Issue with Datagaurd Broker..

hi friends..
I m using datagaurd from several moths now..Primary and physical standby are working fine..
Primary databasee--->sid=primary and Physical Standby database-->sid-standby.
My OS version is windows 2003 sever and Oracle version is 11gR1
NOw i m planning to use dgmgrl..
so the steps that i performed was..
1) Make sure Data guard is configured and both the Primary and Physical Standby database in place and redo transport and redo apply have already been configured and that both the Primary and Standby database are in sync.
2)Make sure both the databases should b up with SPFILE only..
ALTER SYSTEM SET DG_BROKER_START=TRUE SCOPE=BOTH; on both databases
Now after setting oracle_sid =primary
DGMGRL>
create configuration 'sai'
as primary database is 'primary'
connect identifier is 'primary';Error-ora-16625..cannot reach the database ...
Note:- the archive logs r transfereed to standby by properly so..transoporation and apply is perfectly fine..but only dgmgrl is not wokring..
my listener file on both database (sid=primary and sid-standby..on both severs)..
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = primary_dgmgrl)
(ORACLE_HOME = C:\app\Administrator\product\11.1.0\db_1)
(SID_NAME = primary)
Let me know if u have any idea or if u need any info...
Thnks guys..

Guys..any idea about my query..Kindly help..

Similar Messages

Issue with Dataguard Broker

DB Version -Oracle Database 11g Enterprise Edition Release 11.2.0.2.0
DGMGRL> show configuration;
Configuration - testDG
Protection Mode: MaxPerformance
Databases:
orcl - Primary database
standby1 - Physical standby database
Error: ORA-16664: unable to receive the result from a database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
I completed all basic checks i.e 1) Listerner on both standby and physical db's contains entry for DGMGRL 2) tnsping is working fine from both primary and physical dB’s, 3) I disabled configuration, removed the old broker configuration files and rebuild it, still the issue is not resolved4) All other issues like log shipping and sync is perfect in the configuration
Any help here will be highly appreciated !!
Thanks in advance .
Edited by: 918868 on Apr 10, 2013 10:40 AM

I did this testing before,see the below output :-
[oracle@primary ~]$ sqlplus sys/oracle@standby1 as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Thu Apr 11 08:07:06 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
I checked lot of other things, dgbroker log shows the below lines :-
2013-04-11 08:09:03.793 00000000 1207911714 for opcode = HEALTH_CHECK, phase = BEGIN, req_id = 1.1.1207911714
2013-04-11 08:09:48.669 00001000 1207911715 DMON: Entered rfm_get_chief_lock() for MON_VERIFY, reason 0
2013-04-11 08:09:48.670 00001000 1207911715 DMON: start task execution: client healthcheck
2013-04-11 08:09:48.670 INSV: Received message for inter-instance publication
2013-04-11 08:09:48.670 req ID 1.1.1207911715, opcode MON_VERIFY, phase BEGIN, flags 5
2013-04-11 08:09:48.888 INSV: Reply received for message with
2013-04-11 08:09:48.889 req ID 1.1.1207911715, opcode MON_VERIFY, phase BEGIN
2013-04-11 08:10:04.044 NSV1: Site standby1 returned ORA-16664.
2013-04-11 08:10:04.045 00000000 1207911715 DMON: Database standby1 returned ORA-16664
2013-04-11 08:10:04.045 00000000 1207911715 for opcode = MON_VERIFY, phase = BEGIN, req_id = 1.1.1207911715
2013-04-11 08:10:04.045 00000000 1207911715 DMON: Entered rfm_release_chief_lock() for MON_VERIFY
Any other further troubleshooting tips will be great.
Thanks in advance.

