Issue with heat maps refresh process in EID 3.1?

Issue with Heat Maps in EID 3.1? Heats maps don't refresh unless you go back to home page and then again go back to the Endeca app.
In Oracle Sample app if we open the Map tab we will see that Milwaukee is really hot in the heat map. now if we filter the data to just show data from 100 miles within Orlando, FL then the map will get refreshed to show that area but the colors on heat maps do not change.
Now if we keep the refinements same and go back to home page and again go back to sample app and maps tabs then it will still show area of 100 miles within Orlando, FL which is good but now heat map would have updated and it would show us correct color.
Now if we remove the refinement then it would show complete US map as hot which is again wrong.
I have observed this issue in chrome browser as well as firefox.
Is there anyway to overcome this issue?

This issue was resolved after applying latest patch from Oracle.

Similar Messages

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • Issues with Infoview data refresh on Crystal Reports based on BW BeX query

    Hi all,
    We applied the Business Objects XI3.1 fix pack 3.1 with Integration toolkit fix pack 3.1 in our environment.
    After that we started having trouble with Crystal Reports based on BeX queries that use manual input variables.
    The data refresh would not work in Infoview.
    The data refresh would work using the Crystal Reports designer gui on local machine.
    regards,
    Abhishek

    Hi all,
    This thread is for the benefit of all the BW/BO people who faced issues with BO reports not working after certain fix pack installations.
    After lot of time spent in debugging this and researching and some help from SAP, we found that BASIS had missed a step in the BO patching. This step was relating to applying some BW transports in the BW system related to the new Integration toolkit.
    Please use below notes for the BW transport task of patching BOE Integration toolkit.
    Refer to Note#1472104 which explains about loading the
    transports when we install BO Service Packs or Fix Packs. Also please refer to the Note#1271751 for the advice on transports for BW systems.
    Please go through page 206 (Configuring transports) in the SAP Integration Kit installation guide. You can download this document at below link.
    https://websmp106.sap-ag.de/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf
    Refer to Note#1345919 which explains about the process of loading transports for SAP IK.
    regards,
    Abhishek

  • Issue with RFBIBL00 batch input processing

    Hello ABAP Experts,
    I am having issue with a speed of batch input session processing.  If you can please help me resolve the issue.
    I have a requirement to post liquidation document to clear open vendor down payment items and then to clear vendor invoice with liquidation.  I have created a custom program to address this requirement where it uses the SAP program and Call Transaction.
    For liquidation document posting, I am using the program RFBIBL00.  The custom program has steps:
    1.  Submit RFBIBL00 via job to create batch input session
    2.  Close job
    3.  Submit RSBDCSUB via job to process batch input session
    4.  Close job
    5.  Wait for 15 seconds
    6.  Read job log to get liquidation document number
    7.  If no document posted then display error
    The issue is when the job log is read it says u2018Session 10zrsbdcsubxxxxxxx is being processed by user   in mode   on serveru2019 and there is no error message or no document number with message number 312.  So the program displays error message, stops and cannot perform the second step. If I check in the system after a couple of minutes I find the document posted. I also increased the wait time.  But the first record processing always takes longer and the program finds as a failure.  The program can process next several records with success.
    I am looking for expert help if you please suggest how to resolve this.
    Thanks & Regards.
    Yashasvi

    Hi,
    Have you tried calling FM DEQUEUE_ALL before/after schedulling job?
    Gouri.

