Issue with Corrective Action Deletion Log

Hi
I am working on Corrective Actions of Audit Management. Whenever a Corrective Action is deleted, none of the related tables stores the deleted information. You can not retrieve historical data from tables once a corrective action is deleted. Unlike some other activities, there is no deletion flag set. Instead the record is removed from all the related tables. Is there any other way to retrieve the deleted records information from tables?
Thanks and Regards
Murali

Hi,
Better you can manage archival & deletion of audit components using some preprocessing programs
For instance PLM_AUDIT_ARC_AUD_DELETE.This will give you the detailed log.
Please check SARA transaction for the set up.
REgards
Keerthi

Similar Messages

Issue with folder action created with automator

Hello all,
I'm having an issue with folder actions that i created with automator and it's driving me crazy. Apple says they can't help with things created by the user so this is my only shot at figuring this out.
Running a Mini 2.3G quad i7, 8GB ram on OSX Mavericks 10.9.2
My goal is to set up an action to add text to the filename of a file placed into a particular folder. So I open automator and choose folder action. Then I choose the folder I want the action applied to at the top. Then I go to Files and Folders in the library and choose rename finder items and drag it over to the workflow. I select add text, then add the text I want added to the file name and choose before name because I want the added text to preceede the original filename text. I save it then go to the folder I applied it to and right clikc go to services then folder actions and verify that the service is attached to that particular folder and it is.
Should work right? No. When I place a file in that folder the action runs and adds the text like I want it to... but then it starts to add it over and over again in an infinite loop. It also adds a file with the extension .ds_store to the folder that also has the name added over and over.
I've tried deleteing all the folder actions and even deleteing all the folder actions themselves saved by the automator in the workflow file in the user library.
I'm stumped... no idea what to do. A while ago I had used the automator to batch rename files and it worked perfectly. I tried the same steps i listed above to set this action up on a machine in an Apple retail store and it worked... so I know I have the set up right.
Any help is greatly appreciated.
Thanks,
Justin

Hi JK257
This is why it happens:
The folder action is looking for new items in the folder. You drop in a file called "File1". So it renames it "sometext File1". Then it sees this new file called "sometext File1" and thinks "Hey, this is a new file - I'll call it 'sometext sometext File1' because I have to rename every new file." Then it sees this new file called "sometext sometext File1" and thinks...
You get the picture.
(the .ds_store is a normally hidden database file which is getting revealed by the same process.)
The solution is to move the files out of the renamer folder into a receiving folder after they have been renamed:
Hope this helps,
H

Issue with backing up Archive logs

Hi All,
Please help me with the issues/confusions I am facing :
1. Currently, the "First active log file = S0008351.LOG" from "db2 get db cfg for SMR"
    In the log_dir, there should be logs >=S0008351.LOG
    But in my case, in addition to these logs, there are some old logs like S0008309.LOG, S0008318.LOG, S0008331.LOG etc...
    How can I clear all these 'not-really-wanted' logs from the log_dir ?
2. There is some issue with archive backup as a result the archive backups are not running fine.
    Since this is a very low activity system, there are not much logs generated.
    But the issue is :
    There are so many archive logs in the "log_archive" directory, I want to cleanup the directory now.
    The latest online backup is @ 26.07.2011 04:01:04
    First Log File      : S0008344.LOG
    Last Log File       : S0008346.LOG
    Inside log_archive there are archive logs from S0008121.LOG   to   S0008304.LOG
    I wont really require these logs, correct ?
Please clear my confusions...

