Issue with G4 connecting to a Windows File Share

We have a single MAC G4 that our marketing department uses for graphic development. when we first setup the PC we were able to connect to our Windows shares on the network. For better than a year now we have had intermittent problems with connecting to our Windows file share. It would drop the TCP connection to the file share, you would need to go back a re-authenicate to the share. Two weeks ago the problem worsened, we can't connect the to Windows files share at all now. I have tried different users accounts including my own which has domain admin authority. However I have a samba file share and a snap server running on the network and I am able to connect to these machines with no issues. I suspect a configuration problem, but not sure where to look next.
The MAC is running the following OS version and Kernel
OS 10.3.9 (7W98)
Kernel Darwin 7.9.0
Any guidance would be appreciated

I just figured it out myself.

Similar Messages

  • Unable to Connect to Windows File Shares

    Steps I take to attempt to connect to a Windows File Share within the office. Being relatively new to the Mac, I am curious on why I am not able to connect to Windows File Shares.
    1. Command-K
    2. Server Address: smb://[server-hostname]/[sharename]
    3. Click Connect
    4. Connecting To Server..... (takes a short amount of time)
    5. SMB/CIFS File System Authentication
    - I then enter the domain, username and password
    6. Click OK
    7. Error: Could not connect to the server because the name or password is not correct.
    What gives? I have confirmed and validated server hostname, sharename, appropriate persmissions for windows account, etc. I have tried IP Address instead of hostname, same outcome.
    Any Ideas?
    MacBook Pro 17"   Mac OS X (10.4.8)  

    Hi Arus, not really a Windows® expert, but I think I've seen were putting the Domain name in there fixed it, but I can't find the exact way to do it, this is the closest I could find...
    "If I try to connect to smb://domain, that's when I can authenticate. If I try smb://machine/share, I still get the error -43."
    http://discussions.apple.com/thread.jspa?messageID=4727809&#4727809

  • Windows file share, finder issues

    Hello-
    At my work we have a Windows 2008 R2 file share that our mac computers connect to. all of the mac computers have snow leopard running on them. A few times a week finder either stops responding and crashes, or cannot connect to the file share. Once the machine is restarted, it works fine for a little while. This seems to be a never ending cycle. Is there anything I can do to make the performance better on a Mac connecting to a windows file share?
    Thanks
    Ryan

    Hi,
    the problem was the passwort. Using "?, %" or other special characters interpreted in a URL may not be used.
    After changing password to a alphanumeric everything works just fine.

  • Directory Caching issue with Cisco Jabber client for Windows

    Hi ,
    I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
    Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
    Is there any automated way to remove the cache file? 
    Here is the detail of CUCM,Presence and Jabber.
    CUCM version: 9.1.x
    Presence          : 9.1.X
    Jabber              : 10.5 and 10.6

    Hello
    On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
    Network Device Enrollment Service.
    Our certificate for the CUPS were generated on this Certification Authority too.
    I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
    Enterprise Trust store for the users.
    But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
    I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
    Our partner left us alone with that unfortunately.
    Florent
    EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

  • Issues with WiFi connection to Deskjet 3545

    Hi,
    I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
    1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
    2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer,  so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
    3.  Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
    All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

    Hi @DmiBro,
    Welcome to the HP Forums!
    I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
    I would recommend the following guides:
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
    HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
    Hope this information is helpful, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Issues with my connection when gaming (Insurgency)

    Hello,
    I just bought the MSI GT72 2QE. I am very pleased with de specs like the Geforce GTX 980m and the i4710hq but there is an issue that is bothering me some days now. When i am playing my beloved game Insurgency, i get ping spikes all the time. So i followed up some instruction on uninstalling the Killer software suite and just installing the drivers when i encountered the next problem. My Killer Wireless-n/a/ac 1525 Wireless Network Adapter couldn't find the drivers in the 'drivers only' package. But i did my best to find other drivers and accomplished after 5 hours full of frustration. So that is done but still doesn't solve my problem.
    I don't know what to do anymore and I'm starting to think that maybe my Killer Wireless-n/a/ac 1525 Wireless Network Adapter is the issue. Maybe this is a hardware issue. I contacted the store where i bought it and they will contact me in 48 hours with a possible solution but the guy said that after all my effort it seems like a hardware issue indeed. You guys are my last hope or my laptop will be gone for 3 weeks at the factory.
    Video of ping:
    nl.tinypic.com/r/ztisd1/8
    I hope someone has the solution.
    Excuse me for my incorrect English, it's not my native language.
    Bye!

    Thanks for your reply.
    I'm glad (and I'm not glad for the others..) that I'm not the only one. But it's not because there are more devices connected to my router because I am the only one now and I'm still having this problem while my other laptop doesn't have any problems at all. I've tried everything so far now. Resetting my router, restarting my router, reinstalled windows, reinstalled drivers, got rid of the software suite, turned off firewalls, virusscanners etc. Everything.
    I thought it was only with Insurgency but it's also bugging me with Battlefield 4.
    So i have tried and done everything i could find on every forum on the internet. Still I don't get the download/upload/connection I am used to when using wireless. When i am in my room, which is 10m away from the wireless router, my download speed is max 1200 kb/s where I would easily get 2300 kb/s. Also when playing online games I am having big issues with my latency/ping. It goes from 60 to 200 to 400 and back every 15/20 seconds. I also own a Asus laptop and I don't have any issues at all with the wireless connection. When I am in my room there are no problems at all. I am starting to think that the Killer Wireless adapter is just a f*cked up thing. I bought a laptop (GT72 with 980m) for €2300 but I am having all these issues with the connection. It makes me really frustrated.
    Longer vid of ingame netgraph:
    nl.tinypic.com/r/97mjae/8
    I am hoping that there is something that solves my issues. I'm starting to think that another wireless network adapter from another brand is the only option. Is there an option to change the wireless network adapter on my laptop because I will if I can. This piece of sh*t needs to be replaced.
    Bye

  • Issues with ODI connection to Hyperion Financial Management

    Hi,
    I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
    The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 38, in ?
    com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
    at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
    When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
    Thanks,
    Su

    You will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
    Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
    Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
    Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
    geeo

  • My itunes account shuts down for no reason.  It wont recognize my iphone and there is an issue with network connectivity and itunes.  I have already  reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done.  Ideas??

