Issue with Fusion drive (Late 2012 iMac)

I have a late 2009 iMac that has been backed up with Time Machine.  I recently picked up a late 2012 iMac with the 1TB Fusion drive.  When I first plugged in my Time Machine drive, I was asked if I'd like to transfer my files over.  I did, and everything was working fine.  I was using about 800GB of my 1.12TB Fusion Drive.
I recently decided to add a new partition to the Macintosh HD in order to put Windows on it. I did this through the Disk Utility.  I noticed that it was taking an inordinately long time to create this partition.  Finally, I realized that the Disk Utility was locked up.  I was forced to reboot to fix it.
I went back and tried again and I got an error stating that the drive had errors and I couldn't make a new partition.  So I attempted to "repair disk".  That gave me an error "Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility."
So I rebooted into recovery.  Recovery was absolutely no help either.  It couldn't repair the drive, even though it had me erase all the data.  So I downloaded 10.8.2 on my Mac Mini and made a boot disk out of my Thunderbolt drive.  I booted into OS X and tried again to repair, thinking it would work since the Fusion was no longer the boot drive.  No such luck.  I then booted back into recovery and had recovery download and install a fresh version of 10.8.2.  2+ hours into the download/install, I get an error that says "OS X couldn't be installed because the disk Macintosh HD is damaged and can't be repaired."
Ok, so as a final attempt, I had recovery use my time machine to start over.  That worked, kinda.  It now shows my Fusion drive as being completely filled in Disk Utility (49KB remains, only about 800 or so was used before), and Finder shows the Fusion drive as being 860GB capacity with 837GB used.  I still can't repair the disk.  And now my Time Machine acts like I'm working on an entirely new computer and says there's not enough room on the drive unless I format my Time Machine drive and start over.
Yeah, TL;DR, but does anybody have any idea how I can get this issue resolved?  I wonder if doing the TM restore from my 2009 iMac may have introduced the non-Fusion version of Disk Utilities that doesn't know how to fix my issue.

Yes I have AppleCare.
Before that I've now made a bootable disk and tried to repair the internal drive, but this was not possible.
I have a Time Machine backup, but excluded some temporary folders.
Is there a way to access these folders in case they aren't in a damaged area?
Maybe using "Target Disk mode"?
I've never done this before.
This Mac has no FireWire, but we have an adaptor for Thunderbolt to FireWire - could I connect an older Mac with FireWire using this adaptor for Target Disk Mode?
Many thanks.

Similar Messages

  • Help for with slow, glitchy (late 2012) iMac

    This is an ANSWER and not a request for help.  I didn't know where to post this and apologize for stepping where I shouldn't. 
    I have a Late 2012 iMac that has been crashing, running slow, and now worse;  all my documents and everything in Finder have disappeared.  I discovered a fix that may help others with similar issues.  I use my iMac for use with Logic Pro X and Mainstage where freezeups are a disaster.  I thought about this awhile and realized I had installed a new USB 3.0 external hard disk a few months ago when this issue began. I began to experience more and more crashes and extremely slow performance.  Beach-balls and slow performance were common.  But the last straw was when everything in Finder disappeared.  My Document and Application folders were empty.  If I clicked on "About This Mac" I saw nothing.    It took two tries to prove my theory, but here's what I did to make "the fix".  I unplugged the USB 3.0 drive and all USB and external devices.  I did a restore of OSX Mt Lion.  All was back to normal.  But after plugging in the USB 3.0 drive, all the afore mentioned problems came back.  I did one more restore, this time NOT connecting the USB 3.0 external hard disk.  Now I have gone some time and my iMac's speed is back to "incredible", no beach balls or any sign of slow performance in recording or running any other app.  Apparently, the 2012 iMac; although spec'ed to be USB 3.0 compatible, may not be all that compatible. Hope this helps someone!

    Likely the external drive is bad or defective cable.

  • Can I install Windows on my iMac 27, 3TB Fusion Drive, late-2012 with Boot Camp 5?

    Hello. When I first opened the Boot Camp Assistant app, it said it could not work with the 3TB fusion drive. With the updated version of Boot Camp, the option to install Windows appeared. I tried to install Windows 8, but the loading bar stopped moving. I waited for hours, but it still did not move. I decided to quit the app, and re-open it, in order to try again. It crashed, and would not open. So I restarted my system and when I did that I noticed that I had about 1GB or so left of storage. This shocked me, because the disk was just suddenly filled for some reason. In hopes of fixing this I used an app called 'CleanMyMac' to try and recover the disk space. And as I thought the disk space returned to normal. However when I went to Disk Utility and clicked 'repair disk' it said this...
    There is only 1 partition, so the Boot Camp process did fail.
    I don't know whats wrong with my system though? I would like to install Windows, but I'm worried that I might recieve errors again. I have not got Apple Care, but I'm playing on buying it soon, due to it being almost a year since I bought the system.
    Maybe I did something wrong when trying to install Windows with Boot Camp? I don't know, but if possible can someone please tell me if I can install Windows and if something is wrong with my system.
    Here is some additional screen shots of the type of system I have.
    Thank you for your help with this issue!

