Issue with Default Variable in WAD after Java Patch 7.01.7.31

Hello all,
I'm running into an issue with the Web Application Designer Template execution for a particular default variable. This started occuring after Java Patch 7.01.7.31 we had implented over the weekend.
The issue is when Executing the WAD Template, we have a selection screen with a variable with default values assigned to it. When leaving the default values and hitting Ok to execute through the screen does not register and stays as is and I get a message at the top with the following: Characteristic Prob % Number has no master data for "1.00" or you do not have authorization.
This only seems to occur for this default variable on info object Prob % Number, the other default variables seem to work fine. Also another note when clearing out the values it returns data and executes through. The value 1.00 is also a valid value in the cube and also in the output display. If we run this report in the BEx analyzer, the selection screen executes through with the default variable perfectly fine, this is only an issue with the Web Application Designer Template.
Has anyone ran into this? I've searched and have not found any notes as of yet.
Thank you,
-Andy

Dear Andy,
Please raise this to SAP, seems like a strange problem this needs to be addressed by OSS note only.
Close this thread once you get a solution.
Regards.
Den

Similar Messages

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

After Java patch 1.7.0_07 ENable applet plug-in and Web start checkbox is gone!

Hello all,
Using ML 10.8.1 and Safair 6.0
After Java patch 1.7.0_07 ENable applet plug-in and Web start checkbox is gone! The check box to enable Safari to load Java pages is 100% gone, missing, just not there anymore.
When I go to the Java test page it shows that I have Java 7 loaded. Has anyone else run into this problem or have a solution to enable true load loading in Safari and bring back the Enable applet plug-in and Web Start application check box in ML...
Thanks

I found out something very interesting. I noticed that another page would show up for less than have a second before the ML Java Preference would show up. I did a video recording of this and moved frame by frame. I show that the page / pane showing up had the following option:
Run applets: in their own process
within their browser process
Both boxes for the two are unchecked.
Then this page would disappear and nother would show up without the option / check box
Enable applet plugin and Web Start applications
Strange

Variable input values issue with Portal reports in WAD

Hi Gurus,
We have issue with our reports which are created in WAD and when executed through CRM portal. We are executing the report with some selection criteria by changing default values, and once we get the out put we use SAVEAS option to save the report to favourites. But the issue arises when we open the reprot again by clicking OPEN tab next to SAVEAS button. It opens our report, but the selection screen vaues are getting changed to default instead of showing the values which we entered before saving the report.
ex: we have fiscalyear/period: default value is 001.2009 - 010.2009, but i changed the value to 001.2010 - 010.2010 and saved the out put of the report. when i reopen the report useing open option, it is showing 001.2009 - 010.2009 in input screen.
Please let me know if some one has come accross this issue, or is it standard SAP behaviour. It is working fine when executed through Query designer. This is not related to personlization of variabl.es.
Regards,
Yada

Hi Hari,
Thanks for your promp response...but is there any settings to get the variable values with out saving as variant, because its working fine when executing through query designer....
Regards,
Yada

Issue with IP variable binding in WAD

Hi experts,
I'm having issues while trying to bind variable1 to variable2 in WAD. Here's the scenario:
I have configured through T-code rsbbs the QUERY A, which is passing two "generic" characteristic values to the receptor (QUERY B).
These two characteristic values are sent to the variables that are executed by formula (sequence) AND also to the variables in QUERY B.
The issue is when the user changes the variable selection (thru pop-up) for the formula (sequence), it does not update the variable from the Query B, thus, I can't see the correct selection for Query B after executing the sequence.
I've read numerous postings and I tried to bind these two variables (variable from formula sequence to QueryB variable) as a next command after the sequence execution unsuccessfully. The variables are not updated, it always shows the values before the user change.
PS: version 7.
Please help!
Thanks,
Orcamento

Hi Prathish,
Thanks for your reply. However, the issue has not been solved.
Let me try to explain in more detail...
E.g.
Step 1: Query A sends value thru RSBBS to Variable 1 (Query B), and Variable 2 (fox formula from IP) by right clicking on "GO TO" from selected cell>> OK.
Step 2: WAD opens with Query B - with variable values sent from Query A >> OK.
Step 3: User changes value of FOX Variable 2 (this value was first sent from step 1)... let's say that value passed from Query A was 10, and user changes to 20. Then, execute the function >> OK.
Step 4: Since Variable 1 still contains value 10 sent by RSBBS, Query B does not show results just changed (value 20).
I believe that I can bind these two variables through WAD, but I tried unsuccessfully.
Do you know if there are any configuration that I can bind these two variables in WAD, which should work dynamically?
Thank you so much for your help!
Orcamento

