Issue with Cost Settlement through CJ88

Dear All,
I have maintained "Total Values check" in budget profile under time frame and "overall check" under availability control.
When i am creating service orders then availability control is working properly. But when i am trying to do settlement using cj88 then system is not allowing me to do settlement. It is giving message that budget is exceeded.Even though i have sufficient budget.
Can someone tell me why Availability control is behaving differently?How can i settle costs?I need to settle costs of the project against asset account and all WBS costs should get settled against parent WBS. I had maintained settlement rule for the same.
Regards,
Kamal

Gentlemen,
The solution is temporary as activating/de-activating availability control each time is not viable at the time of settlement run....check the following;
1. If the settlement cost element is a secondary cost element and flasgged as 21 (Internal Settlement).
2. Check the accounting documents after the settlement transaction is posted and look for the sender & reciever cost element.
3. Else request you to kindly explain your chart of account structure only to find out if the settlement reciever cost element is part of COGS (Cost of Goods Sold) cost element group.
4. If the date of creating service entry sheet is beyond the fiscal year as you have suggested that you have activiated both the indicators (Overall & Annual Values) i.e. if date of creation of service order and date of confirmation of service entry sheet.
Hope this is useful
Regards
Kaashif M

Similar Messages

Issue with Cost center in PO and Work Order

Dear Expert,
I am facing an issue with respect to cost center in Purchase Order and Work Order. The PO is made against a work order. There are two cost center associated with the work order. One is updated under u201CAdditional datau201D field and other is at u201Clocationu201D . So the cost center in PO should essentially be the same one mentioned under u2018locationu2019 field of work order. So the issue here is that while creating PO, the cost center is picked from the u201Cadditional datau201D field of work order not from u2018locationu2019 field of WO.
Is there any exit available that needs to be implemented for overriding the cost center in PO or any other way of solving this problem?
Thanks in advance.
Thanks
Deba

Hi,
I guess that there is already some user exit or enhancement in place, since this doesn't sound like standard SAP (picking the cost data from additional data, or even having it there).
Mario

Issue with filtering KPIs through perspectives in a Tabular model

I am having issues with trying to filter KPIs through a perspective. In my fact table, I have three KPIs created out of SumOf measures. There are three different user groups, and one user group wants a KPI specifically for their area, so it should
not show up on the other perspectives.
I remove the SumOf column from the list of fields under the Perspectives menu (there is not an option for a KPI...just Sum of [Column Name]). When I select that perspective through my model view, it does not show the KPI under my fact table, which
is what I would expect.
When I try to analyze in Excel, or deploy to the server and connect to that perspective through a pivot table, at times all KPIs will show up (with my Sum of ... column removed) and other times, zero KPIs appear. When I connect to the default perspective,
however, everything appears.
Has anyone ran into this issue before? I have tried a process recalc on my cube through SSDB (I'm not sure if I did it right) and I tried a recalc through the Process menu to no avail. Any help will be greatly appreciated because I am stumped
at the moment.

I've had problems with KPIs in perspectives (i.e. not showing up in the correct perspective). Unfortunately, I have not been able to find a resolution. At the time I experienced the issue, I tried googling and looking at the forums, but didn't
come up with anything.

Issues with AUTO cycling through ....

