Issue with ide-usb adapter

Hello... I'm trying to connect the hard drive from a G4 via an ide-usb adapter to my Intel Macbook, and the Macbook can't see the drive. I've used this adapter to read Windows HDs on Windows machines without any trouble, any ideas on what issues could be my problem? According to the adapter's literature it is Mac compatible.

It's this one... http://inlandproduct.com/usb20toidesataadapterpartnumber08412.aspx
Admittedly not the most high end product, but always worked flawlessly before. I tried it with the drive configured as master, as slave, and as cable select... nothing.

Similar Messages

  • Having connection issues with wireless usb adapter

    During the day when I'm just surfing the web or watching shows on hulu.com or using NHL game center live my adapter doesn't have any problems staying connected. But at night when I let my torrent client run my, adapter will disconnect and I will have to re-connect to the router manually to fix it.
    Is this a problem with my adapter or the torrent client settings? Would a different adapter, either usb or pci-express, fix this problem?
    Let me know if you need any more info.
    Thanks for any help.

    Hi
    I'm having the exact same problem .... exporting photos from iphoto to Facebook had worked perfectly fine for years, then I tried to export some photographs just a couple of days ago and I get the same problems as the Original Poster.
    I'm on Snow Leopard (OSX 10.6), iphoto 6 v6.06.
    I've tried updating my Adobe Flash player, to no avail.
    I'm pleased that other people are experiencing the same problems, but it's a mystery as to why it's suddenly stopped working.
    When I was in work I was able to upload photos to Facebook that were saved on my desktop no problem - work uses Windows.  But I'm unable to even go to Facebook, click on Create an Album and take it from there ... when I click on Create an Album nothing seems to happen.
    I'm so frustrated.

  • Issue with Receiver SOAP adapter for synchronous scenario

    Hello All,
    We are facing a strange issue with the SOAP adapter in the interface we have setup. This is the 1st time we are using SOAP adapter in our system (PI 7.11 SP7). We are making a synchronous HTTP call to the web service exposed by another system in our landscape. The payload is send with SOAP envelope and there are no credentials to be maintained in PI settings.
    The issue is that we are always getting timeout exception in PI audit logs after sending the request (3 minutes - standard timeout value, no additional config for this). But target system has confirmed that they are sending the response back. We tested from our server OS level and have received the response back in the same screen (to verify there is no firewall/port issue in between the systems). But when tried from RWB, it is always giving the timeout exception and we are not able to see any other log.
    We have tried checking in the NWA logs as well after increasing the logging level to ALL for com.sap.aii.adapter.soap. But surprisingly, we didn't get any logs at all for the outgoing SOAP call or incoming response and hence we are unable to trace the issue.
    We have setup another synchronous inbound SOAP interface (PI exposing the webservice) and it is working fine. We are also able to trace the logs in both audit log and NWA logs.
    Is there anywhere else we can check for the logs? Audit logs is showing timeout error and we are not able to see anything in NWA logs.
    Does the target system need to maintain PI credentials in the header when they send the synchronous response back?
    Are there any specific settings which should be checked to enable the sync communication? (this should not be the case since the inbound interface is working fine)
    Please help.
    Thanks
    Justin

    Hi Amit,
    Thanks for the reply.
    Yes we had tested successfully via SOAP UI as well (forgot to mention that). We are getting back the expected response in SOAP UI without using any credentials. We got the same response when we tested it through OS commands from PI server.
    The WS is hosted by the target system and they haven't maintained any credentials at their end. So when PI is trying to access, we don't need to provide any credentials. My question is, whether the target system should keep any credentials to send the synchronous response back to PI (java stack). We have tried that as well but since there aren't any logs, we are unable to verify whether the credentials are coming correctly.
    The service interfaces are correct and PI configuration are OK. I will try the XPI inspector for logs as you have suggested.
    Thanks
    Justin

  • Retina 13" macbook pro issue with defective USB ports?

