Issue with graphical variable usage

Dear All,
I have a scenario where in based on the availability of 3 different fields(in target) I have to pass a certain values to another target field. I am using graphical variable(LGORT_STATUS, KUNNR_STATUS and LIFNR_STATUS) for each of the field and setting them as 'true' or 'false'. I am trying to use this status to decide on the value to be passed to another field. But unfortunately I am unable to do so. Kindly help me with it.
Please find attached screenshot of the variable values.
Regards,
Vishal

Hi Harish/Osman,
First the actual field(For Ex: LGORT) is mapped based on certain condition and pass the value. Similar condition is used to passed 'true' or 'false' to the variable. Later in the mapping I want to use this status(for LGORT,KUNNR and LIFNR) is used to determine value for SOBKZ.
Regards,
Vishal

Similar Messages

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

Issue with graphics tearing on thumb scroll in Flex 3

We are seeing some off issues with graphics (one using the charting package and the other using degrafa) tearing on thumb scrolling in a large Flex 3 app. It's very hard to reproduce on OSX with the latest versions of Safari and Firefox, but it shows almost immediately when you run the app on Windows or Linux (regardless of the browser). I took one of the pieces out of the app and put it into a very simple testbed app and can't get the problem to show on Windows (i was hoping to isolate the issue in a smaller test case, but no such luck).
So, ii've got a few idea's on how to work around the issue, but i was wondering if anyone else has seen this type of problem before?
Problem:
     - graphics tear on thumb scroll
     - doesn't happen if you click in the track or use the arrows
     - one view is using the charting package, the other view is using degrafa
Thanks for any comments or suggestions...
Richard

SOLUTION: changed wmode from "opaque" to "window" in the jsp serving as the wrapper for the app's main swf...
Here's the reference we used to determine the proper setting for wmode;
http://kb2.adobe.com/cps/127/tn_12701.html
Thanks again for the response... Richard

Issues with Shared Variables in Systems Running for Extended Periods of Time

I am designing a large SCADA system using LabVIEW DSC and cRIOs. My plan is to use shared variables to communicate the majority of the information across my network (much like "tags" in a normal SCADA system).
I'm wondering if anyone has experienced issues (connection failures, etc...) with shared variables running on systems for months (both real-time and windows based PCs) without the cRIO or PC being restarted/redeploying the variables. What is the stability of the Shared Variable Engine over extended periods of time?
Thank you for the input.
--CLD--
LV 6.1, 8.6.1, 2011 SP1, 2012 SP1

I have a system with 2 cRIO's each with Ethercat extension chassis. Each cRIO hosts ~100 NSV's and is running the scan engine at 40 Hz.
Each cRIO is coupled to a HMI that has front panel control bindings to NSV's hosted on the cRIO as well as a windows hosted mirror library (used for citadel db logging) that is also bound to the cRIO NSV library. The cRIO's have monay months of contiguous run time without reboot and I closely monitor cpu and memory usage and also rt performance metrics and will log faults if there are any such events. I also use NSV's for messaging from the HMI to the cRIO for such things as setting zero offset values and deploying configuration parameters. My overall findings are that the SV engine and the PSP are stable and efficient (especially NSV<->NSV and NSV<->HMI binding)

Issue with Default Variable in WAD after Java Patch 7.01.7.31

Hello all,
I'm running into an issue with the Web Application Designer Template execution for a particular default variable. This started occuring after Java Patch 7.01.7.31 we had implented over the weekend.
The issue is when Executing the WAD Template, we have a selection screen with a variable with default values assigned to it. When leaving the default values and hitting Ok to execute through the screen does not register and stays as is and I get a message at the top with the following: Characteristic Prob % Number has no master data for "1.00" or you do not have authorization.
This only seems to occur for this default variable on info object Prob % Number, the other default variables seem to work fine. Also another note when clearing out the values it returns data and executes through. The value 1.00 is also a valid value in the cube and also in the output display. If we run this report in the BEx analyzer, the selection screen executes through with the default variable perfectly fine, this is only an issue with the Web Application Designer Template.
Has anyone ran into this? I've searched and have not found any notes as of yet.
Thank you,
-Andy

