Issue with FM 'STATUS_CHANGE_EXTERN' using ABAP Proxy

Hi Experts,
I am using the FM 'STATUS_CHANGE_EXTERN' & 'STATUS_CHANGE_INTERN' to change the user status & system status using ABAP Proxy.
But SAP is updating the system status using ABAP Proxy through ''STATUS_CHANGE_INTERN'' but not updating the User stauts 'STATUS_CHANGE_EXTERN' using ABAP Proxy but when run the same in foreground then it's working fine..
I have already used the External Commit for the same.
Please help me in this case.
Thanks in Advance
Sachin

After call of CRM_STATUS_CHANGE_EXTERN you need to call BAPI_TRANSACTION_COMMIT.
call function 'CRM_STATUS_CHANGE_EXTERN'
    exporting
        objnr               = iv_guid
        user_status         = iv_status
    exceptions
        OBJECT_NOT_FOUND    = 1
        STATUS_INCONSISTENT = 2
        STATUS_NOT_ALLOWED = 3
        OTHERS              = 4
if ( sy-subrc = 0 ).
    call function 'BAPI_TRANSACTION_COMMIT'
        exporting
            wait = ABAP_TRUE
else.
    "!+ Handle error
endif.
Best regards,
Tomas.

Similar Messages

Web Service consumer using ABAP-PROXY

Hello,
I want to test Web Service consumer using ABAP-PROXY . So I do what is explain in the weblog :
[http://wiki.sdn.sap.com/wiki/display/Snippets/WebServiceconsumerusingABAP-PROXY]
But when I execute the programm, the message : 'No valid source context supplied'.
But, proxy and port are ok and activate.
Can you help me.
Thanks.

Hi Jitesh,
Thanks for the link. I checked but did not find helpful info there.
I have managed to make it work yesterday. Two issues were identified.
1. The namespace in the WSDL file imported into ESR as an external definition. I need to create the same namespace in ESR before importing the WSDL and then import the WSDL into that namespace.
2. The authentication method. The authentication method in the IIS configuration of the .NET web service has to be set to Basic Authentication. Then I set logical port of the consumer proxy in the OSAMANAGER to use Basic Authentication also. So far only the Basic Authentication works in my test scenario.
I am closing this question.
Regards,
Jiannan

Outbound interface using ABAP Proxy

Hi Guys,
I am trying to create an interface between a Z table and XI using ABAP Proxy. I suggested file based interface, but client is insisting using ABAP proxy. Z table is in IS-Retail side.
I will appreciate is somebody can share a program to do this.
Any advise/guidance is appreciated.
Thanks,

Hi There
From your subject line i can see that you want to develop an outbound proxy which means you want to send data to XI from your SAP custom table. That means you need to extract all the information from your Z-table and send it to XI via proxy.
If my understanding is correct then what you need to do is :
1.Ask your XI team team to generate a message interface for you of type 'outbound' and include the structure in the way they want you to send data to them.
2.Once the message interface is created by them , you can generate the same in transaction SPROXY . Search for your interface namespace and then right click
on it and say 'CREATE' . Give the appropriate package and prefix to it.Generate the proxy, save and activate
3. Now you can create a report and then according to the structure generated by XI , you can popluate your internal table to be passed back.
4. Call the method of the proxy in your report and send the data to XI.
I can give you an example of how to do this:
suppose you have built up an internal table by extracting data from your Z-table .Lets say it is tbl_output.
In your report you need to trigger the proxy method as follows:
Note: i am assuming i am triggering an asynchronous proxy method from my report:
DATA:lo_senddata TYPE REF TO CL_DATA_OUT,
 lo_system_fault TYPE REF TO cx_ai_system_fault,
 lo_root TYPE REF TO cx_root.
ls_output-output_file-data[] = tbl_data[].
CREATE OBJECT lo_senddata
TRY.
* call the asynchronous method of the proxy and send the data
 CALL METHOD lo_senddata->execute_asynchronous
 EXPORTING
 output = ls_output.
* get the system exceptions and display the error text
 CATCH cx_ai_system_fault INTO lo_system_fault.
 WRITE:/ 'System Error:'(E01),
 lo_system_fault->errortext.
 RETURN.
* get the root exception and display the textid value
 CATCH cx_root INTO lo_root.
 WRITE:/ 'System Error:'(E01),
 lo_root->textid.
 RETURN.
 ENDTRY.
COMMIT WORK.
Note: 1. CL_DATA_OUT is the message interface class.
 2. ls_output is the output structure to be sent back to XI and data
 is an internal table with the same structure as tbl_data.
 3. It is very imp to catch exceptions as i have shown u above.
Please let me know if you are a little clear or you need some more clarifications on this.
cheers
shivika