Problem with versioning on iPod, backwards compatibility issue with iTunes

i apologize in advance because i'm sure this has been asked time and time again, but i did attempt several searches.
the search function is very muddled and does not narrow down the results very well at all
here's the situation.
from all accounts i've heard lots of people having issues with version 7 of iTunes.
i'm a simple kinda guy who definitely believes in the age old phrase "if it ain't broke, don't fix it."
so i've stuck with v6.
i recently got a new laptop along with my PC. so i downloaded and installed the latest iTunes without thinking twice.
i had completely forgotten about my concerns from hear say about v7 issues.
i plugged in my iPod and it proceeded to completely erase all of the media on it and then load all media that was on my laptop in place of it.
"well that's a cool new feature", i thought.
after my initial frustration wore off, i immediately uninstalled v7, deleted the .itl file and installed v6.
everything was all fine and dandy. v6 works perfectly on the laptop with no hangups.
here comes the issue...
i plug in my iPod to begin rebuilding my media onto it after the completely unauthorized deletion, creditted to iTunes v7.
as it autoplays and iTunes v6 opens i'm prompted with this error:
"The iPod [my ipod] cannot be used because it requires iTunes version 7.0 or later.
Go to www.itunes.com to download the latest version of iTunes."
i've attempted everything i can think of to completely erase my iPod of any "versioning".
- i reset it using the "select/menu" button method
- i reformatted it through XP disk manager
- i reformatted it through context menu in my computer explorer window
- i completely just deleted the "iPod control" directory in the iPod explorer window when clicking through the my computer directory
i'm at a loss.
i cannot figure out a way to get my iPod to function with iTunes v6.
and again, i'm really hoping to avoid going to v7.
iPod information:
2nd generation iPod nano 4GB
thank you in advance for any and all information/advice

I am guessing that you used your iPod enough with iTunes v. 7.x to update the firmware to the latest version. That being the case, reformatting your iPod won't "undo" the firmware update, so your only choice now is to update your iTunes software to v. 7.x.
FWIW, iTunes 7 is a vast improvement over previous versions of iTunes. I use it on both Windows and OS X, and without bugs in both environments.

Apple has Major Issue with Podcast Updating

I have been getting reports from a large number of the folks we represent at RawVoice indicating they are having the same issue with the podcast listings updating in iTunes.
We are going to poll our 6000 podcasters and have them start watching this more closely. Everything has been working perfectly for such a long time most of us never check iTunes anymore.
It could be some update that iTunes is doing but it is negatively effecting many podcasters because the listeners do not know enough to hit Refresh on the subscription listing.
I know my download numbers are way down over the past week because it looks like I have not updated my show. Please check your podcast listings. If you see that they are not updating within a couple of hours of posting start submitting trouble tickets.
Something is broke and I don't think Apple is aware of it. I am getting standard boiler plate responses back from tech support. But if they have enough submissions then they will know something is jacked up.
Here is the info to submit a ticket, you will have to be persistent or you will not get a response.
http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'.

try taking down the power to the ATV since the last update. Then power back on.