Hi,
>
> 1. Currently, the "First active log file = S0008351.LOG" from "db2 get db cfg for SMR"
>     In the log_dir, there should be logs >=S0008351.LOG
>     But in my case, in addition to these logs, there are some old logs like S0008309.LOG, S0008318.LOG, S0008331.LOG etc...
>     How can I clear all these 'not-really-wanted' logs from the log_dir ?
>
You should not delete logs from log_dir because there online Redo logs and if you delete then there will be problem in start of db.
> 2. There is some issue with archive backup as a result the archive backups are not running fine.
>     Since this is a very low activity system, there are not much logs generated.
>     But the issue is :
>     There are so many archive logs in the "log_archive" directory, I want to cleanup the directory now.
>     The latest online backup is @ 26.07.2011 04:01:04
>     First Log File      : S0008344.LOG
>     Last Log File       : S0008346.LOG
>
If your archive logs are backed up from log_archive directory then you can delete old logs.
Thanks
Sunny

MGE - issues with pers. actions for delegation in ECC6.0 - management of global employees

Hi experts,
during implementation of MGE at my client we are facing issues with the personnel actions for delegation.
We were using the standard actions as follows, without success.
action Expatriation planning (81), IG 92 via PA40 --> new persno. has been created successfully, empl. status has been set to withdrawn, IT715 "host" has been set to "planned", IT710 has been filled (required fields only, no admin, no manager, no sending pers. assignment info), all payroll relevant ITs have been skipped (706 + 707)
IT715 has been set to "to be activated" via PA30
running of report RPMGE_Activation for newly created persno.(assignment nr), pers. action 82 Activation in host country, IG GE --> following ISSUES occure:
Action can not be executed via PA40 (is this normal behaviour?)
when running with report, employm. status changed to active
IT715 "host" has not been changed updated in status (should have been updated to "in progress", right?)
IT715 "home" has not been created (correct?)
IT710 has not changed
Background information:
> Switch MAINS is activated
> We are not going to use global payroll! No switch has been activated. Payroll will always run in home country, so the client does not want to use any of the py relevant ITs dealing with global employment.
Many thanks + best wishes,
Evelyn

Hi experts,
short update on our issue:
After several times of trying the same thing, the report worked out fine as it should for 82 and also in the next step for 83. IT715 is going to be updated correctly. We need to work with the report and not with PA40.
Some open questions remain:
- Set home assignment to active during delegation (not to inactive for payroll reasons in home country)
Documentation for RPMGE_Activation says
Home Activation (Active) (84)
Same process as described above, excpet that in the third step, the Employment Status field in infotype Action (0000) is set to Active if there are any trailing payments in the home country.
We understand that 84 is identical to 83 but employment status is different.
For action 84 a different IG is underlying (93) than for 83 (GE) and also it is called "Change expat.planning". The Action does not seem to work with the report as well.
>> Is this correct? Do we need to create our own Home Activation (Active) Action by coping 83, changing the employment status setting?
How do we need to configure Feature ACTCE then? EXPATACTHOME would need to have 2 entires at the end, no?
- End of delegation
Which actions are used for end of delegation? Are there standard once that we could not find?
We would like to set the host country to withdrawn and the home country back to active (also change of employee group in this case).
Also using the logic of IT715, is there any automatic way of changing the host country record to status completed, or would we use an exit action, including IT715 and set status manually?
Same question for home country.
Many Thanks,
Evelyn

Performance issues with dynamic action (PL/SQL)

