Issue with Export / Import Configuration Data in AC 5.3 migration to AC 10
Hi,
We are migrating from AC 5.3 to AC 10. As per the Migration Guide I have exported the data from AC 5.3.
The export created around 57 files on the destination with .dat extension.
Moved these files to target server Import location.
Then I have used the utility (GRAC_DATA_MIGRATION) in AC 10. Selected the Import location. and clicked Get Files.
It has uploaded some files (21 out of 57).
When I analyzed the uploaded files, I found it has uploaded only "Common Configuration" data. For the below Objects, though the export utility has created files, Import utility did not uploaded the files.
1. Business Unit
2. Critical Roles and Profiles
3. CUP Role Repository
4. Mitigation Controls
5. SOD Rules
6. Workflow
Does anyone have any idea about this issue?
Regards,
Deepak
Deepak,
Can you share with me how you are importing the config data? How you are using the path? Please share this and also try toshare how you systems are distributed.
Regards,
Faisal
Similar Messages
-
Issues with Export/Import using Database & Shared buffer
Hi All,
I have a method that calls a program via a job and I am having issues passing data between the two.
Note that two different users process the method and program (via job) resp. This is how I am calling the second prog-
SUBMIT ZPROGRAM
VIA JOB l_jobname
NUMBER l_jobcount
USER i_user
AND RETURN.
I need to pass data from method to the second program and vice versa and then the method continues its processing with the data acquired from the second program.
I have tried using Import/Export using database and also shared buffer. What I have found is that most of the times I am able to pass data from method to program. However the job takes a couple of min to execute and I think that the data is not making back to the method in time.
I have looked at some useful forum links-
Problem with export/import in back ground
Re: EXPORT/IMPORT to MEMORY
but havent been able to find an answer yet. Any solution? Thanks in advance for your help!
LizHi Suhas, Subhankar
I have tested the scenario without the job previously itself and it works. Thats the reason, i am trying with the job now as my requirement is that I need to change the user while executing the second report.
Here is an example of my import/export - I am passing the return value from the second report to the first.
Code in second report-
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'RET1'.
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
EXPORT RETURN1 TO SHARED BUFFER INDX(ST) ID INDXKEY.
Code in first report -
SUBMIT ZPROGRAM
VIA JOB l_jobname
NUMBER l_jobcount
USER i_user
AND RETURN.
Once Job close FM is executed successfully, I import the values as follows
IMPORT RETURN1 TO RETURN1 FROM SHARED BUFFER INDX(ST) ID INDXKEY3.
INDXKEY is having value RET1.
However Return1 is not having any values in first report. It has some value in executed without the job
Please note that I have tried Export/import with Database too and I am getting the same results.
Thanks for your suggestions.
Regards, Liz -
Export/Import configuration data/ other details in CUP, SPM and ERM
Hi experts
How we can export the connectors, Workflows, initiators, stage , approvers , configurations from CUP, ERM, SPM Development to their production system ?. We have option to export configuration data and connecters option in RAR but option is not seen in CUP, ERM or SPM . Is there a way? I am on AC 5.3 SP5. Is it planned for any future SP release ?
Thank you.Hi Sahad,
- in SPM, there is no configuration but the connectors. You can just create those in one place (no point in even doing it in a test system)
- in ERM, there's also little value of testing. You might as well only configure one system and keep the audit information consistent.
- CUP has an export configuration option. Unfortunately you always have to export a whole tree, whereas you might probably only want to export a few items of a workflow configuration (most likely the stages). Almost all of the other configuration (approvers, connectors etc. is either trivial or different in the production system anyway (you usually work with test users in DEV, at least that's my experience).
Frank. -
Hello Folks,
I am facing an issue with Contract Import. The contract import file has been struck in Contract Document importer and from past 4 days the status is showing as Running. Even in trace file, it is showing as "Mon Mar 16 18:05:51 CET 2015 Error during action"
Is there any way where the import can be stopped or deleted?
Any help is highly appreciated!!!
Thanks in Advance!
Regards,
VigneshThanks John and Peter for your support. Unfortunately I cannot provide a screenshot of the issue since of the confidential material and has to re-do the work. I have re-done all the excel correction and re-created the Indesign merge document on a PC laptop. So far 'no' problems. I have a strong suspicion that the cause has been a macro used in excel to convert text or another one that I used to add values to the colum that InDesign found issue. Definetly InDesign should have reported a problem before merging the data. Yes, I am using CS5.5 with the latest update and Excel 2010 on a Mac. Still, I would like to find out what means the letter 'A' in the Data Merge Panel, since this may have directed me to find why the multiple 'AAA...' shown in the first line in the merge panel. Again thanks John and Peter: much appreciated.