    Which copy or version of Windows? and how where was it purchased?
    my window installed itself perfectly on another computer.
    One copy and you want to activate on two computers?
    With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s). 
    did you create 80GB or larger partition?
    also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
    OWC has up to 32GB, not cheap.
    http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
    Crucial is usally very helpful, try email cs.

  • Free Space Partition on Mac HD - 3TB Fusion Drive Late 2013 iMac

    I have managed to create a free space partition on my Mac HD that I now cant get rid of. This happened when I was trying to run bootcamp and during the Windows install I created a new partition that wiped the bootcamp partition and turned it into free space. Have attached a screen shot of my HD. I have already tried re-formatting the free space partition but nothing happens, just goes back to free space. Any help/ideas would be appreciated. Thanks!
    Late 2013 iMac-3TB Fusion drive

    Try highlighting the top space and there should be a arrow of sorts in the bottom right hand corner, like this.
    Click and hold on it and drag it down to take up the free space.
    If there is no 45º lines then you have separated that space from the Logical Storage Volume that makes up the Fusion drive and it can't be put back in without wiping out the Fusion drive and recreating it. At least no way that I know of.

  • Can I run parallels 8 on 3tb fusion drive on 2012 imac?

    Just trying to finalise order for new iMac but want to understand if there's a limitation on drive size when using Parallels to create a win7 environment...read stories of Bootcamp only working on 1TB drive but is this the case with Parallels?

    You posted in the iPad forum, by the way. Just FYI for future questions.
    Regards.

  • Need help installing windows with bootcamp on late 2012 iMac

    i just recieved my 27" imac a couple weeks ago ands i would like to install windows so i can get some gaming done on this imac. can anyone send me a link to a step by step guide on how to install it using a 8GB memeory stick since i dont have an optical drive.....i have already watched the youtube videos on using bootcamp but they all seem to be for older macs with an optical drive
    thanks in advance

    Be advised...  This will not work on the 3TB drives without a bit of hacking. 
    See this article: http://twocanoes.com/support/winclone/installing-windows-via-boot-camp-on-a-larg e-(2.2-tb-or-larger-)-drive-in-lion-(10.7)-and-later

  • [Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

    This is a copy of a post from my blog, you can also Read it on my blog...
    Introduction
    After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
    There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
    But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
    This guide may interest you if:
    You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
    You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
    What this guide will make you do:
    It will make you erase all your data from your external USB3/Thunderbolt hard drive
    It will make you install Windows on your external USB3/Thunderbolt hard drive
    It will make you install bootcamp drivers
    What this will not make you do:
    It will not make you modify anything on your internal Mac hard drive
    It will not make you use or install the bootcamp assistant
    It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
    What you'll need
    An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
    A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
    One of the following:
    Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
    A PC running Windows 7 or 8 → Read the important note below
    Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
    Download imagex.exe
    Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
    Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
    A USB stick to store your bootcamp drivers
    IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
    Step by Step guide
    Step 1: Get the install.wim file
    If you have a Windows ISO file:
    Mount the ISO
    If you're on OS X: double click on the ISO file
    If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
    If you're on Windows 8: double click on the ISO file
    Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
    Step 2: Clean, partition and format your external hard drive
    On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
    Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
    Type the following and hit enter to open the disk partitioner utility:
    diskpartType the following and hit enter to list your drives:
    list disk
    This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
    select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
    clean
    Create the boot parition by typing the following followed by the enter key:
    create partition primary size=350
    This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
    format fs=fat32 quick
    Set this partition to active by typing:
    active
    Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
    assign letter=b
    Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
    create partition primary
    Format the new partition in NTFS:
    format fs=ntfs quick
    Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
    assign letter=o
    Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
    exit
    Step 3: Deploy the Windows installation image
    Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
    Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
    imagex.exe /apply C:\wim\install.wim 1 o:
    This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
    o:\windows\system32\bcdboot o:\windows /f ALL /s b:
    If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
    If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
    Step 4: Boot from your external drive and install Windows
    Plug in your external drive:
    If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
    If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
    Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
    On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
    The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
    Step 5: Install bootcamp drivers
    Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
    Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
    Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

    Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

  • Disabling Fusion Drive and Installing Windows on SSD of Late 2012 iMac

    Hi, everyone.  After a two-year wait, I'm ready to buy my first iMac (was waiting for USB 3.0).  Before I get into my questions, I'll give you an overview of where I'm coming from so we can keep the discussion focused.
    My Usage
    I'm buying an Apple computer because it is the best-looking, quietist, and most powerful all-in-one computer I can find right now, but Windows is still my preferred operating system.  I've used OS X before – it looks great and I'm sure it works great for a large number of people, but it's not for me.  Windows works well and efficiently for me and I have thousands of dollars of design software for Windows.  I'm not interested in a virtualization solution because of my performance needs.  However, I do want to keep the OS X installation, if possible, for website testing and to play around with to learn the operating system better.
    What I Want
    I was attempting to buy the Late 2012 iMac last weekend, but it appears the BootCamp specifications and the Fusion Drive are currently limiting my usage needs.  I'm configuring the top model iMac with the i7-3770 processor, 24GB RAM (8 default + 16 from Crucial), GTX 680MX, and the 3TB Fusion Drive.  I don't actually want to use the Fusion Drive, though.  I want Windows 7 64-bit and OS X 10.8 installed on the 128GB SSD and to use the 3TB hard drive as storage for my music, videos, photos, and documents.
    My Questions
    1.  I've found a bunch of posts regarding installing Windows on the Fusion Drive, but they all seem to be about putting Windows on the slower 3TB hard drive portion and/or about trying to keep the Fusion setup after installing Windows.  Does anyone have a walk-through for a new Mac user on how to break the Fusion Drive configuration and install Windows 7 and preferably OS X on just the SSD?
    2.  I've seen a bunch of posts debating about whether Windows can be installed natively using EFI to bypass the BootCamp limitations.  Is this possible?  The 21.5" version is running EFI version 2.0, so I can only assume the 27" would too, but it's not been added on the Apple website yet (http://support.apple.com/kb/HT1237).  From what I understand, Windows requires at least version 2.0 to run in EFI mode.  Also, if I am able to get this method to work, will I still be able to install the Windows drivers from the OS X installation USB (or do they even come with USB drives anymore?)?
    3.  If I have to use BootCamp, I assume I will have to split the 3TB drive into 1TB and 2TB partitions for BootCamp to see it (so Windows can see it).  So I'd have Windows 7 and OS X on the SSD, and two storage partitions on the 3TB HDD that would show up as two drives for my files that both operating systems could access.  Is this assumption correct?
    4.  I've seen posts about OS X automatically trying to rebuild the Fusion Drive.  Let's say I'm able to get Windows installed on the SSD.  Will OS X, or future updates to it, ruin my Windows installation?  I would hate to do all this work and then have an Apple update corrupt everything.
    I know this is a long post, but I don't want to spend over $3,000 until I can be sure I can make it work for me.  Thanks to anyone who can help!
    iMac, Windows 7

    First, an advice: Boot Camp isn't compatible with 3 TB hard disks and Fusion Drive. For 3 TB hard disks, there's a workaround, but it doesn't work on a 3 TB Fusion Drive, so you won't be able to install Windows until Apple fixes this, so my advice is to wait until Apple launches OS X 10.8.3 or buy the iMac with a 1 or 2 TB hard disk and an external disk.
    1. The SSD is used automatically by OS X to store the applications and data you most use, but Windows can't use it, and there's no workaround for this.
    2. You can try to install Windows 8 in EFI mode, but I don't guarantee that it works. I tried it on my iMac and I started getting BSODs after some startups. Also, Macs don't use UEFI 2.0 (Macs use EFI 1.x), so you can't use Windows 8 advanced features such as Secure Boot. For Windows 7, you can't install it in EFI mode (it requires UEFI 2.0 or later)
    3. Fusion Drive only allows you to have two volumes, and with Boot Camp, you can only have two volumes on your computer: one for OS X and the other one for Windows. That's because Boot Camp emulates a BIOS to make Windows run (although it isn't neccesary in Windows 8, if Apple would want).
    4. First, you can't install Windows on the SSD. Then, OS X shouldn't ruin Windows because each operating system have got its space

  • What model # of 3 tb non fusion hard drive in late 2012 imac

    What Model # of Hard drive is Apple using for the 3 tb non fusion late 2012 imac.  27"
    If you have one, can you tell me what drive you have?
    Thanks

    polygoon wrote:
    <...>
    On the very first boot, I was confronted with a flashing prohibitory symbol and nothing more. My only option was to perform an online system restore. This seemed to work and I figured the machine shipped without OS X installed, as strange as that seemed.
    <...>
    I think that paragraph (actually, the first sentence) says it all.  I would have returned the system at that point.  By attempting to repair it yourself you may have caused further problems and certainly let Apple off of the hook for a bad system.
    My system specs are the same as yours. 
    3.4 GHz i7
    3TB Fusion Drive
    32GB 1600 MHz DDR3
    GeForce GTX 680MX 2048MB
    OS X 10.8.2 (12C2037)
    I have just over 1TB of my 3TB used up.  I just ran the test and received the following results.  Note that this is not the best test, just a typical one.
    Also my storage shows a total of 3.11 TB where yours shows 3 TB:
    And my Serial-ATA item shows the SSD where yours does not:
    So I'd say it is time for a visit to Apple.  Of course, you could try Apple phone support first if you think they could solve it over the phone.  However, as it failed with the first boot (the OS is shipped on the flash) in a way that suggested a valid OS wasn't found, I suspect something is wrong with the flash hardware and a phone call won't solve it.