  • Special characters issue with Nokia Maps on N95

    Hi there,
    when using Navigation in conjunction with Nokia Maps on my N95, all streets and towns which contain any special character in their name (for example: é, è, ü, ä, ö, etc…) do appear as unreadable garbage on the screen of the N95.
    I only noticed the problem after having purchased the 3 years license Navigation upgrade (EUR 99.99) and immediately notified Nokia. That was back in October. Since then I have called them at least 10 times and ultimately I have asked for a refund as no solution is still available.
    In all these calls with Nokia, the only reasonable argument I heard was that maybe (!!!) the new software update version 20.0.015 released back at the end of November could solve the issue. Unfortunately, for my phone (which is a branded one) the update is not yet available.
    Today, after calling them again, I was told that Nokia’s policies do not foresee refunds and therefore my request has been rejected. I was told to bring my phone to a Nokia Store and see if they can help me (I don’t see how). I was also told that maybe I would have to send-in the phone for repair.
    This is soooo frustrating that despite the 3 months of patience and all the money spent for the N95 (not quite cheap), the navigation upgrade and the phone calls to Nokia, I still have the same issue. I will probably end up filing a complaint with a monthly consumer’s magazine in the hope they will publish my story.
    After all, it may not even be Nokia’s fault but rather the guys who are responsible for the maps, but if Nokia accepts to have a commercial venture with a vendor, than they also accept liability for the joint product. And by turning down my legitimate request for refund, they have proven not to give a **bleep** about people like you and me.
    Forgive me for the long post - needed to release some of the frustration...

    I have been using an N95-8GB since Nov.'07. From my experience with this phone that has a built-in mass memory besides the phone memory. I had trouble retrieving some of the softwares I have installed. For eg. I have saved some themes in the mass memory & I could not find it when I want to delete it. There are some 3rd parties games software inside where I cannot even delete
    This is what I don't like about the phone. I have bought an N82/Black recently as it uses an external memory card.
    Coming back to Nokia maps. Personnaly, I don't think they are that good & I have problem downloading it into my phone from my PC after having downloaded it from Nokia.
    By the way the Nokia map is not even the latest map 2.0. Is still a 1.0
    I used Navfone map software & it works OK in the 8GB. You have to purchase it.
    I have used a couple of N-series phones in the past ie. N-90, N-70, N-71, N-73, N-80/Black, N95, N-95/8GB & now N-82.
    Common with all N-series phones. After you have disconnected when you are done with your call you have to wait for a while before the word "disconnected" disappears.
    The more features it has, the more problem you are gonna to encounter.
    Unless you want to download softwares into your phone & have a good camera thats where the N series phones come in.
    For normal usage, a 40 series phone will suffice.

  • Has anyone had issues with Planning security refreshing in Essbase

    I am on Planning version 9.3.0.1 and we are having issues with planning users being able to use an essbase connection to pull data from smartview. They are able to see data in web forms in planning but they get #no access when they try to connect to the same data in smartview.
    Has anyone else experieced this issue.

    If user works when you provision individually its because they were set in the environment in EAS.
    group has to have all the access needed (bug in orig). css file open a ticket for the file name. example user needs calc access you setup calc but bug in system is not also giving user read and write access. Thus you can individually add this to the group in provisioning area in shared services. in EAS goto File open- editors create/run script with
    alter user 'userID' Add application_access_type Planning;
    alter user 'userID' add application_access_type Essbase; to add user to the environment if error you need to refresh eas first then run maxl script for planning you also need to go to workspace and select any of your dimensions all your groups ...edit .. migrate identities.. to get group/Users in planning wether adding or removing users. when you do planning changes you need to do database and security filters refresh.

  • FDM: Issues with importing mapping using excel files

    Hi All,
    I am trying to map ICP Entries using an excel file.
    I have made 2 mapping (explicit) entries, manually and exported it in Excel and then added all the Mappings in the same file, in proper format. when I am importing, I am not getting any error but the mapping is not getting updated and the new entries are also not getting added. so Ideally no Change in the tDatamap table.
    Environment details: FDM Version 11.1.1.3 is getting used. Target App is Essbase 11.1.1.3. able to connect to Essbase, no issues with connectivity.
    Has anyone face this issue.