I'm trying to do this:
Any help with one or the other is very much appriciated !!!
1) When the Timer is finish auto cycling through the tabs (1 to 16) of the ViewStack, and switching over to tab (1) to STOP, I would like to address a function to do something ???
The question is now how to write the code to ID that the Timer has come to a STOP on tab (1), and how can I incoperate this into the existing (onTimerOne) function.
2) The second item I'm after is that if I'm amnualy select any tab (1 to 16) to address also a function to do something ???
3) The third item I'm after is to automaticly zero (0) the ViewStack to tab number (1) if I click a Btn.
<mx:Script>
<![CDATA[
    import flash.events.TimerEvent;
    import flash.utils.Timer;
    private var timerOne:Timer;
    private function initOne():void {
        timerOne = new Timer(5000, myViewStack.numChildren);
        timerOne.addEventListener(TimerEvent.TIMER, onTimerOne);
    private function onTimerOne(evt:TimerEvent):void {
        if(myViewStack.selectedIndex == myViewStack.numChildren-1) {
        myViewStack.selectedIndex = 0;
        return;
        myViewStack.selectedIndex++;
    private function autoOne():void {
        if (!timerOne.running) {
        timerOne.start();
    private function manualOne():void {
        if (timerOne.running) {
        timerOne.stop();
]]>
</mx:Script>
4) Well, the fourth item I'm trying to work out is as I'm reading my data from an Xml file to have a TextArea which shows the different countries from the Xml file for each ViewStack tab while auto cycling through these tabs (1 to 16).
The diffuculty here is that I use this Xml with a specific urlID="1" to urlId="16" as part shown below.
<urlsOceania>
    <urlOceania urlID="1"/>
    <searchCountry>American Samoa</searchCountry>
    <etc></etc>
</urlsOceania>
I'm reading all the other items this way:
source="{urlsOceania.urlOceania.(@urID==1).etc}"
Thanks in advance aktell2007

Thanks for the confirmation. 7 miles away is most likely using the same VZW tower but it does confirm the problem is not in your current location for us.
You can look up local tower locations from many public websites such as the following:
www.antennasearch.com
www.cellreception.com
http://www.evdoinfo.com/content/view/2990/63/
The signal of -65 shows you have strong reception but it doesnt show the entire picture. Your tower could be overloaded or unauthenticating you. There are lots of little issues that exist outside of the raw signal strength between the towers and the connecting devices that we users have no control over. As you may guess only a tower tech has access to identify and correct these things.
Based on the picture of the back of the MBR1515/Netgear N300 router from Netgear I would assume that only a normal sized SIM card will fit. I would not assume a micro SIM card will fit. Since I do not have access to either of the VZW or non-VZW 4G LTE router I cannot confirm if it will work or not. You might have to give Netgear a call and ask. Based on what I can see from the User Guides of both devices the SIMs used for each should be compatible with eachother.
If you decide to purchase the non vzw version please post back your findings for us.

Goods Issue with cost

Hello
I am trying to make a goods issue to adjust the inventory, but i want to make it with the real cost of the product.
I have just made a formated search to get the cost of the product, the problem is that if i select the last purchase price list, i update this price with the cost, and i dont want to update the last purchase price.
If i choose another list, for example price list 01, this list doesnt get update with the cost?
Thanks
Jacobo

Hi,
The price list in goods issue document is defaulted the 'last purchase
price', and you could manually change it by select from the drop down
list before you add the document.And you could also manually change the info price column.
However the price list and price in the document is only informative. From the testing we could see that the item's cost will always be
used to calculate released stockvalue and create journal postings.
The item cost and last purchase price will not be affected by adding the
goods issue document.
Best Regards
Helen Sun

Issue with passing parameters through Java-JSP in a report with cross tab

Can anyone tell me, if there's a bug in Java SDK in passing the parameters to a report (rpt file) that has a cross tab in it ?
I hava report that works perfectly fine
   with ODBC through IDE and also through browser (JSP page)
(ii)    with JDBC in CR 2011 IDE
the rpt file has a cross tab and accpts two parameters.
When I run the JDBC report through JSP the parameters are never considered. The same report works fine when I remove the cross tab and make it a simple report.
I have posted this to CR SDK forum and have not received any reply. This have become a blocker and because of this our delivery has been postponed. We are left with two choices,
   Re-Write the rpt files not to have cross-tabs - This would take significant effort
OR
(ii) Abandon the crystal solution and try out any other java based solutions available.
I have given the code here in this forum posting..
CR 2011 - JDBC Report Issue in passing parameters
TIA
DRG
TIA
DRG

