Issue with HDPI screen of resolution 3200 x 1800

When using Adobe Reader with my Dell XPS 15 (resolution 3200 x 1800), we barely can see the right part of the screen (characters are extremely small). Does anyone have this issue ? Any updates to come from Adobe regarding this?

Hey Pat,
Thanks for the link, but I did it and still I got the same resolution (very small characters on the right side)... Any other solution?
Best

Similar Messages

  • Issue with blank screen HP G60-447CL Notebook PC

    Issue with blank screen  HP G60-447CL Notebook PC, I purchased warranty and have had the laptop serviced before for the same exact issue.  Same problem has come up again blank screen it has been less than five months this problem was fixed and it has started again:  blank screen white, laptop is powered on nothing else happens.  Now I cannot reach anyone.

    You're very welcome.
    I have tried many times to help folks with different drivers and nothing has worked.
    I'd say at least a dozen people have posted about this issue, and no one can fix it.
    I don't understand it either.

  • We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Thank you!

    We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Now that we are 2 upgrades behind, I'm getting little concerned.  Thank you!

    Oh, well that was a whole other kettle of fish:
    Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
    When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
    When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
    I didn't have to do anything with the iPhoto Libraries, that I can recall.
    I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

  • Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

    Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
    We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

    Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
    I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

  • I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

  • Issue with Full Screen & Input languages (Mavericks 10.9.1)

    I have two issues with the latest (Version 8.0.24308) Microsoft Remote Desktop from the Mac App store:
    1. If I tick the connection entry "Start session in fullscreen" option, after connect the desktop slips upwards like on the screenshot (below on the link)
    2. The default input method switches to Latvian after connect (never used Latvian anywhere...).
    On my Mac:
    - System language: Hungarian
    - Input language: Hungarian
    On the server:
    - System language: English
    - Input language: Hungarian (default) + English
    +: the app doesn't supports Retina display resolution :(
    Screen Shot link:
    db.tt/yYKN0arM

    Hi,
    1. The version 8.0.24308 offers updated functionality for full screen mode to users of OS X 10.7+:
    OS X native: The native full screen feature for the Mac OS X version.
    Custom: The custom full screen mode enables the multi-monitor feature in order to provide a better experience for users of Mac OS X versions 10.7 and 10.8.
    Important information for users of 10.9: if you have disabled "Displays have separate Spaces" in Mavericks
    (System Preferences > Mission Control) go to Preferences > Resolution in the Microsoft Remote Desktop client and configure the setting using the same option.
    Please try the OS X native mode and see how it works.
    2. The OS keyboard locale, is suggested to the remote PC. Therefore, please check the keyboard locale.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • OS X LION Issues with Full-Screen; iPhoto, Image Capture & Mail

    Hello,
    I'm experiencing un-Apple-like issues (bugs) with Lion in Full-Screen mode.
    For example - iPhoto doesn't seem to like Full-Screen mode. If iPhoto is open and I connect a camera, for which I prefer Image Capture to retrieve my pics... Image Capture opens 'behind' the full-screen iPhoto, but I can't get to it. Image Capture shows as open on the menu bar in iPhoto's full-screen mode. If I go to the desktop (where it should be opening) Image Capture isn't 'on top' and clicking it takes me back to iPhoto full-screen
    Similarly, if I get mail and return to the desktop (the only way to see the dock) and I click on the 'Mail' app icon - I am catapulted into Image Capture... or iPhoto. Returning to the Desktop to click the Mail icon from the dock... takes me to Image Capture... or iPhoto. The 3rd try takes me to the Mail.app which is usually always open and in full-screen mode.
    While I'm complaining about bugs, I'd like to mention that I am fully dismayed by the loss of control in full-screen mode when using apps such as Mail or iPhoto. The Mail app opens an email to edit (such as a reply) but you can't access any other mail docs to 'cut and paste' info from. I can only click SEND or CANCEL.
    What if I don't want to CANCEL? I just want to go to another email and cut a piece to paste.. I have to exit full-screen mode which allows me to open two email documents at once, then cut and paste. Essentially Mail in Full-Screen is only a reader... not a work area. I can only access the document I have open, since it greys out the Message Viewer. You can't click on the message viewer nor access any of the features of Mail.app. You can only write your email and either Cancel or Send. Where is the 'hold on a second while I go cut and paste'? I don't want to cancel.
    Can't seem to use Safari since I'm constantly three-finger swiping it away. My cursor hovers over a text field and suddenly it's zooming in and locks text input. I have to iPhone-like swipe to expand to exit this inadvertent partial (very slight) zoom. Sometimes the zoom is so partial that I can't figure out what's going on until I just exit full-screen mode, close the window and start over.
    Seems like I'm starting over and over and over... just to do simple things. Inadvertent zooming, inadvertent 3-finger returning to Desktop, inadvertent changing apps... ugh.
    I'm willing to let go of the old and embrace the new future but so far it's been pretty uncomfortable for me to constantly monitor my overly sensitive trackpad gesturing combined with constant bugs and glitches. I'll save complaining about iPhoto's over-simplification (apparently for dummies) like the new Edit menu, Export menu, etc.. since it's more iLife than Lion related. Rate Lion: 2 out of 5 stars for ease of use & features complicated by unrefined software issues.

