Issue with F4 option via FM REUSE_ALV_GRID_DISPLAY_LVC

Hi,
I am using the function module REUSE_ALV_GRID_DISPLAY_LVC do display an ALV report. One of the fields has a drop down option. When selecting this option a popup appears with two columns. The key of the values allowed and the corresponding text. When selecting a row, the key value appears on the ALV report. However, a popup then appears with a conversion issue.
Has anybody has this issue before.
Description does not match target field
    Message no. DB862
Diagnosis
    A value should have been converted from an external to an internal
    field format. However, the field description (type "N", length 2) does
    not correspond to that of the target fiedl (type "C", length 40).
System Response
    The system cannot convert the field.

Hi Sandeep,
Thanks for ur reply. I need to receive the change made in ALV grid by the user in the input column.
For this I used "check_changed_data" method but when field get blank values(Initially the field will have some value) it is not returning the change to internal table on action but Previous value persist.
Any suggestions.
Thanks&Regards,
Karthik

Similar Messages

Issue with backup NCS via NFS (Cisco Prime NCS 1.2.0)

Hello,
Does someone have issue with backup NCS via externally mounted location (NFS)?
I have Cisco Prime NCS 1.2.0 and tried backup it to external resources, but I have issue with my free space:
NCS/admin# backup ncs repository backup_nfs
% Creating backup with timestamped filename: ncs-130131-0534.tar.gpg
INFO : Cannot configure the backup directory size settings as the free space available is less than the current database size.
You do not have enough disk space available in your repository to complete this backup.
DB size is 25 GB
Available size is 12 GB
Please refer to the command reference guide for NCS and look at the /backup-staging-url/ command reference to setup the backup repository on an externally mounted location
Stage 5 of 7: Building backup file ...
-- complete.
Stage 6 of 7: Encrypting backup file ...
-- complete.
Stage 7 of 7: Transferring backup file ...
-- complete.
I have tried to add additional space and use command backup-staging-url (my configuration: backup-staging-url nfs://server2008:/nfs), but it didn't help me.
NFS share works perfect. I have checked it via NFS repository:
repository backup_nfs
url nfs://server2008:/nfs
+++++++++++++++++++++++++++++++++++++++
NCS/admin# show repository backup_nfs
NCS-130130-1135.tar.gpg
NCS-130130-1137.tar.gpg
NCS-130130-1157.tar.gpg
NCS-130130-1158.tar.gpg
test-130130-1210.tar.gz
Everytime when I try create backup I receive error message "You do not have enough disk space available in your repository to complete this backup".
Does someone know how can I backup NCS system?
Thank you

How much space is availabe on that NFS mount point? It looks like to me from the error message that there is only 12 GB....
The backup-staging-url is just for a space used to stage the backup before it is written-----

Issue with Select options in select statement - ABAP Question

Hi
I am facing an issue with select options. Select statement is returning sy-subrc as 4.
I wrote the program as below:
SELECT-OPTIONS:
s_kunnr FOR bsad-kunnr,
s_lifnr FOR bsak-lifnr,
s_gjahr FOR bsad-gjahr,
s_bukrs FOR bsad-bukrs,
s_saknr FOR bsad-saknr,
s_budat FOR bsak-budat.
In start of selection I have written the select statement as
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
In selection screen I have not entered any values and executed the program. I am not getting any result. When I debug that, sy-subrc is 4 at above select statement. But table has records.
If am removing the "lifnr = s_lifnr " condition in select then select is returning values.
I am not getting where I made the mistake. Please suggest.
Thank you
Hanu

Hi,
The problem here with where condition select option lifnr = s_lifnr.
Use below select query.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs
    AND lifnr     IN s_lifnr
    AND gjahr   IN s_gjahr
    AND budat IN s_budat
    AND saknr IN s_saknr.
s_lifnr is a select option and you are passing it as parameter lifnr = s_lifnr.
if you want to pass this s_lifnr as single vale then pass in below mentioned way.
lifnr = s_lifnr-low
BR,
Vijay

I have an issue with disappearing option for 1920x1080 in Preferences / Displays.

Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080. This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
I have tried:
Power down Monitor & restart
Shutdown & restart
Shutdown & restart in Safe Boot Mode (options same in Prefs)
Power down Monitor & restart in Safe Boot Mode
Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
Udated Pram
I am now at a loss, I guess I could try a recovery, and download/install Mavericks again, but do not wish to do this if I can help it.
I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
Anyone out there have any ideas, please.

Back up all data. Quit System Preferences if it's running.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Preferences/ByHost
In the Finder, select
Go ▹ Go to Folder...
from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
Test.

Having issues with sending attachments via iMail to PC users

Having issues with sending attachments via iMail to PC users. Either they do not see all the attachments or the attachment comes across blank. Is there any suggested ways to resolve this?

You can also use Dropbox. 2GB free. Put files in the Public folder and you can send them links of the files instead.
You can use my referral link http://db.tt/MXNpy62 to create an account.

Duplication Issues with Photo Sync via iTunes/iPhoto and Photo Stream/iCloud (Detailed Scenario Given)

Hi Everyone,
I'd like to share an issue I am having with photo syncing between my iDevices.
Here is how I USED to sync my Photos between my iDevices (no issues with photo duplication)
Note: In this scenario, I use iTunes and iPhoto on my Mac. iCloud and Photo stream have NOT been activated in this case.
1. Take photos via iPhone that saves in Camera Roll
2. After a month or so, I will connect my iPhone to my Mac.
3. Import my Photos in iPhoto and arrange Events and Photos in monthly sections and add some of them in a separate Albums (ex. Written Notes Photos) for easy access.
4. Once the import is done, iPhoto prompts an option to delete photos in my Camera Roll which I do as I like to start a fresh month with empty Camera Roll in my iPhone.
5. In order to access the Photos I have imported in iPhoto in my iPhone, I go to iTunes and sync all my photos to my iPhone. This syncs my events, photos, faces, albums as they have been arranged in iPhoto in my Mac. (I cant delete them in my iPhone once they are synced. I have to delete in my iPhoto and sync again to have similar setup in my iPhone which isn't a problem).
NOW I decided I don't want to manually go through all this process and went on to enable the Photo Stream ON in my iPhone and iPhoto with iCloud.
THIS IS WHERE THE PROBLEM ENSUES.
1. I Take photos with my iPhone that saves in Camera Roll
2. This automatically syncs with my Mac due to Photo Stream which a really convenient.
3. It syncs automatically to Photo Stream, Events, Photos, Faces section in the iPhoto and I put put some of them (notes) in a separate album.
THE PROBLEM:
The Photos does not show up in the Album, Events and Photos Folder in my iPhone. They are only shown in Camera Roll. So I thought to sync using iTunes so the new Photos will be arranged in their appropriate folder like it used to with my prior process of syncing. This worked, HOWEVER the photos in my iPhone started showing DUPLICATES! Apparently, one comes from Photo Stream (which, if I delete on my phone also deletes in all my iDevices) and the other duplicate is from the iTunes sync (this sets up my photos as arranged in iPhoto which is what i WANT to happen as Photo Stream does not sync them accordingly).
SOLUTION I AM IN SEARCH FOR:
I want to be able to take photos with my iPhone that automatically syncs in iCloud AND iPHOTO AS ARRANGED IN MY MAC (Albums, Events etc) WITHOUT PROBLEM OF PHOTO DUPLICATES.