Exchange 2013: Problem with Default Global Address List after migration

I just completed a migration from Exchange 2007 to Exchange 2013. The 2007 box has been decommissioned just last week. I have been seeing weird issues with our offline addressbook and global address list, since the migration, but always thought
it was related to Ex2007. Well the issues still exist and here's what i've found so far:
1. If any user goes to Schedule Appointment in Outlook, and they click the Rooms button (on the Scheduling Assistant page), we get a LONG wait (about 5 mins or more) and then an error that says: "The operation could not be completed because
an offline address book is not available. Download a copy of the offline address book." When i click OK, the address book is up, with the "All Rooms" list showing blank (we have 3 rooms in Exchange currently).
2. Now if I go to the Address Book in Outlook it opens to the GAL and it's up to date... I can also force an update to the offline address book after adding a new group or entry, so i know offline address books are being updated properly and
working. HOWEVER, if i go to any of the other address lists (besides Contacts and GAL) under All Address Lists (All Contacts, All Groups, All Rooms, All Users and Public Folders) I get the same error given above: "The operation could not be
completed because an offline address book is not available. Download a copy of the offline address book."
3. I went to the Exchange 2013 EAC and went to Organization -> Address Lists. Everything under here said 'NO' under the Up-to-Date column. When i looked at the properties on each list, and clicked save, I had to update to the new version.
After doing this, the Up-to-Date column said 'YES'. I could do all lists EXCEPT for the GAL. It still says 'NO'
4. The last thing i did was set my Outlook to NOT be in cached mode. This should give me a direct connection to the GAL and all lists, if I'm not mistaken... So when i do this, I cannot even open see the GAL. The ONLY option in the
Address Book that comes up is Contacts (which are my personal ones).
5. I just now ran Get-GlobalAddressList | fl in powershell on the Ex2013 server. I see some things that make me wonder... First; nothing in the RecipientFilter field, however, there is something in the LdapRecipientFilter field.
Second; the RecipientFilterType field says "Legacy". and Third; the RecipientFilterApplied field says "False".
Didn't know what these should all be, but it appears maybe this is the cause of all my issues?? Can someone help me out here.. even if i have to recreate a new GAL, i'm fine with that, I just don't know all the steps to do so. I just need it
to work!
Thanks
Jeff
-Jeff

Hi,
In my opinion, it is better to confirm whether the GAL is good, first.
How about the GAL working in OWA?
If GAL working well in OWA, it seems the issue on the Outlook Client or Connectivity side.
Please trying to run Outlook on the safe mode to avoid some AVs, add-ins and firewall for testing.
Please follow the steps as below to narrow down the OAB issue.
Following are the locations that .lzx files in CAS server and BMX server:
CAS:
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
MBX:
C:\Program Files\Micorosft\Exchange Server\V15\ExchangeOAB
Please verify whether the .lzx files update to the latest.
1. If the .lzx files in MBX server not update to the latest.
It should be an issue on the OAB generation side.
2. If the .lzx files in MBX server is latest, but CAS server not.
It should be a distribution issue.
1) Please run Get-OabVirtualDirectory command in EMS to verify whether at least one OAB VD exist in the org. If not, please create a new one.
2) Please make sure whether any setup for Web Distribution. Selecting the “Enabling an Offline Address Book for Web Distribution” checkbox.
3) Please force restart File Distribution services to distribute OAB files manually.
3. If the .lzx files in MBX server and CAS server are all update to the latest.
It should be the connectivity between CAS server and Client issue.
1)Please verify the network.
2)Please check DNS, MX, etc. configuration.
3)Please run “Test E-mail AutoConfiguration” to check the AutoDiscover details.
   Please make sure the OAB URLs are correct.
   If the OAB URLs are incorrect, please using following command to re-set them:
   Set-OABVirtualDirectory -Identity "ServerFQDN\OAB (Default Web Site)" -ExternalUrl
https://www.contoso.com/OAB -InternalUrl
https://mail.contoso.com/OAB
4)Please checking the App log and finding solutions from Microsoft Technet articles or KB, according to the Event ID.
5)If it still not working after performing the methods above unfortunately, please trying to re-build OAB Virtual Directory.
   Article for reference:
   Remove, Re-Create, and Reconnect an Offline Address Book Virtual Directory
http://technet.microsoft.com/en-us/library/bb123595(v=exchg.141).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Terminal issues with environmental variables

