Issue with French characters and Variables combined.
Using Captivate 4 and publishing to SWF, I discovered the behaviour shown below.
You can see a text caption
The text of the first line in Captivate is 'Modifier les paramètres Word - $$v_ScoreParam$$/10'
When published the è is changed into a Chinese character.
Is this a known issue? Or am I doing something wrong?
Thanks for any clues.
Hello,
This is a known issue in Captivate 4 (there are several threads in this forum about it), and sorry, it has not been solved in CP4 but is no issue in CP5 (doesn't help you of course).
I had quite a lot of problems with this. The only workaround is putting this variable in a separate Text Caption and try to put it in place in the other Text Caption. Personally I avoided using those variables when expecting combination characters (like é, à ü...).
Lilybiri
Similar Messages
-
Issues with danish characters and sync
I am using a Nokia 5800, Nokia Ovi Suite 1.1 and synchronize through a cable from phone to PC.
I am using the Address Book from Outlook Express to synchonize between my Nokia phone and my PC. However, any special danish characters (æ, ø and å) are not correctly transferred from the phone to the PC, though the other way round does not cause any problems.
This is an issue when I set it up to synchronize both ways, as everytime I do this, all people in my Phone with either æ, ø or å in their name come in to my Outlook list as duplicates where the above-mentioned letters are replaced by some rubbish.
I assumed this was some language-settings but everywhere I can see my PC is set for danish and so is my phone.
What can I do to prevent this problem? Is there anywhere specific I have to change / modify some setting?Hi richard116,
The BlackBerry Desktop Software requires a one time connection to the internet when configuring synchronization. Its possible this could be being blocked due to a firewall or anti-virus software. The following article should help you diagnose the cause and then resolve the issue so you can setup synchronization. http://bbry.lv/mfgghx
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
Issue with escaping characters and php
Greetings,
We are working on a web page using php and Oracle. We have troubles dealing with the diferent escaping characters when inserting/retrieving data (magic quotes is on but adding the backslash doesn't help :( ).
We would like to know the correct way of dealing with those characters ( ' " / /n ...).
Thank you in advance,
Sincerely,
Oriol NonellDo NOT use addslashes/stripslashes to escape your queries. I use this function to do the escaping:
function escapeSQL($string, $wildcard=false)
$result = str_replace("'","''",$string);
if ($wildcard == true) $result = str_replace("%","%%",$result);
return $result;
It basically replaces ' with ''.
If you set $wildcard to false, then '%' is considered to be an actual '%' (for 'like' expressions). If you set it to true, a % is escaped to %% too. -
Issue with Information broadcasting and pre-cal server in SAP BI
Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
NarendraHi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra -
Issues with Office 2010 and Acrobat Pro 8
Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
ChompAcrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination. -
Web Logic 10.3 upgrade causes issues with escaped characters in JSP.
We recently upgraded our application servers from Weblogic 9.2 to Weblogic 10.3 and we are having an issue with escaped characters in a JSP code. Here is an example of what we are seeing:
var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
This code works in Weblogic 9.2. In Weblogic 10.3 we have to make the following changes:
var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
Thanks, TomHi:
I have resolved the issue with the following in the jspx page.
Put an
<jsp:scriptlet>
response.setContentType(“text/html; charset=UTF-8”);
</jsp:scriptlet>
Inside the <f:view> on the jspx file.
Please refer the link http://www.oracle.com/global/il/support/tip/nlss11061.html for more details. It is helpful.
Thanks & Regards
Sridhar Doki -
Continuing font encoding and tag issues with snow leopard and CS4oI
I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unresponsive to date. I need to be able to use Type 1 fonts and do the following , export a pdf from Indesign with the following attributes: 1) xml tags for stories and objects. 2) have the fonts encoded as ansi and embedded.
Some additional information - exporting to ps is not an option as it destroys the xml tags. and doesn't guarantee that the fonts won't become CID or some other odd encoding.
As it stands now,
Leopard (10.5.8) and CS3 creates ansi encoded fonts with xml tags.
Leopard (10.5.8) and CS4 creates ansi encoded fonts with xml tags.
Snow leopard and CS3 creates ansi encoded fonts and xml tags
Snow leopard and CS4 creates custom subsetted fonts and some xml tags.