Other folks have resolved similar issues by trashing the iPod Photo Cache.
Regards
TD

Issue with Staple option in Office 2010

We are having issue with printing with staple in Office 2010. We have Ricoh follow-me printing setup with 2 printer queue B&W and Colour. When select print in Word using Colour, we can
see the staples option.
But this option disappear if we use B&W queue.
We have checked printer driver and logged a job with Ricoh. Here is what we have from Ricoh. We are using Office 2010 14.0.6029.1
"Yes I can see below you have set it up correctly for both machines.
Seems to me that Office is not displaying that option which is unrelated to what driver you are using. Both the drivers are the PCL6 version and the finisher has the staple functions enabled
so in theory it should display the staple option for both print queues.
You will need to query Microsoft about this one because as far as I can see there is no fault with the way you have the Ricoh drivers installed or the machine itself. "
Any idea?
Cheers,

This is an issue between Ricoh and Microsoft. Ricoh should not be trying to shuffle it off to you. The support person is an idiot and you need to escalate it with Ricoh. Since all of the print settings are controlled by the print driver from Ricoh, if
this is really a Microsoft problem, the developers at Ricoh should acknowledge in writing that they have filed a bug report with Microsoft.
Kind Regards, Rich ... http://greatcirclelearning.com

Issue with profile Options in Inventory

I am trying to work with profile options in Inventory and I have 4 Operating units and 2 Legal Entity and 1 Business Group.
At this point I am not sure as how to attach OU to MO:OU ( as there are 4). Similar concern is for GL Ledger..
Please help....

Hi Hanu,
In the select query, u can replace s_lifnr with s_lifnr-low, since when we enter values in selection screen, they get stored in a table structure. hence directly equating it to s_lifnr, will not fetch any records.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr-low AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
Hope this helps!!!
Prerna

Issue with Select Options

Dear Experts,
I used component wdr_select_options to achieve select options functionality, But it displaying only one field as per my requirement user expecting both low & high fields.
Can you guide for 5 select options whether i have use t times the component at my component level.
And also could please guide me how to use select options at code level.
Thanks & Regards,
Siva Mandapudi.
Edited by: SIVAMANDAPUDI on Jul 18, 2011 6:39 PM

Hi Saravan,
Please find below details.
The exception is:
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "ONACTIONSEARCH_SUPPLIER" "(METHOD)", nor was it propagated by a
RAISING clause.
code:
DATA FOR WORKING WITH SELECT OPTIONS
data: rt_SUPPLIERNO type ref to data.
data: rt_SUPPLIERNAME type ref to data.
field-symbols: <fs_SUPPLIERNO> type table,
                <fs_SUPPLIERNAME> type table.
TYPES: BEGIN OF T_SUPPLIERNO,
         SIGN(1),
         OPTION(2),
         LOW TYPE /SAPAPO/LOC,
         HIGH TYPE /SAPAPO/LOC,
        END OF T_SUPPLIERNO.
TYPES: BEGIN OF T_SUPPLIERNAME,
         SIGN(1),
         OPTION(2),
         LOW TYPE /SAPAPO/LOC_DESCR40,
         HIGH TYPE /SAPAPO/LOC_DESCR40,
        END OF T_SUPPLIERNAME.
DATA: WA_SUPPLIERNO TYPE T_SUPPLIERNO, IT_SUPPLIERNO TYPE TABLE OF T_SUPPLIERNO,
        WA_SUPPLIERNAME TYPE T_SUPPLIERNAME, IT_SUPPLIERNAME TYPE TABLE OF T_SUPPLIERNAME.
Retrieve the data from the select option
rt_SUPPLIERNO = wd_this->m_handler->get_range_table_of_sel_field(
                           i_id = 'ID_SNO' ).
dump raising when get_range_table_of_sel_field is called.
Thanks a lot.
Regards
Siva Mandapudi.

