Issue with HtmlUnit Driver by using oracle extended selenium webdriver
Hi,
I need to run test case in silent mode i.e. silent playback.Thus, using HTMLUnit Web Driver which is available in oracle extended selenium binaries.
The recorded files works fine with firefox driver but when i converted my code to html unit driver, it failed to find link inside ADFTable of my fusion web application.
Is htmlunit driver which is in oracle extended selenium files compatible with ADF Application???
Is there any other approach for silent playback of ADF Application test cases other than headless and VM.
Please guide on this issue.
Regards,
Meera
*## After running csscan and csalter*
Did you really run csalter.plb? csalter.plb should not be run before a full-export A-to-B type of migration. On the other hand, if there were convertible data in the database, csalter.plb should have just reported an error and terminate without changing anything.
*## "[Oracle][ODBC]Syntax error or access violation"*
This error does not say much. Why do you think ODBC does no conversion?
The conversion for the ODBC driver is performed by OCI to/from UTF-16 and it is independent of the NLS_LANG character set. If the C++ application is written in the ANSI mode (does not use wide character data types), Microsoft ODBC Manager will convert between the application and the Oracle ODBC driver, between system code page (Cp 1252) and UTF-16.
-- Sergiusz
Similar Messages
-
im having issues with hard drive im trying to install football manager 2015 it reads disk for a few seconds then ejects itself other cds read fine
and have tried older versions of football manager and they dont read either
any help would be greatly appreciated
thanksTry resetting the SMC 2-3 times, if that does not work then the DVD may need cleaning. Get a dry cleaning kit from your local office supply store.
Intel iMac SMC and PRAM resets -
Install issue with CD drives / and burning
I am running Windows Vista 64 on a new computer I built (latest ASUS P5K-E with a quad Q6600 cpu and 4gigs of RAM). I transferred all my music and installed iTunes. Everything is working fine except for the burning of disks. It did give me a prompt at the end of the iTunes install and on first startup that there may be a problem recognizing the CD drives. However, there is no problem importing music on those CD/DVD burner drives -- but I cannot burn on those drivers. I can burn using other software on these drives -- no issues with the drives at all. Under iTunes "Preferences", and 'Burning' it states "No supported Disk burners found". Both are Lite-on CD/DVD burner drives and less than a year old -- and of course worked on the old XP computer with iTunes. I have uninstalled, reinstalled iTunes -- no luck. Any ideas? This looks to be something in the Registry on install, but not sure what to do. Any help appreciated.
You may need the CD Configuration folder too, after you install the drivers.
Here is the CD Configuration folder, with the Files you need Just Unzip it and place the CD Configuration Folder into Your C:\Program Files (x86)\iTunes Directory
http://stahlhammer89.com/apple/CD_Configuration.zip
I had my friend with Windows Vista x86 Install iTunes and give me the Folder and Files I needed.
Hope this helps you -
USB issues with External Drive
I am running a 1 TB Fantom drive (MDC1000) (2 Partitions) on new OS 10.5.6 MacPro via one of the back USB ports. Been using the drive for over a year with no problems.
Now intermittent issue with mounting drive. After successfully mounting and letting the drive cycle down, the USB2 connection disconnects when the drive starts back up again. I receive the Device Removal Message, then the drive tries to remount. Then I receive the message again. What is strange is that the drive seems to work fine when data is being accessed consistently.
I clicked off the "put the hard disc to sleep" checkbox in the Energy Saver preference which seemed to stabilize the intermittent problem, but now there is an issue with the machine not coming out of sleep, and I get the startup clock icon when I try to restart. The machine does not shut down with the USB connected.
I'm still trying to determine if it's the drive or the machine. I ran the disc utility and repaired the disc as the intermittent disconnections seem to corrupt the trees and directories. I am able to fix them. Is there any utility for testing the USB ports? There should BE.
Could this be due to a recent update? Or lack of firmware update from the drive manufacturer? Seemed to come out of nowhere.
Thanks for any info.
Message was edited by: jfc999Just to follow up with this for anyone has a similar problem.
