Issue with drill down to FAGLB03

We have report painter reports that were linked to FS10n (Balance display) on the report interface (in the report library - GR22) so that when we drill-down on a line item in the report, it will show all the detail postings for that line item from FS10N.
We recently created a new client by copying our current system and applying a patch. We are on ECC 5.0, and the new patch level is 17.   When testing this new client, we found that FS10N no longer works.   We did activate the new GL but we did not completely turn on all the functionalities. THis is the same as in our other clients (QAS, PRD) and FS10N works perfectly there (QAS and PRD are on ECC 5.0 patch 10).
In the new client, when we go into FS10N, it gives us a message to use t-code FAGLB03.    We then changed our report painter library to interface to FAGLB03. However, when we drill down from the report, it's still showing FS10n.
In the new GL, is there another way to configure the report interface? I used t-code GR22.
Thank you,
Lanny

Hi Sunil,
Thanks for the reply. And yes, the message regarding FAGLB03 is informational only so this is fine if I were to go to FS10N directly to look up a specific account balance. But when I drill down from my report, I only get to the selection screen of FAGLB03/FS10N and the account number showing on that selection screen is not the account number on which I drill down on from the report.
In our PRD or QAS client, when I drill down from a line item in the report, it immediately takes me to the line item display where it listed all the documents posted to that specific account, so I did not have to reinput the account number and re-execute FS10N.
I tried assigning FBL3N in the report interface, but that did not work either. The report drilldown still takes me to the selection screen of FAGLB03.
rgds,
Lanny

Similar Messages

Issue with drill down in Financial Reporting 11.1.2.2

Hi All,
I have a requirement like this :
I have different dimensions for Year and Period(Period has half years and also quarters ).
The requirement is like that when the report opens up the rport should look like this:
                         YearTotal
                    FY12            FY13
Accounts
Now the user wants to drill down on YearTotal and it should show in the following way:
                           H1                      H2
                 FY12      FY13    FY12      FY13
Accounts
and so on.
Still now whatever I have tried I am unable to acheive this . Any ideas whther this is acheivable or not ????
Regards,
Saurav

Even without drill(allow expansion) you can only achieve that only by using merge option.
With merge the drill will not work.
It'll not be a pretty report.
Regards
Celvin
http://www.orahyplabs.com

Exporting a Report to a pdf file with drill down!

Hi,
I would like to export a Report to a pdf file.
My Report includes drill down options. I require the exported pdf with drill down options.
(Similar to Navigation options in a PDF file).
I hope this makes sense.
Please provide a better solution for me.
If am not wrong, this facility is not available with Crystal Reports!!!
Thanks,
Ramesh.

Hi Ramesh
You can download the trial versions of the Crystal Report from the following link:
https://websmp202.sap-ag.de/support (Please copy the link and paste it to your web browser).
You can get the license by putting a request in the follwoing link:
https://websmp202.sap-ag.de/support(Click on Request License key under Service Corner).
Hope it helps.
Regards
Sourashree Ghosh

Calendar with Drill Down Report

Hello,
Everybody.
I am new to Application Express.
Please any one tell me step by step how to make calendar with drill down report.
Waiting for valuable reply.
Thanks
Rahul

Not sure if this is what you wanted, but I have links on a calendar, and when you click them, it branches to another page with details about the event.
To do this, create a calendar region. The SQL statement should have at least 2 columns: The date of the "event", and the text to display as a link. You should also choose a primary key that you want to pass to the drill down report when the user clicks. Something like this:
select hiredate date_scheduled,
          ename display_column,
          empno
   from empIn the calendar attributes of that region, there is a place to designate which column is the date, and which should be displayed. Go down a little further and set the column link. Put the page you want to show the drilldown report on, and set any variables you need to.
Hopefully that helped. Its pretty simple once you play around with it - start simple and then once you get the hang of it, make it more complex.

Problem with drill down in time dimension - OBIEE 11G

Hello There,
I have a problem with drill down in time dimension. The hierarchy for time dimension is " Fiscal Year---> Fiscal Quarter---> Month(Name)--->Date". When I select a Time dimension and click results its getting opened in a Pivot table view. The problem here is, when I click the "Total" its getting drilled down to Year ---> Quarter but when I click on "+ sign next to quarter" it should drill down to month for that particular quarter for that particular year but its drilling down to month for that particular quarter for all years.
Any suggestions are much appreciated.
Thanks,
Harry.