Hi!
I'm having perfomance issues with a dynamic action that is triggered on a button click.
I have 5 drop down lists to select columns which the users want to filter, 5 drop down lists to select an operation and 5 boxes to input values.
After that, there is a filter button that just submits the page based on the selected filters.
This part works fine, the data is filtered almost instantaneously.
After this, I have 3 column selectors and 3 boxes where users put values they wish to update the filtered rows to,
There is an update button that calls the dynamic action (procedure that is written below).
It should be straight out, the only performance issue could be the decode section, because I need to cover cases when user wants to set a value to null (@) and when he doesn't want update 3 columns, but less (he leaves '').
Hence P99_X_UC1 || ' = decode(' || P99_X_UV1 ||','''','|| P99_X_UC1 ||',''@'',null,'|| P99_X_UV1 ||')
However when I finally click the update button, my browser freezes and nothing happens on the table.
Can anyone help me solve this and improve the speed of the update?
Regards,
Ivan
P.S. The code for the procedure is below:
create or replace
PROCEDURE DWP.PROC_UPD
(P99_X_UC1 in VARCHAR2,
P99_X_UV1 in VARCHAR2,
P99_X_UC2 in VARCHAR2,
P99_X_UV2 in VARCHAR2,
P99_X_UC3 in VARCHAR2,
P99_X_UV3 in VARCHAR2,
P99_X_COL in VARCHAR2,
P99_X_O in VARCHAR2,
P99_X_V in VARCHAR2,
P99_X_COL2 in VARCHAR2,
P99_X_O2 in VARCHAR2,
P99_X_V2 in VARCHAR2,
P99_X_COL3 in VARCHAR2,
P99_X_O3 in VARCHAR2,
P99_X_V3 in VARCHAR2,
P99_X_COL4 in VARCHAR2,
P99_X_O4 in VARCHAR2,
P99_X_V4 in VARCHAR2,
P99_X_COL5 in VARCHAR2,
P99_X_O5 in VARCHAR2,
P99_X_V5 in VARCHAR2,
P99_X_CD in VARCHAR2,
P99_X_VD in VARCHAR2
) IS
l_sql_stmt varchar2(32600);
p_table_name varchar2(30) := 'DWP.IZV_SLOG_DET';
BEGIN
l_sql_stmt := 'update ' || p_table_name || ' set '
|| P99_X_UC1 || ' = decode(' || P99_X_UV1 ||','''','|| P99_X_UC1 ||',''@'',null,'|| P99_X_UV1 ||'),'
|| P99_X_UC2 || ' = decode(' || P99_X_UV2 ||','''','|| P99_X_UC2 ||',''@'',null,'|| P99_X_UV2 ||'),'
|| P99_X_UC3 || ' = decode(' || P99_X_UV3 ||','''','|| P99_X_UC3 ||',''@'',null,'|| P99_X_UV3 ||') where '||
P99_X_COL ||' '|| P99_X_O ||' ' || P99_X_V || ' and ' ||
P99_X_COL2 ||' '|| P99_X_O2 ||' ' || P99_X_V2 || ' and ' ||
P99_X_COL3 ||' '|| P99_X_O3 ||' ' || P99_X_V3 || ' and ' ||
P99_X_COL4 ||' '|| P99_X_O4 ||' ' || P99_X_V4 || ' and ' ||
P99_X_COL5 ||' '|| P99_X_O5 ||' ' || P99_X_V5 || ' and ' ||
P99_X_CD || ' = ' || P99_X_VD ;
--dbms_output.put_line(l_sql_stmt);
EXECUTE IMMEDIATE l_sql_stmt;
END;

Hi Ivan,
I do not think that the decode is performance relevant. Maybe the update hangs because some other transaction has uncommitted changes to one of the affected rows or the where clause is not selective enough and needs to update a huge amount of records.
Besides that - and I might be wrong, because I only know some part of your app - the code here looks like you have a huge sql injection vulnerability here. Maybe you should consider re-writing your logic in static sql. If that is not possible, you should make sure that the user input only contains allowed values, e.g. by white-listing P99_X_On (i.e. make sure they only contain known values like '=', '<', ...), and by using dbms_assert.enquote_name/enquote_literal on the other P99_X_nnn parameters.
Regards,
Christian

Captivate 8 - Issues with correct recording of Software Simulations in monitor 2 (of 2)?

I've been recording Software Simulations in monitor 2 (screen 2 of 2) and an application in monitor 2 to produce automatic demo, assessment and training output. It should be possible but the system doesn't capture all recordable actions (the result is 1 slide for each of demo, assessment and training versions with the ‘final’ screen view and one mouse movement). However if I shift my recording area to screen 1 (i.e. monitor 1) there are no issues. It can be worked around, however is there some other set-up option I'm overlooking?
Thanks in advance for any input.
Jenny

Thank you so much for posting your question. I would have never stopped to think that which screen I was trying to record might make a difference. I was having huge issues with a software simulation not capturing all the necessary screen changes (on Monitor 2), but after reading your post, I moved it to Monitor 1, and it's working as it should again.
You just saved me lots of frustration.