Issues with Chinese characters via HTTPRequest

We have the below scenario:
http --> PI --> IDOC
Before the message arrives to PI we do the conection with the below code:
String urlString = WDConfiguration.getConfiguration("local/AIB_PAD").getStringEntry("HTTPURL");
     java.net.URL url = new java.net.URL(urlString);
     HttpURLConnection connection = (HttpURLConnection)url.openConnection();
     connection.setDoInput(true);
     connection.setDoOutput(true);
     connection.setUseCaches(true);
     connection.setRequestMethod("POST");
     connection.connect(); //(http connection is made)
this conection transform all chinese characters to "?"
Does anybody knows what is missing to receive the chinese characters to PI correctly?
Thanks.
Edited by: Israel Toledo on Sep 29, 2011 1:27 AM

Hi Mark,
Thanks for your answer.
We are sure that both systems support chinese characters, because when we see the outbound XML generated on the source system(JAVA SAP Portal) it looks good. Also, when we send an XML to PI via HTTP client using Java script, it works good.
The issue is when we make the connection to PI. I thing some parameter is missing. could be the text code (UTF, unicode), but we are not sure how to change that in the Java code.

Rasterization issues with overprint option with AI CS5(only)

Hello
This issue occured only with AI CS5.
I need to export several times a document into a png file. My document contains objects with the overprint option activated.
So I decided to make an action. The action runs well. But if I quit Illustrator and reopen it, the script doesn't run well anymore.
The overprint flag is ignored and moreover when I try the rasterize command from the menu I have the same result.
Can we hope a correction for this issue ?
Notice : The default rasterization action (Rasterize selection) provided with Illustrator doesn't work. I have the following message "The object Rasterize" is not currently available."
Normally this message occurs when there are no selected objects in the document but in this case I select the object.
Thanks

I know that, we are working with files for printing industry. We have documents with pantones and overprinting areas.
We want to have an image file which can simulate the overprinting effect. This file is then applied to a 3D object. The 3D viewer cannot read PDF files or AI files that why we chose the png format.
The format is not really important.
The issue I mentioned occurs before exporting into an image file. When Illustrator converts the artwork in a raster art object, it skips the overprinting effect.
The problem seems to come from the action (script) after quiting and reopening Illustrator and only CS5 is affected by this problem on Windows and MacOS X

Issue with switching spaces via clicking application in the dock

Hey guys,
Sometimes, not all the time, when I click on an application in the dock that has windows open in another space, it switches to the appropriate space, but with the application I clicked on not in the foreground. If I have other application windows open in that space, sometimes they occupy the foreground, and subsequently, the application I have clicked on on the dock is not in view. It is highly annoying when I click on the dock icon, to find that I have to go down and click on the dock icon a second time to bring the app into view. Does this happen to anyone else?
Cheers guys,
Ric.

Thanks KXsig.
I've been upgrading from 10.5.8 to 10.6.4 last sunday. Since then, switching between different Spaces with Magic Mouse, i've got that issue of a third party application dedicated to Spaces number 6, and appearing also in background of Spaces 4 dedicated to Safari, or also in any free Spaces spot, when the application dedicated is not opened.
That didn't happened with Leopard, thanks a lot for the keyboard shortcut "Command + Tab".
Maybe a fix in 10.6.5 to come..

HT4437 Issues with connecting PC via Airplay to Aiport Express

I use iTunes 11.0.2.26, Airport Express 7.6.3. and can see the Airplay button and also select my Airport Express Device as a speaker. However, iTunes is unable to connect from my PC. I am using Windows 7 Professional.
On the same WiFi network and with the same Airport Express I am able to stream music from my Macbook Pro and iPhone - so the issues seems to be related to either Windows 7 or my Lenove T400s.
Does anyone have an idea what the solution could be?

Strange. I can't remember changing any network settings for this but I have only tried it on OS X. Maybe this is a firewall issue on your computer?

Issues with incoming mail via Outlook

Hello,
I have setup several email accounts using Business Catalyst. Ican access all of them through Webmail. and most of them via Outlook.
one account hower shows issues via Outlook:
* I can access it via Webmail.
* I can send emails from Outlook
* But I cannot receive emails on Outlook.
Again, I can have the emails from other BC accounts, but not on this one. my incoming server port is 110, outgoing is 8025.
did someone face this issue once?