    I've tried follwoing these instructions but I have an issue with
    # Create snort user. The intention is to let user snort have access only to the snort database.
    $ sudo createuser -U _postgres -P snort
    Password:
    Enter password for new role:
    Enter it again:
    Shall the new role be a superuser? (y/n) n
    Shall the new role be allowed to create databases? (y/n) n
    Shall the new role be allowed to create more new roles? (y/n) n
    It keeps telling me "could not connect to database postgres: could not connect to server: No such file or directory"
    I'm running OSX Mountain Lion, and have verified using serveradmin status postgres that it is up and running.

  • Issue with finder screen sharing.

          My iOS development partner and I are currently having issues with screen sharing through the finder.  Prior to installing OSX Mavericks there was no issue with adding each other as users to each others computer, but after the install is when the problem started happening.  At the root level there are multiple users on each other's computers with our corresponding names but they don't appear in Users and Groups.  So, having phantom users on each other's computers, we took them into the Genius Bar at our local apple store.  They tried a few different methods, none of which worked, and had us reinstall the operating system and now we're back at square one having to resort to using the "permission" screen share as opposed to just being able to screen share directly though user accounts that we previously set in system preferences. I used the following console command, but it doesn't show the same accounts in the Users and Groups under System Preferences.: (dscl . list /Users | grep -v "^_") Any help or insight would be greatly appreciated.
    Currently running Software  OS X 10.9.1 (13B42) on both machines.

    Found an answer at the following link.
    https://discussions.apple.com/thread/5677786?start=0&tstart=0
    Message was edited by: Shadowchief

  • Issue with selection screen element on At slection scree

    Hi All,
    I am facing an issue with a checkbox which is present within the subscreen of a standard selection screen.
    The issue is that the value of the combobox get toggled by itselfon the event mentioned below. I am unable to find out how this combo box value gets changed by itself on the screen events.I tried clear statemetns etc nothing is helping. I debugged with a watch point on this screen element and found this to happen.It just changes the value of the element to a previously held state.I m trying to clear the combobox but this event puts back the tick mark.How can I stop this.
    AT SELECTION-SCREEN ON COL_FROM.  "COL_FROM is another screen element diffrent from the combobox
    Thanks

    Hi Vighneswaran CE,
    This event corresponds to the PAI module of the COL_FROM field. So, it gets executed each time you press any valid function code on the screen (unless there was an error in a previous field). Nothing abnormal here.
    That's difficult to help you on that topic, you'd better tell us exactly what report it is, where you have added your code (and what code) to change the checkbox, ...
    Best regards,
    Sandra

  • Anyone have issues with "touch screen" not responding?