Wine taking hell lot of time to do anyting and issue with amibroker

I installed wine and winetools. Initially, there were some problems with openGl, etc., which resolved after I enabled "glx" and "dri" in xorg.conf. Now, wine was supposed to work but it did not, it seemed to hang. Then i came across this http://bbs.archlinux.org/viewtopic.php?id=24345
This suggested me to wait and i did the same. After half an hour winecfg finally started. Then I ran "wine some-set-up-file.exe" and it too 10 minutes to see the installer. I installed a program called amibroker and on starting the program (it too 5 minutes to start), there was an issue with MFC42.dll which I downloaded and saved in ~/.wine/drive_c/windows/system32.
Then on starting the program again, i got this error:
[shantanu@bluehead ~]$ wine ~/.wine/drive_c/Program\ Files/AmiBroker/Broker.exe
Warning: could not find DOS drive for current working directory '/home/shantanu', starting in the Windows directory.
wine: Call from 0x6782aa18 to unimplemented function MFC42.DLL.6571, aborting
wine: Unimplemented function MFC42.DLL.6571 called at address 0x6782aa18 (thread 0009), starting debugger...
Unhandled exception: unimplemented function MFC42.DLL.6571 called in 32-bit code (0x7efa2f58).
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b
EIP:7efa2f58 ESP:0033fc98 EBP:0033fcfc EFLAGS:00200206( - 00 - -IP1)
EAX:000019ab EBX:7efe46cc ECX:00000000 EDX:678a0660
ESI:0033fca4 EDI:6789e0d0
Stack dump:
0x0033fc98: 7efe46cc 0033fcbc 7efa408b 80000100
0x0033fca8: 00000001 00000000 6782aa18 00000002
0x0033fcb8: 67882b68 000019ab 0033fce0 6781adfd
0x0033fcc8: 678a0660 00000000 0000003d 00000020
0x0033fcd8: 0000005a 00000000 00000078 6781afe5
0x0033fce8: 00000000 00000000 00000000 7ecd459c
Backtrace:
=>1 0x7efa2f58 stub_entry_point+0x58() in ntdll (0x0033fcfc)
2 0x6782aa18 in amixtp (+0x2aa18) (0x0033fd4c)
3 0x6786614e in amixtp (+0x6614e) (0x0033fd78)
4 0x7efa1fc5 call_dll_entry_point+0x15() in ntdll (0x0033fd98)
5 0x7efa3bed MODULE_InitDLL+0x8d() in ntdll (0x0033fe28)
6 0x7efa440d process_attach+0x12d() in ntdll (0x0033fe68)
7 0x7efa4352 process_attach+0x72() in ntdll (0x0033fea8)
8 0x7efa6450 LdrInitializeThunk+0x2d0() in ntdll (0x0033ff08)
9 0x7ee87e65 start_process+0xb5() in kernel32 (0x0033ffe8)
10 0xb7e9f6f7 wine_switch_to_stack+0x17() in libwine.so.1 (0x00000000)
0x7efa2f58 stub_entry_point+0x58 in ntdll: subl $4,%esp
Modules:
Module Address Debug info Name (91 modules)
PE 400000- 545000 Deferred broker
PE 10000000-10006000 Deferred brokey
PE 10100000-10142000 Deferred cooltool
PE 10200000-10236000 Deferred misctool
ELF 41191000-41194000 Deferred libxau.so.6
ELF 41196000-4119b000 Deferred libxdmcp.so.6
ELF 4129f000-412ad000 Deferred libxext.so.6
ELF 412af000-412c7000 Deferred libice.so.6
ELF 41480000-41486000 Deferred libxrandr.so.2
ELF 414d9000-414f8000 Deferred libexpat.so.1
ELF 414fa000-41525000 Deferred libfontconfig.so.1
ELF 41527000-4152f000 Deferred libxrender.so.1
ELF 415b0000-415b5000 Deferred libxfixes.so.3
ELF 415b7000-415ba000 Deferred libxinerama.so.1
ELF 415bc000-415c5000 Deferred libxcursor.so.1
ELF 416da000-416df000 Deferred libxxf86vm.so.1
ELF 416fb000-4175d000 Deferred libgl.so.1
