Issue with displaying QM control chart for specific date range

Dear All
In our chemical mfg organisation, we just implemented SAP QM solution and things are working fine. I have implemented control  chart functionalities as below:
SPC Criteria in Inspection Plan: Task List Charateristics / Material (0020)
Sampling Procedure: Fixed Sample / SPC Inspection (without inspection point)
We use process orders to get the inspection lots for products (material) and record results for the MICs and UD the inspection lots.
Currently all our Control Chart have status 1 (created) and we have not moved any of those charts to status 3 and 5 yet.
Using QGC1 when user trying to run control chart for any particular material in the plant and for a specific date range, report showing all the charts for that material with different MICs as expected. Though the result is NOT restricted to the selection dates either against "Lot Created On" or " Insp. Start Date" ( may be due to SPC criteria????) , its always showing all the result for any particular MIC for that material starting from go live till today.
How to restrict the dispaly of result on the chart for any particular MIC against the Material / Plant within a specific date range ?
Looking forward for your response.
Best Regards
SK

Hi,
1. Even though when i give the Created on, and to date the system is displaying the report which is prior to the created on date.
2. Similarly the report data is different when the field is maximum no of Hits is given. for example when i giving this field as 10, 20, 30, etc the report is showing only 10 line items. if i enter 50, 60 etc it is showing the list for half i given.
Note that system is having more than 1000 line items to display..
Regards,
R. Loganathan

Similar Messages

  • Issue with displaying multiple line charts in same applet at a time

    Can you please help me in displaying the 3 different line charts  in a same applet at at  a time.
    And these 3 line charts  taking the data from 3 different queries.

    An applet can only be fed by a single query template - have you considered the AggregateQuery, or an XacuteQuery?

  • How to see Control chart for a specific date range in QGC3

    Hi
    I am developing SPC for my client.I am facing one problem.
    I am using one control chart for all inspection lot for a particular MIC.Free inspection point is used in inspection plan.
    Control chart is used 516.(XMR chart)
    Now when i am calling control chart for MIC executing QGC3,chart is showing results since creation chart date to todays date.
    Now if i want to see chart for a particular period or date range,what is the procedure.
    Thanks in advance
    Nilanjan

    Hi,
    1. Even though when i give the Created on, and to date the system is displaying the report which is prior to the created on date.
    2. Similarly the report data is different when the field is maximum no of Hits is given. for example when i giving this field as 10, 20, 30, etc the report is showing only 10 line items. if i enter 50, 60 etc it is showing the list for half i given.
    Note that system is having more than 1000 line items to display..
    Regards,
    R. Loganathan

  • Performance Issue With Displaying Candidate Details for iRecruitment

    We are in EBS R12.1.3 when we trying to display the Candidate Details page in iRecruitment iRecruitment >vacancies>applicants> click on applicant>   the page spins for  a quite whille to show the results and some times we see the 500 errors..
    We are in R12.1.3 and also applied the  Patch.10427777:R12.IRC.B patch.. is there any  tunnign steps for the iRecruitment  page=/oracle/apps/irc/candidateSearch/webui/CmAplSrchPG

    You have already applied the patch mention in note: Performance Issue With Displaying Candidate Details Page in 12.1.3 (Doc ID 1293164.1)
    check this note also Performance Issue when Clicking on Candidate Name (Doc ID 1575164.1)
    thanks

  • Issue with displaying summary in the Page Bottom

    Hi Friends,
    I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
    I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
    If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
    for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
    But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
    Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
    Regards,
    Subbarao

    HI,
    Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
    Eg: Protect
    bottom
    text
    endbottom
    endprotect.
    Regards,
    Venkatesh