Tried new cables and seemed better for a short time, but then still would not mount successfully.
I called Micronet after I didn't hear back via their email form. The tech there seemed to suspect it was the power connection on the network card in the drive which would make some sense. He confirmed there were no firmware upgrades for the Fantom drive.
Also tried to mount the drive unsuccessfully via Firewire and it did not work.
So my conclusion is that it's not the drive mechanism but the network card in the drive. I have a sinking suspicion that there is a power issue in my office space, which may have affected the drive. I've had other machines and devices which have had power issues in the past.
Does anyone know any simple and easy way to test electrical integrity in a work/office environment?
I bought another 2tb drive, transferred the data and reformatted the old drive to see if that does anything. -
Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCPHere's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP -
I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?
Hi miffyzoo,
If you are having bluetooth pairing issues with your iPhone and your Mac, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden -
Problems with Drive Mapping using Oracle Drive
It seems as though we are having some trouble with oracle drive. The install was a piece of cake, as was the configuration. The problem arises when at times we connect with the proper credentials, Oracle Drive logs the user in, but then the appropriate drive does not map. Nothing shows up under "My computer". The window will launch for the user to use Oracle Drive, but they get error messages including, "Cannot support long file names." (AKA, anything longer than 8 characters).
Has anyone else come across these issues? Any ideas how to resolve. The issues we get with the long file names seem to only be when the drive doesn't properly map.
Any thoughts would be helpful.
Also, I have heard rumors of a Production version of Oracle Drive. Anyone have some news on that?We are very pleased to announce the Production Release 10.1.2.0 of Oracle Drive.
You can download the software from here:
http://www.oracle.com/technology/software/products/cs/index.html
Note:
- This version is production for English only. Other languages are Beta.
- Oracle Drive 10.1.2.1 for ALL languages is expected soon.
Find more information on Installation and Configuration as well as a Viewlet that shows Oracle Drive in Action here:
http://www.oracle.com/technology/products/ias/portal/content_management_10gr2.html
regards,
Christian -
I recently started experiencing memory issues with my iMac due to One Drive using up to 5GB of my iMac memory (total of 8GB). Every time I start up my iMac Activity Monitor shows One Drive uses around 4-5Gb of the internal memory for no reason. Previously Onde Drive seemed to work fine, it's only since about 2 weeks I notice this. It's really annoying as the iMac freezes up regulalrly and I need One Drive to synchronise my files across different devices.
Has anyone experienced this too and are there any known fixes?Yes this is happening to me too, since the last upgrade. Eventually MacOS starts insisting I "Force Quit" all my applications as I have run out of application memory.
OneDrive doesn't appear in that list because it's not an application... but Activity Monotor clearly shows it's the culprit, taking up 5GB+ of RAM.
I've raised the issue on Microsoft's forums:
http://answers.microsoft.com/en-us/onedrive/forum/sdperformance-sdother/onedrive -for-macos-memory-leak/fe04cf60-949f-47b6-b886-10539b5c5cc3?tm=1397636232934 -
IMac goes to sleep unexpectedly, Finder issues with flash drives - related?
My iMac falls asleep for no known reason, often in the middle of active use. (Similar problem recently described in thread with messageID=11829917.)
Sleep onset is frequent but seems to vary based on both currently-running software and attached devices (particularly USB flash drives). It will almost always wake up when I hit the space bar afterward, but might sleep again within a minute or two, then not for an hour or more. The sleep occurs with little notice (brief stall of display, sometimes enough time to click on another app window and bring that forward before the screen goes dark), and 95% of the time the computer wakes up after hitting the spacebar. The other 5 % of the time the display reappears but the entire OS is frozen and usually requires unplugging the power cable. There are other symptoms in the Finder - more below. Once in a while the fan revs up like a WWII fighter plane taking off from a carrier, but this is unusual and all the really irritating stuff also happens without this symptom, which usually stops on its own. Immediately after reawakening error messages are displayed to report that flash drives were improperly disconnected (Tell me about it! This has been the case for several months whether the computer goes to sleep by itself or if I put it there manually.)