ELF 4175f000-41768000 Deferred libdrm.so.2
ELF 4185b000-4186b000 Deferred libtasn1.so.3
ELF 426f7000-426fb000 Deferred libgpg-error.so.0
ELF 42959000-429ab000 Deferred libgcrypt.so.11
ELF 4585c000-4588b000 Deferred libcups.so.2
PE 5f400000-5f4ed000 Deferred mfc42
PE 67800000-678cd000 Export amixtp
ELF 7bf00000-7bf03000 Deferred <wine-loader>
ELF 7df96000-7dfaa000 Deferred msimg32<elf>
\-PE 7dfa0000-7dfaa000 \ msimg32
ELF 7dfaa000-7dfbf000 Deferred midimap<elf>
\-PE 7dfb0000-7dfbf000 \ midimap
ELF 7dfbf000-7dfe5000 Deferred msacm32<elf>
\-PE 7dfd0000-7dfe5000 \ msacm32
ELF 7dfe5000-7dffd000 Deferred msacm32<elf>
\-PE 7dff0000-7dffd000 \ msacm32
ELF 7dffd000-7e039000 Deferred wineoss<elf>
\-PE 7e000000-7e039000 \ wineoss
ELF 7e039000-7e03f000 Deferred libnss_dns.so.2
ELF 7e03f000-7e055000 Deferred libnsl.so.1
ELF 7e055000-7e083000 Deferred libcrypt.so.1
ELF 7e0f6000-7e163000 Deferred libgnutls.so.13
ELF 7e1c3000-7e1f5000 Deferred uxtheme<elf>
\-PE 7e1d0000-7e1f5000 \ uxtheme
ELF 7e28b000-7e378000 Deferred libx11.so.6
ELF 7e3a3000-7e3ab000 Deferred libsm.so.6
ELF 7e3ab000-7e43a000 Deferred winex11<elf>
\-PE 7e3c0000-7e43a000 \ winex11
ELF 7e494000-7e4a6000 Deferred libz.so.1
ELF 7e4a6000-7e521000 Deferred libfreetype.so.6
ELF 7e521000-7e5af000 Deferred winmm<elf>
\-PE 7e530000-7e5af000 \ winmm
ELF 7e5af000-7e5c3000 Deferred lz32<elf>
\-PE 7e5c0000-7e5c3000 \ lz32
ELF 7e5c3000-7e5dc000 Deferred version<elf>
\-PE 7e5d0000-7e5dc000 \ version
ELF 7e5dc000-7e5ee000 Deferred libresolv.so.2
ELF 7e5ee000-7e60c000 Deferred iphlpapi<elf>
\-PE 7e600000-7e60c000 \ iphlpapi
ELF 7e60c000-7e661000 Deferred rpcrt4<elf>
\-PE 7e620000-7e661000 \ rpcrt4
ELF 7e661000-7e6fd000 Deferred ole32<elf>
\-PE 7e670000-7e6fd000 \ ole32
ELF 7e6fd000-7e796000 Deferred oleaut32<elf>
\-PE 7e710000-7e796000 \ oleaut32
ELF 7e796000-7e7c8000 Deferred winspool<elf>
\-PE 7e7a0000-7e7c8000 \ winspool
ELF 7e7c8000-7e885000 Deferred comctl32<elf>
\-PE 7e7d0000-7e885000 \ comctl32
ELF 7e885000-7e8dd000 Deferred shlwapi<elf>
\-PE 7e890000-7e8dd000 \ shlwapi
ELF 7e8dd000-7e9d7000 Deferred shell32<elf>
\-PE 7e8f0000-7e9d7000 \ shell32
ELF 7e9d7000-7ea77000 Deferred comdlg32<elf>
\-PE 7e9e0000-7ea77000 \ comdlg32
ELF 7ea77000-7ebb1000 Deferred user32<elf>
\-PE 7ea90000-7ebb1000 \ user32
ELF 7ebb1000-7ebf7000 Deferred advapi32<elf>
\-PE 7ebc0000-7ebf7000 \ advapi32
ELF 7ebf7000-7ec8c000 Deferred gdi32<elf>
\-PE 7ec10000-7ec8c000 \ gdi32
ELF 7ec8c000-7ecf0000 Deferred msvcrt<elf>
\-PE 7eca0000-7ecf0000 \ msvcrt
ELF 7ee18000-7ef3b000 Export kernel32<elf>
\-PE 7ee30000-7ef3b000 \ kernel32
ELF 7ef3b000-7ef45000 Deferred libnss_files.so.2
ELF 7ef45000-7ef6a000 Deferred libm.so.6
ELF 7ef6a000-7f000000 Export ntdll<elf>
\-PE 7ef80000-7f000000 \ ntdll
ELF b7d41000-b7d45000 Deferred libdl.so.2
ELF b7d45000-b7e70000 Deferred libc.so.6
ELF b7e70000-b7e87000 Deferred libpthread.so.0
ELF b7e98000-b7fa9000 Export libwine.so.1
ELF b7faa000-b7fc6000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
0000000a
0000000c 0
0000000b 0
00000008 (D) C:\Program Files\AmiBroker\Broker.exe
00000009 0 <==
[shantanu@bluehead ~]$
I have no idea abt this. Any solution guys.
Last edited by ravisghosh (2007-05-27 21:22:23)

