Issue with Data Extraction for Master data

Hi All,
I have requriment to enhance standard Datasource(0VENDOR_ATTR) to populate certain fields from table LFBK.
I have enhanced the datasource and the i am able to pull the data in ECC via RSA3.
After that i have replicated the Datasource in BI and have activated the Datasource and the enhanced fields are available in BI datasources and have created the transformation between Datasource and 0VENDOR.
when i run the infopackage, the new enhanced fields are not getting populated. I really wonder how the data is not coming to BI, when its is getting populated in RSA3 in ECC.
Request to give your solution to solve this issue.
Regards,
Gowrisankar

Hello Gowrisankar N K ,
After making changes to your 0VENDOR_ATTR DS, make sure that you had replicate DS at BI side.
if not then please first Replicate the DS & check the newly enhanced field is available in PSA.
Regards,
Divyesh Khambhati

Similar Messages

Issue with Data Provider name in variable screen for BEx Analyzer

Hello all,
We got an issue with Data Provider name in Variable screen in BEx Analayzer.
We want to change the DataProvider name there to Description of the report instead of its Technical name.
Any inputs are appreciated.
Thanks
Kumar

You have to create a workbook to do this.
Refresh your query/report. In Bex analyser, there is one toolbar named BEx design toolbox, If you are not able to see it in analyser, right click on the toolbar space of BEx analyser and click on BEx design toolbox. Here, goto to design mode, by clicking on a sysbol like 'A'. after that place the curser where you want to see the Query description. and click on insert text (T) in BEx toolbox. click on it and check "Query description" in constant tab. in the general tab you need to assign a dataprovider, for that assign your query name in workbook settings (in Bex design toolbox). also check the "display caption" in general tab.
Pravender

Issue with Date Format

Hi All,
I m facing an issue with Date format in the prompt. I have used date presentation variables in my column formula as shown below:
FILTER("SKU Order Details"."Fulfilled Quantity" USING Time."Calendar Date" <= DATE '@{todate}{2900-01-01}')
The report returns data when I don't select any date range for start & end date prompts on the page. But when I select the start & end date values in the prompt, I m getting the following error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 10/22/2009 12:00:00 AM from 10/22/2009 12:00:00 AM does not match the specified format. (HY000)
I included the following formulas for start & end date prompts:
Start Date prompt: case when 1=2 then License."Ips Creation Date" else cast ('1.1.1900' as date) end
End Date prompt: case when 1=2 then License."Ips Creation Date" else cast ('1.1.2900' as date) end
Can you please help me resolve the issue.
Thanks,
Kartik

Hi Nico,
I tried putting the format that you mentioned, I m getting an error message.
My prompts have the following formula :
Start: case when 1=2 then License."Creation Date" else cast('1.1.1900' as DATE) end
End: case when 1=2 then Time."Calendar Date" else cast('1.1.2900' as DATE) end
My column formula has the following syntax:
FILTER("SKU Order Details"."Fulfilled Quantity" USING Time."Calendar Date" between DATE '@{start}{1900-01-01}' AND DATE '@{end}{2999-01-01}')
Error Message:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 11/17/2009 from 11/17/2009 does not match the specified format. (HY000)
Can you please let me know if something needs to be changed.
Thanks,
Kartik

Issue with data dictionary -Table maintanance generator

Hi all,
I have an issue with Data dictionary, table maintenance generator. I have entered some records in a custom table (ZBCSECROLETOGRP) and changed the delivery class from C to A. When I create the table maintainance generator, I am encountered with the following errors:
1)Field ZBCSECROLETOGRP-PORTALGROUP shortened (new visible length: 000032)
2)0012 could not be generated
3)In TCTRL_ZBCSECROLETOGRP field LENGTH has the invalid value 01
My main motto is to create the table maintainace generator and transport to the furthur systems .
Please help.
ThnX in advance,
Vishal..

HI,
Regenerate the table maintenance by selecting the checkbox of "Modified field structure" => new entry & then save.
Also ensure that the new changes are not affecting old data bcz of data type changes. If that is the case, then delete the old records, regenerate table maint. & re-enter those records which you had deleted.
Thanks,
Best regards,
Prashant

I have an issue with disappearing option for 1920x1080 in Preferences / Displays.

Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080. This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
I have tried:
Power down Monitor & restart
Shutdown & restart
Shutdown & restart in Safe Boot Mode (options same in Prefs)
Power down Monitor & restart in Safe Boot Mode
Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
Udated Pram
I am now at a loss, I guess I could try a recovery, and download/install Mavericks again, but do not wish to do this if I can help it.
I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
Anyone out there have any ideas, please.

Back up all data. Quit System Preferences if it's running.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Preferences/ByHost
In the Finder, select
Go ▹ Go to Folder...
from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
Test.

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

http://support.apple.com/kb/TS3694#error-1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Issue with Date Format for Presentation Variables

Hi,
I am using dashboard prompts to capture begin date and end date in presentation variables. The dates selected from calendar are in the format mm/dd/yyyy.
In Asnwers I need to get a count of days between begin and end dates. I am using the column formula as shown:
TIMESTAMPDIFF(SQL_TSI_DAY, DATE '@{pBeginDate}', DATE '@{pEndDate}')
When ever I run the report from dashboard I get the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46046] Datetime value 1/1/2005 does not match the specified format. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Transaction Dates"."Transaction Date", TIMESTAMPDIFF(SQL_TSI_DAY, DATE ''1/1/2005'', DATE ''1/2/2006'' FROM "Dates"')}
SQL Issued: SELECT "Transaction Dates"."Transaction Date", TIMESTAMPDIFF(SQL_TSI_DAY, DATE '1/1/2005', DATE '1/2/2006') FROM "Dates"
Can anyone help me to reolve this date format issue?
Thanks,
Aravind

Hi,
see this below links
Issues with Prompts calender date
Regards
Naresh

Issues with data usage Samsung S5

Over the past few months I have been paying outrageous bills due to one of my lines eating all my data when there is no one even touching the phone. I have 3 phones and a tablet on my plan and I am paying 288.00 a month and last month they charged me 15.00 for overage usages because it went over on the last day of the billing cycle. Once again that one line ate up all the data even though it's connected to our wifi or just sitting dormant. I am getting sick of paying these outrageous prices and am about to go somewhere else. I was tricked into the 10.00 a month tablet fee when I signed two phones up under the verizon edge plan. the sales clerk did not tell me I could not cancel the 10.00 a month fee because it would be under a year contract nor did I sign anything saying that, but when I went back in to change the 3rd line over to the Edge plan they told me it would be a $300 or so disconnect charge. So of course I am still paying 10.00 a month for no reason because I have wifi in my home and I only use the tablet in my home. so i need help with trying to figure out the data issues with just one of my lines. I do not have bluetooth on or location. I have went to the play store and uninstalled everything I could. I constantly close out of my applications and clear history etc.,,

So you thought they would just give you a free tablet at $10 a month and it didn't need to be in a contract like phones? I took the free tablet too but common sense told me it was locked into a contract, I didn't even ask as I just knew that would be the case but I didn't care. Mary

Issue with Date showing Null in interactive report

I created an interactive report for a customer and was confused to see blanks or more specifically dashes where there should be dates in one of the fields. I knew this field should have data so I did some testing and this is what I have found:
The sql I am running is:
select
assigned_to_company,
last_resolved_date,
incident_id
from
rhpd0009_im_adherence_rpt2_vw
When I run the command in SQL workshop I get the following results with data in the last_resolved_date field:
[http://i83.photobucket.com/albums/j299/yogibayer/apexdateissuesqlcommand.jpg]
I copied and pasted the SQL from SQL workshop and created a new interactive report and got the following results with no last_resolved_dates showing up:
[http://i83.photobucket.com/albums/j299/yogibayer/apexdateissueinteractivereport.jpg]
For some reason the order is different, but the first one INC1117629 shows up in both of them and has a last_resolved_date in SQL workshop, but not in the interactive report. Any help would be appreciated.
Thank You
Scott

Varad,
It seems to be related to the function we use to convert Remedy dates to Viewable dates. Remedy dates are stored as an integer that represents the absolute number of seconds from Jan 1, 1970 at 12:00 AM. We use a function that converts this number into a human readable date. I have tried encapsulating the result of the function in a TO_DATE and a TO_CHAR with the same results as before. There is something about the resulting data from the date convert function that Apex doesn't like. It would be interesting to isolate what exactly the issue is, but right now I'm just trying to find a work around.
Thank You
SCott