  • Issue with displaying Unicode Characters returned by a webservice

    Hi, We are developing a mobile application which provides multi language selection (Arabic & English). but we are having an issue with displaying returned JSON which has Arabic text. The output we get is as below. Our .net client throws the following
    exception. Appreciate your kind help and thank you in advance.
    [net_WebHeaderInvalidControlChars]
    Arguments:
    Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=4.7.60408.0&File=System.Net.dll&Key=net_WebHeaderInvalidControlChars
    Parameter name: name”
    Returned JSON:
    https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar
    Connection ? Keep-Alive
    Content-Type ? application/json; charset=UTF-8
    Date ? Fri, 27 Feb 2015 03:35:43 GMT
    Keep-Alive ? timeout=1, max=100
    Last-Modified ? Thu, 26 Feb 2015 14:43:55 GMT
    Link ? <http://72.44.81.184/~shababcapital/wp-json/posts/131>; rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/119>;
    rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/118>; rel="item";
    title="اÙ?جÙ?در Ù?ؤÙ?د استÙ?رار "اÙ?شباب Ù?اÙ?رÙ?اضة" فÙ? دعÙ? Ù?سÙ?رة اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/117>; rel="item"; title="اÙ?جÙ?در
    Ù?Ø´Ù?د بدÙ?ر اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب", <http://72.44.81.184/~shababcapital/wp-json/posts/55>; rel="item"; title="اÙ?جÙ?در: Ù?دفÙ?ا
    تحÙ?Ù?Ù? أفضÙ? فرص استثÙ?ارÙ?Ø© Ù?Ù?Ø£Ù?دÙ?Ø© اÙ?Ù?Ø·Ù?Ù?Ø© Ù?Ù?بارÙ? اÙ?Ù?شرÙ?ع اÙ?جدÙ?د", <http://72.44.81.184/~shababcapital/wp-json/posts/45>; rel="item"; title="اÙ?جÙ?در Ù?Ø´Ù?د بدÙ?ر
    اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب"
    Server ? Apache
    Transfer-Encoding ? chunked
    X-Content-Type-Options ? nosniff
    X-Pingback ? http://72.44.81.184/~shababcapital/xmlrpc.php
    X-Powered-By ? PHP/5.4.24
    X-WP-Total ? 6
    X-WP-TotalPages ? 1

    I originally downloaded it using IE and viewed the content in Fiddler.  Use this code to get the content:
    string url = "https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar";
    HttpBaseProtocolFilter MyFilter = new HttpBaseProtocolFilter();
    MyFilter.IgnorableServerCertificateErrors.Add(Windows.Security.Cryptography.Certificates.ChainValidationResult.InvalidName);
    HttpClient request = new HttpClient(MyFilter);
    string response = await request.GetStringAsync(new Uri(url));
    MyContent.Text = response;
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Issue with displaying Greek characters in Oracle 11.1

    Hi,
    We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
    I believe that it is a issue with DB settings, although not sure of what is the setting.
    Below is the result after running the query: select * from nls_database_parameters
    NLS_LANGUAGE     AMERICAN
    NLS_TERRITORY     AMERICA
    NLS_CURRENCY     $
    NLS_ISO_CURRENCY     AMERICA
    NLS_NUMERIC_CHARACTERS     .,
    NLS_CHARACTERSET     AL32UTF8
    NLS_CALENDAR     GREGORIAN
    NLS_DATE_FORMAT     DD-MON-RR
    NLS_DATE_LANGUAGE     AMERICAN
    NLS_SORT     BINARY
    NLS_TIME_FORMAT     HH.MI.SSXFF AM
    NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
    NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
    NLS_DUAL_CURRENCY     $
    NLS_COMP     BINARY
    NLS_LENGTH_SEMANTICS     BYTE
    NLS_NCHAR_CONV_EXCP     FALSE
    NLS_NCHAR_CHARACTERSET     AL16UTF16
    NLS_RDBMS_VERSION     11.1.0.6.0
    Please help.

    869852 wrote:
    Hi,
    We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
    I believe that it is a issue with DB settings, although not sure of what is the setting.
    The first question that needs to be answered is whether the problem is a data storage problem or data presentation problem.
    The query below will answer this question.
    SELECT ASCIISTR(greek_column) from greek_table where key_id = <specific_value>;

  • Sync with Outlook ONLY for a specific date range

    I have a Zire 31 that I'm syncing with Outlook via latest Palm Desktop/HotSync.   I did just install the latest conduit.
    I was getting several repeating calendar entries that were not syncing with the Zire (annual birthdays, etc.) - turns out that they did not have an "end-date" specified when created in Outlook.  Creating an end-date solved the problem.
    However - I would like to know if it is possible to specify a certain date range for the device to sync (e.g., sync calendar only for years 2007 through 2050, or in other words sync from 1 year ago to 50 years in future, etc...)
    I recall specifying this once years ago, but I may have been using a third party to sync with Lotus Notes at the time.  I'm wondering if this option is also available with syncing directly with Outlook using HotSync???  I can't imagine it's not, but I can't find where you specify it.
    One more interesting note:  while my Zire 31 had issues syncing those repeating calendar entries - my much older HandSpring Visor Deluxe syncs them no problem!  Go figure.
    Thanks much -
    Post relates to: Zire 31