Mr.James,
Thank you for the reply.
As I stated earlier, we have been using the latest service pack (12) when I generated the log file that is uploaded earlier.
To confirm this further, I downloaded the complete eclipse bundle from sdn site and reran the rpt files. No change in the behaviour and the bug is reproducible.
You are right about the parameters, we are using {?@Direction} is: n(1.0)
{?@BDate} is: dt(d(1973-01-01),t(00:00:00.453000000)) as parameters in JSP and we get 146 records when we directly execute the stored procedure. The date and the direction parameter values stored in design time are different. '1965-01-01' and Direction 1.
When we run the JSP page, The parameter that is passed through the JSP page, is displayed correctly on the right top of the report view. But the data that is displayed in cross tab is not corresponding to the date and direction parameter. It corresponds to 1965-01-01 and direction 1 which are saved at design time.
You can test this by modifying the parameter values in the JSP page that I sent earlier. You will see the displayed data will remain same irrespective of the parameter.
Further to note, Before each trial run, I modify the parameters in JSP page, build them and redeploy so that caching does not affect the end result.
This behaviour, we observe on all the reports that have cross-tabs. These reports work perfectly fine when rendered through ODBC-ActiveX viewer and the bug is observable only when ran through Java runtime library. We get this bug on view, export and print functionalities as well.
Additionally we tested the same in
    With CR version 2008 instead of CR 2011.
(ii)   Different browsers ranging from IE 7 through 9 and FF 7.
The complete environment and various softwares that we used for this testing are,
OS      : XP Latest updates as on Oct 2011.
App Server: GlassFish Version 3 with Java version 1.6 and build 21
Database server ; SQL Server 2005. SP 3 - Dev Ed.
JTds JDBC type 4 driver version - 1.2.5 from source forge.
Eclipse : Helios along with crystal libraries directly downloaded from SDN site.
I am uploading the log file that is generated when rendering the rpt for view in IE 8
Regards
DRG

How can I resolve as possible security issue with unauthorized computers through QuickTime , as a diagnostic and screen shots show evidence of a Mac computer and I don't have one?

II'm trying to resolve an issue that I have with my iPhone 4s through QuickTime. I think it might be an embedded mms that might broadcasts my info as well as allows remote access sometimes. Any answers or similar activity?, I can support with screenshots of public information . This shows in my emIl accounts as well.

Is your phone jailbroken? If it is not, you're probably not seeing what you think you're seeing. If your phone hasn't been jailbroken, it's certainly not being controlled remotely. What do you mean by an "embedded mms"? Are you sharing an Apple ID with anyone? Or could someone have gotten access to your Apple ID information?

Issue with invite accepted through google calendar.

I sent an invite to an event through ical. The recipient accepted through google calendar which in turn sent me an email accepting. However, my original meeting status hasn't changed to reflect that it was accepted. Am I missing something here? How does iCal get updated to know that the recipients have accepted?

UPDATE: My problem was not related to the Sync History, rather the fact the Apple decided to stop supporting Outlook versions older than 2003. I realize that I shouldn't rely on software thats almost 10 years old, but I figured, if it ain't broke, don't fix it. I resolved my calendar sync issues by upgrading to a newer version of Outlook.
Before resorting to this, I successfuly rolled back my iTunes to an earlier version (following directions easily found via Google), but the older version of iTunes didn't recognize my "itunes_library.itl" file - in my iTunes folder. Older versions of this file are archived, so subbing one of those into the main iTunes directory solved that problem, however, I lost about a month of changes to my library. After tooling around with these issues, I finally decided that upgrading Outlook was a simpler solution.
It is curious, however, that iTunes didn't identiy my problem for me, maybe with a messge like "iTunes no longer supports sync for your version of Outlook". It is also curious that my probnlem was only for my calendar: my contacts and notes were still syncing fine both to and from the phone and computer.
Hope this helps others who experienced problems with iTunes and older verisons of Outlook.

