Issue with delta load from R/3 to BW

Hi frnds,
There is a standarded D.S 2LIS_05_ITEM in R/3. Evereday We extraceted data from R/3 to BW based on this standard Data Source with delta load.There are two fields ZX and ZY in BW ,some times the data haven't extracted for this 2 fields in BW with the delta update.But some times this 2 fields properly extracted in to BW with the same delta update.
Why is it happen like this ? Please give some inputs on this.
Regards,
Satya.

Hello,
if its a standard field then its getting populated in correct way.
if its custom field then you need to analyze the records for which its getting populated and for one which its not.
Quite possible that some cutomization in CMOD results in this behaviour.
Also,check underlying tables to see the correct values.
Regards
Ajeet

Similar Messages

Issue with a load from R3 to BW 3.5

Hi Guys,
We are having an issue here with a load from R3 to BW 3.5 to an ODS and
a transactional infocube.
In a daily basis we are running loads to BW from R/3 infosets and all
of them but one loads fine.
The one that is having problems is actually the one that loads more
data, therefore the infopackage is divided into two infopackages.
In the update rule of the first ODS we are running an initial routine
in which we are doing a RSDRD_SEL_DELETION (selective deletion) of the
data to be loaded to both the ODS and the infocube, and is actually
here where we got the core dump.
Our first assumption was that maybe there was any yellow request in the
transactional infocube avoiding the selective deletion but we have
discarded this.
We think that, as the only one failing is the one that divides into two
infopackages, the problem might be that at the moment that the first is
triying to delete the second one is loading data into the ods and there
we get the dump.
The question here is ¿Could this be the problem? ¿How could we
workaround this if this is the case?
Thanks for any suggestion.

Hi,
Be carefull on ODS activation, if you're using 2 infopackage and/or deleting data from an ODS which is lock for an activation, you'll occurs a dump.
Check SM12 / ST22 / SM21 and job logs in SM37.
And if pb still occurs for a load, debug it in start routine.
Regards,

Issue with Delta Load in BI 7.0... Need resolution

Hi
I am having difficulty in Delta load which uses a Generic Extractor. The generic extractor is based on a view of two Tables. I use the system date to perform the delta load. If the system date increaes by a day, the load is expected to pick up the extra records. One of the tables used in the view for master data does not have the system date in it.
the data does not even come up to PSA. It keeps saying there are no records.... Is it because I loaded the data for yesterday and manually adding today's data...?
Not sure what is the cuase of delta failing....
Appreciate any suggestions to take care of the issue.
Thanks.... SMaa

Hi
The Generic DataSource supports following delta types:
1. Calender day
2. Numeric Pointer
3. Time stamp
Calday u2013 it is based on a calday, we can run delta only once per day that to at the end of the clock to minimize the missing of delta records.
Numeric pointer u2013 This type of delta is suitable only when we are extracting data from a table which supports only creation of new records / change of existing records.
It supports
Additive Delta: With delta type additive delta, the record to be loaded only returns the respective changes to key figures for key figures that can be aggregated. The extracted data is added in BI (Targets: DSO and InfoCube)
New status for changed records: With delta type new status for changed records, each of the records to be
loaded returns the new status for all key figures and characteristics. The values in BI are overwritten (Targets: DSO and Master Data)
Time stamp u2013 Using timestamp we can run delta multiple times per day but we need to use the safety lower limit and safety upper limit with minimum of 5 minutes.
As you specified, the DS is based on VIEW (of two tables, with one containing date and other does not).
Kindly check the above lines and verify, if the view (primary key) could be used to determine the Delta for your DS.
Also let us the if any standard SAP tables used in creating VIEW and if so, what is the size of the DS load every day?
Thanks.
Nazeer

Issues with Delta Loads.

Hi All,
I hope you don’t mind to provide a suggestion about the delta load of Purchase Orders.
There was a request from Procurement team and they complaint that the data is not looking right.
For example: for a given purchase order the exemption flag is displayed as ADE.
Before change:
Purchase Doc Number
Puchase Exemption flag
90002106
ADE
They want this to be displayed as:
After Change :
Purchase Doc Number
Puchase Exemption flag
90002106
So ABAPER has included the logic in ECC Functional Module to populate the Extract Structure for Data Source to display above result. But the overnight run didn’t pick up the changes to above record in BW. The loads are delta loads.
So my Question is:
· This load for the Infocube Purchase Orders is delta load. Does change to Function Module will pick up the changes to old records as well? I mean if we are doing delta load does the old records gets changed and updated in CUBE or should I delete the data from all the PSA and Infocube and run the load into CUBE to pick up the changes. Am bit worried about deleting the data from Infocube as it may have history data (because of delta load). Total records in cube are 800000 records.
· Another question does the process chain trigger the function module to load the data into Extract Structure of data source in ECC (am bit confused about this process in ECC)?
Please suggest me how can I capture those changed records?
Any help would be much appreciated. Please let me know if you need more info.
Thanks in advance
Sandeep