If any one has any advice on how to force specific font encodings from CS4 pdf exports so that i can preserve the tags and get the correct fonts I would be grateful.The font encoding is not a function of the OS version, but rather of how a font is internally encoded and the content you are representing with the font.
If you are seeing a difference between MacOS 10.5 and 10.6 with the same Adobe software, it probably has something to do with use of a system font that is somehow different from one version of the OS to another. InDesign does not use any of the OS' font handling software.
Assuming that the fonts are embedded, subset or not, what is your issue with whether a font is ANSI-encoded, custom-encoded, or CID-encoded? It should make no difference for purposes of workflow beyond InDesign for software that adheres to the PDF specification (including all versions of PDF from 1.3 and up to 1.7 plus ISO 32000-1 PDF and all versions of PDF/X and PDF/A).
Neither InDesign or any other Adobe application provides user choices for the encoding since it shouldn't make a difference. The encodings chosen by Adobe's core technology components are for a combination of optimization and to support proper text search, copy, etc.
- Dov -
Problems with French Characters in Page Title
Here is the problem
When using Duplicate Page and trying to set page titles with french characters (or other non standard characters for that matter such as qoutes) The resulting output does not display correctly.
I thought a work around would be to us the HTML escape codes in the title dialog when creating the page however it appears that Incontext then goes and attemps to escape the ampersand part of the escape code during save.
so for instance when trying to set a page title such as Whistler Live! prépare la scène using the following escaped version
Whistler Live! prépare la scène
The resulting HTML saved from incontext looks like this
Whistler Live! pr&eacute;pare la sc&egrave;ne
and the title does not display correctly.
Incontext sees the & which is page of the HTML escape code and they automatically replaces that with &
How the heck can we set HTML Special characters in our page titles - any ideas?Hi Corey
To answer your questions I am on windows 7 IE 8 and also tried in firefox 3.6
backend is windows 2000 / IIS 6 / Coldfusion 8
I am able to enter the characters in the dialog box but during the save they are altered
I created a basic test page with nothing but the following code
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:ice="http://ns.adobe.com/incontextediting">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>test</title>
</head>
<body>
<div ice:editable="*" >
<p>Test test</p>
</div>
</div>
<script src="/includes/ice/ice.js" type="text/javascript"></script>
</body>
</html>
saved it as test-characters.cfm (coldfusion page) and tested it out
problem was still there however when I save the page as a .html file and test it out the problem is no longer present
So the problem seems to only occur when using .cfm pages (even if there is no cf code on them)
I am going to send you a private message with access to my test pages in case your inclined to take a look
Thanks for you help so far -
Issue with recursive join and filter records
I am having an issue with recursive join and filtering records for the following rules. The table, sample records, test script and rules are as below
drop table PC_COVKEY_PD;
create table PC_COVKEY_PD (
PC_COVKEY varchar(50),
COVERAGE_NUMBER varchar(3),
SEQUENCE_ALPHA varchar(3),
TRANSACTION_TYPE varchar(3),
COV_CHG_EFF_DATE date,
TIMESTAMP_ENTERED timestamp
delete from PC_COVKEY_PD;
commit;
Insert into PC_COVKEY_PD values ('10020335P8017MT0010012','001','001','02',to_date('01/FEB/2010','DD/MON/RRRR'),to_timestamp('02/JAN/2010 01:55:59.990216 AM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0050012','005','001','02',to_date('01/FEB/2010','DD/MON/RRRR'),to_timestamp('02/JAN/2010 01:56:00.268099 AM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0010032','001','003','03',to_date('14/JAN/2011','DD/MON/RRRR'),to_timestamp('14/JAN/2011 04:25:19.018217 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0010042','001','004','03',to_date('21/JAN/2011','DD/MON/RRRR'),to_timestamp('21/JAN/2011 04:00:31.719444 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0050022','005','002','03',to_date('21/JAN/2011','DD/MON/RRRR'),to_timestamp('21/JAN/2011 04:02:48.953594 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
commit;
--select * from PC_COVKEY_PD order by COV_CHG_EFF_DATE,TIMESTAMP_ENTERED;
PC_COVKEY COVERAGE_NUMBER SEQUENCE_ALPHA TRANSACTION_TYPE COV_CHG_EFF_DATE TIMESTAMP_ENTERED
10020335P8017MT0010012 001 001 02 01/FEB/2010 02/JAN/2010 01:55:59.990216 AM
10020335P8017MT0050012 005 001 02 01/FEB/2010 02/JAN/2010 01:56:00.268099 AM
10020335P8017MT0010032 001 003 03 14/JAN/2011 14/JAN/2011 04:25:19.018217 PM
10020335P8017MT0010042 001 004 03 21/JAN/2011 21/JAN/2011 04:00:31.719444 PM
10020335P8017MT0050022 005 002 03 21/JAN/2011 21/JAN/2011 04:02:48.953594 PM
*/Rule;
Every PC_COVKEY, query should recursively join and generate set of records depending on latest SEQUENCE_ALPHA for the coverage number at that point of time. For ex,
for 10020335P8017MT0010042 (4 row) should generate 2 records
1. 10020335P8017MT0010042001004 (PC_COVKEY || COVERAGE_NUMBER || latest SEQUENCE_ALPHA--004 for cover 001), SEQUENCE_ALPHA 001 for cover 001 is not the latest for 10020335P8017MT0010042.
