Issue with Epson RX500 - scanning

So I tried scanning some stuff today using image capture on and it worked great the first two times. After that it would scan but then not show anything in image capture and the program would freeze up. It wouldn't lock the program but you couldn't scan anything or do anything in image capture till you restarted the computer.
I got the latest Epson scan utility from Epson's site like they suggest but it wouldn't open. closes automatically after I try to open it. In the console I get this message: 11/24/07 10:33:27 AM [0x0-0x26026].com.epson.scan.standalone[285] dyld: shared cached file is corrupt: /var/db/dyld/dyldshared_cacheppc
Deleted file and tried again but nothing. Any ideas? It sometimes works if I reboot then get one scan and reboot again other times it doesn't work, although the scanner goes it doesn't pass the data to the screen it seems like.

Well I got it working only if I scan to tiff. I can't scan directly to pdf. Not sure why but at least I can get a tiff then convert it.

Similar Messages

Scanning with Epson RX500 and trying Image Capture

I have an Epson RX500.It prints and copies fine. It was scanning fine, using Photoshop Elements,for two years but now it is not recognized (I think this has something to do with updated Tiger 10.4.8. I've tried to reinstall the TWAIN and scanning software but that was useless. I've tried to use Image Capture but get the message when the Scan Setup opens up that "The scanner EPSON Stylus Photo RX500 is in use by another application..."
Can anyone help?

Eric,
There are one, or more files (plist, I think), that need to be purged, so that new copies can be made. I don't have those listed anywhere, that I can remember, but if you call Epson, a tech should be able to lead you through them. I only had this problem when I upgraded to 10.4, from 10.3, so memory is hazy.
Ernie

Margin issues with Epson R2400

I user LR 3 on a Mac, and print on an Epson R2400.
My problem is that my print outs are off-centered, even though everything is all right on the screen (and the margins I define on LR are even).
This probably has something to do with Epson's driver (v 6.57), but I do not know what to do.
Thanks for your help.

You need the 6.5dAs drivers from http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=54861&infoType=Downloads
The copies issue is a known problem. Sorry about that. But the other problems are not things we saw when testing with those drivers.

Airport Express do not print with Epson RX500

I just bough a Airport express for our office. Everything works fine except that I have tried to print with our Epson RX500 printer and it doesn't seem to work. We have to Powerbook on 10.4.3 and although the computer seems to see the printer, we can't print? Could someone help us? Thakns

I am not familiar with this particular Epson model (I use an Epson CX4600) but I would suggest installing the printer directly to the Powerbook and make sure it prints there first. Check the Epson site for any updated drivers.
Once the printer is working hooked directly to the Powerbook, do an additional install (as a Bonjour printer).
That process has worked for me in the past.
David

Counter issues with 2D raster scan and count acquisition

I am building a confocal laser scanning microscope and am currently attempting to develop labview controls for it. I have a fast steering mirror (FSM) which takes analog voltage inputs to control it's x and y angle and I have an avalanche photo diode (APD) which sends a TTL pulse for each photon detection event. For now, I am trying to create a program which will send out two analog signals to create a 2d raster scan with the FSM and count the number of pulses from the APD per pixel. I have been trying to make the program from https://decibel.ni.com/content/docs/DOC-5779 work, but I keep running into counter issues. I am using a generated pulse train from the other counter on my device (NI 6011E) as the period.term input, but I get a "Two consecutive input signals occurred without a counter timebase edge" error if I increase the frequency of the pulse train too high. Unfortunately, the number of pixels I can acquire seems to be limited to twice the frequency of the counter, so I cannot just use a lower frequency train. I believe that the error is occurring because the count rate from the APD is very low and that there are simply no photons hitting the detector in the time period between pulses.This is not a problem, but I would like to know how to simply record a 0 and continue with the scan, rather than have the entire program exit with an error.
Alternatively, if this does not seem like the correct way to accomplish what I am trying to do, I am open to new directions.