Instead of writing the whole path of the exe file wth wine, I went into the Amibroker folder in a console by doing cd and then ran
wine Broker.exe
Then Amibroker worked fine. I dont know why. but its working.
however, it gives this error in console
Warning: could not find DOS drive for current working directory '/home/shantanu', starting in the Windows directory.
err:module:import_dll Library qpdll.dll (which is needed by L"C:\\Program Files\\AmiBroker\\Plugins\\QP2.dll") not found
err:module:import_dll Library FastTrack.dll (which is needed by L"C:\\Program Files\\AmiBroker\\Plugins\\FT.dll") not found
[shantanu@bluehead ~]$
On searching my windows directory, I could not find anything like qpdll.dll or FastTrack.dll. On searching web also, I could not find anything like qpdll.dll, but FastTrack.dll seems to be a malware!!!

Windows 8.1 Data reordering issue with Intel Adaptors

According to Intel, there is a data reordering issue with their adaptors and probably this dumb WIDI software. This is from Intel site. they say some are fixed, "A future Windows 8 fix will address this issue for other Intel wireless adapters." I
have one Nope, still broke. I get drops all the time. Brand new Toshiba laptop I7 16 gigs of ram and a SSD and a 2 gig Vid card. Would be nice to be able to play games but I get dropped all the time. Now would Microsoft quit hiding
about this, and fix the darn thing. Also i'm a system admin for 13 years. I have build over 1000 PCs and servers. I know bad software. Please fix this. PLEASE. Its not going to just go away and its not just Toshiba, I have seen other companies with the
same problem. If there is a Fix PLEASE POST IT. Or even a workaround I have tried everything.
http://www.intel.com/support/wireless/wlan/sb/CS-034535.htm

Hi,
Have your first tried the software fix under this link for your network adapter?
http://www.intel.com/support/wireless/wtech/proset-ws/sb/CS-034041.htm
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
Also, you can try to check if there is any driver update under Device manager from manufacture's website.
Kate Li
TechNet Community Support
Yep didn't work. Still get drops all the time, had to run a Cat 5E cable to my laptop from my modem, because I have Atheros Gigabyte Lan adaptor. Works Great. The Wireless still drops all the time. Has Microsoft let out the patch to fix this or is it coming in
April in the 8.1 patch that's coming. Funny thing is all for Widi, I don't even use widi, I got the software to do that from Samsung works better on my TV. Intel and Microsoft need to get this fixed. because their driving off gamers and that's the
people that make sure they buy Microsoft so they can play games. With the wireless link dead and a great laptop worthless what's the point. Ive been in IT for 13 years building PCs and Servers how I knew how to run a 60 FT Cat 5e line thru
a 2 story house and terminate it. Most people don't. Fix the problem.

How I solved issues with Mail.app and Spotlight

Even though my upgrade from Tiger 10.4.10 to Leopard was painless, the new OS X did have a few issues that had bothered me:
*Mail.app: * Every now and then, the app would behave like on its first startup, saying it needs to import my mail before I can work with it. What's more, at times I've had the phenomen that messages would appear empty on the preview pane and sometimes even when being opened.
*Spotlight: * Even though I let the indexing finish on the first day of working under Leopard, every now and then it seemed to start all over. First, I thought it's the NAS being indexed but it just went on to restart indexing each time I thought I had let it finish.
*Free disk space: * I tried to bring the usage of my homedirectory down so I would have enough free disk space to switch FileVault off and then back on so I could start using TimeMachine. But whatever I did, the free disk space just wouuldn't inrease - it just stayed the same (yes, I did let the system recover space on shutdown).
The *free disk space* issue made me think there was a problem with my disk but repeated runs with the Disk Utility yielded nothing...not for about a month. Yesterday I got some warnings about 'damaged but not repaired' but according to an Apple doc those could be safely ignored.
Somebody suggested to apply the combo update for 10.5.1 as that could solve some issues so I went ahead - after all, the update had already been applied earlier so just re-installing wouldn't hurt much, right?
Wrong.
The install of the combo update went smoothly, FileVault recovered some space on shutdown but upon restart I couldn't log in anymore: My homedirectory was damaged. The friendly OS X Leopard offered to repair it but soon later reported back that it failed doing so.
Now, to cut a long story short - deleting the affected user's account and using a different user on the same machine (without FileVault) solved any issues I've had. Mail now works like a charm (despite 40k+ messages with attachments), spotlight doesn't restart all it's indexing and disk space is shown correctly again. Also the odd corrupt file copy I had experienced occasionally (especially with large files) was gone.
My advise to anyone who didn't de-activate FileVault under Tiger to make the switch to Leopard: Even if you think it worked, switch it off and let Leopard set it up again. You may think things went right...but the above shows that there may be issues with it that you may blame other apps for...but they're probably not guilty at all.
I don't think the combo update actually caused FileVault to turn corrupt, it was just what broke the camel's neck. While it's no fun to lose your homedirectory, I'm glad the underlying issue finally came to light.