Issue with Updating Apps through iTunes

I have been having this issue for sometime now, and through multiple versions of iTunes. Whenever I open up iTunes and see that there are apps that I need up update, i'll click on applications, ill go and click update apps, I'll see the apps that need to be updated and ill click update. I put in my password, but when I do that, I get an error saying:
We could not complete your iTunes store request. There is not enough memory available.
There is an error in the iTunes Store. Please try again later.
Obviously I have enough memory and space on my computer, but not sure if this is an error with the store itself or with my computer some how. I can download new apps with out a problem, purchase anything and download anything through iTunes, even after that error pops up, but I just cant update any apps. I can update them on my phone, and if I sync my phone with iTunes, and then try updating apps that might not be on my phone when I updated them, it will work then. Not sure what would cause this, and its not that big of a deal, just an annoyance and something I find a bit odd.
Thanks for any info and advice.

What part of no wifi did you not understand?
I'm well aware that I can update through the app store, if you had read the original question properly you would see that.

Issue with vlc steaming through dolphin ftp client

I am not sure if i should post this here or in the multimedia section excuse me if i am mistaken. I have been using archlinux in almost 4 weeks with gnome 3. I have installed kde today after removing gnome(pacman -Rscn gnome). I have a small home server running ftp server where i have some media files(.mkv). In gnome i usually used nautilus to access the ftp folder(sftp://servername.dyndns.org/srv/) and run vlc to stream the medias. Tried to do the same with kde dolphin with no luck.
First i was not able to view the folder with dolphin. I researched abd found this thread with a solution:
http://forum.kde.org/viewtopic.php?f=18 … 5&start=15
Now i am able to access the folder, but can't stream any media using vlc.
The following errors are from vlc:
Your input can't be opened:
VLC is unable to open the MRL.
sftp://servername.dyndns.org/srv/filename.mkv
Check the log for details.
Going into tools->messages gives the followings:
main error: open of
sftp://servername.dyndns.org/srv/filename.mkv failed:(null)
I suspect something is wrong the ftp client configuration in dolphin. This bug report also bothers me also :
http://old.nabble.com/-Bug-274170--New% … 05158.html
Other thing is that i am able to open the media files using other media players(dragon player, mplayer), but then the files are automatically downloaded into the local folder /var/tmp/kdecache-username/krun/filename.mkv. The media player then loads the file from there. Its the same if i open a text file in the server, edit it and save it. Its first downloaded to the /var/ folder then asked to upload back to the server when closed.
Its my conclusion that the ftp client in dolphin does not work properly or KDE KIO works different then whatever is used in gnome/nautilus. I hope i have explained the issue as good as possible and would appreciate any help or lead to how to solve this.

Thanks for your reply, after checking some ideas I found that to get the ftp to work I needed to use the internal IP 10.0.0.1 for it rather than the old normal IP like before the firewall(probably a very beginner error sorry for that). And I discovered the exact issue causing clients to not see their characters if not using Hamachi.
Hamachi treats everyone join to the network as though they are local I believe, so when the server send character info via Hamachi it thinks it is sending the info locally and then Hamachi itself sends it out to the extrenal client, while tracing the data I found that the login process sends a 33 byte packet of data to the client via TCP from port 5051 out to the client on a rnadom port usually in the range of 40000-50000 telling the client to send a request to the other process to ask for the character information.
Now for some reason I see when a client logs in through Hamachi that packet is sent correctly to their Hamachi IP and recived fine.(sent from 10.0.0.1:5051 to the Hamachi IP:40k-50k) but when a client tries to log in using a normal IP with Hamachi turned off, the log in process does send the 33 byte packet from 10.0.0.1:5051 to the client WAN IP through the usual port but the client never recieves this packet and as such doesn't not request the character information.
So my guess is something on the 5505 is disallowing the log in process to send the data externally to the clients WAN IP's? Though this is very odd because it does allow the client to actually log in to the account and seems to recieve at least part of that information fine.
If any help that might resolve this for me can be given I would very much appreciate it, this issue is limiting my client base and as such my income and business as a whole. Thank you in advance for any help given.

