Issue with goods receipt

Hi, after completing the PO when I am trying to post GR...finally I am getting an error...
Posting only possible in periods 2008/06 and 2008/05 in company code 1110
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed. Copied from M8022
Does this have anything to do with OMSY...how do I fix it...
Thanks...

Hi
as per youe reply, your current period is not 10 2007, you can check your current period again in MMRV.
If you have to reset to current period, you have to use transaction MMPI also need to follow OSS note 487381 to understand implications.
regards
Srinivas

Similar Messages

  • Goods issue and goods receipt with bar code

    hi
    i need  to do goods issue and goods receipt using bar code
    using se 73 i craeted a bar code
    iwill print this bar code on external system
    after printing same one will be stikked to  the respective bins
    i need to trigger goods issue and goods recipt by reading
    barcode scanner
    plz suggest how to achive this
    regards
    sasikanth
    vst

    One of the ways of triggering transactions in SAP using external systems is IDOCs
    When the barcode scanner scans the barcode of the material, you can trigger the IDOC from that system which will send the material barcode, number of units, goods issue/goods receipt etc to your SAP system. Once that inbound IDOC is received in SAP, SAP will trigger the goods issue or goods receipt based on the kind of transaction.
    If you can give the idea of IDOCs to your technical guy, he should be able to enable the solution. You may have to configure an IDOC in your SAP system, using teh standard IDOC type/message types meant for GI/GR
    Hope this helps you

  • Price change for material with Goods Receipt with out Order reference?

    hi all,
    Our client company have some finished products produced from raw materials. But we are not using Production planning module. So in MM we are receiving these products with Goods receipt with out order reference(521).
    The issue is, the price for this product will change monthly. This new price will affect the existing stock as moving average price calculation.
    ex:
                                     Quantity             Price             Value
    Stock balanace        100To                 2.00/To         200 
    Newly produced      100To                 2.20/To         220   
    after the GRN for newly produced is done. The price also need to change as below.
    Total                         200To                 2.10/To         420
    This is easy if we receive goods with PO price, as moving average price will updae in the master record.
    But here no reference. So only quantity updated with existing price. 
    So how to achieve the change of price ? Please help.
    Thanks,
    Aravind

    Hi Bijay,
    Thanks for the reply. I will use the posting method suggested by you.
    but how you are arriving  newly produced material quantity & price!
    The reply for your comment is,
    Every month My client company revise the price of the produced material based on various factors including the
    raw material purchase cost.
    The price will be fixed for the whole month.
    While posting the GRN, the accounts updated are,
    Dr  Material account
    Cr Production Cost
    Please let me know what you have asked is answered or not.
    So that i can brief more. This is my initial project. So your feedback is very helpful to me.
    Thanks,
    Aravind

  • Why decimal Places are allowed during goods issue and Goods receipt for mat

    Why decimal Places are allowed during goods issue and Goods receipt for material with unit of measure PCS.
    MY config allows consumption in decimal places.
    How to restrict this?
    Prem Nivas

    Hi,
    Please check in customizing UOM (T code-CUNI).
    In dimensions check the decimal point for the unit of measurement.
    Regards,
    Krishnendu.

  • Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

    Hello,
    I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
    I appreciate any help.
    Regards,
    Hector

    Hi,
    ME2N - In selection screen, enter Selection parameters as
    WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
    OR use RECHNUNG i.e. Open invoices and execute the report
    OR Use MB5S - GR/IR Balances

  • Report with goods receipt value and invoice posting value

    Is there any standard report with goods receipt value and invoice value (the value with which invoice is posted.