The computer seems to go into sleep mode most frequently when not-particularly-demanding graphics (Photoshop Elements and Adobe Reader) and video (QuickTime Pro 7.6.4) apps are running. Turning these off makes nod-offs less frequent but doesn't stop it entirely. When video thumbnails are displayed in Finder windows a lot of time may be required to load the data and this often paralyzes everything else AND this also seems to be a trigger for a nod-off (i.e. QuickTime not necessary to make the computer choke). This is highly variable and some video clips load quickly (< 20 sec), while others take several minutes, and this doesn't necessarily correlate with file size.
Another factor is whether flash drives are connected - these seem to make the nod-offs more frequent AND Finder regularly loses communication to these both while just sitting there and also in the middle of file transfers. A very early 250 MB drive (Lexar - vintage 2004) will always communicate, but different USB2-capable drives all are either unreliable (Lexar 8 GB and KData 4 GB both < 1 yr old) or apparently dead (Lexar 2 GB ~ 2 yr old). The failures may be damaging the drives - they are inconsistent-to-bad at communicating with my MacBook Pro. I know this sounds like the drives are at fault, but there are things which make me suspect the OS (both computers use the same version): 1) different flash drives display the same on-again-off-again behavior AND the 2) the 2 GB drive that hasn't communicated with my Macs in over a month has no trouble talking with my wife's WinXP computer. When communication isn't working with these drives, they do not show up in either Finder or Disk Utility. When the Mac-dead 2 GB Lexar is plugged into either computer and I launch Disk Utility, the initial scan for drives never finishes so I have to force quit. (When they are working, on the iMac the large drives only appear in Finder if I go to User and press Command-uparrow (to go up a directory layer) - in columns display mode nothing appears in the left-hand column.
(The following describes a set of problems I've had a little longer and which may or may not be related):
At times the Finder loses some but not all functions:
1) Sometimes files in the Trash can't be ejected* even when all apps are turned off
2) usually when problem 1) is observed, no keyboard commands work: nothing happens when pressing Command-W, Command-uparrow or Command-N to open a new window. Text typed will not be entered to change filenames (but this can still be done by typing the desired text in TextEdit, copying there and selecting and pasting with mouse commands.)
<* I have downloaded an app for forcing file deletion, but haven't really needed it - the delete option and keyboard commands all return after shutdown and reboot, and there's usually enough annoying stuff going on by this time that that seems the best thing to do.>
Things which I've tried to fix it with so far (not in this order):
- blowing dust out of the back with canned air
- checking temperatures - CPU/GPU showing 72/73, HD bay 51, etc.
- fixing permissions from normal boot
- boot from install disk and running extended hardware test (no problems found during scans repeated several times during the past month)
- fixing permissions and running Disk First Aid from install disk boot
- getting files off the hard drive (was as low as 3 GB free space, currently ~ 35 GB and climbing)
- clearing PRAM
- resetting system manager (name? - hold down power button when reconnecting power cable, etc.)
- Power Saver display and computer auto sleep are shut off (both on "never" - I regularly put it to sleep manually)
- virus scans (Clam XAV)
I realize that this is a kitchen sink collection of symptoms, but these things may be related and if so, OS developers may want to be sure these problems are avoided in current versions. (Yes I will upgrade my OS soon...)Thanks for checking in, Miriam - sorry to get testy about it.
The iMac's RAM is maxed out (2.5 GB)
Yes, the system log does report overtemp message to Power management prior to shutdown (today's log at end of post)
Where do I find normal temperatures for the system? What are the important parameters to watch and what sort of fixes are possible?
iStat currently shows:
HD 54° CPU 67° GPU 72° Incoming air 38° (???)
HD bay 54° GPU ambient 71° opt drive 49°
==========================================
Console.log was largely full of stuff about a bad flash drive I stuck in as a Hail Mary and failure of communication with a scanner (old HP, driver package installs a program which starts at launch which doesn't show up under Startup Items. Apparently the permission got mislaid, so I fixed permissions and this seems OK now. (Only included that because some of it shows up in System.log and it's not worth focusing on.)
