Issue with implementing SAP note 1486147.

I am trying to implement SAP note  1486147. My software component is SAP_APPL and release is 603. But the prerequisite notes (1148361 and 1339658) are  getting incompletely implemented with activation errors because of which I am not able to implement the main note 1486147.
I have created all the DDIC elements as mentioned in the note.Also created the smartform. Has anyone successfully impemented this note? Is there anything else to be done other than what is mentioned in the note?

Hi,
Resolved the issues. Before applying the note i had made manual corrections in J_1IEWT_CERT because of which my system was not implementing the note. I reversed back all manual changes i had made and then applied the note. It got successfully implemented.
Edited by: lyviaCardoza on Sep 3, 2010 7:24 AM

Similar Messages

  • SOlman_setup issue at implement SAP Note Step

    Hi Friends,
    While i am performing the solman_setup (system preparation) facing once issue at Implement SAP Note step.
    In this step while i am performing  the post processing step (3rd step) giving the red signal The system only partially implemented the manual activities for note 1856234.
    And i followed the note 1856234 as per the note i ran the report AI_CRM_ANALYZE_IBASE_SORTF and i got the error messages.
    The Ibase component 000000000000003598 has deviceid: SID 00XXXXXXX
    Sort string is needed!
    Comp. with same device id:
    Replace Sort string with (from LMDB):
    The Ibase component 000000000000003272 has deviceid: SID 00XXXXXXX Etc.
    Sort string is needed!
    Comp. with same device id:
    Replace Sort string with (from LMDB):
    And as per the note
    when i am executing IB_GEN i am getting below errors.
    Object not found - will be created.
    No changes made; Saving not allowed
    Failed to save object %   1 (Object family 7001).
    Kindly suggest on this.
    Thank you,
    Chowdary.

    Please refer to SAP Notes 1694004 - Dealing with duplicate technical system names (SIDs) and 1747926 - Dealing with duplicate technical system names (old SLD)

  • Issue of implement SAP Note

    Dear Expert
      When I implement SAP note through t-code SNOTE, it shows an alert message "SAP Note doesn't contain valid correction instructions". How should I fix this issue? Any response is appreciated.

    Dear Experts
       All SAP Notes I need to implement are :
       1118532, 1068198, 1014997, 599812
       These are all about Czech language.
      Our SAP version :
       SAP R/3 Enterprise 470 x 620
      Any idea??

  • New TDS requirement SAP note 1486147

    Hello,
    This is regarding the new TDS requirement for which SAP note 1486147 has to be implemented.
    The problem is that we have implemented the note and also maintained entries in J_1I_SECCO_CIT as well as the entries in J_1IEWT_ACKN.
    When we do the testing we are constantly getting one error " J1IN:016"
    This error code is not defined in SE91.
    If any one has handled such a scenario please let us know.
    Regards

    Hi,
    Achnowledgement details comes in table it_qrtrtab at run time in the smartform, you can dibug the program j_1iewt_cert and smartforms J_1iewt_cert where at run time you will able to see data avaialability, If values are not available in this internal table then check related notes given by SAP, I have already implemented this note and also faced same issue but my FI consultant has given me the related note and my issue was resolved.
    Please checkout related notes and data population in the dibugger.
    Regards,
    Umang Mehta

  • Issue with implementing Find window

    Hi,
    I am facing an issue with implementing Find window. The find window everything is working fine, but when I am opening the form I am facing the following error
    'Error: To retrieve the Information in this block, use menu option view -> query by example -> Enter to invoke enter-query mode, then view -> Query by example > Run to run your query..'
    when I click 'Ok', it is navigating to the FInd window.
    How can I avoid the above error message?
    And also after searching, I navigate to the main window to display the records, but the 'Find' torch icon is not getting enabled, how do I that?
    Thanks,
    Ramu

    Thanks for the reply.
    Yes, I have the QUERY_FIND trigger with the code as 'APP_STANDARD.EVENT('QUERY_FIND');'
    And also 'first navigation data block ' to my result block. Now that the error is gone, But still the Find Icon is not enabled
    Please advice.
    Thanks,
    Ramu
    Edited by: Ramu Chennuri on Oct 21, 2008 8:32 AM

  • Implementing sap note

    After implementing sap note i am getting this message
    You have started to implement corrections that are contained in an SAP Note. However, you have not selected any objects in the overview of the Repository objects that are to be changed. This means that the system has not changed any objects that are in correction instructions 01200615321         00001630720005.
    where do i select the objects to be changed

    Hi
    The transaction code SNOTE is used to implement OSS Notes. With the SNOTE
    transaction, it is no longer necessary to register ABAP objects such as report function
    modules etc. manually. But data dictionary objects such as screens, tables need to
    be modified manually by registering them in OSS system.
    In order to use the transaction code SNOTE, the relevant transport which implement
    this transaction in the system need to be transported. Please refer to the SNOTE
    guide available at http://service.sap.com
    this pdf will be helpful
    http://www.sappoint.com/basis/snote.pdf
    Transaction Code 'SNOTE'
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • We have been having some issues with Email notifications not going out and getting hung up in SOST.  Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

    We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

    What version of Solman are you using ?  Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1  else in 7.01 you use auto reaction methods to monitor .
    Regards
    Jay

  • Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Hello surig84,
    Thank you for providing the details of the issue you are experiencing when syncing your iPad.  I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
    /Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
    Now launch InDesign and see if the problems are resolved.
    If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
    Let me know if any of these suggestions work for you
    I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

  • Has anyone had issues with their itunes not coming up?