Dear Andy,
Please raise this to SAP, seems like a strange problem this needs to be addressed by OSS note only.
Close this thread once you get a solution.
Regards.
Den

Issue with declaring variable

I am developing a multiuser application in flash, using smartfox server and as 2.0, but i am having an issue with defining/declaring a variable/object/array, and then accessing it. I am attempting to define "curMap" (whether it be a variable, array, object, whatever works) within the following function, as the returned array from the server, "resObj". This works fine as long as i only call up "curMap" WITHIN this function(as you see in the line : r_txt.text = curMap;) however whenever I try to call up "curMap" on the frame coding, outside the function, it comes back as undefined, or typically nothing. Any Ideas as to how to properly do/assign this? I have tried various things(such as _root., _global, or defining the var "curMap" outside the function) with no luck.
Here is my Code:
smartfox.onExtensionResponse = function(resObj:Object, type:String)
        if (type == "xml")
                if (resObj._cmd == "getMap")
                    curMap = resObj.db[0];
                    r_txt.text = curMap;
                }else if (resObj._cmd == "getSurr"){
                 surrMap = resObj.db;
                 b_txt.text = surrMap[0];
thanks

ahhh! yup that fixes it, thanks!

Issue With OLAP Variable

HI all,
we have an issue with the OLAP variable. One of the SAP olap variable(0P-perf1) is processed as Authorisation. where it should be sap exit. When we try to change at the BEx analyzer it was in disabled status.
My question here are :
1) How we can change the processing type?

Hi,
Pls refer link
creation of OLAP Variable
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55ece09411d2acb90000e829fbfe/frameset.htm
It may help you.
Thanks
Edited by: npathak on Aug 4, 2010 4:09 PM

Issue with substitution variable with @MDSHIFT in BR in Calc Manager

Hi Experts,
We have a BR in EAS which is working fine.
and exported to Calcmanager, now while validation it is giving error "@BaseScenario" is not found.
the code is
@MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->&BaseScenario->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",);
if i hard code it like @MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->"P7PP"->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",); working fine.
is there any limitation with calc manger and substitution variables?
Thanks
GP

There seems to be many issues with validations in calc manager, does the rule run if you dont validate.
Cheers
John
http://john-goodwin.blogspot.com/

Terminal issues with environmental variables

I am having an issue with persisting environmental variables during a session. I am running an app that requires the sequential running of 3 scripts setenv.sh, build.sh, run.sh.
The first script sets variables that are being used by the other scripts. The script just contains lines like
"export ADVISOR_HOME=/Applications/Blaze/Advisor65;"
if i add echo the variables name in the script they are set, but immediately after or with env they are gone.
From my understanding (not much) these should persist as long as the window is open. Is there any setting that is being set in OS X that is sandboxing scripts? It would seem to be security-minded but is causing problems.
Also is there any way to temporarily disable the requirement to prefix a command call with ./ in os x. Many of the included scripts are calling methods in the same directory and I am having to alter a lot of scripts to include ./
Thanks in advance,
walter