    Does anyone find that the touch screen doesn't respond? I have huge issues with this style.
    Touching and swiping on a screen that is 1.5 inches isn't fun. I need shade to read the screen (bad for snow), I need to go thru so much just to get to a song, a podcast, whatever that was playing before I HAD to turn off nana. I need to turn off nano each time.
    1. Turn on by holding button like forever.
    2. swipe, swipe, swipe, swipe to get to songs or podcast. Select, select, touch selcet, not selecting, touch, touch touch.
    3. Select 'songs; selevet something else to get to a screen that says shuffle.
    4. Select, select, touch, touch, use index finger, thumb, touch, breath on finger, touch again.
    5. After one song plays after selecting "shuffle", it repeats, repeats,
    6. Take ipod out of pocket, stand in shade, hit the snooze whatever button, to activate screen, Is screen activitated? yes? But it blinked off to quick to make selectioon of touch proof screen.
    7. Walk inside to touch screen, to see screen. Hit button, wait for long time for this to start again (much like laptop starting).
    8. Swipe to get to menu with songs, swipe, swipe, swipe swipe.
    9. Select music: albums, artist songs. By selecting I mean touch touch touch, touch, use thumb, touch. for each selection
    10. Are you sure this is an Apple product?
    Can I return this POS and wait for someone to go back to what worked best??

    Oh, and yes I have restored to factory settings. Then resynch.
    I have done the soft reset or whatever it's called on this one.
    It is updated.

  • I have a late 2009 imac i am having issues with my screen flickering and getting dark

    i have a late 2009 imac  21 inch i am having problems with my screen flickering ND GETTING DARK DOES THIS MEAN THAT MY COMPUTER IA FAILING

    I have partly the same problem (Sceen blackening) sparodically.
    2010 iMAC  with I7 CPU and ATI Radeon HD 4850 512 MB Graphics.
    If I lower the brightness to around (3 or sometimes 4 of the on screen squares F2) the issue does not happen at all. I prefer a bright screen.
    The issue commenced immediately after instaalling OS X 10.8.2 update one year ago.
    The current software is  OS X 10.9 (13A603)
    The graphics on this computer are always first rate when working properly even at maximum brightness
    There are particular days and times when the problem routinely occurs.
    Some of my neighbors with iMacs have similar problems.
    I live adjacent to the City of London in an area where new building seems to be developing faster than the various utilities and there are known Power Network issues. Professional surge supressors make no difference.
    I live in a large property with four independent ring mais. The issue is present on all four rings. I have yet to take the computer elsewhere to possibly eliminate power issues from the problem.
    I am reluctant to replace an otherwise fine top of range iMac which otherwise serves me well since the same problems might be present.

  • Issue with mbp screen

    I have a 15" macbook pro with a c2d and a glossy screen....and there is something really funky with my screen....in the bottom left part of my screen... there is an area that is brighter than the rest of my screen....any ideas what the deal is?

    Could be:
    - Bad memory module (which would need to be replaced)
    - Bad memory slot (logic board would need to be replaced)
    - Badly seated memory module
    Bring it to an Apple store or AASP.

  • I have a issue with my screen now and then it shows colored pixels all over the screen

    is started somw days ago i didnt do any software update but when i change webpages or apps on the desktop thise pixels come out it's like small squares colored and they go away after a few seconds. what can it be? maybe some issues with the video card?

    I have this as well.  imac i7.  Not sure if its hardware (video card) or software related.  Does it look like this?

  • Help Please! Serious Issues with Placing Screen Shots.

    Hi,
    I'm a long time browser of these forums but this is my first post. I'm pulling my hair out. I've spent hours on this and have a looming deadline. I've a lot of experience in PS and AI but have only started using ID recently. I've searched the forums and web in general, I've found people with similar or the same problems (both on Mac and Windows) but can't find a solution anywhere. I really think there's got to be a simple solution but I can't figure it out.
    I'm using ID CS6 on Mac OS X 10.7.5
    I've created several mutilpage PDFs (not for print, for screen viewing) in ID using vector graphics from AI without any issue. However, this time I'm trying to create a multipage PDF that will be a tutorial for GarageBand that requires dozens of edited screen shots. When I place the cropped screen shots they come into ID really badly pixelated. I've tried bring them in as several different file types, PNG, BMP, TIFF, JPEG, but all with the same result. I've tried scaling them in different ways and exporting the PDF in different ways but the screen shots still look terrible.
    I have the document set up for digital publishing and it's A4 Landscape. I've changed the display performance to High Quality Display but this shouldn't really matter because the exported PDF still has horrible looking screen shots.
    Sadly...when I bring the same screen shots into Microsoft Word Mac they look absolutely perfect. I really, REALLY don't want to be forced to use Word to create a tutorial, or anything for that matter.
    Can anybody help? Please!
    Thanks in advance.
    Colm