Thanks to this thread, it's been solved.
https://bbs.archlinux.org/viewtopic.php?id=97653

New Issues with Flash builder - Second time you do search from imported Tutorial file it breaks with AS error

Okay, so I had an issue with the Design View that was broke because of the <s:text> tag inside of the <s:RichText> tag. Adobe fiexed that in one of the next released builds (discussion here in fourms). So I took the tutorial file (again) and started to work on it and all went okay, except that the 'tracking' method on the ricktext tag was taken out. Forums mentioned that. So on import of the 'tutorial' fxp from FC to Flex builder, you get several errors because FC still builds the fxp file with 'tracking' property being used in the RichText tag. No biggie, i just remapped to trackingLeft property in the effected files. Now mind you in the older build that I had this project, worked fine, with the exception of the 'design view' issue with the <s:text> file borking the design view. Bug on it said it was fixed with the next build. which it was but this now when you take the EXACT same code and compile and run it the seach will break each and everytime. Think it has or may have something to do with Adobe taking out the 'tracking' property on the richtext tag.
anyone else having this issue?
attaching the fxp file
btw, posted as a bug FB-21116
https://bugs.adobe.com/jira/browse/FB-21116
Craig

I can recreate the problem but I haven't seen it reported
before. WebHelp has an option that would let you avoid the input
box in the Index but not FlashHelp.
There is information in Snippet 1 on my site about TOC
synchronisation but I don't know if it will help with FlashHelp.
Please report this bug via the Adobe site.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

After installing 2014.3 my site had multiple issues with Google Chrome

After installing 2014.3 my site had multiple issues with Google Chrome. After I rebuilt the home page in 2014.3 the site is still not well. With the old software the site worked well with all the browsers and loaded incredibly. Despite Adobe's claim of a faster load with the new software it is much slower and in Chrome at times it won't load up at all.
The home page had two "Video-Animation light box galleries" by Visual pictures company. One had 12 videos, the other 3 videos. All the videos were streamed from Vimeo. There was also an Edge Animate animation in the middle of the page imported as a .oam file. the rest of the page was nothing special except using some web fonts. Again, these elements worked together well before the update.
After the update everything loads slower in all browsers and in Chrome all types of weirdness happened. Videos would play randomly, all of the audio from all the videos played as the site loaded. Videos would play in the wrong place. Instead of my animation playing a video from the galleries played in it's place instead.
I rebuilt most of the home page using a new video gallery and that helped some what but when I placed the animation.oam file in the page had new issues. To survive, I've taken the Animation out which helped but the functionality is still far from being acceptable. My boss is un my backside, other work is not getting done the stress level is through the roof because I was the one who encouraged using all these new Adobe tools (which I'm paying for personally). Now you broke it with a new update. This is not the first time I've been caught out with problems with updates. I couldn't use SpeedGrade for months following an update. ADOBE MUST VET THEIR

Sorry,
It was slated to go to the Creative Cloud - Muse area. How it got to Photoshop is beyond me.
Bob

Battery issue with iOS 8.2

i have ipad 4 with retina display. Since my upgrade to newer version today to IOS 8.2 .
I Have notice this more than anything my BATTERY IS DRAINING TOO MUCH FASTER NOW, n heating up faster too.
before that I did had issue with battery since upgrade to IOS 8, but now typing this msg 1% is gone. Same for when playing games, watching movies n other work. The drawing time have increased a lot. And I am using my iPad without my cooler master cover too.
please have this fix ASAP. And where is the health app ?

Same here, i have a similar issue..
My iPhone 32Gb 5s (ios 8.1.3) facing this issue too, the battery precentage jumps when using at 61%-59%, 55%-53%, 31%-29%.
I also facing this issue too when it was 8.1.2..
When the precentage shows 59% on the iPhone, i charges it to the iTunes on my MBP, then precentage on the itunes for a while shows yea, it is true 59%.,
I'm waiting for about 3min, the battery precentage on iPhone shows it STILL at 59%, BUT the precentage showed on iTunes is 60% !! And the next 3 minute, the battery precentage on iTunes shows the battery up into 61%, AND when i look the battery precentage on the iPhone, it was JUMPS from 59% directly to 61% !! (that's not showing 60% on iphone)
I assuming it just an iOS wrong battery precentage. (the battery actually isn't broke)
Because when the iPhone unplugged and the battery precentage on the iPhone shows 61% for a while, ACTUALLY at the moment, the battery precentage is JUST PASS THROUGH 60% first, before it turn to 59%. And yea, there's the main trouble, the 60% battery precentage isn't show on the iPhone.
I already do a hard restart the iPhone, calibrate the battery, and even restore the iPhone but it doesn't work.
i Hope in the next 8.2, this issues can be solved.