  • Speeding up my iMac late 2012 iMac with external Thunderbolt SSD

    I am a motion graphics editor and would like to get better speed from my late 2012 iMac with a 3 TB Fusion Drive.
    I have three questions:
    1. Does the Fusion drive in this iMac always run the iOS and apps on the ssd part of the fusion drive?
    2. If not, is there a way to make that happen?
    3. If I add an External Thunderbolt 512GB SSD Drive, will I get a significant boost in performance by keeping the files (video and images) on the SSD, or would After Effects need to reside on the new SSD as well?
    I would really appreciate help from anyone that has the expertise to answer this question.
    Thank you.
    Will H.

    Hi there ScharadL,
    I would recommend taking a look at the troubleshooting steps boot issues found in the article below. 
    Mac OS X: Gray screen appears during startup
    -Griff W.

  • 27" (Late 2012) iMac won't boot from any external drives.

    I just got my 27" iMac (late 2012) with Fusion Drive. I can't get it to boot off any my external LaCie drive. I just get an "Ø" symbol. tried this so far:
    Ensured the OS on my external drive is 10.8.2 - didn't help.
    Updated (reinstalled) Mountain Lion on the external drive, using the Recovery HD that comes with the iMac, just in case it's a "special verision". - didn't help.
    Connected via Thunderbolt-to-FireWire 800 adaptor - didn't help.
    Connected via USB2 port on HDD to USB3 port on iMac - didn't help.
    Used "Startup Disk" system prefs - didn't help.
    Used "hold doen ALT key" after startup chime. Can see the drive but - didn't help.
    So - has anyone had any luck booting a new iMac off an external device at all?
    I might try a Carbon Copy Clone of the Fusion Drive - but I'm thinking it's a waste of time - instinct tells me it's a Firmware limitationin the machine that prevents booting from externals.

    trying a clone after all due to this discussion https://discussions.apple.com/message/20938457#20938457

  • I have a late 2012 iMac running osx 10.8.5.  I keep losing access to my internal hard drive.  I can reboot and regain access and it will last for a few minutes or hours.  Disk utility does not seems to help.

    I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive.  I keep losing access to the internal hard drive/startup disk.
    I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive.  The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal.  Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing).  It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

    You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

  • I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India. Once i am back to India, will my iMac be covered by the Apple's Protection Plan?

    I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India and the option of configuring to my need is not avaialble here in India. My concern is once i am back to India, will my iMac be covered by the Apple's Protection Plan if something goes wrong here in India?
    I recently came across some posts regarding International warranty related issues for iPhone and iPad....hence this crossed my mind...
    Waiting for response from the support group members...

    Thanks Ralph
    This essentially means that if my iMac develops some problem (both software and hardware) in my country (India), it will be completeley attended (even the whole system requires replacement) by the AASP in India...is that what you say?

  • Installing Adobe Creative Suite - NEW 21" late 2012 iMac - Don't want to buy superdrive!! How can I trick the computer into thinking the USB drive is a CD?

    I've got a new late 2012 imac, but I realize yes it doesn't come with a compact disc drive. I have an Adobe Creative Suite CS5.5 install disc with all the information included (serial). I copied the contents of the CD into a USB Flash drive, but I can't get it to install because it is looking for the content on the CD. Since I don't want to have to buy the external Superdrive!! How do I convince the computer into installing adobe via the files on the flash drive?

    Your question makes perfect sense to me. I would contact Adobe Supptrt Services from the contacts listed here:
    http://helpx.adobe.com/creative-suite/kb/install-creative-suite-5-cs5.html
    You will need adobe current serial number.
    I hope you'll post here with your results. I've interested know what happens.

  • Fusion Drive option for iMac 21.5" late 2013

    Fusion Drive option for iMac 21.5" late 2013 will upgrade main SATA HDD to 7200rpm model? Or just add SSD to standart 5400 rpm HDD for 21.5"?
    Thank you for your attention.

    You can't add an internal drive, but you can add as much storage as you want via Thunderbolt.

Maybe you are looking for