1.) Congrats for resurrecting a year-old thread.
2.) Your answer is here: "Check the level key of the quarter level...it should include both quarter and year columns. Since a specific quarter occurs every year, quarter column alone can't be used as the level key."

Suppressing sub-section with drill down OK

This may be an easy one that I just cannot figure out (I hope...).
I have created two details sections - details A and details B. I would like to suppress details section B while still allowing for drill down capabilities. However, that option is not available. I can either suppress the entire details section (A and B) with drill down capabilities or suppress either A OR B with no drill down capabilities.
Any and all help would be truly appreciated!!

I can only think of using an on demand subreport which sits in Details b. but the row and the SR lable will be visible for all records.
Ian

Problem in Viewer with drill down, Working fine in Plus

Hi,
I am using the cross tab reports with drill down functionality. In the viewer version I am getting the following error:
An error occurred while handling the event. See the application log for more details.
- The numerical value entered was too low.
This one working fine in Plus. .
As for your information this one is working fine in both plus and viewer in development instance and not working in PROD instance.
Please help me out.
thanks.

Update
Hi Guys the report is working fine with cross tab . Its giving the above error when ever I click the Drill to link which takes to the another detail report.
thanks in advance

OBIEE-- Google Maps With Drill Down Facility

Hi All,
I want to create a map chart ie., google maps in OBIEE with drill down facility.
This is my Hierarchy -> From country to state to city .
I have this data in my table in the database as columns.
I know to create google map but dont know how to include hierarchy, please let me know if this can be done.
Thanks in Advance

Firstly:
http://catb.org/~esr/faqs/smart-questions.html#before
Then look at:
http://obiee101.blogspot.com/2009/03/obiee-google-maps-multiple-addresses.html
http://www.artofbi.com/index.php/2009/07/obiee-and-google-maps-integration/

Required funnel with drill down

Experts,
Any sample example of Funnel Chart with drill down option available in Jdev 11.x ?
thnks.

Hi user 552235...
I am not sure if my next post will help you, since I am not working with portal, but I had a problem with drill to link in the same disco version (10.1.2.48.18) and the problem solved after applying patch 5507746 for bug 5475467.
You can read more in metalink with the number I supplied you and try in a test environment of course...
Hope this will help you solving your problem, if it does please update the thread for the rest of our community...
Gidi Halamish

HT4623 Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7??

Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7?? Installed ios7 this morning. Tried to use one of my photos from camera roll as background for lock screen and I can't scale the photo to fit the screen. Never had a problem before and now when I pinch the photo to get it to the right size of the screen, it won't stay that way. The photo is enlarged way beyond the screen size so it doesn't look right. Does anyone know how to fix this?

Hello, cliffiapp4.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing this issue.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

Viewing reports with Drill Down option

Hi all, here is the complaint that we received:
Please try to find a means to help!
When I’m in my Report and when in an account and I go to a deal to alter or look at it, when I return to reports I always am driven back to the top of the report file. If I’m in December and looking at the entire year I have to go through all accounts once again to get to the same starting point. A great irritant. I can’t help but think that there is a better way.
Anyone know if this can be changed? Thank you in advance!!!

Sorry, let me explain...
The problem isn't with the report, they have issues with what happens after you drill down into the account from the report and go back to the report.
When they go back to the report after adjusting the account/opp it doesn;t go back to what they were looking at, the view will go to the top of the report. Say they were looking at Account #100 out of 250 (250 total accounts in the report), if they drill down into account 100 and then go back to the report they will be taken back to account #1.
Is that more clear?
What they want is to be able to go back to the view of Account #100.

HGrid with drill down & chart

Hello folks, I've a requirement, kinda hard and I would like to know some guide lines with my first OAF customzied page.
The requirement is a page that includes the Organization Hierarchy from the top most to the to bottom including managers and with a drill down option for each department and manager. Another thing is a report issue, which is a competency/appraisal chart grouped for a specific department/supervisor or the whole organization.
At first, I thought of a graphTable bean under the HGrid that will be implemented with PPR option to refresh each time a selection happens in the HGrid. Then I've found a way to include BI Publisher reports withing an OAF Page in real-time. I almost have gathered the information to be used but the main problem is, I don't know from where to start!.
Please advise.