[That all said, there is a software/OS component to the problem and it is graphics-related. The other night I was looking at some flash videos in a series and one in particular repeatedly caused shutdown, while others played normally: domain = jebhost.com /youtube/list.php?q=Henry+8.o&Submit=GO "The Tricycle Thief" only played through once out of about six tries.]
=========================================
System Log Aug 1 (last addition 20 minutes ago)
Aug 1 14:52:46 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
Aug 1 17:07:42 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x46c34c0)
Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x3827ec0)
Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
Aug 1 17:38:33 gerda-kilgores-imac-g5 kernel[0]: disk1s1: I/O error.
Aug 1 17:38:33 gerda-kilgores-imac-g5 diskarbitrationd[40]: unable to repair /dev/disk1s1 (status code 0x00000008).
Aug 1 17:38:41 gerda-kilgores-imac-g5 kernel[0]: USBF: 31965.839 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.868 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.901 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31967. 23 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:38:49 gerda-kilgores-imac-g5 kernel[0]: USBF: 31973.868 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31977.938 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31978. 2 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.506 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.571 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.264 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.329 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 31 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 64 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986.187 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.712 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.774 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:03 gerda-kilgores-imac-g5 kernel[0]: USBF: 31988.139 IOUSBCompositeDriver[0x46bea00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989. 55 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.178 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.204 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.479 IOUSBCompositeDriver[0x46bec00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.455 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.503 IOUSBCompositeDriver[0x36cb380](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
Aug 1 17:49:08 localhost kernel[0]: standard timeslicing quantum is 10000 us
Aug 1 17:49:08 localhost lookupd[43]: lookupd (version 369.8) starting - Sun Aug 1 17:49:08 2010
Aug 1 17:49:08 localhost kernel[0]: vmpagebootstrap: 633665 free pages
Aug 1 17:49:08 localhost memberd[41]: memberd starting up
Aug 1 17:49:08 localhost kernel[0]: migtable_maxdispl = 70
Aug 1 17:49:08 localhost kernel[0]: 92 prelinked modules
Aug 1 17:49:08 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Aug 1 17:49:08 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Aug 1 17:49:08 localhost kernel[0]: using 6553 buffer headers and 4096 cluster IO buffer headers
Aug 1 17:49:08 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Aug 1 17:49:08 localhost kernel[0]: DART enabled
Aug 1 17:49:08 localhost kernel[0]: USB caused wake event (EHCI)
Aug 1 17:49:08 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe261dcc; max speed s400.
Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::probe:
Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Aug 1 17:49:08 localhost kernel[0]: Security auditing service present
Aug 1 17:49:08 localhost kernel[0]: BSM auditing present
Aug 1 17:49:08 localhost kernel[0]: disabled
Aug 1 17:49:08 localhost kernel[0]: rooting via boot-uuid from /chosen: D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B
Aug 1 17:49:08 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Aug 1 17:49:08 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/WDC WD2500JS-40MVB1 Media/IOApplePartitionScheme/Untitled 3@3
Aug 1 17:49:08 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Aug 1 17:49:08 localhost kernel[0]: jnl: replay_journal: from: 2051072 to: 8100352 (joffset 0xa701000)
Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::stop
Aug 1 17:49:08 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Aug 1 17:49:08 localhost kernel[0]: AppleSMU::PMU vers = 0x000d0092, SPU vers = 0x56, SDB vers = 0x01,
Aug 1 17:49:08 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
Aug 1 17:49:08 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
Aug 1 17:49:08 localhost kernel[0]: Jettisoning kernel linker.
Aug 1 17:49:08 localhost kernel[0]: Resetting IOCatalogue.