    Has anyone had issues with their itunes not coming up?  I keep getting error message 13014.  I just bought a new classic ipod and am not sure if this is the problem.

    Hi
    Your new iPod has certain operating system requirements. Does your iMac meet those requirements?
    http://www.apple.com/ipodclassic/specs.html
    3rd Column on the right hand side, about a 3rd of the way down. To find out which version of iTunes you have, launch it and select "About iTunes" from the iTunes menu.
    HTH?
    Tony

  • Issues with photos/videos not uploading in chronological order..

    I have been having issues with Adobe Bridge not uploading my photo/video files (from a CF card) in chronological order. When uploading I select to rename the files by shot date + 01.. etc. For photos the first image then becomes the last image after uploading, and for video files everything is out of order. Not sure why as the only other thing I have selected to add is copyright info. Also having issues with Bridge not converting raw files to DNG (which has led me to use Adobe DNG Converter - not terrible, but hopefully there is a reason?). I think it is a problem with Bridge, as photos uploaded to my website - something completely non-Adobe related are also then thrown out of order.. so it seems to be an issue with files that have come through Bridge at some point. Any advice is much appreciated.

    I just noticed that iTunes is now accepting 'some' videos. They are all the same file type (mp4), but iTunes is just randomly choosing which videos it wants add to the Library & not.
    I'm still not getting any results when it comes to the Photos.
    ... and one last thing ... only random songs are displaying the album art on the iPod. Yhey ALL appear in iTunes. If i restore my iPod & re-load everything, some of the songs that DID have artwork appearing on the screen now don't.
    This is really messed up! Wonder if the eventual Vista-compatible iTunes will fix this problem ...

  • Implementing SAP Note 837300

    We have a situation when we implement SAP NOTE 837300, the following is the information I get, Please Assist anyone.
    Diagnosis
        The objects R3TR NOTE 0000837300 and LIMU FUNC SO_OBJECT_MIME_GET cannot
        be edited together because only one of them can be transported out of
        this system. The other cannot be transported out of this system.
    System Response
        The function terminates.
    Procedure
        Edit the two objects separately.
    Regards
    Bangani

    You have posted your question on the wrong forum.  Here is dedicated to SAP Business One System Administration.
    Please close your thread and find the proper one to post.
    Thanks,
    Gordon

  • Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    No problems here.
    Edit...
    My IOS-7 is on an iPod Touch.

  • Error in TDS Calculation(/4T1) after implementing SAP Note

    Dear Experts,
    I have implemented SAP Note and followed the steps suggested by SAP. I have processed payroll and found that /4T1  Income Tax 02 is still showing 30,000. Kindly attached screenshots of tax slab and RT for your reference.
    Kindly suggest.
    Regards
    Ravi Kumar

    Dear Experts,
    It was observed that for senior citizens, system is calculating on 2,50,000 instead of 3,00,000. Kindly find attached screenshot of RT for the employee whose age is 62.
    Regards
    Ravi Kumar

  • Exchange 2010 - Issues with Room Finder not showing available rooms.

    Hi,
    We are having issues with room finder not populating the room resources that are available inside a meeting request within outlook 2010. It also appears that there is a drop down box that is present in a lot of the other forums and pages that I have referenced
    for troubleshooting:
    Single Exchange 2010 server version 14.03.0224.002 running all roles. Migrated from previous Exchange 2003 environment and old 2003 server has been decommissioned.
    Room mailbox created and all configured resource policies are working correctly for creating meeting requests. A distribution group was created and the room mailboxes added to this DG as per instructions here: hxxp://exchangeserverpro.com/find-meeting-rooms/
    . We have recreated the OAB and confirmed that the Room mailboxes are part of this list.
    Does anyone have any ideas why the rooms are not showing up in the Room Finder box?
    If I have missed any information please feel free to ask for more info.
    Thanks, all help will be appreciated.

    Hi,
    According to your description, I understand that room finder cannot show available room in Outlook 2010.
    If I misunderstand you concern, please do not hesitate to let me know.
    I want to double confirm whether it works before, or it can’t work after decommission Exchange 2003? How about other Outlook version?
    The offline address book (OAB) is generated by Microsoft Exchange Server. In order for the Room Finder feature to work, the OAB must be generated by Exchange 2010 or a later version.
    Please run Get-OfflineAddressBook | FL Identity,Server to double check OAB generation server. Also, run Get-OabVirtualDirectory | FL to check URL for current OAB VD and force update OAB.
    Then open Test E-mail AutoConfiguration to double check whether Outlook get correct URL.
    After above complete, please try to switch to Send/Receive tab, click Send/Receive Groups, and then click Download Address Book.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

Maybe you are looking for