    I have a late 2013 13" macbook pro with retina display. I'm having persistent issues with both USB ports. Connected peripherals like keyboards or external USB drives either will not be recognized at all, or will take a very long time (minutes) to be recognized by the system.
    I'm running the latest version of Mavericks OS X 10.9 (13A2093) at the moment, which includes the keyboard/trackpad firmware fix that addressed initial issues with this series of laptops.
    I took it to the local Genius Bar a few days ago and the Apple Genius was able to get an external USB drive to mount (eventually) on each port, but now it seems that waiting several minutes for the external device/drive to be recognized does no good.
    Is anyone else experiencing similar issues?

    Here is an example of devices you should see in the Device Manager. Can you check what you have?

  • Issue with JMS inbound Adapter  and Asynchronous BPEL

    Hi Gurus,
    I am facing the below issue with JMS inbound Adapter and Asynchronous BPEL .
    I have 2 JMS Queues one inbound and one outbound . The Composite has multiple BPEL Components around 4 on an average and i have 4 composites similar to that .
    Totally 4 Composites * 4 BPEL Components = 16 Services
    Propoesd Solution :
    I have used MessageSelector in the JMS Adapter for selecting the incoming message. The BPEL gets invoked if the message selector is true and proceses the Message and writes the response to the other Queue.
    Initially i had no problems but intermittantly the BPEL processes are getting invoked but they are not processing the data ( Bpel process is supposed to invoke an external service and get the response in a sync call) and each BPEL processe instance is in running state for ever . This remains even if i restart the servers .
    The message gets read by the JMS Adapter , BPEL instace gets created but it wont proceed futher and remains in the runnign state for ever.
    If i redeploy the Composite then messages get processed but the issue creeps up again ( i tried to checl the logs but ino cluea about the issue .
    Getting frustrated day by day tried the bpel.config.transaction, increased the JMS Adapter threads , inreased the worker threads but all in vein..
    please let me know if any one has faced similar issue .
    Anticipating a quick response from the gurus.
    Lakshmi.

    We are also facing this issue in 11.1.1.5.
    Breifly the issue is : The BPEL process which polls an inbound JMSAdater ( consume_message) either stays in running state forever ( whatever we do) or go to the recovery queue. It doesnt recover even if i try to recover it. This happens intermittently. Redeploying the application / restarting servers sometime solve the issue but as know we cant do that on prod systems .
    Can some one look into this on priority and help us giving a solution/workaround.

  • I am having an issue with a USB flash drive.

    Hello, I am having an issue with a USB flash drive. I have a 2012 iMac OS X 10.9. Drive keeps on disconnecting after about 30 seconds. I tried to reformat through Disk Utility but doesn't allow me to verify or repair as it disconnects. This same drive works fine on Windows machines. I tried all USB ports but all give the same issue. Message is: "Disk Not Ejected Properly. Eject "No Name" before disconnecting or turning off." When I attempt to copy data from the disk it comes up with the message: "The Finder can't complete the operation because some data in "" can't be read or written (Error code -36)". I believe the solution for this error is to format the drive but as mentioned this function doesn't work. I need to copy data from a Windows machine to my iMac. Any suggestions with this is appreciated. Thanks!

    I went back to a Windows machine, formatted it to NTFS (so lost the data but had a backup), recopied the data. Went back to the Mac but same issue happened after I tried copying the data "Disk Not Ejected Properly - Eject " " before disconnecting or turning off." One of the USB ports didn't detect the 32GB flash drive at all. And disconnected on another one.

  • FSCK and reboot issues with external USB drive

    I'm having an issue with an external USB hard drive I'm using.  I've always had issues with this drive cause my reboot to "freeze" when it's mounted.  Basically the system message with be sent out, but it doesn't actually proceed with the reboot.  No switch to init 6 or anything, but the shutdown process is still active.  I can continue to use the computer as usual, but I can't cancel the existing shutdown or try to enter init level 6 by hand.  So I just got around this by unmounting the drive before I shutdown.  However, lately when I try to unmount the drive I get an error saying that the drive is in use and I should check to see what processes are using it by runing lsof or fuser. 
    Yesterday I tried copying dsome files from the drive but there wasn't and activity on the drive. cp didn't report any errors though, it just sat there and did nothing.  I tried running fsck on the drive, but didn't get much farther.  I'll see some activity on the drive for about a second, then all activity stops and fsck just sits there. When I try to kill fsck, it won't.  Even with a kill -9. 
    I'm really confused as to what is going on.  Has anyone else had this problem?  Anyone have any ideas what could be causing all this or what I can do to stop this?  Thanks in advance!
    David
    [email protected]