Hi Sandeep,
I am little confused from your post. You are using 2lis_02_SCL or the generic FM datasource?.
Also it looks like new custom field added in your client. I never saw any purchase exemption flag even though i am working in purchasing flow for last 2 years.
W.r.t purchasing , deletion flag will be there which will come from EKPO and have the values S or L ( Deleted or Blocked).
You can block or delete a PO aslong as GR was not happened. Other wise you can do it. So use the EKPO-LOEKZ for your use.
Regards,
Rajesh

Issue with Data Load from R/3

Hi,
I have created a generic data source in R/3 based on the option Extraction from SAP Query. the SAP Query (Infoset) created in the TCODE SQ02 is based on the tables BKPF and BSEG. I have generated a Data source on this and successfully replicate dinto BW but when i trigger the load uing infopackage it immediately fails and gives the following messages.
*If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.*
+Job terminated in source system --> Request set to red+
Can you point where the issues is. I have tested the source system connection and it is fine as other extractors are working fine and data can be pulled
Thanks
Rashmi.

Hi Rashmi,
Try the following:
- RSA3 in source system -> test extraction OK?
- Shortdump (ST22) found in BW or R/3?
- Locate the job of the extraction in R/3 (SM37) and look at the joblog...
Hope this leads you to the cause...
Grtx
Marco

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

Issue with Delta in Function Module

Hi Team,
I have an issue with delta in Genric extraction using function module.Full load is working fine and i have taken post_date as delta field.plz chk the code if any delta related statements are missing.
FUNCTION ZRSAX_BIW_MANGEMENT_RAT .
""Local interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZQMBW_FUJ_MANAGEMENT OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table MANAGEMENT RATING
TABLES: ZQMBW_MANAGEMENT.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
          S_CURSOR TYPE CURSOR.
RANGES: POST_DATE FOR ZMMTVEND_RATING-POST_DATE,
          VENDOR FOR ZMMTVEND_RATING-VENDOR.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZQMMANAGEMENT_DS'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'VENDOR'.
        MOVE-CORRESPONDING L_S_SELECT TO VENDOR.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = VENDOR-LOW
          IMPORTING
            OUTPUT = VENDOR-LOW.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = VENDOR-HIGH
          IMPORTING
            OUTPUT = VENDOR-HIGH.
        APPEND VENDOR.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'POST_DATE'.
        MOVE-CORRESPONDING L_S_SELECT TO POST_DATE.
        CONCATENATE L_S_SELECT-LOW6(4) L_S_SELECT-LOW3(2) L_S_SELECT-LOW+0(2) INTO POST_DATE-LOW.
        CONCATENATE L_S_SELECT-HIGH6(4) L_S_SELECT-HIGH3(2) L_S_SELECT-HIGH+0(2) INTO POST_DATE-HIGH.
        APPEND POST_DATE.
      ENDLOOP.
**Get Management rating details
      OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT VENDOR POST_DATE OVERALL_MNGT_RAT OVERALL_DEV_RAT FROM ZMMTVEND_RATING WHERE VENDOR IN VENDOR AND POST_DATE IN POST_DATE .
    ENDIF.
Fetch records into interface table.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.

Hi
Check URLs:
How to populate the ranges using FM for the SELECTs
Re: Generic Delta Function Module

Table on delta loads from data mart

Hi,
I am loading data from two DSO's (let's call them A and B) to another DSO (B) in BI 7 with a BW3.5 delta infopackage.
Now I want to know where I can find information on the timestamp or last request from the last delta load from A and B to C.
So in fact I would like to know how the system knows which requests in A en B have not been loaded to C yet at the next delta load.
In which table can I find the information for ODS A and B that is used by the system to define what data in the change log has been loaded or not to ODS C or other targets. (In fact I should have a comparison table in BW as ROOS* in R3)
Thanks in advance!
Kind regards,
Bart

Hi Guys,
Thanks for the answers.
I know how to check everything in the Workbench, but I want to know where the information of the delta is stored technically.
Just for the sake of completeness:
Due to some issues; several successive loads from A and B were correctly loaded into DSO C (the 'new' table), but could not be activated. It is not possible to do a repeat or anything else. I am not going into too much detail, but just take this for granted.
The only way we can 'solve' the problem is to make the system believe that the 3 last loads (activated data) in A and the two last loads in B have not been loaded to C yet. Just deleting the last delta's in C and do a new delta from A and B to C will not work.
Therefore I want to 'manipulate' the table that is being read by a delta load. If I can change the timestamp or request numbers in that table, I can make the system believe that some requests have not been loaded to C yet.
Dirty, but it should work I think. But I am still figuring out what table contains information about the datamart data source (8A and 8B) and the last delta load to the targets.
Hope this is more clear.
Thanks in advance!
Kind regards,
Bart

Delta Load from CRM- picking up 0 records

Hi Gurus,
Iam trying to load CRM data into BW ODS using datasource 0crm_quotation_I. This load used to work fine about a month ago in Delta mode. But it started failing and so I ( my colleague deleted all the old requests) did an full repair and then an Init w/o data and when i schedule teh delta iam getting 0 records. Can anyone please throw light on this?/
Also is this could be an issue with Delta queue in CRM?/
Please reply..
DV
null

Hi Rajani,
Hi rajani with Init the process will take long. just for 50000 records it took 3 hrs and if we do init it will load all teh records from CRM and will take plenty of time. so we did a selective full load and used a program to convert them into full repair and thn did an int...
DV
null

Problem with delta load urgent!!