I am having an issue with persisting environmental variables during a session. I am running an app that requires the sequential running of 3 scripts setenv.sh, build.sh, run.sh.
The first script sets variables that are being used by the other scripts. The script just contains lines like
"export ADVISOR_HOME=/Applications/Blaze/Advisor65;"
if i add echo the variables name in the script they are set, but immediately after or with env they are gone.
From my understanding (not much) these should persist as long as the window is open. Is there any setting that is being set in OS X that is sandboxing scripts? It would seem to be security-minded but is causing problems.
Also is there any way to temporarily disable the requirement to prefix a command call with ./ in os x. Many of the included scripts are calling methods in the same directory and I am having to alter a lot of scripts to include ./
Thanks in advance,
walter

walter deane wrote:
I am having an issue with persisting environmental variables during a session. I am running an app that requires the sequential running of 3 scripts setenv.sh, build.sh, run.sh.
The first script sets variables that are being used by the other scripts. The script just contains lines like
"export ADVISOR_HOME=/Applications/Blaze/Advisor65;"
if i add echo the variables name in the script they are set, but immediately after or with env they are gone.
Do you mean you echo them from within the script and then they are gone after the script ends? That would be normal. If you want them to persist through the other scripts, you could combine the scripts. The problem is that you're setting them in one process and expecting them to persist in another process. Unless the second is a child of the first, that won't work. I think it would work if you executed the second two scripts from within the first script because they would then be children of the first process. Does that make sense? I'm not sure of the correct terminology here and I can't draw a tree which is what I want to do! Another option might be to source setenv.sh rather than running it (i.e. wouldn't need to be executable) - the same way the shell does when starting up, I think.
From my understanding (not much) these should persist as long as the window is open.
I don't think it has anything to do with windows. It is just when the process exits. If you set such variables at the command line, they'll persist until the window closes because they'll persist until the process exits which is usually when the window closes. At least, in the simplest cases. But it isn't the window staying open or not that's important. It's that everything else done in the window happens to inherit the environment from the parent process. In truth, this often isn't the case anyway, but I expect that's the source of the misunderstanding.
Is there any setting that is being set in OS X that is sandboxing scripts? It would seem to be security-minded but is causing problems.
Nothing special that I know of. There is stuff for something like this in Leopard but you'd have to enable it and I'm not sure it applies here.
Also is there any way to temporarily disable the requirement to prefix a command call with ./ in os x. Many of the included scripts are calling methods in the same directory and I am having to alter a lot of scripts to include ./
You can do this but it is extremely insecure. Essentially, you can add the current directory to PATH. (PATH=$PATH:./; export PATH) It would be much, much better - much, much safer - to edit the scripts. Can you not use sed to edit them? If there is some sort of pattern, there's no need to do it by hand.
If this is an application you plan to share, you should certainly not consider changing PATH in this way unless you are aiming to produce an application with maximum destructive potential! If you don't plan to share, of course, it is your call!
- cfr