    It seems ludacris and defeats the purpose of the software for me since I hoped to use it mainly for tutorials containing screenshots.
    The user interface you are capturing is designed to the monitor pixel grid and captures degrade if you sample them up or down. You can see the resampling problem if you use OSX's zoom feature–zoom in and the interface get's larger but it also blurs.
    And extreme example would be a checkerboard drawn at 10 pixels per inch. Increasing the resolution to 300ppi doesn't add any information and degrades the checkerboard's appearance:
    When you place a screen capture in ID and scale it, there's no resampling—the capture is resized and the pixels are scaled larger or smaller. If you print the capture it will look fine because a hi-res printer can accurately draw the different scaled resolutions.
    When you export to PDF there's going to be a problem displaying the captures in Acrobat because there would only be one zoom level where the original interface pixels display unchanged. It's similar to Photoshop where the screen capture looks best at 100% where the image to monitor ratio is 1:1, but in Acrobat the 1:1 ratio might be any zoom percentage depending on how the capture was resized in ID.

  • Acer XB270HU ULMB Issue with my screen, or drivers maybe? Baffled

    Greetings!  I bought this XB270HU earlier this month and I absolutely love it.  It seems like G-Sync works like a charm, and that 144Hz refresh rate is wonderful.  There's some slight bleed in the upper left that can be seen with black bars around some videos, but never in the videos themselves.  Considering that is the only way it can be spotted, I figured I finally found a GREAT monitor.  My old one was a Dell S2440L that had outstanding contrast and zero bleed, but had massive overdrive issues.   While everything is going great, I chose to use ULMB sparingly since it bothered my eyes the very first time I tried it out, though the visibly dimmer screen didn't bother me.  For the record, this monitor is one that supports ULMB at 120Hz and if you try to enable it at 144Hz, the monitor will flash a message up saying it can only be used at 85 100 and 120 Hz.  So, it *does* work at 120Hz.  I am sure I may have used nvidia's GeForce Experience to update the graphics drivers at least twice out of habit, and Windows Update installed an XB270HU driver as well.  I recently went to turn ULMB on at 120Hz to use it with a movie, and was shocked to see that the screen got *brighter* instead of dimming.  I chose 85 and 100 Hz to see, and it brightened as well, to the same settings.  I don't really understand at all what happened, but it feels as if its not even using ULMB.  Since it was clearly working and suddenly is not, is this a driver issue from an update, or did something go haywire inside the monitor?  I never tinkered with anything other than the brightness levels.  I have the 144Hz Gsync mode at 50% Brightness instead of the 36% that i had it on before and when I turn ULMB on at 30% brightness, it looks much brighter than it does now.  I find this incredibly strange and was hoping someone could shed some light on this, or help me fix it.   Some Specs:Windows 8.1 64bit (updating to 10 soon)Intel Core i7-3770K @ 4.4GhzASUS Maximus V Formula BIOS 190316GB (8GBx2) DDR3-2133 G.Skill RipJaws X series memoryeVGA GeForce GTX 980 Ti SC+ ACX 2.0 Using the DisplayPort cable that came with the monitor still.

    acheron,
    Could you please PM (private message) me the following information, I believe that we can update the firmware and fix that dimming/brightness issue.
    Serial number:
    Contact name:
    Contact number:
    Email address:
    Shipping address:
    Purchase date:
    Resolution attempting to use:
    Max resolution monitor will work at 144 Hz without issues:
    Video card(s) is use:
    Video connection(s):
    Symptoms: 

Maybe you are looking for