    I'm not actually looking to purge old items.
    Rather - I would like to ONLY sync calendar entries between a specified range of dates.  For example - ONLY sync for calendar entries between Jan 1 2007 and Jan 1, 2050.
    the problem is that I have some repeating entries (birthdays, etc.) that are set up in Outlook with no end date.  Apparently Palm/HotSync is having trouble syncing these (they don't show up at all - for any year.)
    One resolution is to apply an end-date for each repeating calendar entry.  However, this is just another step my wife needs to remember to do.  If you happen to forget to to this, then Hotsync will ignore that entry.  Fine if you realize that's happening, but if you forget and forget to check - you won't even know it didn't sync!
    The other possible resolution is to only have HotSync sync for a SPECIFIC date range - one that does not presumably go to infinity.  That is my question - how does one sync ONLY for a specific date range.  Has nothing to do with purging old entries.
    Thanks!!
    Post relates to: Zire 31

  • Issues with Safari 3.0.1 for windows

    Issues with Safari 3.0.1 for windows (at work):
    Lenovo T60 with intel core duo T7200 @2.00Ghz plus additional monitor (Lenovo ThinkVision) in extended desktop mode running Windows XP Pro 2002, SP2
    1. Taskbar is configured to autohide: when Safari is the top (active) window, it remains on top. If the taskbar pops up, it does so behind the Safari window, because I cannot see it.
    2. If an open Safari window is dragged to the external (secondary) monitor, then maximized, it disappears to the side. It is not closed. I can still find it via Alt-tab or in the task bar and can, by right-clicking ‘Move’ from the taskbar use the arrow keys to move the window back into place. Clicking to reduce the window, then re-maximizing leads to the window disappearing to the side again.
    3. In general my impression is that this does not function at a ‘beta’ level, but more of an ‘alpha’ level. Still very buggy.
    Jcw
    iMacIntel Duo 2Gh   Mac OS X (10.4.7)   1G-RAM, 250vRAM
    iMacIntel Duo 2Gh   Mac OS X (10.4.7)   1G-RAM, 250vRAM

    This is a beta...thats why they give you the option to report probs via the bug icon. Since you are having these probs try and report them, I am not sure if apple has the time to scan these forums to try and find the big probs that people are having. So unless you report bugs, (and wait until the final realease) then they might never get noticed and or fixed.

  • Issue with displaying text in BEx

    Hi all,
    We are facing an issue with displaying text in the query output.
    We have a master data carrying charac ' 0MATERIAL'.When i do maintain master data ,I am able to see medium description in the output.
    Now when i drag 0MATERIAL in bex designer and in properties set display to key and text(medium text), it shows me only the key and it shows some wierd text which is in no way related to the medium description ( that was shown under maintain master data)
    can anyone pls tell me why i am not able to see the medium description when executing the query that too when the text is loaded.
    Pls help
    Regards,
    Suchitra

    But what i wouldlike to know is what about the master data which is present in 0MATERIAL now?
    Nothing will happen to your data.
    Its showing there ...dosent that mean its present and activated?
    They are present n in active version.
    If u change any records they will be in M version..by activating the data...u are converting it to A version.
    Regards,
    Ram.

  • Count records for a specific date range

    Hi,
    I am using BI Publisher with Siebel 8.1.1.1. I have a monthly report where I want to count the number of service requests entered per customer per month.
    I am using the following expression that works for one month:
    <?count(ssServiceRequest[ssSeverity[.='1-Critical'] and xdoxslt:date_diff('d',psfn:getCanonicalDate(ssCreated), xdoxslt:current_date($_XDOLOCALE,$_XDOTIMEZONE), $_XDOLOCALE, $_XDOTIMEZONE) <=28])?>
    However, I want to be able to specify a specific date range for my count, i.e ssCreated >= '01/02/2011' and <= '28/02/2011', as opposed to count for the past 28 days. Can you please advise what syntax I can use to specify a date range?
    Any help will be greatly appreciated!
    Claire