-
Issue with export in Excel in WAD
Hi
I have an issue with export to excel in WAD. I have a web template with two or more tabs.
On the webtemplate I have two buttons to export to excel. One to export the content from the active tab and one button to export content in all tabs.
My problem is that when I export to excel it always add the current/active content twice. I've tried with both buttons and they work as expected except that they export one table to much (the active).
can anyone help / give a clue what to look for.
br,
John
Edited by: John Dolph on Apr 15, 2010 10:50 AMHi
Sorry I has been a while but the problem still occurs,
I've defined my export button group like this in a seperate template and I expected that it would only return the resultset from TAB_A and TAB_B but it also export the resultset from the tab I'm currently on.
<bi:TEMPLATE_PARAMETERS name="TEMPLATE_PARAMETERS" />
<bi:BUTTON_GROUP_ITEM name="TAB_BUTTONs" designheight="23" designwidth="300" >
<bi:BUTTON_LIST type="ORDEREDLIST" >
<bi:BUTTON type="COMPOSITE" index="2" >
<bi:CAPTION value="EXCEL" />
<bi:TOOLTIP value="Table, Graph and/or Table/Graph download to PDF" />
<bi:ACTION type="CHOICE" value="INSTRUCTION" >
<bi:INSTRUCTION >
<bi:EXPORT >
<bi:ITEM_REF_LIST type="UNORDEREDLIST" >
<bi:ITEM_REF index="1" value="TAB_A_ANALYSIS" />
<bi:ITEM_REF index="2" value="TAB_A_CHART" />
<bi:ITEM_REF index="3" value="TAB_B_ANALYSIS" />
<bi:ITEM_REF index="4" value="TAB_B_CHART" />
</bi:ITEM_REF_LIST>
<bi:EXPORT_FORMAT value="XLS" />
</bi:EXPORT>
</bi:INSTRUCTION>
</bi:ACTION>
</bi:BUTTON> -
Issue with Oracle LONG RAW data type
Hi All,
I am facing some issues with Oracle LONG RAW DATA Type.
We are using Oracle 9IR2 Database.
I got a table having LONG RAW column and I need to transfer the same into another table having LONG RAW column.
When I tried using INSERT INTO SELECT * command (or) CREATE TABLE as select * , it is throwing ORA-00997: illegal use of LONG datatype.
I have gone through some docs and found we should not use LONG RAW using these operations.
So I did some basic PLSQL block given below and I was able to insert most of the records. But records where the LONG RAW file is like 7O kb, the inserting is faliling.
I tried to convert LONG RAW to BLOB and again for the record where the LONG RAW is big in size I am getting (ORA-06502: PL/SQL: numeric or value error) error.
Appreciate if anyone can help me out here.
DECLARE
Y LONG RAW;
BEGIN
FOR REC IN (SELECT * FROM TRU_INT.TERRITORY WHERE TERRITORYSEQ=488480 ORDER BY TERRITORYSEQ ) LOOP
INSERT INTO TRU_CMP.TERRITORY
BUSINESSUNITSEQ, COMPELEMENTLIFETIMEID, COMPONENTIMAGE, DESCRIPTION, ENDPERIOD, GENERATION, NAME, STARTPERIOD, TERRITORYSEQ
VALUES
REC.BUSINESSUNITSEQ, REC.COMPELEMENTLIFETIMEID, REC.COMPONENTIMAGE, REC.DESCRIPTION, REC.ENDPERIOD, REC.GENERATION, REC.NAME,
REC.STARTPERIOD, REC.TERRITORYSEQ
END LOOP;
END;
/Maddy wrote:
Hi All,
I am facing some issues with Oracle LONG RAW DATA Type.
We are using Oracle 9IR2 Database.
I got a table having LONG RAW column and I need to transfer the same into another table having LONG RAW column.
When I tried using INSERT INTO SELECT * command (or) CREATE TABLE as select * , it is throwing ORA-00997: illegal use of LONG datatype.
I have gone through some docs and found we should not use LONG RAW using these operations.
So I did some basic PLSQL block given below and I was able to insert most of the records. But records where the LONG RAW file is like 7O kb, the inserting is faliling.
I tried to convert LONG RAW to BLOB and again for the record where the LONG RAW is big in size I am getting (ORA-06502: PL/SQL: numeric or value error) error.
Appreciate if anyone can help me out here.
