Issue with Feature Deployment when DB and Web Server are on different machine

Hi,
We are trying to deploy our Custom Processes as site feature.
In Visual studio it shows Deployment Succeeded but feature is not available in Site features.
when we checked “Central Administration -> Manage Farm Solution” it shows below error.
Web Server : The solution was successfully deployed.
DB Server IP : Elements of type 'Receivers' are not supported at the 'Farm' scope. This feature could not be installed.
DB Server IP : Elements of type 'Receivers' are not supported at the 'Farm' scope. This feature could not be installed.
We are able to ping DB server from Web Server .
Also , we are able to add custom fields and lookup manually in web Server and those are getting reflected in DB .
Thanks,
Abhijit

Hello,
I would probably post this in the SharePoint forum as deploying features is a SharePoint process and not Project / Project Server (even if the feature is related to Project Server).
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Similar Messages

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

Intel vPro AMT integration with SCCM 2012R2 - Issues with SCCM finding the "ConfigMgr AMT Web Server Certificate"

Good evening all,
I'm attempting to get Intel SCS integrated with SCCM 2012 R2 and I have both sides working, doing what they do best, however, I have issues when I try to mate the two. I started with a single server for the site and then tackled the Intel side with success,
then I added another site server to run the Out of Band service point and Enrollment point. Up until this point I've had no issues with certificate templates, or issuance of those certs.
I have re-read the TechNet documents a few times regarding the PKI setup, some Intel documentation and three step by step articles and non of them seem to differ so I can't understand why I'm unable to choose my "ConfigMgr AMT Web Server Certificate"
when configuring the Out of Band Management Component Properties page. The "AMT web server certificate template:" dialog shows my CA FQDN and CA name, but the certificate template list is always blank. I've tried this from both the remote
and local ConfigMgr consoles. The site servers have rights on the CA to manage and issue certs, is there something I'm missing that isn't in the documentation or buried somewhere that I missed? Is there a Application policy that should be on the
cert that isn't mentioned anywhere?
Thanks in advance!
Tesfaye

Hi Joyce,
Thanks for responding. I pretty much have this error repeating in the log file and not much else:
[28, PID:13388][05/21/2014 15:17:15] :System.DirectoryServices.DirectoryServicesCOMException\r\nThere is no such object on the server.
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne)
   at System.DirectoryServices.DirectorySearcher.FindAll()
   at Microsoft.ConfigurationManagement.AdminConsole.Common.ADUtils.EnumEnterpriseCACertificateTemplates(String domainEntryName, String certAuthorityFqdn, Boolean isServerAuthen)\r\n
I will look into this, but another hint would be greatly appreciated!
Thanks,
Tesfaye

Are WebSAPConsole and Web Console are two different offerings from SAP ?

We have been using SAP Console based on Telnet to provide RF functionality and I know that SAP is now delivering WebSAPConsole which is an enhanced SAPConsole
to support web-equipped devices.
With Mobile Infrasturture, SAP is delivering WebConsole with 6.40 WAS standard and If I understand correctly, role of this webconsole is to help deploy ME clients on the handhelds...etc.
Please comment and correct me if I am wrong ?
Thanks,
Raja

SAP WebConsole is base on WAS architecture.
You can also get the standard framework from cSofgroup, Inc. cSoftgroup, Inc is the certified Powered by SAP Netweaver partner for implementing SAP Console, SAP Centralized Shipping Solution to interface with FedEx, UPS, DHL, LTL, USPS and other carriers.
Please find the attached links about SAP Console & SAP centralized shipping solution and our SAP Netweaver blueprint services.
http://www.csoftgroup.com/aboutus/SAP_Console_WebConsole.pdf
http://www.csoftgroup.com/aboutus/SAP_CentralizedShippingSolution.pdf
http://www.csoftgroup.com/aboutus/SAP Netweaver_BLUEPRINTSVCS.pdf
contact Info : [email protected]
ph# 408 836 7074
www.csoftgroup.com

Issue with pasting text when saving for web and resizing

This seems to be a very specific problem in PS CC 14.2.1 Mac.
I have text in the clipboard.
I go "SAVE FOR WEB" then "SAVE . . ."
I can then paste my name into the "Save As" name dialog.
BUT
If I I go "SAVE FOR WEB" then change the size of the file in the Image Size Box before I "SAVE . . ." I can no longer paste text in the naming dialog box.
I haven't tried this for every permutation in the Save For Web dialog, but saving optimized as JPEG is what I'm having trouble with.
I believe this is a bug.

What might be happening is after you change the image size in the save for web dialog, one of the size fields is still highlighted, so when you paste
in the save as dialog, the name is actually being pasted in one of the size fields in the main save for web dialog.
After you change the size in the save for web dialog press the enter/return key and then see if pasting into the name field of the save dialog in save for web works.

