Issue with HP 4225 officejet , Not accepting New Print Cartridge

dear Sir,
My HP officejet 4225 all in one is not accepting the New cartridge ( black 27b). From last few days i am experincing horrible things in printer which i m not able to understand, like from two three days it takes 15 minutes to print one page.
it starts printing ,prints one line and stop, wait for 1 min again prints few lines again become silent.in this way it takes 10 mins to print one normal page.
Yesterday it starts displaying error message "Remove and check right cartridge".I checked it ,cleaned the surface of black catridge (27b)but nothing happen.i installed an old empty catrdige (27b) it started working again. i replaced it with the existing cartridge it displays the same message.
Today I bought a new cartridge ( 27b) after instaaling it again display the same error message. I replaced with another very old cartridge (27) it again works ,it just displays black cartridge Empty.
now i m surprised a running printer suddenly not accepting the installed cartridge. accepting the old cartridges not accepting new cartridge.
one more thing the speed of printing has become normal after this incidence. I did a facory reset two days ago to check wether speed of printing improves or not? but it didnot improved however with the issue of cartridges ,when using old crtrdige (27b, 27) using only colour printout the printing speed is ok. i,e it does not start and stop.
pls help with this issue . i m totally stuck.
Thanking you,
Rahul Vijay

Oh, I don't think you are stuck with USB. From your post above:
When I select network, I get three options:
View Network settings
Restore Network Defaults
Advanced
With the Ethernet unplugged, select the middle one. Then reset your router by removing its power for a few seconds, then plug back in. Turn the printer off then back on.
Finally, plug in the Ethernet cable.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

HP Laserjet P1006 Can not get new print cartridge into printer.

HP Laserjet P1006 Can not get new print cartridge into printer. Received two new cartridges from HP. CB435A, 35A are correct numbers for replacement but round part on left side appears too large for channel provided. I can not get the old cartridge back into the printer either. What am I doing wrong.

Hi,
Please use the following instructions to fix:
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
For MAC filter, you have to logon to the router to see.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Print issue with 6.2.9, not able to print a document(Not greyscale)

I am now unable to print a document unless I change the text colour and print from the preview screen.( can print from other apps using my Canon Pixma 4000)
i.e. I cannot print a black text document. It runs through the printer as if it is printing but the page comes out blank.
If I change the colour of the text then it prints
Anyone know how to fix this please.
Thanks
Shirley

Hi Shirley,
I think you've (probably accidently) changed a printer setting. Canon Pixmas offer you the choice of printing with only the black cartridge or only the colour, which allows you to operate the printer even when one cartridge runs out of ink.
To get to the setting, open the Print Center, select your printer from the list, then click the tools icon (labelled Configure or Utility, depending on the Print Center version).
This will open Canon's Printer Utility application. Again, select your printer in the list, then click Maintenance.
In the Maintenance window, use the popup menu at the top to select Ink Cartridge Settings.
In the Settings window, select Both black and color using the popup menu.
Close the window and quit the Printer Utility and Print Center.
Regards,
Barry

ICloud now insisting on previous Apple id. Cannot log in. Will not accept new id and emails old id – a closed email account – with info. How do I fix?

iCloud now insisting on previous Apple id. Cannot log in.
Will not accept new id and emails old id – a closed email account – with info. How do I fix?

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. You can now use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. Then you can go back to https://appleid.apple.com and change your ID back to the way it was.

Icloud does not accept new Apple ID. What can I do to get it to accept.

Icloud does not accept new Apple ID. What can I do to get it to accept.

Please try logging in with your current Apple ID here in order to test: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US
If your new ID doesn't work try logging in with your old details as maybe the change didn't work as first thought?
Regards,
Steve

TS4212 why my computer is not accepting new latest version ? 10.6 version i have macbook i have apple software cd

why my computer is not accepting new latest version 10.6 i have apple cd new latest version cd why is showing me mac
ox cannot be installed to this computer ? please help me

You can't use a disk which originally shipped with a Mac on a different Mac model. You also can't install Mac OS X 10.6 on a PowerPC Mac.
(67906)

Issue with ARD 3.0 not pushing out Installs, Says its installing but not

Issue with ARD 3.0 not pushing out Installs, Says its installing but not
Has anyone seen this. It seems to happen with ARD 3, have not seen this in ARD 2.
I go to the Install Packages on Target Computers, put in: 10.4.7 Combo (for the correct CPU, PPC or Intel), security updates, QT 7.1.2, etc.
Push it to Macs I can connect to, observe and control.
The progress bar copies the files (in some instances it does not) and then it just hangs there, bar does not move, Installs never finish, not good, very odd.

Is it the same clients that have the problem every time? Are those clients doing anything cpu intensive? Have you tried rebooting the affected clients?
Maybe try a smaller package on those clients.

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Ipad will not accept new version of itunes

ipad will not accept new version of itunes

What version of iTunes are you trying to install. If its 10.6.3 or 10.7, those versions are installed on a computer, not the iPad.
 Cheers, Tom

I am having issue with iphone 5 bluetooth , not able to connect honda CRV

I am having issue with iphone 5 bluetooth , not able to connect to my honda CRV

Don't know if you could consider this an Apple issue. I know you are probably frustrated, and I am not defending Apple here, just saying that the iPhone does not update to support individual automobiles, the automobile manufactures update to support the Bluetooth profiles.The iPhone has the latest Bluetooth stack and supports a number of things. Problems generally revolve around the manufacturer not supporting the lastest Bluetooth version and have to update their systems. Check with Honda, they are probably aware of this, and if you search the forum, you will find a number of posts regarding the CR-V.

Is anyone having issues with imessages disappearing or not being delivered?

Is anyone having issues with imessages disappearing or not being delivered?

I too am experiencing this on my iPhone 4 after upgrading to 4.3.3. I am fairly convinced that it is a software issue. The last update seems jumpy. There appear to be more pauses and stuttering with screen changes too. Sometime the button operates perfectely (even with repeated light touches). Other times, it doesn't matter how hard I press; it takes several presses. I notice it more when i am using a battery case or connected to an AT&T MicroCell. I am having a hard time pinpointing problematic apps, although i suspect that mail with my work Exchange account may be a culprit. I suggest posting your issues on Apple's iPhone feedback page, www.apple.com/feedback/iPhone.html, to ensure that they are looking into this problem. If it is a hardware issue, I'll be pretty upset as I received my iPhone 4 on day 1 of availability and it is out of warranty. Hoping for a fix with an update. Please post on the feedback page.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
<Personal Information Edited by Host>

لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

Ipad Facebook issues, under "settings" Facebook will not accept my password, nor will it delete the account. Have tried deleting the FB app and installing it again, have tried restarting ipad, any thoughts?

Ipad Facebook issues, under "settings" Facebook will not accept my password, nor will it delete the account. Have tried deleting the FB app and installing it again, have tried restarting ipad, any thoughts?

same problem SO FRUSTRATING

Printer won't accept new black cartridge

laser jet 2605dn does not accept new black cartridge

There are Black cartridges and Photo (black) that are not interchangable. Some further information that may help identifying the correct cartridge is shown here. Your B209a does not use a Photo cartridge, you need Black.
If you Contact HP they may exchange the Photo cartridges with Black.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Issue with HP 4225 officejet , Not accepting New Print Cartridge

Similar Messages

Maybe you are looking for