Transaction Update Error using ABAP Proxy

Hi Experts,
I am facing an issue using ABAP Proxy.
File is coming from PI to SAP system and it will update the Transaction IE02 using this inbound ABAP Proxy. If records fails then a mail is going to concerned team.
Issue:
When File has been sent from PI to SAP through ABAP Prxoy, it shows that record has been updated in the Transaction IE02 but when I checked manually the record, it has not updated the same. But when I test the same record through my ABAP Prox, it updates the record and when I checked it, Reocrd hs been updated.
Can anybody help me in this case?
Regards
Sachin

Hi Anup,
Can you please explain me for the same? If I need to put External Commit then how It is working when I running it manually
Regards
Sachin

Is EOIO messaging possible using ABAP Proxy in WAS 620?

Hello,
I am trying to implement an outbound EOIO interface using ABAP Proxy on a SAP R/3 470 running on WAS 620. We have XI 3.0 running on WAS 640. I followed the SAP documentation available at http://help.sap.com/saphelp_nw04/helpdata/en/c9/74246d8ad2447799063d39013e9a11/frameset.htm
I find that the interface IF_WSPROTOCOL_ASYNC_MESSAGING required in this exaple does not exist in our R/3 system. I also notice that proxy classes generated on WAS 640 have the superclass of CL_PROXY_BASIS. But the proxy object generated in WAS 620 have no superclass at all.
Does anybody know how I can get EOIO interfaces to work on the WAS 620? Did you use these objects? Can I import / install them somehow? Or, is EOIO just not possible in WAS 620?
Please let me know.
Regards
Cerish Chemparathy

HI,
have a look at this link to the ABAP Proxy Runtime based on WAS 6.20 (Xi 2.0) http://help.sap.com/saphelp_xi20sr1/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
There is a help entry called Guatanteeing the Order of Asynchronous Messages. Seems that you somehow can set a queue id for this messages and as long as theses messages are all in the same queue, the order will be maintained.
Your observations are right, there are differences between the Proxy Runtime in WAS 6.20 and in WAS 6.40 and as far as i know, there is no way to downport the 6.40 runtime to 6.20. You will need to stick with wath 6.20 offers.
Regards
Christine

HTTP GET using ABAP Proxy

Hi,
Has anyone tried invoking an HTTP GET using ABAP Proxy?
It seems we can do it using the func module HTTP_GET....
I have seen a blog using java proxy but I want to do it using ABAP proxy...
regards,
Piyush

Hi All,
With my research on SDN, I came to know that we can either do it using HTTP_GET or the calss CL_HTTP_CLIENT.
But can I do it for a very long HTTP url????
Please response frends... Dont let me down :/
regards,
Piyush

When to use ABAP proxy?

currently we have MQ > XI > ECC 5.0(using RFC adapter which calls a BAPI)
the above scenario works sometimes, but other times the data is inconsistent. We are using BPM collection in XI and then transferring the order via RFC adapter.
I am wondering if we can use ABAP proxy and see if this method is more viable.
regards,
tony

Hi Tony,
>>>I am wondering if we can use ABAP proxy and see if this method is more viable.
Sure you can use proxies
if you are calling bapis and you don have sp14
then your server proxy will look very similar to
your RFC wrapper
Regards,
michal

Pros & Cons for consuming web services in ABAP using ABAP PROXY

Hi,
Other then performence is there any other disadvantages like security,etc for consuming web services in ABAP using ABAP proxy?
I really appreciate if some one provide the more details(Pros & Cons ) regarding cosuming web services and I also want to know is there any other way to consume web services in ABAP.
Thanks.