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 0
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[33]: starting
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Aug 1 17:49:08 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Aug 1 17:49:08 localhost DirectoryService[46]: Launched version 2.1 (v353.6)
Aug 1 17:49:09 localhost kernel[0]: UniNEnet: Ethernet address 00:14:51:26:1d:cc
Aug 1 17:49:09 localhost diskarbitrationd[40]: disk0s3 hfs D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B HiMac /
Aug 1 17:49:09 localhost kernel[0]: AirPortPCI_MM: Ethernet address 00:14:51:7e:85:c0
Aug 1 17:49:09 localhost launchd: Server 3507 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
Aug 1 17:49:10 localhost usbmuxd[36]: usbmuxd-196 built for iTunesNineTwo on May 17 2010 at 13:53:51, running 32 bit
Aug 1 17:49:10 localhost lookupd[63]: lookupd (version 369.8) starting - Sun Aug 1 17:49:10 2010
Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
Aug 1 17:49:10 localhost configd[38]: initCardWithStoredPrefs failed.
Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
Aug 1 17:49:11 localhost kernel[0]: Registering For 802.11 Events
Aug 1 17:49:11 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Aug 1 17:49:12 localhost mDNSResponder: Adding browse domain local.
Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_A: vram [98000000:08000000]
Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_B: vram [98000000:08000000]
Aug 1 17:49:13 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Aug 1 17:49:14 localhost loginwindow[67]: Login Window Started Security Agent
Aug 1 17:49:18 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
Aug 1 17:49:20 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
Aug 1 17:49:20 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
Aug 1 17:49:23 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[63]: exited abnormally: Hangup
Aug 1 17:49:23 gerda-kilgores-imac-g5 lookupd[119]: lookupd (version 369.8) starting - Sun Aug 1 17:49:23 2010
Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
Aug 1 17:49:26 gerda-kilgores-imac-g5 configd[38]: target=enable-network: disabled
Aug 1 17:49:27 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
Aug 1 17:49:29 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.
Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::init(0x3587f00)
Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::free()
Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: IOSMUPwrController:: OverTemp notification
Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: Power Management received emergency overtemp signal. Going to sleep.
Aug 1 18:28:21 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
Aug 1 18:28:21 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[119]: exited abnormally: Hangup
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown complete
Aug 1 18:28:21 gerda-kilgores-imac-g5 /usr/sbin/AppleFileServer: AFPServer::AbnormalATListenerShutDown - clear listener
Aug 1 18:28:21 gerda-kilgores-imac-g5 lookupd[240]: lookupd (version 369.8) starting - Sun Aug 1 18:28:21 2010
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Sleep
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Wake
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: Wake event 0020
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: USB caused wake event (EHCI)
Aug 1 18:28:26 gerda-kilgores-imac-g5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
Aug 1 18:28:32 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
Aug 1 18:28:32 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
Aug 1 18:28:35 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[240]: exited abnormally: Hangup
Aug 1 18:28:35 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
Aug 1 18:28:35 gerda-kilgores-imac-g5 lookupd[249]: lookupd (version 369.8) starting - Sun Aug 1 18:28:35 2010
Aug 1 18:28:36 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
Aug 1 18:28:37 gerda-kilgores-imac-g5 mDNSResponder: Repeated transitions for interface en1 (192.168.1.2); delaying packets by 5 seconds
Aug 1 18:28:38 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
Aug 1 18:28:41 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1. -
I am running XP Pro with SP3 and all updates as well as all Bios updates with Lenovo.
I have an issue with my USB ports. Everytime I put a USB flash card in any slot I do get installation and driver installed correctly. But when I go to the Explorer I get "is not accessible" Then it says under that "The process cannot access the file because it is being used by another process" But when I leave the USB flash drive in the drive and reboot I am able to to access the drive. Any suggestions on this issue I am not sure if it was the Bios update or one of the XP udpates. Anyone else come accross this issue?
Thanks,
ScottWould you try this:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I don't know what you are looking at to determine space available. You need to do that by selecting the device's Desktop icon then press COMMAND-I to open the Get Info window. The capacity and available space will be displayed in the Get Info window. A portion of the device will be allocated for the RDB and directory, so some space will be shown as in use. -
Issues with UpdateAction and later using jbo:RowsetIterate
Hello -
I am putting together a BC4J/Struts web app and am having some issues
with using the oracle.jbo.html.struts11.actions.UpdateAction class.