    Press the reset button on the device. It is located between the USB and power ports. Make sure to take-out the external USB drive before you reset the device. Or you can also restore the defaults by accessing the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page. Check out this link for the set up; http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32cffead811249aea7e9fc6730bf59ad_KB25681_EN_v1.xml...

  • Formatting USB Key (MS Pro Duo with IOGEAR USB adapter) for MAC & Windows

    Hi,
    How do I setup my MS Pro Duo card and IOGEAR USB Adapter to read the entire capacity on both MAC OSX and Windows?
    At this moment, I used it on MAC first and then Windows reads the card but the message 'disk full' appears when transferring files onto the card from PC.

    Windows doesn't ask to format.
    Windows reads the folder and files uploaded on the MACbook. However, it still says that 'disk is full'.
    Is it a formatting issue with FAT32 vs NTFS?

  • Charge new iPad with iPod USB adapter 5V 1amp?

    Is there any problem to charge my new iPad with a USB iPod wall adapter with an output of 5V 1amp? And is it okay to do it daily? Will it affect in any way the battery?

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Issues with signal input adaptive filtering, it won't filter the added noise from the input waveform

    Hello,
    I have an issue with my adaptive noise cancellation program. Essentially I want to input a custom wav add noise to it and then filter the noise away in order to gain the custom wav again.
    While doing so I want to read the learning curve and read the adaptive coefficients. Unfortunately I have an issue when it comes to the filtering of the custom wav+noise. It won't filter the signal at all.
    It would be helpful if someone could have a look at it and possibly help me out.
    Thanks!
    Attachments:
    Testing.vi ‏59 KB

    Hey Jan,
    Thanks for the reply. I am currently using the Adaptive Filter Toolkit in order to obtain those VIs. The VIs which are in use are the LMS Adaptive Filter ones. 
    I figured there might be an error with the input of the array. This VI requires a DBL Array but it seems like it can not process it. 
    The "Get Wavefirn Components" works better now but I still have an issue with a time. I put a 9s wav file in but it only computes it in a very short time and I can not play the file while it is computing.
    I added the modified program to the attachments. 
    This program is ought to read a waveform file add noise to it and then use an adaptive filter in order to get the orginal waveform back again and if possible either store or play the final waveform. 
    Thanks for your help.
    Attachments:
    Testing.vi ‏62 KB

  • Problem setting up connection with 2wire USB adapter (BT Home Network 1200)

    I keep on running into a brick wall setting up my internet connection on my newly purchased MacBook (I have never used a mac before, having used a PC for years). I am trying to set up my macbook as an additional computer on my BT Home Network 1200, and I have installed the drivers given on the 2wire CD, but even when I plug in the USB adapter, the Macbook does not seem to recognise it. The adapter looks something like this:
    Anyway, the instructions given in the BT Home Network PDF manual seem to suggest that it is relatively straightforward, and that it is simply a matter of clicking the apple menu, selecting "control panels", selecting "TCP/IP", and then in the "connect via" box, clicking on the pulldown menu and selecting 2Wire PC Port. However, I am using 10.4.9 and it seems to me that this guide must have been written for an outdated version of Mac OS X because none of these instructions seem to make sense or work in the context of my macbook. At the moment, it seems like I won't be able to get my macbook online. Could someone please help explain to me how to get around this?

    Any reference to 'Control Panels' will, indeed, be for Mac OS 9.x, the last version of which (9.2) was released in 2001.
    My advice would be to return it to BT and ask them for an ethernet-based modem, not a USB one.
    USB DSL modems have varying levels of support in Mac OS X ranging from poor to none. The fact that 2Wire doesn't include Mac OS X instructions implies that this model is at the lower end of that scale.
    By comparison, an ethernet-based modem will connect to your Mac via ethernet, have the option of sharing the connection with multiple machines, typically be faster, and has an almost 100% compatibility rate.