Issue with sending mail through java stored procedure in Oracle

Hello
I am using Oracle 9i DB. I created a java stored procedure to send mail using the code given below. The java class works fine standalone. When its run from Java, mail is sent as desired. But when the java stored procedure is called from pl/sql "Must issue a STARTTLS command first" error is thrown. Please let me know if am missing something. Tried the same code in 11.2.0.2 DB and got the same error
Error:
javax.mail.MessagingException: 530 5.7.0 Must issue a STARTTLS command first. va6sm31201010igc.6
Code for creating java stored procedure: (T1 is the table created for debugging)
==================================================
create or replace and compile java source named "MailUtil1" AS
import java.util.Enumeration;
import java.util.Properties;
import javax.mail.Message;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeMessage;
public class MailUtil1 {
public static void sendMailwithSTARTTLS(String host, //smtp.projectp.com
String from, //sender mail id
String fromPwd,//sender mail pwd
String port,//587
String to,//recepient email ids
String cc,
String subject,
String messageBody) {
try{
Properties props = System.getProperties();
props.put("mail.smtp.starttls.enable", "True"); // added this line
props.put("mail.smtp.host", host);
props.put("mail.smtp.user", from);
props.put("mail.smtp.password", fromPwd);
props.put("mail.smtp.port", port);
props.put("mail.smtp.auth", "true");
#sql { insert into t1 (c1) values ('1'||:host)};
Session session = Session.getDefaultInstance(props, null);
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
#sql { insert into t1 (c1) values ('2')};
InternetAddress[] toAddress = new InternetAddress[1];
// To get the array of addresses
for( int i=0; i < toAddress.length; i++ ) { // changed from a while loop
toAddress[i] = new InternetAddress(to);
//System.out.println(Message.RecipientType.TO);
for( int i=0; i < toAddress.length; i++) { // changed from a while loop
message.addRecipient(Message.RecipientType.TO, toAddress);
if (cc!=null) {
InternetAddress [] ccAddress = new InternetAddress[1];
for(int j=0;j<ccAddress.length;j++){
ccAddress[j] = new InternetAddress(cc);
for (int j=0;j<ccAddress.length;j++){
message.addRecipient(Message.RecipientType.CC, ccAddress[j]);
message.setSubject(subject);
message.setText(messageBody);
message.saveChanges();
#sql { insert into t1 (c1) values ('3')};
Enumeration en = message.getAllHeaderLines();
String token;
while(en.hasMoreElements()){
token ="E:"+en.nextElement().toString();
#sql { insert into t1 (c1) values (:token)};
token ="ConTyp:"+message.getContentType();
#sql { insert into t1 (c1) values (:token)};
token = "Encod:"+message.getEncoding();
#sql { insert into t1 (c1) values (:token)};
token = "Con:"+message.getContent();
#sql { insert into t1 (c1) values (:token)};
Transport transport = session.getTransport("smtp");
#sql { insert into t1 (c1) values ('3.1')};
transport.connect(host, from, fromPwd);
#sql { insert into t1 (c1) values ('3.2')};
transport.sendMessage(message, message.getAllRecipients());
#sql { insert into t1 (c1) values ('3.3')};
transport.close();
#sql { insert into t1 (c1) values ('4')};
catch(Exception e){
e.printStackTrace();
String ex= e.toString();
try{
#sql { insert into t1 (c1) values (:ex)};
catch(Exception e1)
Edited by: user12050615 on Jan 16, 2012 12:18 AM

Hello,
Thanks for the reply. Actually I have seen that post before creating this thread. I thought that I could make use of java mail to work around this problem. I created a java class that succesfully sends mail to SSL host. I tried to call this java class from pl-sql through java stored procedure. That did not work
So, is this not supported in Oracle ? Please note that I have tested this in both 9i and 11g , in both the versions I got the error. You can refer to the code in the above post.
Thanks
Srikanth
Edited by: user12050615 on Jan 16, 2012 12:17 AM

Issue with Consolidate Action through Batch Process

We find that when "Load" reports an error, "Consolidate" does not fire - only from Batch. When processing manually, Consolidate fires regardless of Load errors.
We are using an Essbase load rule that results in records continuing to be loaded, when there are kickouts. So, the Essbase API is returning an error code to FDM [that's fine].
We want to run a calc script whether or not the load errors.
Again, with a "manual" process - no problem. But Batch stops prior to firing Consolidate.
We checked the Batch flag - we set it to "10" (Consolidate) and even "12" (Check).
Any thoughts?
We are trying to avoid altering the Load Action code to execute the Essbase calc within that code set.
Any inputs regarding this issue would be greatly appreciated.
Thanks