Issue with Date format - ABAP to XML

Dear Users,
We are currently facing an issue with the date formats in XML.
We have a system (.Net), which has a webservice that we are calling for information from SAP. We created a Proxy class in SAP from the WSDL file and have attempted to use the method that gets us required information based on the Timestamp passed from SAP. However, the timestamp that the INPUT structure uses has a data element XSDDATETIME_Z.
All we can send from SAP is a simple TIMESTAMP, but the .Net system doesn't accept it since it wants the timestamp in XML format i.e. <dd-mm-yyyy>T<hh:mm:ss>Z. SAP documentation says that the field should automatically do conversion from ABAP to XML format, but that doesn't happen. We don't want to build a string from Timestamp in the XML format and send it out since we might surely miss out on the different cases involved.
Can anyone please suggest a way for us to send the date out in the required XML format?
Many thanks!

Hi Vijay,
Look at the below sample code and it works fine, i guess there is something wrong in your code or conversion, post the actual code if you are still not able figure it out with the below example.
DATA: l_xml_string TYPE string,
      l_dat_time TYPE xsddatetime_z.
CALL FUNCTION 'CACS_DATE_GET_TIMESTAMP'
EXPORTING
   I_DATE                         = sy-datum
   I_TIME                         = sy-uzeit
IMPORTING
   E_TIMESTAMP                    = l_dat_time
EXCEPTIONS
   DATE_NOT_FILLED_BUT_TIME       = 1
   DATE_HAS_NO_VALID_FORMAT       = 2
   OTHERS                         = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL TRANSFORMATION id
SOURCE root = l_dat_time
RESULT XML l_xml_string.
IF sy-subrc EQ 0.
write: l_xml_string.
ENDIF.
Regards,
Chen

Issue with Data Load to InfoCube with Nav Attrivutes Turned on in it

Hi,
I am having a issue with loading data to a InfoCube. When i turn
on the navgational attributes in the cube the data load is failing
and it just says "PROCESSED WITH ERRORS". when i turn them off
the data load is going fine. I have done a RSRV test both on
the infoobject as well as the cube and it shows no errors. What
could be the issue and how do I solve it.
Thanks
Rashmi.

Hi,
To activate a navigation attribute in the cube the data need not be dropped from the cube.
You can always activate the navigation attribute in the cube with data in the cube.
I think you have tried to activate it in the master data as well and then in the cube or something like that??
follow the correct the procedure and try again.
Thanks
Ajeet

Performance issues with data warehouse loads

We have performance issues with our data warehouse load ETL process. I have run
analyze and dbms_stats and checked database environment. What other things can I do to optimize performance? I cannot use statspack since we are running Oracle 8i. Thanks
Scott

Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim

Issue with Data type 'Date' in Hyperion Planning V11.1.2.2

Hi,
I have created members with data type date. However when I save the date, it either disappears or comes up with a random date? Has any one come across this kind of problem before?
If so can you share the fix.
Thanks in advance for your help.
Cheers,
XXX

Hi
This problem is linked to you not having a consistent setting for your date input type.
So, go to application administration and set the date format to MM/DD/YYYY in application settings and display options, under current application defaults. Then after you have done this as a user go to User Preferences and display options and on the date format select the same. Or remove the Automatically detect.
I have seen this behaviour if you have Automatically Detect on the user preferences
Thanks
Anthony

Issue with Date and Time Picker on Windows 8.1 and Office 2013

We are having a issue with the Developer tool in Excel called the Date and Time Picker which puts a calendar field into the spreadsheet where you can select a date from the calendar popup
If we change this date field and then save and close and reopen it reverts back to the previous date before the change was made
If we do the same process on a Windows 7 machine with Office 2013 it saves the changes we made to the Date and Time picker field

Hi jdono2,
I'm using Windows 8 and Office 2013,and I can't reproduce this issue.
Please make sure you have already upgraded to the latest version of excel, try to reregister the MSCOMCT2.OCX.
Also you can try to use another date picker add-in to test this issue.
http://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar?forum=exceldev
Wind Zhang
TechNet Community Support

Issue with Data Load Table

Hi All,
       i am facing issue with apex 4.2.4 ,using the Data Load Table concept's and in this look up used the
      Where Clause option ,it seems to be not working this where clause ,Please help me on this

hi all,
    it looks this where clause not filter with 'N' data ,Please help me ,how to solve this or help me on this

Issue with Data Extraction for Master data

Similar Messages

Maybe you are looking for