Issue with presentation variables, dashboard prompt and filter

Dear Guru's,
I have a question about constraining a request with presentation variable set by a dashboard prompt. I have a dashboard prompt, that stores its value in a presentation variable . The prompt is about region. When the dashboard opens, the default of the prompt is all choices and it needs to show my reports with "All Choices". I've created the following filter on my two reports on the dashboard:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
One report is just the column "Dim Student"."Region" (to see if it works) and with this report the above filter works just fine. When nothing is prompted it shows "All Choices" when a choice is made the report responds accordingly.
BUT
The second report on my dash with the same region column, but extended with some time dimension columns and a measure gives an error which I'm not able to solve.
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14023] None of the fact sources for ToDate(# Feitelijke Instroom:[DAggr(Feit Instroom en Uitstroom Opleidingen.# Feitelijke Instroom by [ Dim Tijd.Maand Omschrijving, Dim Tijd.Maand Nummer, Dim Tijd.Jaar, Dim Kwalificatie.Kwalificatie Niveau, Dim Leerling.RCBREGIO Regio] )], [Level JAAR]) are compatible with the detail filter [Dim Tijd.Maand Nummer = 3, Dim Tijd.Jaar = 2010].+
+(HY000)SQL Issued: SELECT "Dim Tijd".Jaar saw_0, "Dim Tijd"."Maand Nummer" saw_1, "Dim Tijd"."Maand Omschrijving" saw_2, "Dim Kwalificatie"."Kwalificatie Niveau" saw_3, "Dim Leerling"."RCBREGIO Regio" saw_4, "Feit Instroom en Uitstroom Opleidingen"."# Feitelijke Instroom Cumulatief" saw_5, REPORT_SUM(saw_5 BY saw_0, saw_1, saw_2) FROM repos_x WHERE ("Dim Tijd".Jaar = 2010) AND ("Dim Tijd"."Maand Nummer" = 3) AND (("Dim Leerling"."RCBREGIO Regio" = 'Noord-Oost') OR ('Noord-Oost' IS NULL)) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4+
While the exact same report but without the "or '@{variables.GILLES}' IS NULL" doesn't throw any errors but doesn't show the "all choices" by default.
The ultimate goal to achieve is to build a dashboard with several reports from several subject areas with one single prompt that opens default with "all choices" and constrains the reports accordingly.
Any help is highly appreciated.
Kind Regards,
Gilles

Phani,
I know "All Choices" is a special value and that it doesn't represent NULL. My filter construction seems to work fine.
My filter condition:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
When it's set by the prompt it filters the request accordingly (first condition evaluates to true), when it's not set the second condition evaluates to true and shows all the results (or it's not filtered).
The problem is that it doesn't work when time dimensions are combined with this filter. Then it throws the error mentioned in the first post.
By the way: your suggested solution doesn't work.

Issues with Shared Variables in Systems Running for Extended Periods of Time

I am designing a large SCADA system using LabVIEW DSC and cRIOs. My plan is to use shared variables to communicate the majority of the information across my network (much like "tags" in a normal SCADA system).
I'm wondering if anyone has experienced issues (connection failures, etc...) with shared variables running on systems for months (both real-time and windows based PCs) without the cRIO or PC being restarted/redeploying the variables. What is the stability of the Shared Variable Engine over extended periods of time?
Thank you for the input.
--CLD--
LV 6.1, 8.6.1, 2011 SP1, 2012 SP1

I have a system with 2 cRIO's each with Ethercat extension chassis. Each cRIO hosts ~100 NSV's and is running the scan engine at 40 Hz.
Each cRIO is coupled to a HMI that has front panel control bindings to NSV's hosted on the cRIO as well as a windows hosted mirror library (used for citadel db logging) that is also bound to the cRIO NSV library. The cRIO's have monay months of contiguous run time without reboot and I closely monitor cpu and memory usage and also rt performance metrics and will log faults if there are any such events. I also use NSV's for messaging from the HMI to the cRIO for such things as setting zero offset values and deploying configuration parameters. My overall findings are that the SV engine and the PSP are stable and efficient (especially NSV<->NSV and NSV<->HMI binding)

Issue with declaring variable

I am developing a multiuser application in flash, using smartfox server and as 2.0, but i am having an issue with defining/declaring a variable/object/array, and then accessing it. I am attempting to define "curMap" (whether it be a variable, array, object, whatever works) within the following function, as the returned array from the server, "resObj". This works fine as long as i only call up "curMap" WITHIN this function(as you see in the line : r_txt.text = curMap;) however whenever I try to call up "curMap" on the frame coding, outside the function, it comes back as undefined, or typically nothing. Any Ideas as to how to properly do/assign this? I have tried various things(such as _root., _global, or defining the var "curMap" outside the function) with no luck.
Here is my Code:
smartfox.onExtensionResponse = function(resObj:Object, type:String)
        if (type == "xml")
                if (resObj._cmd == "getMap")
                    curMap = resObj.db[0];
                    r_txt.text = curMap;
                }else if (resObj._cmd == "getSurr"){
                 surrMap = resObj.db;
                 b_txt.text = surrMap[0];
thanks

ahhh! yup that fixes it, thanks!

Issue With OLAP Variable

HI all,
we have an issue with the OLAP variable. One of the SAP olap variable(0P-perf1) is processed as Authorisation. where it should be sap exit. When we try to change at the BEx analyzer it was in disabled status.
My question here are :
1) How we can change the processing type?