    Hello,
    Many many thanks for your reply.
    I'm doing as you suggest and am using the date_diff to the end of the period in question. I've tried the following to get the number of Service Requests with Severity 1-Critical, created in Jan 2011, feb 2011:
    <?count(ssServiceRequest[ssSeverity[.='1-Critical'] and xdoxslt:date_diff('d', (psfn:getCanonicalDate(ssCreated), $_XDOLOCALE, $_XDOTIMEZONE), '2011-01-31', $_XDOLOCALE, $_XDOTIMEZONE) <=31])?>
    <?count(ssServiceRequest[ssSeverity[.='1-Critical'] and xdoxslt:date_diff('d', (psfn:getCanonicalDate(ssCreated), $_XDOLOCALE, $_XDOTIMEZONE), '2011-02-28', $_XDOLOCALE, $_XDOTIMEZONE) <=28])?>
    In my xml sample data that I'm using I have 2 service requests that mean the criteria for Jan, yet when I run my report I'm getting '0'. The problem seems to be with my end of period date '2011-01-31'. I've also tried with both start and end period date (using a negative value as per your suggestion), but I still get '0':
    <?count(ssServiceRequest[ssSeverity[.='1-Critical'] and xdoxslt:date_diff('d', (psfn:getCanonicalDate(ssCreated), $_XDOLOCALE, $_XDOTIMEZONE), '2011-01-01', $_XDOLOCALE, $_XDOTIMEZONE) <=-31 and xdoxslt:date_diff('d', (psfn:getCanonicalDate(ssCreated), $_XDOLOCALE, $_XDOTIMEZONE), '2011-01-31', $_XDOLOCALE, $_XDOTIMEZONE) <=31])?>
    Many thanks,
    Claire

  • User login report in Active Directory for specific date and time

    I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
    Is any query, script or any tool available?
    Waiting for reply please

    You can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
    If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
    I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Ical searches with specific date range

    We post the people who are to work at specific events in the notes field of ical. Is there a way to search for these peoples names on the web via ical.php within a specific date range? No matter what date I have set to look at on the calendar the search grabs everything in the past. I only want future events that this person is associated with. Thanks for helping if you can. Jake

    Hi,
    You want to run the report on specific date without 0CALDAY?. Without 0CALDAY you can't restrict the report for specific day. So you must insert 0CALDAY in report and then use Offsets or implement code in CMOD.
    Thanks
    Reddy

  • How to restore Project from repository for specific date ?

    Hello,
    I have Web Dyn Pro Project. Some files were deleted in project and were checked in to repository.
    Could you please describe easy steps how to restore project state for specific date ?

    The only way you could do that was if you used Time Machine on the computer to make backups. You could simply store the mobile backups folder on the day you wanted and then restore the iPhone.
    I've done this successfully in the past.

  • How to put condition for one date range should not interfear with another ?

    hi friends,
    how to put condition for one date range should not interfear with another  date range.
    my data base table has two fields
    from date
    to date.
    when we enter the date range in the data base , new date range means from date and to date should not interfear.
    can  anybody help me.
    thanks &Regards,
    Revanth
    Edited by: rk.kolisetty on Jul 1, 2010 7:18 PM

    Do it the SAP way....
    First entry...from is today, to is 99991231.
    New dates entered, now we have two rows...:
        from is original date  to becomes yesterday.
        From is today          to is 99991231

Maybe you are looking for

  • I can't cut and paste on my MacBook Pro, I can't cut and paste on my MacBook Pro

    For some reason, I can no longer cut and paste anything on my MacBook Pro.  Does anyone have any suggestions?

  • Authorisation control for master data creation on the basis of eq. category

    Hi Experts, In one of my business scenerio , I want to control the authorisation of a particular person on the basis of equipment category. I want to create a role for that particular ID and assign that equipment category sothat he can not create the

  • A few cross browser questions

    Hello, I have been searching for results for sometime and decided to come here to ask my question. Now, I know these questions have been asked alot of times but I have no good results. My question: Why does every website I make look Good in IE and ba

  • MDM ABAP API AND BUSINESS WORKFLOWS...

    Hi All, In the following vedio blog, SAP saying SAP buisiness workflows & MDM ABAP API combination for certain scenarios. http://www.sdn.sap.com/irj/scn/shop?rid=/media/uuid/40923f37-3483-2c10-5b87-967a607fa3b2 Anyone implemented this approach?

  • Legacy vocal does not appear in Garage Band 10.0.2

    As a legacy user of Garage Band '11, I saved my favorite vocal settings as an instrument under 'Vocals'. However, this 'instrument' doesn't show up in the Legacy section of Garage Band 10.0.2.   Any idea why that might be?