walter deane wrote:
I am having an issue with persisting environmental variables during a session. I am running an app that requires the sequential running of 3 scripts setenv.sh, build.sh, run.sh.
The first script sets variables that are being used by the other scripts. The script just contains lines like
"export ADVISOR_HOME=/Applications/Blaze/Advisor65;"
if i add echo the variables name in the script they are set, but immediately after or with env they are gone.
Do you mean you echo them from within the script and then they are gone after the script ends? That would be normal. If you want them to persist through the other scripts, you could combine the scripts. The problem is that you're setting them in one process and expecting them to persist in another process. Unless the second is a child of the first, that won't work. I think it would work if you executed the second two scripts from within the first script because they would then be children of the first process. Does that make sense? I'm not sure of the correct terminology here and I can't draw a tree which is what I want to do! Another option might be to source setenv.sh rather than running it (i.e. wouldn't need to be executable) - the same way the shell does when starting up, I think.
From my understanding (not much) these should persist as long as the window is open.
I don't think it has anything to do with windows. It is just when the process exits. If you set such variables at the command line, they'll persist until the window closes because they'll persist until the process exits which is usually when the window closes. At least, in the simplest cases. But it isn't the window staying open or not that's important. It's that everything else done in the window happens to inherit the environment from the parent process. In truth, this often isn't the case anyway, but I expect that's the source of the misunderstanding.
Is there any setting that is being set in OS X that is sandboxing scripts? It would seem to be security-minded but is causing problems.
Nothing special that I know of. There is stuff for something like this in Leopard but you'd have to enable it and I'm not sure it applies here.
Also is there any way to temporarily disable the requirement to prefix a command call with ./ in os x. Many of the included scripts are calling methods in the same directory and I am having to alter a lot of scripts to include ./
You can do this but it is extremely insecure. Essentially, you can add the current directory to PATH. (PATH=$PATH:./; export PATH) It would be much, much better - much, much safer - to edit the scripts. Can you not use sed to edit them? If there is some sort of pattern, there's no need to do it by hand.
If this is an application you plan to share, you should certainly not consider changing PATH in this way unless you are aiming to produce an application with maximum destructive potential! If you don't plan to share, of course, it is your call!
- cfr

Exchange 2013 issue with High memory Usage on Mailbox server post SP1 update.

So we have been chugging along fine since Feb 2 2014.
I performed a migration from 2010 from the UK to the US doing "incremental" mailbox moves. (get in contact with me if you want to know how. But we moved 400 Mailboxes averaging at 2gb a piece from the UK to the US, over the transcontinental link.
& then the weekend of the final, had everyone & everything done by the end of the cutover weekend)
Any woot.
So I applied the 2013 SP1 a few weeks back, & have intermitantly been alerted to the memory spiking over 95%. For me (and for any exchange admin) when i get those types of alerts i drop everything & run to the nearest PC to see what is going on.
Now the first & second time, it was an issue with logs filling up the drives, & my clean log script not running to remove any logs older than 30 days. But since then it has been legitimate 95%+ memory usage.
For the most part its been 95-97 max, with 1 or 2 times hitting 98. After some time, the memory does drop back down to 94.
this is ....umm "fine" however it is becoming a nuisance, since most of the time it corrects itself. What i dont want to happen is get into the groove of saying "ah bah! its nothing" & letting it go.
the server has 16gb of memory in it, it is the Mailbox server (CAS /Frontend is on a seperate server)
below is a screen shot, so i know the Storeworker grabs whatever it feels like grabbing, however it does NOT EVER release memory. I also see the NodeRunner.exe (2 of them) is always around 900 almost a MB
now if i could somehow get the first 2 Storeworkers to drop down to 900ish, then that should alleviate my memory issues.
what I am m looking for is some type of "magic bullet" to put my memory issues at ease..

thats the problem & seems to be a misconception.
Exchange NEVER releases the memory when other things need it. As the users state in your thread you linked. (i came across that early in my search for a resolution). An example is if another admin & myself log into the backend server at the same
time & begin clicking around opening things, etc..Memory will go to 100% which = No Buenos.
There are numerous post all over the internet from people who say it releases, but them 5 more comments to that 1 saying that it does not.
I know what the process's do, however it seems like the SP1 has increased memory usage, as typically the Store.exe would only grab about 900-1000.
in terms of the noderunner, once again i know its role, however we are now 2 months+ live on 2013 post migration, I do not think it is still indexing all those emails.
all DB's report healthy.
Name Status CopyQueue ReplayQueue LastInspectedLogTime ContentIndex
Length Length State
WBAC1\EXCHBE001 Mounted 0 0
Healthy
WBAC2\EXCHBE001 Mounted 0 0
Healthy
WBAC3\EXCHBE001 Mounted 0 0
Healthy
WBAC4\EXCHBE001 Mounted 0 0
Healthy
WBAC5\EXCHBE001 Mounted 0 0
Healthy