    The section of the admin guide I reference will tell you how to create a properly formatted excel workbook. Import XLS will work if the excel workbook is set up properly. The import XLS functionality will not change existing records, only add new ones.
    Your template requires that the first cell is the table name. The second row is the table field names and rows 3 through X are the values to be inserted into the table. The named range beginning with UPS needs to highlight all of these rows and columns.
    Quite honestly, if you take the time to review the admin guide, I'm sure you'll find the answer that you need. Please understand that, like you, most of us that post on this board are consultants. We share knowledge to help the community better utilize the product. It's frustrating to hear that none of the answers that I previously provided you were at all helpful.
    Edited by: TonyScalese on Nov 30, 2010 3:23 PM

  • Ipsec Stateful Failover issue with Dynamic-Map

    Hi all, I have an issue with a couple of Cisco ISR 2921 in Ha Ipsec Stateful Failover configuration.
    With static crypto-map, stateful works good, Ipsec sessions are correctly trasmitted from Cisco Active router to Cisco Standby router.
    With dynamic-map and profile, stateful fails, Ipsec sessions are not correctly trasmitted from Cisco Active router to Cisco Standby router.
    I tried different IOS version:152-1.T3, 152-3.T2 and 153-1.T but I have the same behavior.
    Could you help me?
    Marco

    Yes it is supported. It is supprted on VAM, VMA2, VAM2+.

  • Issue with Sender Side JDBC processing

    Hello,
    I am facing some problem with Sender Side JDBC Processing.
    I am polling the DB MY SQL Server 2000 and using some SELECT statement i picked up some data and updated the DB with an UPDATE statement. At the receiver side i am using RFC adapter which takes the data from the DB and process further to SAP system.
    At sender side , i can see that the DB has been updated but in Integration Engine / Adapter Engine i could see any message related to that. So now my question is where did the message go.
    Can you please provide the inputs.
    THanks,
    Soorya

    Hi Surya,
    as u mentioned that u r unable to see ur message in IE & Adapter enigne
    pls do chk with the DB connections with XI and make sure that u choose every thing under same name space
    pls try to refersh cache
    thanx
    Sampath

  • Issue with color profile image processing

    Their seems to an issue with the iPhone displaying an image which has a Color profile of: Generic HDR Profile. The image appears very dark and nearly unviewable. This has been frustrating to trouble shoot becasue the image will display correctly on the computer, but when it is viewed on the iPhone it looks completely different. When images have other color profiles such as sRGB the images will look the same on both platforms. When an image has a Generic HDR color profile it will not display correctly on the iPhone. 
    Anyone else come across this problem?

    When PSE gets weird, the first thing to do is to reset the preferences. Go to the editor preferences>general, click this button and restart the editor:

  • Issue with challan mapping

    Hi All,
    During challan mapping, while executing the 4th step (I.e; futher processing) normally on the right side of the screen which is for Tax Deduction Details table, all the employees mapped will be displayed.  But in my case that entire coloum is empty. could anyone help me with this issue?  Also the following note is not implemented yet.  please advice if this is required:
    Note 1580248 - SAP_HR CLC - IN 2011 (Legal changes for Form 16 FY 2010-11)
    regards,
    Ayyaps
    Edited by: Ayyaps sukumar on May 17, 2011 12:04 PM

    HI,
    Please make sure your current SP level should be 66 and applied the following notes
    a) 1528165
    b) 1546949
    c) 1520182
    d) 1566288
    e) 1568324
    f) 1573538
    g) 1576504
    h) 1573538
    i) 1571048
    j) 1580476
    Also, make sure, feature 40ECC & 40ACK are maintained.
    Regards

  • HP Officejet 4500 Wireless Printing Issues with Online Maps & Financial Institutions

    I have an HP Officejet 4500 Wireless printer that I have wireless connection to my HP G72 Laptop running Windows 7 (64 bit) with Internet Explorer 9.  I am having trouble printing online maps from either Bing Maps or Google Maps.  It seems the print jobs get stuck in the print que and always show an indefinite status of “Printing” in the que but never get printed.
    I’ve tested my other applications including Office 2010 and all other jobs seem to print just fine.  I do use the “Print” button located in each of the online Map sites (Bing, Google).  This is when the jobs get stuck.
    I do also have the HP Bing Bar installed with Smart Print.  The Smart Print feature seems to work with the online maps just fine (seems I’ll just use it instead).
    Another separate printing issue is that I can never get any of my online financial transactions to print from any of my online financial institutions with either the Internet 9 print features or the HP Bing Smart Print feature.  I can never get those to print (have to wait for the PDF statements to be available).
    Any ideas as to why I can print the maps or online financial transaction?  I get no error messages either.