So simply ignoring the error did not work, because the DAQmx subroutine stops collection when the error is detected. I think I may need to come up with a different approach to synchronize the counting of TTL pulses with an analog output. Attached below is the code I have been working with.
Attachments:
Raster_2DOutput_wCounter_82.vi ‏45 KB

Epson Perfection 2400 Scanner issue with Epson Print Driver 2.4.1 Update

After the Epson Print Driver 2.4.1 update, my scanner quit working with Image
Capture, which hangs during the overview scan. The scanner makes a pass over
the document, but Image Capture just sits for a while saying "Overview Scan..."
and then fails with a generic error message.
I tried the suggestion in [11993273|http://discussions.apple.com/thread.jspa?messageID=11993273&#11993273 ], but that did not work for me.
Any other ideas?

Thank's for the suggestion, but no help.
It is not straight-forward to uninstall the driver because Apple installer
does not offer an uninstall option. I resorted to
sudo find /Library -iname "epson" -print -exec mv {} ~/Desktop/epson \;
in the terminal. Reboot. Ran EPSONPrinterDrivers.pkg. Ran Disk Utility's
Repair Permissions. Reboot. Added scanner back in the System Preferences.
Opened Image Capture, the overview scan started and a few minutes later
*Scanner reported and error*
An error occured during scanning.

CS5 printer issues with Epson R2400

Upgraded (????) to CS5
Win7-64, Photoshop CS5 - 64 & 32, Epson R2400 (Epson Easy Photo Print v1.51 Drivers)
CS5 will not print multiple copies. Can change it in printer settings, makes no difference.
CS5 will not allow me to change orientation to landscape. Have to go to printer settings. Will not stick. have to change it everytime I want to print the same file.
CS5 will lose the printer. Have to change the printer then change it back. "because the printer does not exist" is the error message. (Not even a complete sentence!)
Printer profile will not stick.
These issues did not occur with CS4.

You need the 6.5dAs drivers from http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=54861&infoType=Downloads
The copies issue is a known problem. Sorry about that. But the other problems are not things we saw when testing with those drivers.

Printer issue with epson WF 2540

All of a sudden, I'm unable to see print when printing an Adobe PDF or a TextEdit file. I AM able to print from a screen grab.
Yosemite 10.10.3
Apple says it's because Epson has not upgraded a driver for Yosemite. Epson says it's Apple's fault. Or mine since the screen grab software does print. One PDF just printed lines and volumes, no data.
Thanks

Having the same problem with my Epson WF2540. I reset the printer and now it is unable to find it. Says device is not connected. The wifi is working on it but for some reason it can not seem to add the printer.
Really hoping there is a fix for this soon!

Need help with Photoshop CS5.5 Printing issues with Epson R2880

Hi,
I'm experiencing problems printing on photoshop, I already selected center image but the epson printer always print to the upper left hand corner of
the page. And the image is always cropped in a weird way, so eveytime I print the image is not a whole. I made sure I selected the right paper size too.
It used to print okay, this happened a while ago but I don't know how it got fixed evetually, I think was after a complete restore of my OS.
I am sure its nothing to do with the Epson driver, becuas after I export the file from photoshop to PDF it prints fine with either preview or adove acrobat.
Has anyone else experienced such problem?
Thank you!
Shao

Nope, not using the presets, i still cant figure out why it suddenly cant print right!
btw, thnks for the link, its very useful!!

Issues with epson 2880

Hi everyone -
I'm using Photoshop Elements on a mac and I'm having trouble printing to my Epson 2880. It's forcing me to print from the back-end feeder, which may be correct for Enhanced Matte Paper. But in doing so the alignment of the page is off (less space on one side than the other) and the image does not begin to print on the page for a good two inches, pushing the rest of the image off the bottom of the page. I think this might all be fixed if I could figure out how to change the page setup in printer settings from "roll paper". It does not give me the opportunity to do this. Any ideas???
Thanks,
Amy

you do have the option under page setup where you can set your margins accordingly.