Issue with correct trajectory reading using Labview and Compumotor

Hi everyone,
I am having some issues with my compumotor/Labview communication and was wondering if anyone had any advice.
My setup is a National Instruments PCI-7432 control board linked to a
UMI-7762 Interface board then I have my driver and motor, the Compumotor
M83-135 R14, serial 18054. When I use the NI Measurement and Automation Explorer and tell it to go at a velocity, the velocity is no where near the commanded value.
It is not returning any errors either, I’ll tell it to do say 500 rpm’s and it will take ~2.5 seconds to make a complete revolution. I can get the motor to spin at a very fast rate so it is working, I just was wondering if there was something wrong that would cause it to deviate so far off the assigned velocity.
I didn't know if I accidentally changed a setting with labview that would cause it not to read the velocity correctly or something like that.
Thank You
Keith Kirkwood

Keith,
It sounds like one possible issue is that your feedback is not correct. In which case you'll want to check encoder feedback -- disable your motor in software but leave everything connected. Then manually turn the motor and check if the 1-D Interactive section in MAX reports the correct steps per one revolution. If not, then check that the encoder setup section is correct, specifically the encoder counts per revolution.
Also, your motor may need to be tuned, assuming that it hasn't already been tuned. Is your motor a servo or stepper motor? From what I could find online it looks like the M83-135 is probably a servo. Here are a couple links to documents that will help you tune your motor, which often solves velocity issues:
Understanding Servo Tune
http://zone.ni.com/devzone/cda/tut/p/id/2923
And if that seems not to work,
Unable to Tune a Servo Motor
http://digital.ni.com/public.nsf/websearch/19668AB2D4997F3D86256E940082F1EF?OpenDocument
Let me know how it goes, or if you have more questions. Thank you.
-Allison S.
Applications Engineering
-Allison S.
Calibration Services
Product Support Engineer

Calendar Sync Issue With repeating entry deletions Notes 8.5 to BB

I have an issue where when synchronizing may calendar with Lotus Notes version 8.5, the Blackberry will delete repeating entries. Specifically, if I load the Blackberry with all my calendar entries from Notes and then in one entry in my Notes calendar a "single" occurance of a meeting gets canceled .. the next time I sync with the Blackberry it deletes "all" occurances of that meeting from the BB. The entries remain correct on Lotus Notes. The only way I can seem to fix that is to reset sync setting and reload the calendar to the BB all over again, and then this occurs again .... this happens with both V5 and V6 of the BB Desktop Software. Has anyone seen this and is there a fix ?

I have an issue where when synchronizing may calendar with Lotus Notes version 8.5, the Blackberry will delete repeating entries. Specifically, if I load the Blackberry with all my calendar entries from Notes and then in one entry in my Notes calendar a "single" occurance of a meeting gets canceled .. the next time I sync with the Blackberry it deletes "all" occurances of that meeting from the BB. The entries remain correct on Lotus Notes. The only way I can seem to fix that is to reset sync setting and reload the calendar to the BB all over again, and then this occurs again .... this happens with both V5 and V6 of the BB Desktop Software. Has anyone seen this and is there a fix ?

Issue with emails being deleted from my Yahoo mail folders

Hi, I am experiencing an issue where emails are being deleted from my Yahoo mail folders when the weekly Sunday night purge of the Yahoo Trash folder is carried out by Yahoo. These are mails that have been moved from my inbox via the iphone mail app.
I have a similar problem with Outlook 2010 on my laptop but not with Outlook 2003 on my desktop.
When I move the emails from my inbox I have noticed that using Outlook 2003, the moved email is left in my inbox in "strikethrough" mode whereas on Outlook 2010 it is deleted from my inbox. I subsequently purge the marked email from my inbox in 2003.
I am able to see and access the emails in the folder I have moved them to until after midnight on Sunday when they dissappear. The emails moved via 2003 are ok and not lost.
Funnily enough when using an earlier version of the iphone mail app I remember that I could see emails in "strikethrough" mode in Outlook 2003 when they had been moved via the iPhone mail app but you don't see that now.
It feels like some sort of pointer issue to me ...... any ideas on how to stop this happening?.