 is there any other way to consume web services in ABAP
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja

FTP to SAP using ABAP Proxy

Hi SDN,
I am new to XI can any one provide me clear documentation or link on "FTP to SAP using ABAP Proxy" on this senario. I mean the steps to create ABAP Proxy etc..
Thanks in Advance
Regards
Basha

Hi Shaik
Please go through the information provided in the blogs below which explains clearly the Scenario you want to try.
<a href="/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy Proxies in XI</a>
<a href="/people/siva.maranani/blog/2005/04/03/abap-server-proxies Server Proxies</a>
<a href="/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy to R/3 via ABAP Proxy</a>
Please do let me know if you want any more help regarding the same.
Regards,
Abhy

Output type using ABAP proxy

Hi All,
Is it possible to create an output type for delivery or invoice using ABAP proxy? If yes do we need to follow some special steps(apart from the usual setting we do for EDI or print outputs) to be followed for this?
Regards,
Sajith.

Hi Sajith Hari,
I am not aware about the ABAP option but you can certainly use NACE tcode and select V2 or V3 accordingly for deliveries or invoices>go to output types and create your desired output types.
regards,
US

Compatibility issue with developer 6i using (64 bit) OS

Hi All,
I am using oracle 9iR2 (32 bit) on Linux Red Hat (32 bit) with developer 6i. Now i want to upgrade OS Red Hat (64 bit) and migrate database 10gR2 (64 bit).Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
Thanks

Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
No, as long as developer 6i is at least patch 16. We use it.

Issues with pagination when using Adobe table with Web dynpro for ABAP

Hi All,
I am facing strange issue with table text.
I have three cols in table, one is of type Char255 and other two cols are of type string.
The text in the col 1 is displayed perfectly but in other two cols of type string whenever we have pagination the text in table is getting truncated and in next page new row starts.
Could you please tell me the settings that will enable flowing of text in the row of table to next page.
Thanks,
Arti.

Check the properties of the text field you use for those columns (if you want to control it on this level) or check the same attribute for the row subform (one level up control): "allow page break within content".
Regards Otto
p.s.: we all have deadlines... and manage to pay something back. Think about it.

Business partner replication using ABAP proxy

Hello,
I want to send vendor master data records from the MDM to SAP SRM. There is a standard ABAP proxy interface in the SRM for this purpose and this proxy is also being used by the standard PI content for MDM.
Do you have any experience with this interface? I have done some test cases and I missed the logging. In PI I don't get any feedback if the business partner has been created or not. And in case it was not, there is no detailed error description. Neither in SXMB_MONI in the PI nor in the SXMB_MONI in the SRM.
Is there any other monitoring tool for this interface?
Would you recommend to use this interface in production, or would you prefer to use the BAPI interface?
Any comment appreciated.
BR,
Jürgen

Hi Jürgen,
yes I worked on a similar scenario, we were distributing customers to CRM, which is the dual of vendors in SRM, and at the end is just a different role of the business partner.
The Proxy I used is the standard proxy ABABusinessPartner, which is part of the standard content, and we never had problem using this object (productive since more than a year).
What is strange to me is that you do not see any trace in SXMB_MONI, you should see the message in both XI and SRM and when a message is in error you should see the trace there with a description of the issue.
Regarding Acknowledgement I think you have to configure MDM to request an acknowledgement since the ack only comes back if the first sender of the message request it.
Hope this help.
Ciao,
Sergio

Problem with numeric types in Abap Proxy

Hello,
We are having problems with some abap proxy calls. When a numeric type is filled with 0 the node it´s automatically removed and no value it's recived in XI. The only way I have found to avoid this problem it's to define the field with type string or change the cardinality to 1..1 instead of 0..1. It's there any way to maintain the type and the cardinality?? Maybe with a pattern??
Regards,
Alberto Pla.