glad to hear we were on the right track. chapter 12 of the htmldb documentation provides info on some of the api's that htmldb makes available to you for use in your application. of those api's, htmldb_util, has a url_encode function. it encodes special characters and such into hex so you can call them via a url. because of the weirdness you described it seemed as if you could use some encoding your svg chart links, too. so instead of coding your select statement as...
select 'f?p='|| :APP_ID ||':2:'|| :APP_SESSION ||'::::P600_SHOW:'||remarks link, remarks label , count(remarks) value from whatever
...i was suggesting you write it as...
select 'f?p='|| :APP_ID ||':2:'|| :APP_SESSION ||'::::P600_SHOW:'||htmldb_util.url_encode(remarks) link, remarks label , count(remarks) value from whatever
...hope this helps,
raj

Having Trouble with Drill Down Report

Hello,
I am having issues with getting Carl's example to work. http://htmldb.oracle.com/pls/otn/f?p=11933:13
This is my main query:
SELECT
AD_SPRIDEN_ID,
AD_FIRST_NAME_PREF,
AD_LAST_NAME_PREF,
AD_SPOUSE_BANNER_ID,
AD_SPS_PREF_FIRST_NAME,
AD_SPS_PREF_LAST_NAME,
AD_ATHL_MATCH_GIFTS_CFY,
AD_CURES_MATCH_GIFTS_CFY,
AD_UNRES_MATCH_GIFTS_CFY,
AD_ENDOW_MATCH_GIFTS_CFY,
AD_FACIL_MATCH_GIFTS_CFY,
AD_SPS_ATHL_MATCH_GIFTS_CFY,
AD_SPS_CURES_MATCH_GIFTS_CFY,
AD_SPS_UNRES_MATCH_GIFTS_CFY,
AD_SPS_ENDOW_MATCH_GIFTS_CFY,
AD_SPS_FACIL_MATCH_GIFTS_CFY,
FROM MATCHING_GIFTSI want to drill down on past fiscal year data:
SELECT
AD_SPRIDEN_ID,
AD_FIRST_NAME_PREF,
AD_LAST_NAME_PREF,
AD_SPOUSE_BANNER_ID,
AD_SPS_PREF_FIRST_NAME,
AD_SPS_PREF_LAST_NAME,
AD_ATHL_MATCH_GIFTS_CFY_1,
AD_CURES_MATCH_GIFTS_CFY_1,
AD_UNRES_MATCH_GIFTS_CFY_1,
AD_ENDOW_MATCH_GIFTS_CFY_1,
AD_FACIL_MATCH_GIFTS_CFY_1,
AD_ATHL_MATCH_GIFTS_CFY_2,
AD_CURES_MATCH_GIFTS_CFY_2,
AD_UNRES_MATCH_GIFTS_CFY_2,
AD_ENDOW_MATCH_GIFTS_CFY_2,
AD_FACIL_MATCH_GIFTS_CFY_2,
AD_ATHL_MATCH_GIFTS_CFY_3,
AD_CURES_MATCH_GIFTS_CFY_3,
AD_UNRES_MATCH_GIFTS_CFY_3,
AD_ENDOW_MATCH_GIFTS_CFY_3,
AD_FACIL_MATCH_GIFTS_CFY_3,
AD_ATHL_MATCH_GIFTS_CFY_4,
AD_CURES_MATCH_GIFTS_CFY_4,
AD_UNRES_MATCH_GIFTS_CFY_4,
AD_ENDOW_MATCH_GIFTS_CFY_4,
AD_FACIL_MATCH_GIFTS_CFY_4,
AD_SPS_ATHL_MATCH_GIFTS_CFY_1,
AD_SPS_CURES_MATCH_GIFTS_CFY_1,
AD_SPS_UNRES_MATCH_GIFTS_CFY_1,
AD_SPS_ENDOW_MATCH_GIFTS_CFY_1,
AD_SPS_FACIL_MATCH_GIFTS_CFY_1,
AD_SPS_ATHL_MATCH_GIFTS_CFY_2,
AD_SPS_CURES_MATCH_GIFTS_CFY_2,
AD_SPS_UNRES_MATCH_GIFTS_CFY_2,
AD_SPS_ENDOW_MATCH_GIFTS_CFY_2,
AD_SPS_FACIL_MATCH_GIFTS_CFY_2,
AD_SPS_ATHL_MATCH_GIFTS_CFY_3,
AD_SPS_CURES_MATCH_GIFTS_CFY_3,
AD_SPS_UNRES_MATCH_GIFTS_CFY_3,
AD_SPS_ENDOW_MATCH_GIFTS_CFY_3,
AD_SPS_FACIL_MATCH_GIFTS_CFY_3,
AD_SPS_ATHL_MATCH_GIFTS_CFY_4,
AD_SPS_CURES_MATCH_GIFTS_CFY_4,
AD_SPS_UNRES_MATCH_GIFTS_CFY_4,
AD_SPS_ENDOW_MATCH_GIFTS_CFY_4,
AD_SPS_FACIL_MATCH_GIFTS_CFY_4
FROM MATCHING_GIFTSExample if the user clicks on AD_ATHL_MATCH_GIFTS_CFY in the first query, I want the following fields to display (note that these are colums. I would want the actual value of the columns to display):
AD_ATHL_MATCH_GIFTS_CFY_1
AD_ATHL_MATCH_GIFTS_CFY_2
AD_ATHL_MATCH_GIFTS_CFY_3
AD_ATHL_MATCH_GIFTS_CFY_4
or if the user selected AD_SPS_CURES_MATCH_GIFTS_CFY, I want the following to display:
AD_SPS_CURES_MATCH_GIFTS_CFY_1
AD_SPS_CURES_MATCH_GIFTS_CFY_2
AD_SPS_CURES_MATCH_GIFTS_CFY_3
AD_SPS_CURES_MATCH_GIFTS_CFY_4
Any help is appreciated,
Kelly