This is now fixed !!!! I am not sure how though :-((
I reported the problem to Yahoo and in the process of them investigating the issue my sub-folders suddenly became invisible via my IMAP connection and then also were invisible on-line following a log out and a log in. After my initial panic, I contacted Yahoo who were able to restore my complete account. Since then, the problem has gone away.
I have been testing this for two weeks and all is working perfectly from whatever device I use to connect to my mail (IMAP or via my browser).
Phew!

Issue with Consolidate Action through Batch Process

We find that when "Load" reports an error, "Consolidate" does not fire - only from Batch. When processing manually, Consolidate fires regardless of Load errors.
We are using an Essbase load rule that results in records continuing to be loaded, when there are kickouts. So, the Essbase API is returning an error code to FDM [that's fine].
We want to run a calc script whether or not the load errors.
Again, with a "manual" process - no problem. But Batch stops prior to firing Consolidate.
We checked the Batch flag - we set it to "10" (Consolidate) and even "12" (Check).
Any thoughts?
We are trying to avoid altering the Load Action code to execute the Essbase calc within that code set.
Any inputs regarding this issue would be greatly appreciated.
Thanks

Thanks for responding back. I have seen the link before.
We have HR_PL_ADMINISTRATOR_000 role. The role has P_ASRCONT P_ORGIN and P_PERNR object. Object P_ORGIN needs to be set as
Authorization level            Read
Infotype                           *
Personnel Area                *
Employee Group              *
Employee Subgroup         *
Subtype                           *
Organizational Key            *
in order to show the Hire Process in execute hiring link on the Portal. If we put a restriction on personal area, we do not see the Hire process on the execute hiring on the portal.
Kindly advice.
Thanks,
Gowri

Issue with correct slide background not displayed

I am experiencing problems when publishing content captured from a simulation apart from the really annoying cursor ghosting when playing back typed text and the red screen of death and ghosting from previous slides when scrolling
I am now getting a completely different background on the published and previewed through browser slide to the background the unpublished slide is designed to show I have of course checked the timeline for hidden overlays and have also dragged the background from the library over the existing background to see if that cured it but no it still shows a background that is present in the library but is nowhere on the slide
the 2 slides either side play and look correct
The slide is also displayed correctly when previewed using "from this slide" it is only when published or through browser that the problem occurs
Strikes me that some of these issues are well past the time they should have been sorted I am begining to lose confidence in what should be a good tool but needs to be far more reliable
what with giving hackers my credit card details Adobe seem to be sliding and I am gueesing it is because they are getting greedy and quality is taking a back seat
Everything is getting so buggy Acrobat Pro, Photoshop etc all getting very unreliable I work in a large training dept for a majopr co and I am seeing issues on all different machines and OS so it is not just my machine

Hi Rod
Thanks for your reply
I have tried all the supposed fixes
Inc changing quality of slides to 24 bit and no compression
Maintain slide quality and not maintain slide quality, reducing size of file, export background to photoshop reimport jpg
With mixed results, I would just like your product to do what it says it will
The only way I have found to eradicate this problem and the others mentioned is to remove any fmr from the content
I have checked for proxy cache republished in 3 versions of flash sometimes have got different results but all unacceptable
I also note many others have had same problem without resolve
Can you please halt development on new products until you resolve problems that have persisted across several versions
I am also experiencing the close browser problem which I have solved by adding Javascript but surely you with your resources could do this for your
Customers who pay very good money for your products
I didn’t think I was buying a do it yourself kit
Regards Chris Lord

Project Server 2010 - Issue with correct recording of timesheet actual hours with decimals

We have Project Server 2010 and are using the timesheet functionality for recording resource times/costs in the schedules.
It has come to light only recently, that for one user, suddenly the times she is entering are not being summed up correctly. An image of her timesheet and the manage timesheet screens are shown below. Note she entered 9.5 hrs but the total that
appears in the manage timesheet screen is 9.514hrs.
If you look at the history of the previous weeks as well, the weird change toi the total hours has occurred in the previous 4 weeks as well. I have no idea why this has started happening and am not aware of any change to the resource's details (apart
from a change to her hourly rate).
Has anyone experienced this before?
Thanks
Peter

We have this issue and are past the patch that discussed decimal rounding (April 2014, though it was more related to the application of resource rates). This seems different from that noted rounding problem.
We have at least three users (out of 625) that have this problem every week and it isn't always the same users. If we re-enter the time and zero fill the cells for the problem task it will fix it.
It is almost like when a user deletes a value that it is leaving residual numbers in the field.
Our 2010 server version below which is through Sept 2014 CU:
14.0.7132.5000
Any help on this would be appreciated.
Thanks!