    Hi
    Please check MC$4 transaction, mey be helpful.
    regards
    Srinivas

  • SUS POs update with Goods Receipts and Invoices Information

    Hi SRM Experts,
    We have a SRM - SUS - R/3 landscape.
    1. We create POs in SRM (extended classic scenario) and transfer them to R/3 (via RFC) and to SUS (via XI – Interfaces PurchaseOrderRequest_Out and PurchaseOrderChangeRequest_Out).
    2. We post Goods Receipts into SRM (or alternatively into R/3).
    3. We post Invoices into R/3.
    Is it possible to update SUS POs with Goods Receipts and Invoices Information?
    If yes, what do we have to do to update this information into SUS POs?
    Thank you very much and kind regards,
    Marco.

    Hi Marco,
    you want to update SUS POs with GR / IV data?
    In a SUS environment each document counts as an own document and needs to
    be customized. I am not sure about understanding your requirement.
    Using the SUS-MM scenario in a classic environment enables the exchange of
    documents for PO / GR / IV in a "ping-pong" mode. SUS always needs a document,
    on which the next action can be based on.
    Thanks,
    Claudia

  • Invoice Receipt different with Goods Receipt

    Hi All
    I want to Enter Invoice difference amount with Goods Receipt.
    Example:
    95%Goods Receipt<Invoice< 105%Goods Receipt:  You can post Enter Invoice
    95% Goods Receipt > Invoice or
    105% Goods Receipt < Invoice:    System will lock Invoice.
    Could you please tell me how to configure.
    Thank and Best regards,

    Spro-MM-Logistics invoice verifcation- incoming Invoice - invoice block--set tolerence limit.
    rewgards

  • Issue in Goods Receipt with respect to Inbound Delivery

    Hi Gurus,
    We have a scenario where goods receipt (Migo) is done based on inbound delivery.
    i have created a PO for 10 Qty..
    i have done inbound delivery for 10 qty
    In actual GR (MIGO) only 8 qty is received and i posted it. whether the actual qty received will be updated in inbound delivery.
    please note GR will also be done in EWM.
    Please let me know if any standard config is required.

    Hi Vatcan,
    Chek the Inbound Delivery 1st weather you refer the right PO in it
    You can also chek in  PO i
    1 Me23n Go to confirmation tab here you can see the  Inbound delivery  quantity
    2 Chek  which reference document you recived the goods,  (i.e You recived the goods with reference to PO or  Inbound delivery)
    2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
    And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

  • Any standard IDOC  for Goods Issue and Goods Receipt ?

    Hi ALE/IDOC Experts,
    Seeking the experts advise on the following questions.could someone help us please..
    1. We are in need to post an IDOC which should do a Goods Receipt against the open PO - We are struggling to identify the right IDOC and its process code - Do we have any IDOC for that?
    2. We have to do a Goods Issue by posting an IDOC.Please help me in finding out the right IDOC (with Process code) for GI posting.
    We also have a plan to use ORDERS05 IDOC for GI posting by writing the customized process code (considering the future use of ORDERS05 to create SO). You could throw some light on this if possible.
    Thanks in advance,
    RGds,Vasanth.

    Hello Gajendra,
    Thanks for the timely input.I am thinking why not use ORDERS05 idoc and to have a custom code for that to do both GR/GI posting.Taking into account of future use of ORDERS05 in mind.
    I know for sure we can do that for GI.would it be possible to do the same for GR too
    If you can provide your suggestions on this that would be useful as you have already done that.
    Thanks in advance.
    RGds,Vasanth.

  • Proof of Delivery issue VLPOD: Goods receipt.

    Hi Friends,
    We have implemented EHP 6 with in (ECC 6.0)
    I am facing an issue where  we have done Goods issue for 10 pcs. In good receipt through VLPOD we have got only 8 pcs, as 2 pieces got lost in transit. Billing and vendor invoice receipt complete after that for 8, which is OK so far.
    Situation: After 2 months we have found those 2 parts in receiving side, so how do we do goods receipt for these 2 pcs as SAP is not allowing me to create VLPOD for the same delivery again. How to handle this situation. How to bring these 2 pcs in the receiving plant?
    Appreciate your answers
    Regards,
    Raj