Hi Kelly,
OK - this is what I've done:
1 - Created two application items through Shared Components:
G_CITY_ID
G_DEPTNO
these will be used to pass CITY_ID and DEPTNO values from the page to application processes using Ajax
2 - Created two application processes through Shared Components, with the following settings:
Process Point: On Demand: Run this application process when requested by a page process
Name: GET_DEPARTMENTS
Type: PL/SQL Anonymous Block
Process Text:
BEGIN
HTP.P('<table class="t17Standard" cellspacing="0" cellpadding="0" border="0" summary="">');
HTP.P('<TR>');
HTP.P('<TH class="t17ReportHeader">DEPTNO</TH>');
HTP.P('<TH class="t17ReportHeader">DNAME</TH>');
HTP.P('</TR>');
FOR x IN (SELECT DEPTNO, DNAME FROM DEPT WHERE CITY_ID = :G_CITY_ID ORDER BY DNAME)
LOOP
HTP.P('<TR>');
HTP.P('<TD class="t17data">' || x.DEPTNO || '</TD>');
HTP.P('<TD class="t17data">' || x.DNAME || '</TD>');
HTP.P('</TR>');
END LOOP;
HTP.P('</table>');
END;This will return a list of departments for a selected CITY_ID value in the report
Process Point: On Demand: Run this application process when requested by a page process
Name: GET_EMPLOYEES
Type: PL/SQL Anonymous Block
Process Text:
BEGIN
HTP.P('<table class="t17Standard" cellspacing="0" cellpadding="0" border="0" summary="">');
HTP.P('<TR>');
HTP.P('<TH class="t17ReportHeader">EMPNO</TH>');
HTP.P('<TH class="t17ReportHeader">ENAME</TH>');
HTP.P('<TH class="t17ReportHeader">SAL</TH>');
HTP.P('<TH class="t17ReportHeader">COMM</TH>');
HTP.P('</TR>');
FOR x IN (SELECT EMPNO, ENAME, TO_CHAR(NVL(SAL,0)) SAL, TO_CHAR(NVL(COMM,0)) COMM FROM EMP WHERE DEPTNO = :G_DEPTNO ORDER BY UPPER(ENAME))
LOOP
HTP.P('<TR>');
HTP.P('<TD class="t17data">' || x.EMPNO || '</TD>');
HTP.P('<TD class="t17data">' || x.ENAME || '</TD>');
HTP.P('<TD class="t17data">' || x.SAL || '</TD>');
HTP.P('<TD class="t17data">' || x.COMM || '</TD>');
HTP.P('</TR>');
END LOOP;
HTP.P('</table>');
END;This will return a list of employees for a selected DEPTNO value in the report
3 - On the report page's HTML Header setting, I have entered:
<script type="text/javascript">
function getEmployees(deptno)
var d = document.getElementById("DEPTNO_" + deptno);
if (d.style.display == "none")
    var g = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=GET_EMPLOYEES',0);
    g.add('G_DEPTNO',deptno);
    var gRet = g.get();
    d.innerHTML = gRet;
    d.innerHTML += "";
    d.style.display = "block";
else
    d.style.display = "none";
function getDepartments(city)
var d = document.getElementById("CITY_ID_" + city);
if (d.style.display == "none")
    var g = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=GET_DEPARTMENTS',0);
    g.add('G_CITY_ID',city);
    var gRet = g.get();
    d.innerHTML = gRet;
    d.innerHTML += "";
    d.style.display = "block";
else
    d.style.display = "none";
</script>These are two javascript functions that will be called when an item is clicked in the report.
Each runs an Ajax call to the appropriate application process, passes the selected DEPTNO or CITY_ID value into the application items, runs the process, retrieves the results and then inserts that into a DIV next to the item in the report and makes that visible. Clicking the link again just hides the DIV
4 - In the report definition, on the DEPTNO column definition, I have set the following HTML Expression:
<a href="#" onclick="getEmployees('#DEPTNO#');">#DEPTNO#</a><div id="DEPTNO_#DEPTNO#" style="display:none"></div>This creates the DEPTNO as a link and clicking the link runs the getEmployees javascript. Next to the link is a DIV tag with a unique ID (created using #DEPTNO# - which is replaced by the actual DEPTNO value on the row)
5 - I have done a similar thing on the CITY_ID setting:
<a href="#" onclick="getDepartments('#CITY_ID#');">#CITY_ID#</a><div id="CITY_ID_#CITY_ID#" style="display:none"></div>And, that should be it - the user clicks the "link", the javascript is called, the clicked value is passed into an application item, which, in turn, filters the required data. This data is formatted into a table and passed back to the page. The javascript then receives this and inserts it into the DIV next to the link and displays it.
I think the CITY_ID column is one that I added to the standard DEPT table, so you may not have that one, but hopefully you get the idea from the above
Also note that I have used the Theme 17 Standard report template - you will need to adjust the class names in the application processes if you are using a different theme/template
I hope that all makes sense!
Andy