  • Issue with HAL essbase adapter

    Hi Experts
    I have an issue with HAL,I got the below error when I tried to use essbase adapter, the HAL version is 7
    java.Lang.NoClassDefFoundError
    I know this is known error ...most of the forums are telling this is error related to Environment Variables...but I dont know how to fix as I am unaware of this....java..... classes..bla bla bla..
    I installed HAL in c drive, Can anyone help me ...how to fix this issue....
    Thank You
    M.S

    Go to control panel->system->system properties->advance->environmental variables. You should have something like this "C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter" in your classpath variable. Check you installation on your "C:\" drive to get the correct path. Hope this helps.

  • Issues with Seeburger FTP adapter

    Can one of you with Seeburger FTP adapter experience share some information on these issues I'm facing
    1. Do I need to setup resource management in Seeburger workbench. If so, do I need to configure, resource, server and reservations. Do you have more information and what parameters I need here.
    2. In the Seebuger FTP adapter, I have
    Module Key - exit
    Parameter Name - JNDIName
    Paramter Valu - deployedAdapters/SeeXIFTP/shareable/SeeXIFTP
    JNDIName, should I be replacing this with some other name. I'm trying to get Seeburger FTP to work and in the messaging monitor, I see the message as passed to Module Processor but it does go anywhere from there.
    Can one you throw some light on this subject...what to expect from this definition.
    Thank you for all your replies,
    Parimala

    I'm resending this since I did not have any luck with it the first time.
    We also have an oss note waiting to be responded on this subject.
    When I send messages using Seebuger FTP adapter, I see the following information in the SAP message monitor -
    "Message entered module processor exit bean and will be transferred to JCA adapter".
    But does not get to IBM VAN mailbox. How do I trace from this point onwards.
    Should I use Seeburger monitoring tool for this? If so, I don't see anything in Seeburger monitoring (used all criteria).
    Please let me know if you have any information on this subject.
    Thanks,
    Parimala

  • Safe to charge iPhone with Blackberry USB adapter?

    I have the small wall-plug-to-USB adapter from my Blackberry that looks like the one below. Is it safe to use a standard Apple 30 pin + USB connecter (pictured below the Bberry connector) with it to charge my iPhone 4S? Otherwise I have to buy a second Apple-branded connector to have one at both home and work.

    usb is 5volt ios devices can charge with anything that provide 5volts
    if the charger don't follow the usb std and provide 50volts the phone will explode

  • Problems with wireless usb adapter on MSI K8NGM-V

    Hi!
    I have a 3Com (3crusb20075) wireless usb adapter, and a MSI K8NGM-V Mainboard. Very often the usb disconnects from the network and i have to reinsert it to work again. A friend of mine have the exact same adapter and that one fails too. He uses mine without problems. I therefore belive that this is a problem with the usb ports on my mainboard. Have anyone heard of anything like this? I wanted to try to update my bios but i don't have a floppy so msi live update wouldnt let me, and i could find the bios files on the msi webpage so i cant burn them on a bootable cd. Help please
    (I trying turning of power save mode on the usb adapter, without any luck. Tested it in linux. Same result)
    Alex

    The ability to access the network, but not the Internet, typically indicates that the computer is not able to either find or negotiate with the DNS servers. The proper DNS servers would be provided by your ISP using DHCP. In turn, the AirPort would use DHCP to provide these to both the wired & wireless computers connected to it.
    Please try the following:
    For each PC that is unable to access the Internet, temporarily include the following OpenDNS servers:
    o Primary: 208.67.222.222
    o Secondary: 208.67.220.220
    You would enter these in the network TCP/IP settings for the respective PC's wireless network adapters. You may need to restart the computer in order for these DNS settings to "stick." After restarting, can you access the Internet with either or both of them?

Maybe you are looking for