DECLARE
Y LONG RAW;
BEGIN
FOR REC IN (SELECT * FROM TRU_INT.TERRITORY WHERE TERRITORYSEQ=488480 ORDER BY TERRITORYSEQ ) LOOP
INSERT INTO TRU_CMP.TERRITORY
BUSINESSUNITSEQ, COMPELEMENTLIFETIMEID, COMPONENTIMAGE, DESCRIPTION, ENDPERIOD, GENERATION, NAME, STARTPERIOD, TERRITORYSEQ
VALUES
REC.BUSINESSUNITSEQ, REC.COMPELEMENTLIFETIMEID, REC.COMPONENTIMAGE, REC.DESCRIPTION, REC.ENDPERIOD, REC.GENERATION, REC.NAME,
REC.STARTPERIOD, REC.TERRITORYSEQ
END LOOP;
END;
/below might work
12:06:23 SQL> help copy
COPY
Copies data from a query to a table in the same or another
database. COPY supports CHAR, DATE, LONG, NUMBER and VARCHAR2.
COPY {FROM database | TO database | FROM database TO database}
{APPEND|CREATE|INSERT|REPLACE} destination_table
[(column, column, column, ...)] USING query
where database has the following syntax:
username[/password]@connect_identifier -
BAPI to update EIKP (Foreign Trade: Export/Import Header Data)
Hello,
Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
Thank you.
Best Regards,
Sreenivas.Hi Sreenivas
Try the FM EXPIMP_POSTING
Pushpraj -
BAPI to update EIKP (Foreign Trade: Export/Import Header Data) data
Hello,
Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
Thank you.
Best Regards,
Sreenivasa Chary Bathoju.Dear Sreeninvas,
You can you BAPI_PO_CHANGE to change EIKP data. and all purchase order related data.
Thank you.
Best Regards,
Sasidhar Reddy Matli. -
Issues with export with upgrade to 3.3
I am experiencing issues with export with 3.3
The image looks great in the Browser after editing. However when I checked the export folder I discovered corrupt files.
I only dicovered it because I tried to email one of the images.
2 out of 200 the blacks had solarized meaning all blacks went to white.
Never had this problem before in any of my Aperture Versions since day one.
The bottom line problem how can trust that the images are ok on export whitout having to look at every single export later.
This is embarissing since I had already delivered a project not knowing there were bad files.
Additionally images do not seem to be as sharp before the upgrade. I am using Nikon 300 and Nikon 7000 with San Disk Cards.
Do I have to do some camera profiling ?Have you checked the Color Profile setting in the export preset you are using?
I found my Color Profile settings switched to different settings after the upgrade.
Try the Generic RGB profile.
Regards
Léonie -
Issues with iMessage when switching data carrier (wifi - cellular)
So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...
Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W. -
Help with exporting forms based data to Excel 2007
I have a user who is attempting to export forms based data to Microsoft Excel 2007 and when he attempts this he receives a message stating that Windows does not recognise this file type (tsv). I am not too familiar with Office 2007 so I am unable to direct this users as to how to correct this issue.
Is someone able to give me the navigation path to help me to assist this user? thanksDid you verify the file type from Windows Explorer?
1) Right click on My Computer > Explore
2) Go to Tools > Folder Options
3) Click on File Types tab
4) Check if TSV file is defined there or not. If it is not there, click on New and add the File Extension -
Issue with exporting Financial Report in Smartview 11.1.2.2
If I export a FR in "Export in query Mode" , it concatenates the parent with the child (parent.child) and does not return anything in Smartview. Even though the report works fine in workspace.
I narrowed down the issue and it seems if I use Stored member roll up instead of using Shared member roll up it returns the right data when I export the report in Smartview.
So the issue is only with the FR using Shared members.
Does anyone know if this is a known issue or can replicate this in their environment ? We are on version 11.1.2.2
ThanksNope that didn't work, but I figured out the error. I was running the command on a client machine. When I run the command on the server itself, it works fine.. well, now I have issues with my POVs, but at least it's finding my .csc file.
Thanks for your help John. -
Problem with EXPORT IMPORT PROCESS in ApEx 3.1
Hi all:
I'm having a problem with the EXPORT IMPORT PROCESS in ApEx 3.1
When I export an application, and try to import it again. I get this error message
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 16, column 28: PLS-00103: Encountered the symbol &quot;牃慥整㈰㈯⼴〲㐰〠㨷㐵㈺′䵐&quot; when expecting one of the following: ( - + case mod new not null &lt;an identifier&gt; &lt;a double-quoted delimited-identifier&gt; &lt;a bind variable&gt; avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp in
As a workaround, I check the exported file and found this
wwv_flow_api.create_flow
p_documentation_banner=> '牃慥整⠤㈰㈯⼴〲㠰〠㨷㠵㈺′äµ
And when I replace with this
p_documentation_banner=> ' ',
I can import the application without the error.
somebody knows why I have to do this??
Thank you all.