2. 10020335P8017MT0010042005001 (coverage number 005, and latest sequence alpha-001 for cover 005).
SEQUENCE_ALPHA 002 for cover 005 is not the latest for 10020335P8017MT0010042 as it happened later stage.
for 10020335P8017MT0050022 (5 row) should generate 2 records as
1. 10020335P8017MT0050022001004 (PC_COVKEY || COVERAGE_NUMBER || latest SEQUENCE_ALPHA--004 for cover 001),
2. 10020335P8017MT0010042005002 (coverage number 005, and latest sequence alpha-002 for cover 005)
WITH SNAPSHOT_CVR_CTP as (
SELECT pcd1.PC_COVKEY,
pcd1.PC_COVKEY||pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA as cov_key,
pcd2.COVERAGE_NUMBER,
pcd2.SEQUENCE_ALPHA,
pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA as CVRSEQ,
max(pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA) over (partition by pcd1.PC_COVKEY, pcd1.COVERAGE_NUMBER
order by pcd2.COV_CHG_EFF_DATE, pcd2.TIMESTAMP_ENTERED) as MaxSeq,
pcd2.COV_CHG_EFF_DATE,
pcd2.TIMESTAMP_ENTERED
FROM
PC_COVKEY_PD pcd1,
PC_COVKEY_PD pcd2
select * from SNAPSHOT_CVR_CTP SC
WHERE sc.PC_COVKEY = '10020335P8017MT0010042' -- 4 row
--AND COVERAGE_NUMBER||SC.MAXSEQ = COVERAGE_NUMBER||SEQUENCE_ALPHA
ORDER BY TIMESTAMP_ENTERED
PC_COVKEY COV_KEY COVERAGE_NUMBER SEQUENCE_ALPHA CVRSEQ MAXSEQ COV_CHG_EFF_DATE TIMESTAMP_ENTERED
10020335P8017MT0010042 10020335P8017MT0010042001001 001 001 001001 001001 01/FEB/2010 02/JAN/2010 01:55:59.990216 AM
10020335P8017MT0010042 10020335P8017MT0010042005001 005 001 005001 005001 01/FEB/2010 02/JAN/2010 01:56:00.268099 AM
10020335P8017MT0010042 10020335P8017MT0010042001003 001 003 001003 005001 14/JAN/2011 14/JAN/2011 04:25:19.018217 PM
10020335P8017MT0010042 10020335P8017MT0010042001004 001 004 001004 005001 21/JAN/2011 21/JAN/2011 04:00:31.719444 PM
10020335P8017MT0010042 10020335P8017MT0010042005002 005 002 005002 005002 21/JAN/2011 21/JAN/2011 04:02:48.953594 PM
I am trying to filter row using MAXSEQ but at the moment MAXSEQ values are not coming as expected. I expect following value for COV_KEY combination
COV_KEY MAXSEQ
10020335P8017MT0010042001001 001004
10020335P8017MT0010042005001 005001 -- match
10020335P8017MT0010042001003 001004
10020335P8017MT0010042001004 001004 -- match
10020335P8017MT0010042005002 005001Would appreciate if anyone can get MAxSEQ as expected.Something like..