     Hi,
    Please use the following tips/instructions to fix:
        http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Issue with user mapping and SAP reference system

    Hello Gurus,
    I have this strange system behaviour when preparing my system for single sign-on using user mapping.
    Case 1.
    In the user management property category, I have the following defined.
    Authentication Ticket Type - SAP Logon Ticket
    Logon Method - UIDPW
    User Mapping Fields  -
    User Mapping Type - admin, user
    In the alias editor, I defined the default alias as SAP_PRD
    Result= when I go to identity management to assign the reference system (the default alias - SAP_PRD)...I do not see the system alias there.
    Case 2:
    In the user management property category, I have the following defined
    Authentication Ticket Type - SAP Logon Ticket
    Logon Method - SAPLOGONTICKET
    User Mapping Fields  -
    User Mapping Type - admin, user 
    In the alias editor, I defined the default alias as SAP_DEV
    Result, when I go to the identity management to assign the refernce system (the default alias - SAP_DEV), I see it there.
    What might be my issue? Does it mean I can't assign SAP reference if I am using UIDPW as logon method?
    Please help me.

    Hi Mahesh,
    Thanks for the feedback. I am relatively new to EP...so please I won't mind if you can guide me on how to go about this.
    This is what I did...
    I chose System Administration > Permissions
    In the PCD, I located my system with the alias, SAP_PRD
    It opened up the permission assignment area.
    Now I have these permissions set
    Administrator - Full Control
    Administrators - Full control
    com.sap.caf.eu.gp.roles.superuser - Full control
    Everyone (built in group) - Full control
    Everyone (Everyone role)- Full control
    super_admin_role - Owner
    For all the above End User box is checked.
    I can't find anyone end user group .
    Once I pick UIDPW, the alias disapperars from the reference system list.
    Please help.

  • Issue with java mapping in a multi-mapping scenario

    Hi
        We have  a 1:n multiple mapping scenario in XI and the source is R3 proxy and target side is files. So, creating multiple file from a single message from R3 .
    R3 --> XI --> Multiple files
    Structure of the output of the multi-mapping is
    - <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
    - <ns0:Message1>
    <Transaction>
    </Transaction>
    <Transaction>
    </Transaction></ns0:Message1>
    </ns0:Messages>
    wherein each Transaction node represents a file.
    Now, we need to introduce a constant /string like
    <!DOCTYPE Transaction PUBLIC \"-//XXXXXX//DTD BatchReceiptAuthorization//EN\" \"http://dtd.XXXXXXX.com/dtds/ReceiptAuthorization.dtd\">
    on each of the files at the very beginning - i.e within each transaction node , in the above structure, we need the above DTD string to be written.  To do this, we added a java mapping as the second mapping after the message mapping that creates this string. Is this the right approach and would it produce what we are expecting ?
    import java.io.BufferedReader;
    import java.io.InputStream;
    import java.io.InputStreamReader;
    import java.io.OutputStream;
    import java.util.Map;
    import com.sap.aii.mapping.api.StreamTransformation;
    import com.sap.aii.mapping.api.StreamTransformationException;
    import com.sap.aii.mapping.api.StreamTransformationConstants;
    import com.sap.aii.mapping.api.DynamicConfiguration;
    import com.sap.aii.mapping.api.AbstractTrace;
    public class ModifyRootAndDelay implements StreamTransformation {
         AbstractTrace myTrace;
    public void execute(InputStream input, OutputStream output) throws StreamTransformationException {
              try{
                   BufferedReader reader = new BufferedReader(new InputStreamReader(input));
                   String NameSpacePrefix = "<!DOCTYPE Transaction PUBLIC \"-//innotrac//DTD BatchReceiptAuthorization//EN\" \"http://dtd.innotrac.com/dtds/ReceiptAuthorization.dtd\">";
                   String sLine = null;
                   StringBuffer XmlMsg= new StringBuffer();
                   String Result,PayloadBody;
                   int indexOfFirst;
                   while ((sLine = reader.readLine()) != null) {
                        XmlMsg.append(sLine);
                   String StartingTag = XmlMsg.toString();
                   indexOfFirst = StartingTag.indexOf("<MerchantID>") ;
                   PayloadBody=new String(XmlMsg.substring(indexOfFirst));
                   Result=NameSpacePrefix.concat(PayloadBody);
                   output.write(Result.getBytes());
              /*     Thread.sleep(200000); */
              }catch(Exception e){
                   myTrace.addWarning("Exception raised in the JavaMapping:modifyNamespace.java""\n The Exception Message: " e.getMessage());
                   throw new RuntimeException(e.getMessage()) ;
            }     public void setParameter(Map param) {
              myTrace = (AbstractTrace) param
                        .get(StreamTransformationConstants.MAPPING_TRACE);