    Hi,
    May be the link will be helpful
    VLPODF - how to use report for more sales organisations
    Regards,
    Saju.S

  • Third party credit update with goods receipt

    Hi Experts,
    I need to know how customize the credit control management in the following situation:
    In third party flow without SD delivery: Sales Order -> Purchase requisition -> Purchase
    Order ->Goods Receips from supplier.
    The credit control has to be done with the delivered amount not
    invoiced. But in this flow the SD delivery is substitue by MM Goods
    Receipt in order to deliver products to the customers. When goods
    receipt is done the delivered credit amount isn't updated.
    it's necessary to check the amount delivered not the amount ordered (as it's done with the current customization)
    The customizing is:
    the item category:
    billing relevance 'B': Relevant for order-related billing - status
    acc.to order qty
    o Copying control -> invoiced quantity indicator 'E': Goods receipt
    quantity less invoiced quantity
    Schedule type: u2018CSu2019
    Credit control area update group: 00012
    Automatic control check : 'D', flag in open deliveries.
    We have checked note 410685 but not solution has been found.
    Example: Customer has a credit limit 1000 euros.
    1) Create a sales order with an total amount 900  euros.
    2) Create purchase order with the purchase requisition created
    automatically by the sales order and release it.
    3) Do goods receipt for an total amount 800.
    4) Create another sales order with a total amount 150 euros.
    Now, the new sales order is blocked, because the calculated credit is
    100 (credit limit - ordered amount). If the credit is calculated with
    the delivered quantity, the credit will be 200 and the new sales order
    won't be blocked.
    Thanks in advance,
    Laura

    Hi Nagesh,
    In any credit memo scenario, always enable the creation of Credit Memo Request and then Credit memo. When the credit memo request is to be created, make sure that it is always created with reference to the invoice document only and not reference to the sales order, as the objective of Credit memo is to correct the prices in the invoice document. This will help you in various scenarios like exchange rate where the value of sales order and the value of invoice can be different in the local currency due to ex.rate fluctuations.
    As credit memo takes care of incorrect prices, having a document flow of credit memo request with reference to sales order is incorrect.
    With reference to the error message, it is a valid message as an invoice has been created with reference to the order. You should not create a credit memo with reference to a sales order(OR), for credit memo, u shd use a credit memo request only as the reference.
    Hence the flow for your question is
    Sales order>Invoice>Credit Memo req-->Credit Memo
    OR>F2>G2W(Confirm with others on the doc type)-->G2S
    Pls lemme know if you need further clarifications in this topic.

  • Purchase Order with Goods Receipts Query

    Hi Guys,
    Am still getting to grips with JOINS, I am trying to get a query completed that will show all Purchase Orders that have outstanding items on them, but I would like to also show any corresponding Goods Reciept Notes for that Purchase Order, showing the individual lines with outstanding balances. Here is what I have so far:
    SELECT DISTINCT T0.[CardCode] as [BP Code], T0.[CardName] as [BP Name], T0.[DocNum] as [PO Number], T0.[DocDate]as [PO Date], T1.[ItemCode] as [Stock Item], T1.[Quantity], T1.[OpenQty], T2.[DocNum] as [Goods Receipt No], T2.[DocDate]as [GR Date], T3.[ItemCode] as {Stock Item], T3.[Quantity], T3.[OpenQty] as [Left to Deliver]
    FROM OPOR T0  INNER JOIN POR1 T1 ON T0.DocEntry = T1.DocEntry, OPDN T2 INNER JOIN PDN1 T3 ON T2.DocEntry = T3.DocEntry
    WHERE T0.[DocDate]  >=[%0] AND  T0.[DocDate] <=[%1] AND  T0.[CardName] =[%2]
    I do only want to show the BP once for a given PO (hence my attempt at the DISTINCT command). Could someone be so kind as to point me in the right direction as I will want to turn this into a Crystal Report as well.
    Many thanks in advance
    Sean Martin