I am trying to figure out the correct way to reset a row after validation exceptions
so that <jbo:RowsetIterate> doesn't blow up when it hits the row if the user doesn't fix the
data they entered in to pass validation.
Call the objects being update 'Accounts'.
Pass 1:
User changes account data in an edit page and submits.
Struts hands off control to an action that is a subclass of UpdateAction which invokes super.execute(...).
UpdateAction does its thing - catches the validation errors and sticks them in ActionErrors.
Control gets passed back to the edit page with the errors displayed.
This is expected. HOWEVER, if the user goes to a page that lists accounts (via <jbo:RowsetIterate>) it blows
up on the edited account because it tries to validate the row. So...
Pass 2:
After super.execute(...) check to see if any errors happened (by whether or not the forward returned indicated success).
If there were errors, refresh the row via:
BC4JContext context = BC4JContext.getContext(request);
Row row = context.getRow();
row.refresh(Row.REFRESH_WITH_DB_FORGET_CHANGES | Row.REFRESH_REMOVE_NEW_ROWS);
This works (not blowing up if user goes back to listing page) for emptying a mandatory field (JBO-27014)
but not for inserting too much data into a field (JBO-27010). I've tried this with REFRESH_UNDO_CHANGES as
well with the same results. So...
Pass 3:
Instead of refreshing the row in my update action, rollback the transaction via:
BC4JContext.getContext(request).getApplicationModule().getTransaction().rollback();
However this seems unnessary - I don't want to rollback the whole transaction just to undo changes to one row. Is there some better way to fix the issue?
Any suggestions?
Thanks,
-- ScottI don't know why either, but I'd love to fix it. Please install one of the debug packages (this looks like x86_64?):
http://dev.archlinux.org/~dreisner/kmod … pkg.tar.xz
http://dev.archlinux.org/~dreisner/kmod … pkg.tar.xz
Run 'gdb --args depmod 3.2.2-1-ARCH'. When it crashes, type 'bt full'. Post all that output here (either in code tags or on a paste service) -
Any suggestions on how to fix installation issues with iPhoto & iMovie on used Mac mini?
I bought a used, mid 2011, mac min. The selller deauthorized all his applications and resotred it to factory settings for me. When I received it, I added myself as an administrator and deleted the dummy user the seller had created after restoring the OS. The first thing I wanted to do was install applications I already have on my iMac (also running OSX Lion). It would not install iPhoto or iMovie. It said these applications were assigned to a different apple id, the previous owner. I decided to erase the hard drive and reinstall Lion myself. I ran into some snags (due to my internet connection) and had to use recovery thumb drive, but it worked.
I successfully re-installed Lion on the newly formatted hard drive.
I still cannot install iPhoto and iMovie. It just give me an error now. Couriously, it installed Garage Band just fine. I haven't had any other issues with other applications I purchased on my other iMac.
Anyone have any suggestions, besides purchasing iPhoto and iMovie on the mac mini?Ethernet cord connected to the router solved it. This is exactly what I had to do when I reinstalled the operating system. For some reason my wireless internet is highly inreliable. It drops out constantly. I've always had my iMac hard wired to the router, but I'll have to figure out a fix for this Mac mini. I can't have a 30ft ethernet cord running through the middle of my basement. Thanks.
-
Issue with Cross-Company code transactions and Extended Withholding tax
Hi Gurus,
I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
In the 2 company codes, one company code is setup for Withholding tax and other was not set.
While posting in FB50, I am getting the below message and system does not allow to post the invoice.
Company codes have different settings for withholding tax treatment
Message no. F5786
Diagnosis
You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
System Response
You cannot enter this kind of document.
Procedure
Enter the transaction in two documents.
For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
Thanks for the Support and early response will be appreciated.
JBC.Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting GL Co Code
Dr 106520(Exp) 1000
Cr 202020(Bank) 5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu -
LightweightDispatcher issue with Applets in Browser using Java 7, not 6
Spent the last year at work setting up some GUI JApplets for demos our of code. The JApplets house a number of layers of JPanels and JComponents, but should have no heavyweight components as children. I've set up standalone applications that run one of the JApplets as a child of a JFrame, and those demos have no trouble. When I run the same demo but as a JApplet in a browser, I get errors. Please note that the demo is a JApplet but written like the demo that uses a JFrame, so the JApplet causing an issue is a child of the JApplet the browser knows about.