FYI - High precision data issue with sdo_anyinteract on 11.2.0.3 with 8307

For anyone that may happen to be experiencing issues with SDO_ANYINTERACT on 11.2.0.3 with high-precision geodetic data, I currently have a service request in to fix it.
The issue we have is with locating small polygons ("circles" from 0.5"-4") in the 8307 space. The metadata we have specifies a 1mm tollerance for this data, which has worked fine since (as I remember) 10.1. Support verified it works fine up to 11.2.0.2, then is broken in 11.2.0.3.
So if you are pulling your hair out - stop. ;-) The SR# is 3-5737847631, and the bug# (will be) 14107534.
Bryan

Here is the resolution to this issue...
Oracle came back and said what we have at that tolerance is unsupported and we were just lucky for it to have worked all these years. They are not going to fix anything because it technically isn't broke. We pointed out that the documentation is a little unclear on what exactly supports higher precision, and they noted that for future updates.
When asked if they would entertain a feature request for a set of high-precision operators (basically the old code) in future release - they basically said no. So for the few items that we much have higher precision - we are on our own.
What still makes us puzzled is that apparently no one else is using high-precision data in lat/lon. Amazing, but I guess true.
Anyhow, here is what we used to use (up to 11.2.0.3) which worked fine at a 1mm tollerance:
Where mask_geom is:
mask_geom      :=
         sdo_geometry (2001,
                       8307,
                       sdo_point_type (x_in, y_in, 0),
                       NULL,
                       NULL);
SELECT copathn_id
INTO cpn
FROM c_path_node a
WHERE     sdo_anyinteract (a.geometry_a2, mask_geom) = 'TRUE'
       AND node_typ_d = 'IN_DUCT'
       AND ROWNUM < 2;Basically this finds indexed geometry and compares it to a single mask geometry (a simple point for the x/y given). Only one row is returned (in case they overlapped duct openings - not normal).
Since this no longer returns any rows reliably for items less than 5cm in size, here is our work-around code:
SELECT copathn_id
INTO cpn
FROM ( SELECT copathn_id,
                 node_typ_d,
                   ABS (ABS (x_in) - ABS (sdo_util_plus.get_mbr_center (a.geometry_a2).sdo_point.x))
                 + ABS (ABS (y_in) - ABS (sdo_util_plus.get_mbr_center (a.geometry_a2).sdo_point.y))
                    distdiff
            FROM c_path_node a
           WHERE sdo_nn (a.geometry_a2,
                         mask_geom,
                         'distance=0.05 unit=m') = 'TRUE'
        ORDER BY distdiff)
WHERE node_typ_d = 'IN_DUCT'
   AND ROWNUM < 2;Essentially we use sdo_nn to return all results (distance usually is 0) at the 5cm level. At first we though just this would work - then we found that in many cases it would we return multiple results all stating a distance of 0 (not true).
For those results we then use our own get_mbr_center function that returns the center point for each geometry, and basically compute a delta from the given x_in,y_in and that geometry.
Then we order the results by that delta.
The outer select then makes sure the row is of the correct type, and that we only get one result.
This works, and is fast (actually it is quicker than the original code).
Bryan

LMS 3.2 : issue with custom portal : high CPU

Hi,
Customer has a big issue with LMS.
When he connects to the standard portal, it works fine.
pdshow seems ok.
But when he wants to work with custom portal (portal.jpg), it makes a long time to display information and when he wants select something it hangs.
CPU is very high. He must stoped/restart LMS to have a normal CPU.
I asked him to :
- restart LMS, he made at 14h30
- CPU was ok and he worked with standard portal withou problems but when he tried to put debug for portal CPU increase at 15h30:
Common Services -> server -> Admin -> CS Log Configurations: debug on CiscoWorks Portal, CiscoWorks portlets and CS Home
Process which takes a lot of CPU is tomcat, you will find pdshow.txt, stdout.log and stderr.log.
He tries to go to the custom portal but it hangs, you will find logs from debug : CSHomePage.log and CSPortal.log
he sent me AAD.log because there was " high severity alert".
Many thanks for your help,
Elisabeth

The most obvious problem is that DfmBroker is down. Check to make sure tcp/9002 is not in user, then try a server reboot. See if the AAD problems go away (and perhaps the CPU problem will as well). If not, post the NMSROOT/objects/local/logs/broker.log.