Reg: Continuous Printing issue in EPSON LQ-300+II

Dear All,
I'm facing a continuous cheque printing issue with EPSON printer (LQ-300+II).
We've created a new page format for state bank of Mysore cheque (Dimension 231mm width X 92.5mm Height) and assigned that in our sapscript for printing. The cheque is printed using transactoin F-58.
In windows server properties (print setting), our system admin has created a form with above dimension.
My problem, first & second cheques are printed correctly & identically, but from third cheque the amount is printed slowly starting to print up by 0.5mm. After few cheques it is completing coming out of the box and printing few cms up.
We've tried implementing every possible solutions given in the forum and ended in vain.
1) inserted coding in printer initialization.
2) tried to create similiar page format in windows.
Please sugget a way to get out of this continuous printing issue.
Thanks,
Rajan U

The stated length of the form / paper is in error... that's why the output is "moving" up the page... sound like it should have been 93.0 mm height. I would guess that if you carefully measured the placement on check 1 and 2, you would see precisely how much too short the height is....

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

ImageFORMULA P-215 Scan-tini Software Issues with Windows 8.1 32-Bit Laptop

Hi,,
I have a ImageFORMULA P-215 Scan-tini scanner which worked without any problems with my Lenovo X230 laptop running Windows 7 64-bit. However, I have been unable to get the CaptureOn Touch software to work on my Asus Transformer TA100T notebook running Windows 8.1 32-bit. The software and driver installation completed without any errors (without the scanner connected). But when I connect the scanner into the USB port and run the Capture On Touch software, it always comes up with a Microsoft Visual C++ runtime library error - Program C:\Program Files\Canon Electronics\P215\TouchDR.exe abnormal program termination.
I tried every possible troubleshooting approaches I could Google online including (1) doing running sfc /scannow (which found no integrity or corruption issues with my Win 8.1 system, (2) did a clean reboot disabling everything except the CaptureOn Touch software and it still comes up with the same error, (3) installing Visual C++ runtime library distributables for 2005, 2008, 2010, 2012, 2013 but still the error pops up. So basically, now I can't use this great little portable scanner with my great little transformer tablet/notebook.
I am wondering whether anyone else have come across a similar problem of getting this scanner to work on a 32-bit Win 8.1 system? Would greatly appreciate any advise.

Hi:
I would try the Vista audio driver from your notebook's support and driver page.
the dv6000 model series is not supported by HP for W7 let alone W8 or 8.1.

My wife has issues with her AOL email and was told to contact Apple about a virus scan. Has anyone else had a similar issue?

My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?

You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
http://www.f-secure.com/weblog/archives/00002300.html
(I have ClamXav set to scan incoming emails, but nothing else.)

Scanning Issue with Maverick and Office Jet Pro 8600

Just wanted to add my voice to the numerous problem reports. Specifically:
1) I could scan just fine until I upgraded to Maverick (Mac OS 10.9)
2) to address the problem, I downloaded the latest HP drivers for 10.9-didn't help
3) Tried to use the separate HP Scan application-no luck; couldn't fine the computer (even though I have been printing regularly)
4) Based on the HP problem solution posting (which seems a bit out of date), tried to uninstall the software and reinstall; the uninstall would not complete, although it did delete all of my printers.
It appears that it is finally time to abandon HP for printers, if they can't keep up with Apple's releases.

Hi amaltz,
I understand you are having an issue with the scan software working with Mavericks. I can't help you with this. My suggestion is to completely remove all HP software from the computer and reinstall. Follow the instructions below to resolve the issue.
Scrub
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
Hold down Control, Option and Command
While holding the three buttons down, Click uninstall.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions (I know many of you have done this but because we have now done a scrub it is good measure to ensure non of your permissions differ)
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the computer.
Now you will have a fresh start and be able to reinstall the software. Please let me know if this resolves the issue you are experiencing. If it does not, I will gladly follow up.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Issue with Epson RX500 - scanning

Similar Messages

Maybe you are looking for