Thanks Sydney.
For your record, or for future treatment, the email address that had issues was [email protected]; while simultaneously, on the exact same computer and outlook software, the address [email protected] was working properly and as expected.
If you face similar type of issues, and remember my case (J), please do not hesitate to keep me posted: I hate not knowing what happened, question of trust.
Thanks,
Philippe

Issue with instant ringback when using sip trunk to SP

Hi all,
We use CUCM 8.0.2.
We have a SIP trunk to a SP connected via one of our Cisco 2911 routers configured as a CUBE.
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
c2900-universalk9-mz.SPA.150-1.M3.bin
Cisco CISCO2911/K9 (revision 1.0)
Technology Package License Information for Module:'c2900'
Technology Technology-package
                  Current       Type
ipbase        ipbasek9      Permanent
security      securityk9    Permanent
uc              uck9            Permanent
data           None            None
We also have several ISDN lines that run out via various Cisco routers configured as H323 gateways.
We use 7945 and CIPC for our phones.
We're having an issue with calls going via the SIP trunk where we hear ringing instantly after dialling - but before the actual device at the other end starts ringing (considerable difference).
Using the SIP trunk: If I make a call to my mobile phone - I hear ringing instantly - about 3 rings before my mobile phone actually starts ringing - undesireable.
Using H323 gateway: If I make a call to my mobile phone - I hear silence for a bit - then ringing when the mobile starts ringing - desired.
Using SIP trunk: If I make a call to a landline that is ready - it rings instantly for at least 1 ring - before the actual phone I'm calling starts ringing - undesireable.
Using H323 gateway: There is a momentary pause before hearing ringing on my phone and the phone I dialled - desired.
Using SIP trunk: If I make a call to a landline that is off-hook (with no call-waiting/etc.) - it rings once and then returns the busy signal (the worst issue) - undesireable.
Using H323 gateway: There is a momentary pause before hearing busy signal - desired.
Phone to phone internally (same network): Operates as expected (instantly rings locally and on the phone I'm calling). Between phones that utilise the SIP trunk and phones that utilise the H323 gateways within the same network - communication is instant and as expected.
Any ideas why this happens and how to stop it?
I want it to not ring until the situation is known and that it can provide the appropriate feedback (ringing/busy/etc.).
Some possibly relevant config (note that there is a known bug with this IOS that meant I had to declare the codec in each dial-peer as the voice class would not work):
voice service voip
address-hiding
mode border-element
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
header-passing error-passthru
early-offer forced
midcall-signaling passthru
interface GigabitEthernet0/0
ip address x.x.x.x 255.255.255.252
ip access-group acl.SIP-IN in
no ip redirects
no ip unreachables
ip verify unicast reverse-path
ip virtual-reassembly
duplex full
speed 100
no cdp enable
gateway
timer receive-rtp 1200
sip-ua
connection-reuse
gatekeeper
shutdown
dial-peer voice 1 voip
description *** INBOUND CALLS FROM CARRIER ***
translation-profile incoming SIPTRUNK-INCOMING
session protocol sipv2
incoming called-number #blah blah#
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 61 voip
description **** WA, SA AND NT NUMBERS ****
destination-pattern 0[8]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[8]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 81 voip
description **** MOBILE NUMBERS ****
destination-pattern 0[4]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[4]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 500 voip
description *** INBOUND SIP TRUNK TO CUCM PUB ***
translation-profile outgoing SIPTRUNK-CALLING-ADD-0
preference 1
destination-pattern 5[12]..
session protocol sipv2
session target ipv4:<OUR CUCM PUBLISHER IP>
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
Any help or a point in the right direction would be greatly appreciated.
Cheers,
Brett

I ended up resolving this issue as follows:
In CUCM, under Device > Device Settings > SIP Profile.
I modifed the profile relevant to my SIP trunk, under the "Trunk Specific Configuration", I set "SIP Rel1XX Options" from "Disabled" to "Send PRACK if 1xx Contains SDP".
Now, I get the expected delay before hearing ringback.
Solved!

Issue with F4 option via FM REUSE_ALV_GRID_DISPLAY_LVC

Similar Messages

Maybe you are looking for