    I have double checked your query logic. It can not hold true. Here is the right logic:
    SELECT T0.[CardCode] as [BP Code], T0.[CardName] as [BP Name],
    T0.[DocNum] as [PO Number], T1.[ItemCode] as [Stock Item],
    T1.[Quantity], T1.[OpenQty],
    SUM(isnull(T3.[Quantity],0)) as 'Received Qty',
    T1.[Quantity]-SUM(isnull(T3.[Quantity],0)) as [Left to Deliver]
    FROM dbo.OPOR T0 
    INNER JOIN dbo.POR1 T1 ON T0.DocEntry = T1.DocEntry
    LEFT JOIN dbo.PDN1 T3 ON T3.BaseEntry = T0.DocEntry AND T3.BaseLine = T1.Linenum
    LEFT JOIN dbo.OPDN T2 ON T2.DocEntry = T3.DocEntry
    WHERE T0.[DocDate]  >=[%0] AND T0.[DocDate] <=[%1] AND T0.[CardName] =[%2]
    GROUP BY T0.[CardCode], T0.[CardName], T0.[DocNum], T1.[ItemCode],
    T1.[Quantity], T1.[OpenQty]
    The column 'Left to Deliver' should be identical to 'Remaining Open Qty'
    Thanks,
    Gordon

  • Value of inventory after Goods Issue, before Goods Receipt for open order

    Dear Experts,
    Raw materials R72 and R82 are required to produce Semifinished Product S10.
    Semifinished product S10 is required to produce Fnished product F20
    On 10th August 2011, I created and release a Process Order for material S10 copying component materials R72 and R82.. Goods issue for component materials R72 and R82 were done for this process order using tcode MIGO (mvt type 261).
    It  takes four to five days to properly blend components R72 and R82 to obtain S10.
    It means Goods Receipt for this process order will be done on 14th or 15th August when this blending has been completed.
    Management suddenly issues a directive that stock take should be carried out in the plant on the 12th August 2011, and my process order is still open and cannot be closed ( or goods receipt cannot be done)  because blending is yet to be completed.
    Please how do I take care of this scenario/situation since Goods Issue has been done already?
    How will the Accountants see or get the correct value of inventory?

    When I run WIP Calculation for my Process Order, what will be the effect ? I mean what accouts are updated by WIP Calculation within a period (not across a perion or  at period end)?
    GI values issued to the Process order will come into WIP GL .( Since your client want to know the stock take should be carried out in the plant on the 12th August 2011- we are doing WIP calculation)
    > After  this WIP Calculation is run,  and say about 2days later, Goods Receipt for this process order is to be posted, what steps am I suppose to carry out?
    After GR Made, Run a WIP calculation again for the order so that The WIP from the GL account will get reduced ,now WIP= (GI value + confirmation ) -(GR Value),
    Check in DEV system before doing in PRD,
    On Month end, do the variance calculation and do the settlement

  • Order Confirmation Without Doing Goods Issue & No Goods Receipt W/o Confirm

    Hi,
         I am facing a problem at client site & i need a quick response from you people.
    If i am not doing GOODS ISSUE to a Production Order the system is allowing me to do Confirmation for that Production order & also the system is allowing me to do GOODS RECEIPT for that Order before doing complete Confirmation.
    My client wants that Without doing Goods Issue it should not allow order confirmation & also No Goods receipt without doing Final confirmation. Please help me regarding this configuration, How to do it. If it is possible then please help me& tell how to do it.
    I am in final stage of my project.Please i want a quick response.
    regards
    Jimmy

    Hi Ashish,
    you need to create new thread anyway
    for process industry you need to use CONFPI 02  you can put this in SMOD and go to display in that you can see component when you click that you can find functional module  : EXIT_SAPLCORF_402 click in that you can see include in which you need to modify
    take help of ABAP and do some modify to this module
    Thanks
    Bala

Maybe you are looking for