with dist_cov_numbers as
select distinct coverage_number cov_number
from PC_COVKEY_PD
all_data as
select pcd.*,d.cov_number new_coverage_number,
max(decode(coverage_number,d.cov_number,sequence_alpha))
over( partition by d.cov_number
order by COV_CHG_EFF_DATE,TIMESTAMP_ENTERED
) max_seq
from PC_COVKEY_PD pcd,dist_cov_numbers d
select pc_covkey,pc_covkey||new_coverage_number||max_seq new_key,
pc_covkey||coverage_number||sequence_alpha actual_key
from all_data
order by COV_CHG_EFF_DATE, TIMESTAMP_ENTERED;
PC_COVKEY NEW_KEY ACTUAL_KEY
10020335P8017MT0010012 10020335P8017MT0010012001001 10020335P8017MT0010012001001
10020335P8017MT0010012 10020335P8017MT0010012005 10020335P8017MT0010012001001
10020335P8017MT0050012 10020335P8017MT0050012001001 10020335P8017MT0050012005001
10020335P8017MT0050012 10020335P8017MT0050012005001 10020335P8017MT0050012005001
10020335P8017MT0010032 10020335P8017MT0010032001003 10020335P8017MT0010032001003
10020335P8017MT0010032 10020335P8017MT0010032005001 10020335P8017MT0010032001003
10020335P8017MT0010042 10020335P8017MT0010042005001 10020335P8017MT0010042001004
10020335P8017MT0010042 10020335P8017MT0010042001004 10020335P8017MT0010042001004
10020335P8017MT0050022 10020335P8017MT0050022005002 10020335P8017MT0050022005002
10020335P8017MT0050022 10020335P8017MT0050022001004 10020335P8017MT0050022005002
10 rows selected Edited by: jeneesh on Nov 22, 2012 10:54 AM -
Can my iMac be set to type with French characters?
Hello all! Can my iMac be set to type with French characters? If so, what is the path? And, is there a keyboard overlay to see where the French language characters are located on the keyboard? Thanks!
Hey Steve,
Thanks again for the thoughts... Unfortunately, the only characters that I can use keyboard shortcuts for French are the é, ç and the á (it's better than nothing).
Outside of that, I have to switch keyboard layouts. I know of the accent grave ( `e ) that's nextdoor to the number one key... But it don't work... my translator thinks it's a typo... because it takes up a whole characters worth of space instead of sharing the space with the actual letter (vowel), like the other accents.
So I need keyboard shortcuts for:
ê Ê Ë ë è È
Ô ô Ö ö
à À Û û
I use these letters just enough to make switching keyboards back and forth a little irksome. Since the two keyboards have pretty distinctively different layouts and then we have the position of the A and M keys and.. well... see where this could lead??? LOL
Thanks...
I appreciate your thoughts, as always...
Yvonne -
Issues with Exchange Account and Q10
Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
IanTo follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian -
Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?
That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS. -
I am having major issues with Logic 8 and want to reinstall.
I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one. -
My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
HT4527 Is there an issue with home sharing and windows 8?
Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.
Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.
Maybe you are looking for
-
How to Change Default User Directory without changing System Directory
Hi Everyone, I need to change default User Directory for my JDeveloper 11.1.1.0.2. Default User Directory = C:/JDeveloper/mywork Default System Directory = *<JDEV_HOME>/System* Now I Need to Change it to My Default User Directory = C:/Monty/JDev11g2/
-
How can I remove recent contacts from my Mac's 'Share Menu'?
I have a MacBook Pro and I noticed that when I want to share something it only shows me the recent messages of one person to share with. I don't talk to said person as often as any other so I'd like to know how to remove it from my share menu. Thanks
-
Somebody help me My Mac is lagging big and whenever I click on something it just goes to the spinning wheel of death I can't do anything I need help
-
0FI_AR_4 & SPECIFICALLY BWFI_AEDAT
Hi All, I have read so much about 0Fi_ar_4,but 1 doubt still prevails. A few information: 1.0Fi_ar_4 extractor in my project is still not minute based. 2.The extraction takes place after 2 GMT.Loading is always once a day. Confusion: I have understoo
-
Hi guys how do i find where the data is coming into 0FUND from R/3, to verify if the data is corrupted or not?