Is anyone having issues with their phones deleting their notes randomly? Also when you delete an email, you have to delete up to 5 times sometimes before it actually deletes from your phone?

I can make a note and It deletes it, sometimes a week later sometimes 3-5 weeks later. BUT there's 1 note I've had for about 9 months and it's still there. I've had it since before the new iOS 7 system... And with the emails I can delete then and then they pop back up, delete again and there they are again. But it's not all the time. Just whenever it feels like it. And my phone isn't old, I've only had it about 3 months now. Is anyone else having these issues? They're driving me nuts!

Give it a go
Hold the cmd key (next to the spacebar) & try clicking a few messages. Command key looks a bit like a cloverleaf.
There are other shortcut keys as I mentioned before just try a few key combinations & you'll get the hang of it.
Once the messages are selected you can either drag them into a Mailbox or use the menus to perform operations like 'Mark as read' or 'Mark as junk' etc.
You may want to show the mailbox list (if it is hidden). This is in the 'View menu > Show Mailbox list'. It should make it easier to move the messages around.
The shift key is the one that lets you select a range, just select the starting message, then hold shift & select the end message.
I think it is harder to explain in words, so try it out you'll get to grips with it.
Good luck.

Lync 2013 - Issue with Snooper and Centralized Logging files

I ran the AlwaysOn trace on 3 pools last night till this morning. When I run the search script and include the specific time I want I get a different time in the trace. For example....I want to see the traces from 3-3:30AM. This is what
I ran :
Search-CsClsLogging -Pools "X","Y","Z" -StartTime "12/27/2013 03:00:00 AM" -EndTime "12/27/2013 03:30:00 AM" -OutputFilePath \\file01\LyncShare\Traces\lync_trace122713.txt
When I open snooper the timestamp on the trace is from 8-8:30AM. I checked all the servers in the 3 pools and there are .hdr and .cache files from yesterday to this morning as seen here:
The timestamps on the servers are correct.
Not sure what the issue is. Suggestions? Thanks.

Hi,
The issue may cause by the influence of the cache before.
Please try to run the cmdlet: Sync-CsClsLogging and then run the search cmdlet again to test the issue. The cmdlet
Sync-CsClsLogging will flush the cache used by searching before. Flushing the cache helps to ensure that there is a clean log and trace file capture buffer at the CLSController for the next search operation.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Issues with POWL action buttons and row selection after Support Packs

We recently applied ECC 603 Support Stack 16 to our environment and are having problems with some SAP standard POWL lists (example is KYKOP-OPS-MM-PO-W: Purchase Orders for Goods Receipt). In fact all of the POWL lists that we are using are behaving the same way. There are 2 changes that have happened after moving to this stack.
1. In order to select a row in the list, we now have to press ctrl + click, previously, just clicking the the row would select it and fire the OnLeadSelection
2. All of the Action Buttons in the POWL lists are disabled.
I have debugged the Feeder Class /KYK/CL_MM_FEEDER_PO and see in th GetActions method and see that the ls_actions-enabled is getting set to true, but for some reason the buttons are disabled when the list is rendered.
I've checked a side-effects report from OSS and have come up empty handed. Has anyone else run into this?
Eric

I have found an OSS note that addresses this problem. This problem will effect anyone who is using ALV for ABAP WebDynpro after applying BASIS Support Pack 20 for 7.0. The OSS note is 1363334. Question Answered.

Issue with Corrective Action Deletion Log

Similar Messages

Maybe you are looking for