Issue with WAN Miniport when setting up VPN server in Windows 7

I tried making my computer a VPN server by setting up a "New incoming connection" under network connections within Network and sharing center. Originally, it did complete but did not show any WAN Miniport connections. I could not connect to this VPN
with my other computer.
What I've done so far:
I "updated" all the WAN Miniports in Device Manager to "MAC Bridge Miniport" driver (since I could not uninstall them as they were) and then proceeded to uninstall all the WAN miniports. I rebooted my computer and then the device
drivers tried to install automatically but only a few installed successfully.
I then downloaded the latest WDK (8.1) and tried re-installing all the WAN Miniports via devcon.exe with the command "devcon.exe install c:\windows\inf\netrasa.inf MS_PptpMiniport". It said that the node was created but it failed to install the
drivers. I rebooted my computer but some of these mini ports appeared as "Unknown" in Device Manager while others appeared with their names but with numbers attached since I've attempted this a few times, Ex: "WAN Miniport (IP) #3".
from my understanding, I need at least WAN Miniport pptp to be working for VPN to work. I don't know what to do at this point. Any help is greatly appreciated. Thanks in advance.
Gateway DX4822-01 Desktop PC
Windows 7 64-bit, SP1

Hi,
Please try to use Incoming connection troubleshooter to fix this problem for test. If it identify any problem that couldn't fix this problem, please provide the error message here.
Control Panel\All Control Panel Items\Troubleshooting\All Categories
Roger Lu
TechNet Community Support

Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

Hi BC,
I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
This is causing us mayhem.
We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
Jo

Hi there,
The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

Hi. I work in an enterprise environment that is currently migrating to 64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working." I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
I'll ping some folks about the error you are getting. . .
hth,
Ben

Issue with Emoji icons when sent from iOS6 to iOS5

Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
Both iOS are the current version and the phones are 4S 64GB
Anybody got this problem

Hi!
What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
Regards,
Volker

Driver Issues with HP Officejet Pro 8600 and Windows 8

I have to reinstall the printer driver for my HP Office Jet Pro 8600 wireless printer each time I power up my laptop. I do not have any issues with this printer when using my PCs and my antroid tablet. Once the driver is reinstalled I can print my documents however it becomes "offline" whenever I log off and then log back onto my laptop.

Hello there! Welcome to the forums @Shrn
I read your post about how your printer will disconnect and show offline on your laptop, each time the computer is restarted. As this only happens on your laptop, the problem could be with a firewall running on your computer.
I would suggest checking your firewall settings and ensure you're allowing the printer to connect within the firewall.
This link may help: How to Edit Firewall Settings
You could also try running the Print and Scan Doctor when you restart your computer to see if this tool will pick up the printer on the network and connect it to your computer again.
Another option, would be to try a Clean Boot, which will turn off all Start Up Programs on your laptop to see if another program could be blocking the printer from connecting to it during a restart. Make sure to go back and enable the programs again after you have tested this out.
Let me know your findings and what happens!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
"Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
Any other ideas?
EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N)

Hello experts,
For this thread, please check the following link:
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Thanks and Regards,
Daniel.

Hi Experts,
The question has been answered as per the following "link":
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Daniel

I have an issue with speaker/microphone. when i call or i recive a call the person on the other side can not hear me.

i have an issue with speaker/microphone. when i call or i recive a call the person on the other side can not hear me.

Hello aalapdesai112,
Lets see if we can get you back to taking calls normally again. Start your troubleshooting with the article below and go through checking to making sure that you are up to date with your iOS as well as a simple restart on your iPhone.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Regards,
-Norm G.

I'm having issues with audio apps randomly stopping and starting. Also, Siri just randomly opens. For example, podcasts will stop playing in the middle of a playback. Do you have any thoughts?

So I noticed the problem with the app iHeart Radio. While listening to the app, it would stop playing without any noticeable issues. For example, I'm on a WiFi network, operating it where I normally had no issues. I deleted the app because if became so annoying. I now notice the same issues with podcast app when playing back a downloaded program. Also, more than a few times of the day Siri will just randomly open. I am wondering what options do I have to discover the problem. COuld it be the most recent IOS update? I don't want to have to restore an old backup and loose data.

So I noticed the problem with the app iHeart Radio. While listening to the app, it would stop playing without any noticeable issues. For example, I'm on a WiFi network, operating it where I normally had no issues. I deleted the app because if became so annoying. I now notice the same issues with podcast app when playing back a downloaded program. Also, more than a few times of the day Siri will just randomly open. I am wondering what options do I have to discover the problem. COuld it be the most recent IOS update? I don't want to have to restore an old backup and loose data.

Issue with Feature Deployment when DB and Web Server are on different machine

Similar Messages

Maybe you are looking for