactivate this context info?
Thanks and Regards,
Nuran Adal
Message was edited by: Nuran Adal

Hello Nuran,
I guess you want to disable the Tooltip and not the ContextMenu. Anyway, use the table interface for it.
Have a look at paramter C_CELL_CONTENT
In Method DATA_CELL.
This one contains strings like:
30,0
Rebuild this String to:
30,0
Kind Regards,
Alican

Finder.app restart when work with context menu

After upgrade from Mac OS X 10.6.8 to Mac OS X 10.8.2 Finder.app work with crashes.
When I try use context menu (for example Git Info on File or Folder) Finder.app restart every time.
Process:         Finder [439]
Path:            /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier:      com.apple.finder
Version:         10.8.1 (10.8.1)
Build Info:      Finder_FE-808001006000000~2
Code Type:       X86-64 (Native)
Parent Process: launchd [304]
User ID:         502
Date/Time:       2013-01-07 03:51:54.679 +0400
OS Version:      Mac OS X 10.8.2 (12C60)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (Code Signature Invalid)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
Performing @selector(cmdShowStaticInfo:) from sender TContextMenuItem 0x7f9911b4b540
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.finder                    0x000000010c553121 0x10c4b9000 + 631073
1   com.apple.finder                    0x000000010c5b60a6 0x10c4b9000 + 1036454
2   com.apple.finder                    0x000000010c5b5fe2 0x10c4b9000 + 1036258
3   com.apple.finder                    0x000000010c5afbc8 0x10c4b9000 + 1010632
4   com.apple.finder                    0x000000010c5ae500 0x10c4b9000 + 1004800
5   com.apple.finder                    0x000000010c5adc16 0x10c4b9000 + 1002518
6   com.apple.finder                    0x000000010c5adae2 0x10c4b9000 + 1002210
7   com.apple.finder                    0x000000010c50d9f4 0x10c4b9000 + 346612
8   com.apple.AppKit                    0x00007fff90b80a59 -[NSApplication sendAction:to:from:] + 342
9   com.apple.AppKit                    0x00007fff90cb644c -[NSMenuItem _corePerformAction] + 406
10 com.apple.AppKit                    0x00007fff90cb613a -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 133
11 com.apple.AppKit                    0x00007fff909a346f -[NSMenu _internalPerformActionForItemAtIndex:] + 36
12 com.apple.AppKit                    0x00007fff909a32f7 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 135
13 com.apple.AppKit                    0x00007fff90caf245 NSSLMMenuEventHandler + 342
14 com.apple.HIToolbox                 0x00007fff9a646f0a DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1206
15 com.apple.HIToolbox                 0x00007fff9a6463d9 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 410
16 com.apple.HIToolbox                 0x00007fff9a65c1bd SendEventToEventTarget + 40
17 com.apple.HIToolbox                 0x00007fff9a692e89 SendHICommandEvent(unsigned int, HICommand const*, unsigned int, unsigned int, unsigned char, void const*, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) + 443
18 com.apple.HIToolbox                 0x00007fff9a637c11 SendMenuCommandWithContextAndModifiers + 59
19 com.apple.HIToolbox                 0x00007fff9a637bc3 SendMenuItemSelectedEvent + 254
20 com.apple.HIToolbox                 0x00007fff9a637a4f FinishMenuSelection(SelectionData*, MenuResult*, MenuResult*) + 94
21 com.apple.HIToolbox                 0x00007fff9a7ae009 PopUpMenuSelectCore(MenuData*, Point, double, Point, unsigned short, unsigned int, Rect const*, unsigned short, unsigned int, Rect const*, Rect const*, __CFString const*, OpaqueMenuRef**, unsigned short*) + 1673
22 com.apple.HIToolbox                 0x00007fff9a7ad924 _HandlePopUpMenuSelection7 + 629
23 com.apple.AppKit                    0x00007fff90d3261b _NSSLMPopUpCarbonMenu3 + 3916
24 com.apple.AppKit                    0x00007fff90d316a8 -[NSCarbonMenuImpl _popUpContextMenu:withEvent:forView:withFont:] + 189
25 com.apple.AppKit                    0x00007fff90e8c063 -[NSMenu _popUpContextMenu:withEvent:forView:withFont:] + 200
26 com.apple.finder                    0x000000010c6ca616 0x10c4b9000 + 2168342
27 com.apple.finder                    0x000000010c6c8498 0x10c4b9000 + 2159768
28 com.apple.finder                    0x000000010c72c054 0x10c4b9000 + 2568276
29 com.apple.finder                    0x000000010c726dc5 0x10c4b9000 + 2547141
30 com.apple.AppKit                    0x00007fff90b75c81 -[NSWindow sendEvent:] + 8504
31 com.apple.AppKit                    0x00007fff90b71744 -[NSApplication sendEvent:] + 5761
32 com.apple.finder                    0x000000010c64db71 0x10c4b9000 + 1657713
33 com.apple.AppKit                    0x00007fff90a872fa -[NSApplication run] + 636
34 com.apple.AppKit                    0x00007fff90a2bcb6 NSApplicationMain + 869
35 com.apple.finder                    0x000000010c4beb46 0x10c4b9000 + 23366
36 libdyld.dylib                       0x00007fff988ea7e1 start + 1