Issue with presentation variables, dashboard prompt and filter

Dear Guru's,
I have a question about constraining a request with presentation variable set by a dashboard prompt. I have a dashboard prompt, that stores its value in a presentation variable . The prompt is about region. When the dashboard opens, the default of the prompt is all choices and it needs to show my reports with "All Choices". I've created the following filter on my two reports on the dashboard:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
One report is just the column "Dim Student"."Region" (to see if it works) and with this report the above filter works just fine. When nothing is prompted it shows "All Choices" when a choice is made the report responds accordingly.
BUT
The second report on my dash with the same region column, but extended with some time dimension columns and a measure gives an error which I'm not able to solve.
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14023] None of the fact sources for ToDate(# Feitelijke Instroom:[DAggr(Feit Instroom en Uitstroom Opleidingen.# Feitelijke Instroom by [ Dim Tijd.Maand Omschrijving, Dim Tijd.Maand Nummer, Dim Tijd.Jaar, Dim Kwalificatie.Kwalificatie Niveau, Dim Leerling.RCBREGIO Regio] )], [Level JAAR]) are compatible with the detail filter [Dim Tijd.Maand Nummer = 3, Dim Tijd.Jaar = 2010].+
+(HY000)SQL Issued: SELECT "Dim Tijd".Jaar saw_0, "Dim Tijd"."Maand Nummer" saw_1, "Dim Tijd"."Maand Omschrijving" saw_2, "Dim Kwalificatie"."Kwalificatie Niveau" saw_3, "Dim Leerling"."RCBREGIO Regio" saw_4, "Feit Instroom en Uitstroom Opleidingen"."# Feitelijke Instroom Cumulatief" saw_5, REPORT_SUM(saw_5 BY saw_0, saw_1, saw_2) FROM repos_x WHERE ("Dim Tijd".Jaar = 2010) AND ("Dim Tijd"."Maand Nummer" = 3) AND (("Dim Leerling"."RCBREGIO Regio" = 'Noord-Oost') OR ('Noord-Oost' IS NULL)) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4+
While the exact same report but without the "or '@{variables.GILLES}' IS NULL" doesn't throw any errors but doesn't show the "all choices" by default.
The ultimate goal to achieve is to build a dashboard with several reports from several subject areas with one single prompt that opens default with "all choices" and constrains the reports accordingly.
Any help is highly appreciated.
Kind Regards,
Gilles

Phani,
I know "All Choices" is a special value and that it doesn't represent NULL. My filter construction seems to work fine.
My filter condition:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
When it's set by the prompt it filters the request accordingly (first condition evaluates to true), when it's not set the second condition evaluates to true and shows all the results (or it's not filtered).
The problem is that it doesn't work when time dimensions are combined with this filter. Then it throws the error mentioned in the first post.
By the way: your suggested solution doesn't work.

Z68A-GD55(G3) BIOS Issue With Graphics Card

I have been having a strange issue with the BIOS. When I use my graphics card it appears all glitched. (see below picture) When the graphics card is removed it appears fine using onboard graphics.
Processor: Intel Core i7 2600k
RAM: 2x4GB Corsair Vengeance 1600MHz
Graphics Card: MSI HD 6950 2GB Twin Frozr III
PSU: Corsair TX850M
Hard Drive: ADATA 60GB SSD

What screen connection are you using ? Can you try a normal d-Sub connection to start with ?
Also suggest you do a CMOS clear after the connection.
What did you use before this card and did you clean all old drivers before installing the new card ?>>Driver Sweeper<<

Are there known issues with graphics cards?

I have an Intel Core i7 2.66 GHz with 8GB of RAM and a graphics card with
Intel HD Graphics
Type:    GPU
Bus:    Built-In
VRAM (Total):    288 MB
Vendor:    Intel (0x8086)
Device ID:    0x0046
Revision ID:    0x0018
gMux Version:    1.9.21
My screen occassionaly gets completely scrambled, where I move the trackpad and windows and other things will ghosted items will materialize in the background, though I am unable to click on anything or do anything, so I have to cut the power. This happens when I only have 1 or maybe 2 programs open.
Are there any known issues with the graphics cards on these Macbook Pros? Anyone know what might be causing it?
Thanks.