Hi Alberto
I had this problem, and I decided to use xsd:string instead of xsd:integer. This will solve the issue.
Anyway.. check this note:
[Note 1242795 - Mapping of XSD default values by ABAP Proxy Generation|https://service.sap.com/sap/support/notes/1242795]
Regards
Francesco

Unallowed RFC-XML Tag (SOAP_EINVALDOC) - Web Service using ABAP Proxy

Hi there
I am trying to consume a Web Service using ABAP Proxies. I have done the following in the system:
I configured the HTTP and HTTPS Proxy settings.
I created a package with package interfaces SAI_TOOLS and SAPPINT included under the Use Access tab.
I created the proxy classes by using the WSDL provided by the system I'm trying to interface with.
I created my HTTP destination RFC via SM59.
I configured a logical port for the proxy.
I developed the ABAP code for calling the proxy.
In the code the exception CX_AI_SYSTEM_FAULT gets raised with error message "Unallowed RFC-XML Tag (SOAP_EINVALDOC)" when I call the method for passing data to the destination system in the proxy class.
I had a look at SM21 and the following message was written in the log:
"SOAP Runtime: SOAP Runtime exception: 111 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)". I also looked at SAP Note 919886 which states that it can be dumps in the system, missing configuration or the path prefix of the RFC destination that is incorrect. I cannot find any ST22 entries. The trace file looks as follows:
SAP System ID: DGH
Client: 009
User: COLESKG
System time: 072910
System date: 20070531
SAP Release: 700
Host: hd307c
Operating system: AIX
DB System: ORACLE
Program: ZUK_IPA00003
Processing State: 0
Location: Client
Transport Binding: http://schemas.xmlsoap.org/soap/http
SOAP Application: urn:sap-com:soap:runtime:application:client
SOAP Runtime Protocol: http://www.sap.com/webas/630/soap
/runtime/protocol
SOAP Protocols: <initial>
Request Message: <initial>
Response Message: <initial>
Fault: <initial>
Registry: <initial>
SOAP Roles: <initial>
Trace Level: 3
Logging Level: 2
Monitoring Level: 0
Security Profile: <initial>
WS Security Protocol: <initial>
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to create client application for Proxyclass:
ZES_CO_PROCESS_EMPLOYEE_BATCH LP name: DEFAULT
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application created
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to initialize client application
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Try to initialize application
urn:sap-com:soap:runtime:application:client
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new runtime CL_SOAP_RUNTIME_CLIENT
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Try to register application
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Application registered
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Read type of transport binding from
configuration
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new transport binding type
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() Try to initialize
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() http://schemas.xmlsoap
.org/soap/http initialized
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Try to create request message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Request message created
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Try to create response message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Response message
created
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Try to initialize
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Check transport binding
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Create runtime protocol
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Runtime-intrinsic
Protocol as SENDER with Priority 5
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create trace header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Trace header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create logging header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Logging header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT()
Initialized
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Try to create instance for http://www.sap.com/webas/630/soap
/runtime/session/protocol::http://www.sap.com/webas/630/soap
/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Instance of CL_SOAP_SESSION_PROTOCOL created for http://www.sap.com/webas/630/soap/runtime/session/protocol::http://www.sap.com/webas/630/soap/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Session Protocol
as SENDER with Priority 5
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Try to configure features
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() Try to
create ICF Client for DESTINATION = ALSB
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() ICF
Client created by DESTINATION
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_DESTINATION_URL_PATH() Set
DESTINATION PATH = /SapHRSmartIntegrationWeb/processes/ProcessEmployeeBatch.jpd
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Features configured
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Application urn:sap-com:soap
:runtime:application:client initialized
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application initialized
Trace file opened at 20070531 073030 GMT SAP-REL 700,0,95
Error in module XMLParserGetNextElement:773
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfcpars.c#2 $
Unallowed RFC-XML Tag
Error in module XMLConverterReadTag:3061
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfccnvrt.c#5 $
Unallowed RFC-XML Tag(24)
Error in module ab_soap:4392
Id @(#) $Id: //bas/700_REL/src/krn/rfc/abxrfccal.c#2 $
failed with return code 1
It then must be something in the config. Has anyone got any idea why this message is encountered?
Kind Regards
Gustav Coleske
Message was edited by:
Gustav Coleske

Hi,
I have the same problem as described.
Can you give me a little more information about the error you have solved in the proxy.
Thanks for help
John

Issue with FM 'STATUS_CHANGE_EXTERN' using ABAP Proxy

Similar Messages

Maybe you are looking for