Hi,
I have a problem with delta load
We have an IP, which loads data from R/3 system daily, its a delta load to the ODS and it updates to the cube with the selection on Company Codes and 0FISCPER
we are in 3.5 system
For a couple of company codes A & B, the init was done for the period 07.2010 to 12.2099 and after tht the deltas are loaded from 07.2010 till 12.2099 and there's no pblm with tht
Now, there was some updation in R/3 system and the data was maintained for the company codes in A& B for the FISCPER 001.2010 to 006.2010, for which init wasnt maintained...
now how shall we need to load the init in this case? dnt ask me how the postings was done in R/3, but my pblm is purely related to the loading data in BW from R/3, as its very imp for the customer to see the data from 01.2010 to 12.2010 in reports, but the data was only available in reports from 07.2010 onwards
do i need to create another IP and maintain the init for 01.2010 to 06.2010? so tht this selection will automatically appear in the ODS delta loading infopackage
pls throw ur inputs ASAP
thank you

Hi Prince,
No need to maintain any Init for this data, It will be enough if you can load the data from jan 2010 to jun 2010 into your Info Cube.
Follow the below steps:
1)create full load IP for this data source.
2) give the selection as A and B company codes and 0FISCPER as 001.2010 to 006.2010
3) in menu bar, click on scheduler --> select full repair request
4) In the next screen check the check box and save
5) Now execute the IP, it will the data with out disturbing your daily delta.
follow the same procedure to load data till to your Info Cube.
Please revert if you have any questions
Regards,
Venkatesh

Process for Flat file delta load from Application server to transactional??

I want to do a flat file extraction in delta loads from application server and that should be loaded into a transactional cubes scheduling a process chain.
Can any one help with ABAP code and step by step process for this?
Thank you
Devi

Hi Devi,
As per your explaination, you want to load a list of files from application server using process chain.
You can do this with below steps.
1) Create a Event and call event to run Process chain multiple times.
2) Put all filenames in a file say, source-File
3) Write a rooting to read filename from Source-File and trigger InfoPackage
4) At the end of the process chain create new customized program which will delete first line from Source-File so that it will take next file in next run as well as delete currently loaded file. Once this is done trigger event again to start process chain again.
Regards,
Ganesh

Delta load from planning area to third party system

Hi All,
Generally we sent full data load from DP planning area to back up cube in BW system..But suppose we are to send delta load from DP planning area to third party BW system, then what changes we need to do on the DP planning area side so that we send all the changed data from livecache. Can this be done in a standard way?
Thanks

Hi Tarun,
It's not possible to extract delta loads from the APO planning areas. The delta loads are only possible with standard BW objects, and planning area is not a BW object.
SAP doesn't provide the functionality to have delta loads when you use export data source based on the planning area.
PS: From backup point of view, anyway having delta load would not make much sense. We take the backup as a snapshot of a particular time, and if restoration is required, based on the request numer or the date of extraction, we restore the relevant data from cube to the planning area.
Thanks - Pawan

Because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem

because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem, atualmente when lighting the computer among the processes that are loaded when beginning the computer is a process of name firefox.exe with a load of between 30 and 50000 kb but I don't find to the registered firefox inside the programs to crgar from the beginning when entering for msconfig.exe my operating system is so far windows xp up-to-date sp3 and my firefox is 7.0.1 version in Spanish that is my native language.

That seems very suspicious. Two suggestions.
First, try Firefox's Safe Mode. This will let you work around problems with add-ons and perhaps help you identify things to remove so that Firefox goes back to normal.
I recommend making a backup of your Firefox settings before starting in Safe Mode. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, try starting Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does that work? If so, you may need to disable your add-ons and just bring the most essential ones back to life until you discover the problem one.
Second thought: malware. You could supplement your usual security scans with these:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/
HouseCall : http://housecall.trendmicro.com/
Hope this helps.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

Issue with site load time when exported as HTML. Addressed?

Has the issue with website load time been addressed?
I believe the site attempts to load the entire image content at the initial visit - meaning any galleries with numerous pictures are all included when first getting to the site. This is causing a HUGE increase in load time. I was told when I last brought it up that it was an apparent issue that needed to be addressed.
Any type of resolution coming?
Site for reference: www.dkrecollection.com

Major updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow.

Issue with delta load from R/3 to BW

Similar Messages

Maybe you are looking for