Nicolas.Hi,
This issue seems to have been around for a while:
Re: Error importing file
I've had similar issues and made manual changes to the file to get it to install correctly. In my case, I got:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful.<br>ORA-02047: cannot join the distributed transaction in progress<br>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;There are several suggestions, if you follow that thread, about character sets or reviewing some of the line breaks within pl/sql code within your processes etc. Not sure what would work for you. -
Using LDIFDE to Export/Import configuration
Hi All,
I need to create a "copy" of a domain using LDIFDE. To do that, I exported the Configuration, Schema, OUs, Users and Groups. I'm having plenty of troubles during the import, so I wanted to clarify a few things:
1) What order should the data be imported in? I was thinking importing Schema, then Configuration, then OUs, followed by Groups and finally Users
2) Is there an easy way to remove the extra spaces from the LDIFDE extract? I did a search and replace in notepad to change the domain from DC=abc,DC=com to DC=xyz,DC=com, but there are lines where the original DC is split which is a royal pain to clean
up!
3) When doing an import from Schema or Configuration, I get this error
PS C:\tmp> ldifde -i -f .\schema_export.ldf -v -j C:\tmp\
Connecting to "mydomain.xyz.com"
Logging in as current user using SSPI
Importing directory from file ".\schema_export.ldf"
Loading entries
1: CN=Schema,CN=Configuration,DC=xyz,DC=com
Add error on entry starting on line 1: Unwilling To Perform
The server side error is: 0x2079 The specified instance type is not valid.
The extended server error is:
00002079: SvcErr: DSID-03330968, problem 5003 (WILL_NOT_PERFORM), data 0
0 entries modified successfully.
An error has occurred in the program
I can't figure out why this is happening.
Any help will be much appreciated :)> I need to create a "copy" of a domain using LDIFDE. To do that, I
> exported the Configuration, Schema, OUs, Users and Groups. I'm having
> plenty of troubles during the import, so I wanted to clarify a few things:
Why would you need to import schema and configuration? And why do you
not simply join a DC to your domain, take it down and do metadata
cleanup, then start this new DC in its own environment? Much simpler
than your approach, I believe :)
> 1) What order should the data be imported in? I was thinking importing
> Schema, then Configuration, then OUs, followed by Groups and finally Users
That's what I would think, too.
> 1: CN=Schema,CN=Configuration,DC=xyz,DC=com
> Add error on entry starting on line 1: Unwilling To Perform
"Add" for what? What's the content of this file?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Issues with exporting video from MacBook Pro to flash drive
I cannot sucessfully transfer [export] video taken on my gopro camera, from my MacBook Pro to any flash drive and play them on other computers. For some reason the files are not playable, even with quicktime. They will not play with ANY of my video softwares such as divx or any AVCHD software on a windows computer. I need to make a presentation for a club trip in a few days! Can any one please suggest what is wrong? They play on the Mac using Flip player but not quicktime!
Oh, and I don't have issues with transfering or exporting Jpegs or other photo formats. Only video.
Message was edited by: gmob25hmmm.. the files from GoPro are already mp4 format. The Flash is already FAT32, brand new 16gig...
I am new to Macs but have no problems with PC's. I suspect that because the files are exporting as shadowed files which won't play and are very small kb files, yet they are actually in excess of 140 mb each that it might have something to do with the iphoto software? That's where the pics and video are, they imported to there by default, not to a folder in the home folder [which is where I would have expected them to be]
By the way, the GoPro is already in mp4 format so it is easy when transferring to computers. No need to convert. I tried converting them to see what the outcome might be, and none worked! I tried every format I could find using Video converter ultimate software, which is excellent.
And the problems began when quicktime wouldnt play the file, the screen was black.
Maybe you are looking for
-
Can you see which timeline clips are being used in Media Browser?
I'm a relatively new user and may not be familiar enough with cs5.5 but is there a way to see what clips are being used on the editing timeline in the media browser. I open premiere pro - Project is loaded. I edit the scene until it is finished. When
-
Sorting Albums in a Playlist by Title???
Hello, I created a Smart Playlist and when I change the grid view, the albums sort by Artist only and I cannot figure out how make them sort by Album Title. Can anybody help? Cheers
-
I have a friend who runs a small company with approximately 10 users. They are currently using Small Business Server 2003 and are using Exchange 2003 to a limited degree. They are using POP accounts with a hosting company for external email and are
-
How to read a txt file then insert them into db tables
Hi, Please help me to solve this problem. This is what I need to do: 1. read a text file which holds the values to be inserted into some database tables. For example it holds ename, deptno, sal, dname for emp and dept tables. These are in a text file
-
so when i tried to plug my i pad mini charger to my computer it said "NOT CHARGING" its not the cable because this is my second cable! What do i do?