Issue with HDV m2v files and importprocessserver.exe

I have 18 or so 40Min m2v files at 1440x1080 29.7P, These file go into premiere and edit with no problem. But when I close premiere and reopen it the project takes over 2 hours to load. The reason for the slowdown is that ImporterProcessServer.exe is going through all 400 or so GB of video and reading it all in again. Now I know that premiere needs to make mpegindex files for m2v's and it does do that, all the videos has a corresponding entry in the media cache and a mpegindex file in their directory. Does anyone know why its still reading through all the video files? I'm 100% positive this is not a hardware issue but just because I'm sure someone will ask:
3.166GHZ Dual Core
8GB Ram
2x80GB raid 0 (os)
2x1TB raid 0 (footage)
both raids are recently defragmented and have in excess of 40% diskspace free
windows vista 64bit

As I stated in the original post the only preset I have that
even comes close to matching a P2 Preset is " HDVCPRO50/720p/24pn" .
I have installed all the P2 software that came with camera and all drivers. I have looked at the Panasonic site. Called Adobe and no help only thing is Adobe said I needed Quicktime 7.6.5 not 7.6.6.

Similar Messages

  • Issue with building solution file using devenv.exe

    Hi,
    I am facing an issue while building my solution file (developed in Visual Studio 2010) using devenv.exe from command line. The error is as below.
    C:\Code\trunnk\common\Controller\Controller.vcxproj : error  : The expression "[System.IO.Path]::Combine(C:\Code\trunk\common\Controller\, "C:\Code\trunk\out/Release/x64"\Controller.exe)" cannot be evaluated. Illegal characters in
    path.  C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets
    Could you please help me in understanding the above error and fixing it.

    Thanks for all the information. Currently i've tried to use both modules (TextCodepageConversionBean and XMLAnonymizerBean) in my Sender File Adapter, but for now without any result...
    To describe the situation: i am using flatfiles which i am fetched from the file system (NFS) by the Sender File Adapter. To translate the characters to the XML strucutre, the File Content Conversion protocol is been used.
    The content conversion defines the structure base on the first two characters on each row in the flat file. This worked fine till one of our suppliers is delivering BOM characters like "EF BB BF" in the beginning of the file.The content conversion is not able to recognize my header characters in this situation, which will normally start with "01".
    Any suggestions?

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

  • I am using Toast 11 to burn dvd's. With FCP10.1.3  I could go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn.  How can you do this with FCP 10.1.4?

    I am using Toast 11 to burn dvd's. With FCP10.1.3  I used to go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn.  How can you do this with FCP 10.1.4? 

    BenB it creates a disc image only and it's not in .m2v. I think it saved it as an Apple Pro Res 422 format instead. The disc image file format will not allow
    Toast 11 to create menus etc.  Thanks for your help.

  • Urgent!!  Problems muxing .m2v files and audio!! MPEG Streamclip/Compressor

    Hello!
    I am under an urgent deadline to upload a short 6 min documentary clip for a client to review for screening this week. The footage was shot in 1080/60i HDV.
    Usually, I find the best quality and fastest way to do this is to export directly from my FCP sequence using the '150 min Best Quality' DVD settings in compressor to get an .m2v video file and .ac3 audio file. Then I open the .m2v files in MPEG Streamclip which links it with my .ac3 file, then do 'Export MPEG with MP-2 audio". This gives me a single, muxed file that I can then upload to YouTube or Vimeo.
    However, with this project, when I open up my .m2v file in MPEG Streamclip, it's recognizing the .ac3 file and I can see the info for it in the MPEG Streamclip window, but when I play the file in MPEG Streamclip or mux it, I don't hear any audio. Furthermore, after about 5 seconds into the clip, the playhead will continue moving, but the video will freeze, then maybe pick up again later. The .m2v video will play back smoothly in VLC player or Quicktime player, but not in MPEG Streamclip.
    I've tried exporting different little sections of the timeline to see if maybe I had some corrupted footage or whatnot. I even exported a small clip from an older HDV project to test. But no matter where I export from, I am running into the same problem. I can bring the .m2v file and .ac3 file into DVD Studio Pro and burn a DVD with no problem, but I can't mux them. If I build the DVD file in DVD SP and try to open the .VOB file with MPEG Streamclip, I get the same problem. I even tried using a different software to mux (ffmpegX) but to no avail. When I try with ffmpegX, it either tells me I'm dropping frames, or if it works and it muxes it, when I open the MPEG file, it'll stutter at about 5 seconds in as well and I can't hear any audio, even though there is supposed to be audio in the muxed file.
    I think I might have updated my Quicktime a few days ago with the system update, and maybe updated a few other things, so I don't know if this has any bearing on the problems I'm running into. But I was able just a few days ago to export HDV 1080/60i using this workflow without any problems.
    I realize I have other export options, but this always seems to me to be the best quality and fastest way of doing it vs. encoding an H.264 which, on my machine is RIDICULOUSLY slow...I need to be uploading multiple versions of the cut to the client, and really need help! Thanks so much in advance!
    J