    My itunes account on windows xp shuts down for no reason.  If even try to delete something from my library it shuts down.   It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store.  I have already  reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done.  Ideas??

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • Are there any issues with itunes where as certain windows looks like a PC in safe mode?

    are there any issues with itunes where as certain windows looks like a PC in safe mode?

    Check your trash. I had some old uninstalled files in there. Deleted and restated itunes. seems to work.

  • Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
    Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
    These little tweaks are the only thing I HATE about upgrading my OS.

  • I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
    What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

  • Issue with addPartialTarget method (Pop-up window)

    Hi, I am facing an issue with addPartialTarget method (pop-up window case). Please refer the thread Re: popup dialog problem
    If we are using addPartialTarget method, should the managed bean be in session scope? I've set it is in request scope. It works fine with 1 user. But if we test with more than 1 user using HP mercury load runner, it is failing and giving the following exception related to partial target. What should be the solution for this issue? This is very urgent. Even after setting the managed bean in session scope, I am getting the same error as shown below:
    java.lang.ArrayIndexOutOfBoundsException: -1
    at java.util.ArrayList.get(Unknown Source)
    at oracle.adfinternal.view.faces.renderkit.core.ppr.PPRResponseWriter._popPartialTarget(PPRResponseWriter.java:223)
    at oracle.adfinternal.view.faces.renderkit.core.ppr.PPRResponseWriter.endElement(PPRResponseWriter.java:138)
    at oracle.adfinternal.view.faces.ui.ElementRenderer.postrender(ElementRenderer.java:81)
    at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.postrender(XhtmlLafRenderer.java:225)
    at oracle.adfinternal.view.faces.ui.BaseRenderer.render(BaseRenderer.java:83)
    at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.render(XhtmlLafRenderer.java:69)
    at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:346)
    at oracle.adfinternal.view.faces.ui.BaseUINode.render(BaseUINode.java:301)
    at oracle.adfinternal.view.faces.ui.composite.UINodeRenderer.renderWithNode(UINodeRenderer.java:90)
    at oracle.adfinternal.view.faces.ui.composite.UINodeRenderer.render(UINodeRenderer.java:36)
    at oracle.adfinternal.view.faces.uinode.UIXComponentUINode.renderInternal(UIXComponentUINode.java:177)
    at oracle.adfinternal.view.faces.uinode.UINodeRendererBase.encodeEnd(UINodeRendererBase.java:53)
    at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
    at oracle.adfinternal.view.faces.renderkit.RenderUtils.encodeRecursive(RenderUtils.java:54)
    at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:242)
    at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeAllChildren(CoreRenderer.java:265)
    at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.renderContent(PanelPartialRootRenderer.java:65)
    at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.renderContent(BodyRenderer.java:117)
    at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.encodeAll(PanelPartialRootRenderer.java:102)
    at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.encodeAll(BodyRenderer.java:60)
    at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.delegateRenderer(CoreRenderer.java:281)
    at oracle.adfinternal.view.faces.renderkit.core.xhtml.DocumentRenderer.encodeAll(DocumentRenderer.java:60)
    at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
    at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
    at javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:645)
    at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:568)
    at oracle.adf.view.faces.webapp.UIXComponentTag.doEndTag(UIXComponentTag.java:100)
    at app.App__cusadd_jspx._jspService(_App__cusadd_jspx.java:3274)
    at com.orionserverhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:287)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
    at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
    at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
    at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
    at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
    at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
    at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
    at oracle.webcache.adf.filter.PageCachingFilter.doFilter(PageCachingFilter.java:274)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
    at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
    at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
    at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermindhttp://Oracle Containers for J2EE 10g (10.1.3.3.0) .util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Unknown Source)

    duplicate
    Frank

  • I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITun

    I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITunes is corrupted or is not installed correctly.  Please reinstall Itunes"
    iMac, iOS 6

    HI,
    If your old version of iTunes is still working - then I sugest you stick with that.
    iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
    Just a friendly advise and warning :-)

  • TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

    After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
    It works fine in LTE network. The problem is with WIFI only.
    Thank you.

    Hey Siddh.s!
    Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Windows file share - temp files

    We are currently migrating from Panther Server to Leopard Server.
    Mac file server is all working fine and users are happy.
    We have 2 PC's in the office who will also work from the file server. During testing I noticed that temporary files were being created by the Windows machines. Normally I would expect these temp files to disappear once the PC application had been closed on the client computer. Unfortunately this is not the case here.
    One of the main issues with this is that the temp files are the same file size as the original file. Obviously if this problem is left unchecked I could be left with 100's of MB of temp files all over the place.
    On a file called 'test save.doc', having been opened in Word, amended and saved I would end up with the following files.
    ~$st save
    ~WRD0000.tmp
    ~WRD0001.tmp
    test save
    If anyone can suggest some solutions it would be greatly appreciated.

    Just to add to the fine advice so far, sometimes just toggling the View to Column View or whatever it isn't the back will update it.
    Wonder if this works in Tiger...
    http://www.versiontracker.com/dyn/moreinfo/macosx/24356

Maybe you are looking for