The issue is seen when the user mouses-over the child JApplet. The listener of the component being moused-over is trying to send an event that the LightweightDispatcher is erroring trying to retarget. It does not seem to find the component that should be receiving the event. For reference, the JApplet implements the mouse-listener interface and is set as the mouse-listener for all its children recursively. Here is the error that is seen:
Exception in thread "AWT-EventQueue-2" java.lang.AssertionError
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.trackMouseEnterExit(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue$4.run(Unknown Source)
at java.awt.EventQueue$4.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
and it repeats that for every mouse event that tries to fire within the child JApplet.
Any thoughts on what this could be?
I had a similar issue with key strokes not finding the focused JComponent within the child JApplet, but I made my own KeyboardEventManager to handle that issue. Unfortunately there are no paths like that to override for the mouse listeners, not to mention that there is no focused object for the events erroring.
I do see that when I stop adding the mouse-listeners then the error does not appear, so I'm sure its related to that.
I suppose the most important note here though is that the JApplets were built using Java 6, but the error is seen when running the JApplet with the 1.7 JRE. Also, the JApplet is opened using a JNLP. When the JNLP is set to run at 1.6+ the demo runs fine, when set to 1.7+, the error is seen.
Please let me know if anyone has seen this or has a solution, or if I should report this as a bug to Oracle.This shouldn't be the case. You did make sure you are pointing the applet at the plug in correct? That means you are using an <object> tag as opposed to the <applet> tag in the HTML file?
If not, run your HTML page through the HtmlConverter that comes with the plugin and try using the resulting HTML.
Bryan -
Issues with external drive on Mac Mini / Lion
I'm using an external SATA drive in a Newer Technologies Voyager dock (which I like to call the "toaster") with a brand new Mac Mini i5 2.3G via FW800.
The drive was formatted using Disk Utility on a G4 running Tiger (10.4.11)
With the drive mounted, the Mini's performance seems to slow down, and it randomly dismounts the drive, with the usual warning, "you disconnected your drive without dismounting it first, bla bla...)
I think I remember when Leopard was new, there was a firmware issue that had to be dealt with, and when moving drives from OS 9 to X and back to 9, I lost access to the data on the drive.
I'm also aware of the partitioning scheme difference when formatting drives for use on the Intel machines.
Could either of the above have anything to do with the problem I'm having here?I'm not an expert in this, but as far as I know, GUID only comes into play if you want to boot from it, but...... you never know, it could - here is an excerpt from Disk Utility:
If you’ll be using the disk only with Mac computers, choose GUID Partition Table.
Another thought is: how old is that drive? All hard drives fail sooner or later - have you tried to check it with Disk Utility or something like Disk Warrior?
Maybe you are looking for
-
How can I get rid of the dark area on top one third of my iphone screen which spoils my background image? It seems this problem is caused by the software to increase the readibility of upper letters (clock battery etc.) It be nice to leave us the con
-
Help required in mapping actions ....(struts 2)
Hi all, i am using struts 2 , while my submit buttong looks like this : <a href="javascript:clientOverride();"> <img src="<s:property value="submit.gif"> </a> and clientOverride method looks like this function clientOver
-
How can I create a simple app that will automatically add folder script
Hi! I hope I can get a little help on this. I tried searching online and haven't found anything. Is there away I can make a simple "application" that will automatically add a folder script to a users folder? Basically I need a folder script to run b
-
Cinematic Tab missing Recon3d PCIe Windows 8.1
I was upgrading the Creative software for my Recon3d sound card then i realized that the cinematic tab is missing now. any clues??
-
How do I us my passport to export my iphoto?
As instructed by apple store, I used time machine. It appears to have backed up. How do I check that my iphotos are on the passport? When I click on iphoto under applications, I get an error code. My main purpose for the My Passport is to use as