Input-Readiness of Query with drill down

Hello experts,
I've got an issue with the input readiness of a query.
In the Query I use the characterisitc "Plan" as a drill-down-characterisitc.
So I don't filter the query for the characterisitc 'plan' but I use it as drill-down-characterisitc, that ervery row is assigned to one 'plan'.
My problem is that the query is not input-ready.
Every other selection is correct. If I change my filter and filter the query for just one "Plan"-> everything works fine and the query is input ready.
When I filter for more than one "Plan" the query is not input-ready, even the characteristic "Plan" is used as drill down charactersitic in the query rows.
Furthermore:
In the characterisitc-relationships of the cube, the characterisitc "Plan" is used as source characteristic for relationships with derivation.
I tried to deactivate all characteristic-relationships. Same problem:
- Input ready if I filter for just one plan
- Not input ready if I filter for more than one plan and use the plan for drill-down
It is not:
- a data slice problem
- not a problem of the unique selection in any other characterisitcs
- data load behaviour of the cube
- chnge mode settings in query
If you have any idea, please let me know
Thanks
Johannes

Hallo Herr Hilscher,
Not input ready if I filter for more than one plan and use the plan for drill-down
Kannst du noch mal erklären?
Danke.
With regards,
Anand Kumar

Issue to drill down from a report

Hi,
Our requirement is we need to show three different graphs in a single report representing different data, from that we need to drill down to a new different report ;
Two approaches we tried with crystal report are;
1. We put three graphs and the table in the single report and tried to implement drill down for each graph. We could group data on the basis of first pie chart data and could drill down. But while we tried to group data for second bar chart grouping is happening only as a sub group of first group. Ie, we cannot group data independently for different charts.
2. In the second approach we created different 3 sub reports and added in to a main report. But Crystal report is not supporting sub report to a sub report. Ie, we cannot go to drill down report.
It would be a great help, if you could suggest some solution.
Thanks,
Jomy

Hi,
As per my understanding, you have one report say Parent1 (SA1) and one Report say Child1 (SA2), now you want to pass some values from parent1 to child1.
1> Create 1 interim report from parent1.
2> In your Child report in filter part use result based on another analysis.
Please let me know if it resolves yourissues.
Thanks
Anirban

Issue with drill down to FAGLB03

Similar Messages

Maybe you are looking for