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Issue with Graphics card...suggestions?

So I currently have a 17" iMac 1.83 ghz Intel Core 2 Duo (Late 2006) that we were using as a secondary desktop for our daughter to use. Last summer, after loading Lion onto our current iMac, I tried loading Lion onto older iMac after upgrading the RAM to make it compatible. The RAM install went fine and was tested and all was good. After the Lion install, the screen went squiggly indicating some kind of graphics issue.
I had my friend inspect the issue (who is a Mac Genius) and he confirmed after various tests the graphics card went bad. He further informed me that the card can only be replaced by replacing the motherboard since the graphics card is integrated into the board. Sounds like a costly fix, according to him, for a secondary computer.
My issue is, is it common for graphics cards to go bad like that? Did the Lion install have something to do with graphics failure? It all just seemed weird to me since the machine never gave us any issues in the past? Any thoughts or suggestions would be welcomed!!
Finally, what would be a fair price if I tried selling it for parts on CL or eBay?
Thanks in advance!!
Matt

mg8r1016 wrote:
Sounds like a costly fix, according to him
Sure is it is in the upper hundreds of dollars. My friend just had one replace under warranty and it would have cost $800 out of pocket.
My issue is, is it common for graphics cards to go bad like that?
No, it is not common, although Apple did have a GPU supplier that provided some faulty ones in a few instances: http://support.apple.com/kb/ts2377
Did the Lion install have something to do with graphics failure?
No. Installing an operating system should not cause a graphics card to fail. Just a coincidence.
Finally, what would be a fair price if I tried selling it for parts on CL or eBay?
Whatever you can get for it really. I'm not sure how one can accurately assess a value correctly on a Mac with such a crucial hardware component gone bad.

Issue with embedding and usage of worklist TF in ADF app

In our application, we have embedded the worklist TF from "adflibTasklistTaskflow.jar" in our jspx page. Below is the page def binding for the TF
<taskFlow id="taskListtaskflowdefinition1"
taskFlowId="/WEB-INF/taskList-task-flow-definition.xml#taskList-task-flow-definition"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="federatedMode" value="false"/>
<parameter id="showActionDropdown" value="true"/>
<parameter id="showViewFilter" value="true"/>
<parameter id="showAssignmentFilter" value="true"/>
<parameter id="showStatusFilter" value="true"/>
<parameter id="showSearchControl" value="true"/>
<parameter id="showTaskTabs" value="false"/>
<parameter id="displayColumnsList"
value="title, state, creator, assignedDate"/>
</parameters>
</taskFlow>
Issue
When we try to re-assign the claimed task in the worklist, it opens up a re-assign popup - "Identity browser".
Within Reassign Screen:
- Select "All" value on the dropdown
- Enter a last name on the text field. I.e. "Kristoffersson"
Or enter an email address.
- SOA error will appear as mentioned below
"Search failed with an error. Service error.. Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services"
This issue is not seen for any other option in the drop down other than "All" (e.g. "users", "group", etc. it is displaying all corresponding search results of users from LDAP)
Below are the library which we have added in our UI project:
I. BPM worklist components
1) adflibTasklistTaskflow.jar
2) adflibWorklistComponents.jar
II. BPM Workflow
1) bpm-services.jar
2) bpm-infra.jar
III. BPM taskflow
1) bpm-workflow-datacontrol.jar
IV. BPM services
1) bpm-services.jar
Is there anything missing from the uptake? Please suggest.
Also, is there any uptake document for the same (embedding human worklist into a page)?

Hi,
I remember a similar issue with inner frames that should be fixed in JDeveloper 10.1.3.3. The problem was that the ADF Faces JavaScript did not get the correct document root.
Frank

Issue with graphical variable usage

Similar Messages

Maybe you are looking for