    what you want is an m2v program file. Export a reference copy from FCP (uncheck Make Movie Self Contained") That's very fast. Bring it into Compressor. In the settings panel find the MPEG-2 settings folder. Select Program Stream. Adjust to your liking and run. The audio and video will already be "muxed" when it's done and using compressor 3 you can set it to upload to YouTube, Mobile or similar sites.

  • Issue with length of file paths - Windows & C++ plugin

    Hello,
    I've got an issue that just popped up on my OCR plugin I've been working on that I suspect is related to the length of the filepath.
    I'm getting the following error that is being caught and logged when trying to open a file (filename changed for security purposes):
    Error Opening File: D:\aVeryLongFilePath.pdf
    Exception info: This file cannot be found.
    The entire string, including the D:\ part, is 266 characters long. I cut down the length of part of the path one by one and it was able to open and OCR the document when the length was 259 characters.
    I know there's a MAX_PATH variable in Windows and/or there's some kind of limitation for file length. Note that I can open the file in Acrobat using File->Open and run OCR on it individually using the built-in Recognize Text function, but if I try to Recognize Text for Multiple files and choose "Add Folders", the file in question doesn't show up in the list of files to be batch OCR'd (even though it is there). Interestingly, choosing "Add Files" from the Recognize Text->In Multiple Files does work. So Acrobat itself has at least some issues opening the file using some of it's features.
    Here's how I'm opening the document:
         string pn;               // assume this is initialized, I'm just putting this here to demonstrate what type it is
         pathName = pn;
         ASAtom pathType = ASAtomFromString("Cstring");
         asPathName = ASFileSysCreatePathName(ASGetDefaultFileSys(), pathType, pn.c_str(), NULL);    
         pdDoc = PDDocOpen(asPathName, ASGetDefaultFileSys(), NULL, true);
    Is there a way around this problem?
    Thanks.

    Yes, you are hitting the MAX_PATH on certain versions of Windows.   The only workaround would be to see that the file is "a very long path" and then break up the pathname construction into multiple pieces (perhaps the containing directory and then the file itself).  The other option is don't use Cstring to construct, use the Unicode variant.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Mon, 7 Nov 2011 15:43:33 -0800
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: Issue with length of file paths - Windows &amp; C++ plugin
    Issue with length of file paths - Windows & C++ plugin
    created by zephed56<http://forums.adobe.com/people/zephed56> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4012710#4012710

  • Issue with opening .PDF files after recalling from Symantec Enterprise Vault

    Good Morning,
    I am having issues with opening PDF files that have been recalled from Symantec Enterprise Vault and some of the files are anywhere from 3-4 years old.  Some files open, while others return the error: Adobe Reader could not open filename.pdf because it is not a supported file type or might have been damaged.  It is inconsistent as to which files it occurs with.  I am not ready to believe that I have that many corrupt files out there.  I am opening them on a Windows 7 Enterprise SP1 x64 desktop. Adobe 10.1.7. I have already configured the registry setting for bValidateBytesBeforeHeader that I found in another article to no avail.
    The files are on a network share, but I also tried copying them to my local desktop and still received the error.
    I have seen other posts regarding this error, but do not see a definitive solution and am hoping that in recent days someone has come up with a solution.
    Thank You
    Brian Dougherty

    Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
    Might have been damaged is pretty cut and dried in its meaning and interpretation.
    There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
    You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

  • Issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4

    Since upgrading to the final version of OS X 10.10 Yoesemite I have issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4. I don't recall their being any issues while I went through the Beta testing process.  The Adobe products (PSE and PE) give me a configuration message "error 16" and it tells me to uninstall and reinstall. I have done this a few times/  It seems to go through the whole install process until the startup where it crashes.  I downloaded PSE 11 and at least it starts up but I haven't used it to do anything.  Also DiskWarrior 4.4 does not load up from the hard drive anymore (error message) and when I boot it up from disk is doesn't give me the option of correcting permission when repairing files and folders.
    At lease all of otheother software including Photoshop Lightroom 5.6 seem to be working.
    Very sad

    Barbara,
    Yes, I accessed the "updates" menu from the Help pull-down menu.  I also accessed the updates using the Mac Terminal application with results shown in my original post.  Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
    Update Failed
       Updates could not be applied
       The error log file may help you in identifying the problem.  The, try updating again.  If the problems persist, contact customer support for further assistance.
      The error log file read as follows:
       Photoshop Camera Raw 8.5
       There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
       Looking at the the output of the Mac Terminal app, it shows:
       ... hdiutil: attach failed - no mountable file systems
       Is this relevant?
    Regarding your follow-up message pointing to:
    Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
    the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
    Thanks

  • Are there any issues with Adobe Photoshop CS5 and OS X Yosemite 10.10?

    Are there any known issues with Adobe Photoshop CS5 and OS X Yosemite 10.10? I heard I would need an older Java version to start it.
    [ spammy links removed by admin ]

    You'll need to reinstall Photoshop CS5 after installing the MacOS 10.10 update -- for some reason the OS updater stomps on some of the Photoshop files.

  • Compatibility issues with Final Cut Express and Final Cut Pro

    I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
    If I transfer project files from one platform to the other will i run into any issues?
    Thanks for all and any help.

    {quote:title=cuttingedge wrote:}
    If I transfer project files from one platform to the other will i run into any issues?
    {quote}
    Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

    Greetings everybody,
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
    On this particular product, the product variants are supposed to work in such a way where:
    If you select the value "1/8" from the "Choose Ribbon Width" field
    THEN
    The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
    I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
    Thank you very much for your time and help!

    Hi...
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
    At the top of this window you'll see the following:
    Apple Support Communities > Mac OS & System Software > Safari > Discussions
    This the Safari forum for the Mac OS X.
    Better that you post your topic here  > Developer Forums: Apple Support Communities
    I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

  • With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

    With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

    The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
    I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
    You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
    Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper.

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • Sync issues with iPhone 6 Plus and iTunes

    I'm having issues with syncing my iPhone and iTunes.
    I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
    Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied).  The longest this has occurred for is 2hrs.  After this time I have stopped the sync and ejected my iPhone.
    I had another issue with my phone when playing music.  When going to play music, I was given the error message saying that the song could not be found.  I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'.  I found the song and could see that next to the song was a small what looked like dotted grey circle.  After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song.  I did this and this was when the issue occurred again.
    I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again.  This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone'  tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play.  All played ok.
    I have read lots in the Apple forums about lost of difference reason this may be happening.  Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it.  My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
    I all so had this issue with my old iPhone 4S.  The problem occurred when running iOS 7 and 8 on the 4S.  When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app.  However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
    I am in contact with Apple Care, but this is such a long process. 
    So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful.   Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
    I will update my post with any information provided by Apple Care as and when I get it.
    Thanks for reading and thanks for your time.
    Mark. 

    Hi,
    Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
    Firstly I just want to updated my details about what version of Mavericks I'm running.  I'm running 10.9.5 - I put the wrong version down in my original post.
    So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
    I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices. 
    The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem.  For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD,  this was added and encoded with the version of iTunes that was running at the time of adding the music.  So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
    At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version.  However, due to the amount of music that I have, this is going to take a long time.  When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone.  This may just have been luck though at that time.
    Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on.  The only down side to this fix as far as I can see at the moment, is  that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
    I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
    Thank you all for your comments.

Maybe you are looking for