Posting Data Issue with IDOC Type : COND_A03

Friends,
I'm posting the data from Middleware(Message Broker) to SAP using the IDOC Type : COND_A03 with Message Type : COND_A.
For this IDOC,I'm populating the below Segment's data.
Segement :E1KOMG:
Fields:
KVEWE,KOTABNR,KAPPL ,KSCHL,VAKEY ,KONDA,MATNR .
Segement :E1KONH:
Fields:
KNUMH,DATAB,DATBI
Segement :E1KONP:
Fields:
KSCHL,STFKZ,KSTBM,KSTBW,KRECH ,KBETR,KONWA,KPEIN,KUMZA,KUMNE,MXWRT,GKWRT,ZAEHK_IND ,KBRUE,VALTG,
VALDT,ANZAUF,MIKBAS,MXKBAS,KOMXWRT,KLF_STG,KLF_KAL
Problem: In SAP, IDOC's are processing successfully with status 53 and updating the tables : KONH,KONP successfully.
But Table A957 which is passing against KOTABNR field is not pupulating with the Materials passing.
Can anyone please guide me why the Materials are not populating in the table : A957.
Regards,
Sreeram

Hi,
I guess there might be some issue with VAKEY population.
All the key fields in A957 should be concated properly while populating VAKEY. (Leading zeros must be prefixed to the material)
Regards,
Ganga

Issue with Iview Analyze

Hi Experts - I'm just trying to create a simple page with 3 i views which display the PDF documents.
I used KM Document I View template and the preview works perfectly.
When i add them to a page, sometimes it display them properly and sometimes it throws exceptions.
So i tried using the "Analyze" option on the i view and enabled all the categories. When i execute, i'm getting the below error.
Errors in NWA when i access the page -
com.sap.portal.prt.broker.PortalModuleNotFoundException: Could not retrieve portal application ~0_files
at com.sap.portal.prt.broker.PortalAppBroker.ensurePortalModuleIsStarted(PortalAppBroker.java:640)
at com.sap.portal.prt.broker.PortalAppBroker.getPortalModule(PortalAppBroker.java:319)
at com.sap.portal.prt.component.PortalComponentContextFactory.createPortalComponentContext(PortalComponentContextFactory.java:140)
at com.sap.portal.prt.component.PortalComponentContextFactory.getPortalComponentContext(PortalComponentContextFactory.java:82)
at com.sap.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:442)
at com.sapportals.portal.prt.connection.ServletConnection._handleRequest(ServletConnection.java:224)
java.lang.NullPointerException: while trying to invoke the method java.lang.Object.equals(java.lang.Object) of a null object loaded from local variable 'design'
at com.sapportals.htmlb.enums.TrayDesign.getDesignClass(TrayDesign.java:69)
at com.sapportals.portal.pb.PageUtilHook.onComponentBegin(PageUtilHook.java:125)
at com.sapportals.portal.pb.PageUtilHook.doDocumentHook(PageUtilHook.java:77)
at com.sapportals.portal.pb.PageUtilHook.doDocumentHook(PageUtilHook.java:46)
at com.sapportals.portal.pb.fpm.FPM.doDocumentHook(FPM.java:222)
Has anyone faced such issues? The Analyze option works perfectly?
I noticed some difference with KM document template and i created the thread for the same..
KM document Iview template - Issues after upgrade
Please share your thoughts..
Thanks for your time..

We could not re-deploy the EP-RUNTIME due to some reasons..
However issues with iviews has been fixed.
java.lang.NullPointerException: while trying to invoke the method java.lang.Object.equals(java.lang.Object) of a null object loaded from local variable 'design'
at com.sapportals.htmlb.enums.TrayDesign.getDesignClass(TrayDesign.java:69)
We are getting this error as we did not selected anything for the Tray type parameter..
We still get that 0 files error but not sure what is the source/which component is throwing this error. We will continue to investigate.
I'll update this thread incase we found the fix..

Weird issue with Windows Server 2008 R2 Print Server

I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server.
Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors.
We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems.
If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping.
Has anyone experienced anything like this? Any tips on how I could possibly resolve it?
Thanks in advance.

Hi,
According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
>>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
ipconfig /flushdns
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Issue with Datagaurd Broker..

Similar Messages

Maybe you are looking for