    Hi XI Gurus
                       In my scenario, I sent the inputstream that is being passed to the Java execute method - to trace and I see that the whole of the xml file - as shown below  - which is the output of message mapping ( from the first mapping step ) in sent to the execute method of the java mapping a single call
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
    <ns0:Message1>
    <Transaction> </Transaction>
    <Transaction> </Transaction>
    </ns0:Message1>
    <ns0:Messages>
    So, I modified Java mapping program to look for multiple occurences of <Transaction> tag and prefix them with my constant DTD Literal - which is the primary reason , why I had to use Java mappings after the message mapping.
    Now, I get an error is XI- SXMB_MONI
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING" />
      <SAP:P1>unexpected symbol; expected '<', '</', entity refe</SAP:P1>
      <SAP:P2>rence, character data, CDATA section, processing i</SAP:P2>
      <SAP:P3>0</SAP:P3>
      <SAP:P4>113</SAP:P4>
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>The exception occurred (program: CL_XMS_MAIN===================CP, include CL_XMS_MAIN===================CM00A, line: 609)</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Should I create multiple outputs - as many as the numberof target split files ( of type outputstream ) from the execute method in the java program ?

  • Issue with Transporting Mapping

    Hi,
    There is a strange issue that we are facing while importing a mapping from one PI server to another.
    Source PI server : PI 7.1
    Target PI server : PI 7.1 EHP1
    For the first time the softwarecomponent was import successfully. However eventually there were certain changes in the mapping and the mapping was transported to the target system.
    While doing so we encountered an issue stating :-
    The source structure, target structure, or a function library has been changed or could not be
    found in the Enterprise Services Repository. The mapping definition contains elements or attributes
    that does not exist in the changed structure, or function that were changed in a function library.
    The relevant entries will be deleted
    calculate122222222222222 function not found
           Signature of field  'a'  has changed
           Signature of field  'b'  has changed
           Signature of field  'c'  has changed
    Howerever there is no such udf in the original software component. Also there is no Udf with name calculate.
    There is no common udf for all the 3 target fields as well.
    There is only an RFC lookup that is common among the 3 fields, but without any field 'calculate'
    Kindly advice in case anyone has encountered such an issue.
    Regards,
                Milan Thaker

    > calculate122222222222222 function not found
    This is a default name, when the function is not found. You don't find the real function name in the error message.
    If you use a standard function and this is no longer available after import -> OSS ticket.
    If it is a global UDF, import it before the mapping.

Maybe you are looking for