I solve problem - CMD + R -> Reinstall Mac OS X (but reason of crashes not found)

Table Context Menu for Word 2010

I want to create a context menu for Word 2010. I'm using the code below, that works fine if I'm entering text, but menu doesn't show when entering text inside a table cell.
I tried also the following contextMenu idMso: ContextMenuTable, ContextMenuTableCell, ContextMenuTableCellWhole, and ContextMenuTableCellWholeLinked; but still doesn't work.
What am I doing wrong? Thanks.
XML:
<contextMenus>
<contextMenu idMso="ContextMenuText">
<menuSeparator id="CMenuSeparator1" />
button id="BtnCMenu1" label="Block Text" imageMso="TextToolMenu" visible="true" onAction="StyleBlockText" />
</contextMenu>
</contextMenus>
VBA:
Sub StyleBlockText(control As IRibbonControl)
Selection.Style = ActiveDocument.Styles("My Style")
End Sub

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, you'd better post your question to the MSDN forum for Word
http://social.msdn.microsoft.com/Forums/en-US/home?forum=worddev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

Context menu for customized selfwritten VI

Hallo!
Maybe someone knows and has time to share: is it possible to create a customized popup/context menu for a customized - self written VI (vide .jpg)? And as working with LV 2011 I have realised it's impossible to create a polymorphic VI out of other polymorphic vi-s right? If anybody knew any walk through, I will be thankfull
A.

Dear Aleph,
information about creating run time context menus can be found here: http://www.ni.com/white-paper/3171/en/
Another soultion, is to create your own VI that will po up when a user uses his RMB on a specific object. This can be achieved by properly using the Event Structure. Let me know if you need more information.
What do you mean by creating a polymorphic VI from a polymorphic VI?
Best regards,
Mateusz Stokłosa
Applications Engineer
National Instruments

Is there any way to edit the standard Firefox context menu for displayed Web pages?

Is there any way to edit the standard Firefox context menu for displayed Web pages? I frequently want to save a picture appearing on a page. Sometimes I "slip" and hit "Send Image" when I want "Save Image As", and have to sit and wait for a default send-mail page to come up, then close it, fiddling with its "are you sure" dialogs. This is a painful way to handle a slip-up. I basically NEVER want to e-mail an element directly from a page. Is there any way I can just delete "Send Image" from the context menu?

You can remove entries in the context menu with code in the userChrome.css file
*http://kb.mozillazine.org/userChrome.css
Some IDs are listed in this MozillaZine Knowledge Base article:
*http://kb.mozillazine.org/Chrome_element_names_and_IDs
To find the ID of others you will have to use the DOM Inspector.
* https://support.mozilla.org/kb/DOM+Inspector
* https://developer.mozilla.org/En/DOM_Inspector
* https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
* DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

In Firefox 4, how do I get back the context menu for the drop down list of the Location Bar so I can Open Link in New Tab, which I did often in FF 3?

Firefox 3 has a context menu for the drop down list of
the Location Bar. One option on this menu I used often
is "Open Link in New Tab" -- quite convenient.
This context menu has disappeared in Firefox 4.
Can I get it back?

See also:
*Tools > Options > Privacy > History: "Remember search and form history"
*https://support.mozilla.org/kb/Form+autocomplete
The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings.<br />
Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br />

Remove Context Menu for KM Content for Anonymous User

Hi All,
I have implemented External Facing Portal and i have to show KM documents
on Anonymous user home page. For This I have created JSP page and have
created url iview for this created JSP application. On this JSP page to access
KM i have used below code
<iframe src ="/irj/go/km/navigation/documents/Public%20Documents" > </iframe>
Now i am able to see the KM Contents of Public Documents on my Anonymous
user Home Page .But here i need to remove the context menu for KM Content
for Anonymous User , but the context menu should come for Logged in user.
How to do this ??
Regards,
Piyush

solved

How to create Context Menu for Full Screen ALV

Dear Experts,
Please tell me the procedure to create Context Menu for ALV Grid (full screen ALV using SLIS ).
Regards
Arnab

Hi,
Check the demo program BCALV_GRID_06

I need a request code for offline activation. Because i cannot connect with adobe server for online activation. But I receive "The request code is invalid." by generate answer code.

I need a request code for offline activation. Because i cannot connect with adobe server for online activation. But I receive "The request code is invalid." by generate answer code.

Dear Anubha,
I hope these windows illustrate what I am facing.
The above window shows the prompt that the software requires activation.
The version is 8.1.0.
This next window is the point where I select activation by phone.
This final window shows that the "response code" is not returned. I get an
"Activation Number" instead.
Steven
On Tue, Jan 27, 2015 at 10:50 PM, Anubha Goel <[email protected]>

Issue with context menu for online help?

Similar Messages

Maybe you are looking for