Thanks for responding back. I have seen the link before.
We have HR_PL_ADMINISTRATOR_000 role. The role has P_ASRCONT P_ORGIN and P_PERNR object. Object P_ORGIN needs to be set as
Authorization level            Read
Infotype                           *
Personnel Area                *
Employee Group              *
Employee Subgroup         *
Subtype                           *
Organizational Key            *
in order to show the Hire Process in execute hiring link on the Portal. If we put a restriction on personal area, we do not see the Hire process on the execute hiring on the portal.
Kindly advice.
Thanks,
Gowri

Issue with running pages through jDev, wls starts but no target url is provided.

Hi all,
I recently downloaded an older version of jDev for a new assignment - Studio Edition Version 11.1.1.6.0 - Build JDEVADF_11.1.1.6.0CLOUD_GENERIC_121118.1600.6229.
I created a basic wls domain and I've tried running simple jspx pages, at which point a weblogic appears to have started without issue. However, my page never runs and no target domain is provided. Below is how my log appears and it just seems to hang. I'm my experience a window always popped up in my default browser with the domain and it is also shown in the log. Going to my expected default domain (http://127.0.0.1:7101/Home.jspx for example) results in a 404. I sure its something stupid, but I'm not sure how to address this issue. Any advice would be appreciated.
*** Using port 7101 ***
<Jul 7, 2013 5:01:48 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jul 7, 2013 5:01:52 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 7, 2013 5:01:52 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\dslack\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\dslack\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00017. Log messages will continue to be logged in C:\Users\dslack\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jul 7, 2013 5:02:19 PM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Regards - Dylan

Hi dslack,
Please delete the default domain from the following path. Close Jdev before deleting and restart , it will create a new domain.
C:\Users\dslack\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain
Thanks
Sandeep

Issue with finder screen sharing.

My iOS development partner and I are currently having issues with screen sharing through the finder. Prior to installing OSX Mavericks there was no issue with adding each other as users to each others computer, but after the install is when the problem started happening. At the root level there are multiple users on each other's computers with our corresponding names but they don't appear in Users and Groups. So, having phantom users on each other's computers, we took them into the Genius Bar at our local apple store. They tried a few different methods, none of which worked, and had us reinstall the operating system and now we're back at square one having to resort to using the "permission" screen share as opposed to just being able to screen share directly though user accounts that we previously set in system preferences. I used the following console command, but it doesn't show the same accounts in the Users and Groups under System Preferences.: (dscl . list /Users | grep -v "^_") Any help or insight would be greatly appreciated.
Currently running Software OS X 10.9.1 (13B42) on both machines.

Found an answer at the following link.
https://discussions.apple.com/thread/5677786?start=0&tstart=0
Message was edited by: Shadowchief

Firefox Web Browser connectivity and email issues with Comcast connection

I have been having an issue with Firefox conecting through Comcast both to xfinity home and especially to email for the past 2 to 3 months. I finally solved the problem. Comcast requires no proxy setting. To solve the problem go to Firefox Tools, click on Options, click on the tab Advanced. Click on Settings, the check the box for "No proxy". Click Ok. And that did it! Am I glad. Reading email was getting very tedious with all the waiting.

Graifox wrote:
I have been having an issue with Firefox conecting through Comcast both to xfinity home and especially to email for the past 2 to 3 months. I finally solved the problem. Comcast requires no proxy setting. To solve the problem go to Firefox Tools, click on Options, click on the tab Advanced. Click on Settings, the check the box for "No proxy". Click Ok. And that did it! Am I glad. Reading email was getting very tedious with all the waiting.
I'm glad you got it worked out and are now able to enjoy the email reading experience more. Great problem solving!

Issue with Cost Settlement through CJ88

Similar Messages

Maybe you are looking for