Hi,
Pls refer link
creation of OLAP Variable
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55ece09411d2acb90000e829fbfe/frameset.htm
It may help you.
Thanks
Edited by: npathak on Aug 4, 2010 4:09 PM

Issue with substitution variable with @MDSHIFT in BR in Calc Manager

Hi Experts,
We have a BR in EAS which is working fine.
and exported to Calcmanager, now while validation it is giving error "@BaseScenario" is not found.
the code is
@MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->&BaseScenario->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",);
if i hard code it like @MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->"P7PP"->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",); working fine.
is there any limitation with calc manger and substitution variables?
Thanks
GP

There seems to be many issues with validations in calc manager, does the rule run if you dont validate.
Cheers
John
http://john-goodwin.blogspot.com/

Issue with "firstRecord" Business Component method of JAVA Data bean API.

Hi,
Following is my use-case scenario:
I have to add or associate child MVG business component (CUT_Address)
with the parent business component (Account) using JAVA Data bean API.
My requirement is: first to check whether child business component(i.e. CUT_address) exists. If it exists then associate it with parent business component (Account)
otherwise create new CUT_address and associate it with account.
Code (using JAVA Data bean APIs) Goes as follows:
SiebelBusObject sBusObj = connBean.getBusObject("Account");
parentBusComp = sBusObj.getBusComp("Account");
SiebelBusComp parentBusComp;
SiebelBusComp childBusComp;
// retrieve required account.. Please assume Account1 exists
parentBusComp.activateField("Name");
parentBusComp.clearToQuery();
parentBusComp.setSearchSpec("Name", "Account1");
sBusComp.executeQuery2(true, true);
sBusComp.firstRecord();
Counter = 0;
while (counter < Number_Of_Child_Records_To_Insert)
childBusComp = parentBusComp.getMVGBusComp("City");
associatedChildBusComp = childBusComp.getAssocBusComp();
childBusComp.activateField("City");
childBusComp.clearToQuery();
childBusComp.setSearchSpec("City", Vector_of_city[counter]);
sBusComp.executeQuery2(true, true);
if( sBusComp.firstRecord() )
// Child already exist and do processing accordingly
else
// Child does not exist and do processing accordingly
childBusComp.release();
childBusComp = null;
associatedChildBusComp.release();
associatedChildBusComp=null;
Now the issue with this code is: For the first iteration, SbusComp.firstRecord returns 0 if records does not exist. However from the second iteration, SbusComp.firstRecord returns 1 even if there is no record matching the search specification.
Any input towards the issue is highly appreciable.
Thanks,
Rohit.

Setting the view mode to "AllView" helped.
Thanks for the lead!
In the end, I also had to invoke the business component method SetAdminMode with "true" as the argument so that I could also modify the records from my script.

Issues with Samsung Galaxy Tab S after installing 5.0.2

Hi all, After updating to the latest firmware I have had nothing but issues leading to the tablet now being useless. Power drains in seconds dropping from 53% to 2% in 3 minutes and loosing mobile connection every few minutes. The tablet turns itself off constantly and it is completely useless. I have done the usual, deleted cche partitions's, soft reset, complete reset, deleted all data on SD card inserted and checked SIM in my phone to make sure it works. Anyone else had these issues or other, this is redicoulus. After waiting months for the same update for my Galaxy Note 3 I am staring to have other issues with this also and this is very worrying. many thanks

The update is FOTA. Your device will notify u when its your turn. They send them out in batches.
Now you can take it to a best buy to the Samsung experience center and have them flash it. Also a Att device support center can do it.

HT4623 having issues with activating my iPhone 3gs after upgrading to ios6. Tried activating via itunes but no respite " says No sim inserted". pls help.

Guys, I just upgraded my iphone 3gs to ios6, it took 2 hours get it installed. However asfter installing there are issues with activating it.
Its getting failed every time..."says the activation server is temporarily unavailable".
Tried activating via itunes but no respite " says No sim inserted".
pls help.

No, I did not find a way to fix it. Went to Apple store to be told that the phone is dead and I would need to purchase a new phone. A little frustrated with the fact that it is Apple who caused the phone to not work!

Issue with Default Variable in WAD after Java Patch 7.01.7.31

Similar Messages

Maybe you are looking for