Issue with importing data using data pump

Hi Guys,
Need your expertise here. I have just exported a table using the following datapump commands. Please note that I used *%U* to split the export into chunk of 2G files.
expdp "'/ as sysdba'" dumpfile=DP_TABLES:PT_CONTROL_PS_083110_*%U*.dmp logfile=DP_TABLES:PT_CONTROL_PS_083110.log tables=(PT_CONTROL.pipeline_session) filesize=2G job_name=pt_ps_0831_1
The above command produced the following files
-rw-r----- 1 oracle oinstall 2.0G Aug 31 15:04 PT_CONTROL_PS_083110_01.dmp
-rw-r----- 1 oracle oinstall 2.0G Aug 31 15:05 PT_CONTROL_PS_083110_02.dmp
-rw-r----- 1 oracle oinstall 2.0G Aug 31 15:06 PT_CONTROL_PS_083110_03.dmp
-rw-r----- 1 oracle oinstall 394M Aug 31 15:06 PT_CONTROL_PS_083110_04.dmp
-rw-r--r-- 1 oracle oinstall 2.1K Aug 31 15:06 PT_CONTROL_PS_083110.log
So far things are good.
Now when I import the data using the below command, it truncates the table but do no import any data. Last line says "*Job "SYS"."PT_PS_IMP_0831_1" completed with 1 error(s) at 15:14:57*".
impdp "'/ as sysdba'" dumpfile=DP_TABLES:PT_CONTROL_PS_083110_%U.dmp logfile=DP_TABLES:PT_CONTROL_PS_083110_IMP.log Tables=(PT_CONTROL.pipeline_session) TABLE_EXISTS_ACTION=Truncate job_name=PT_ps_imp_0831_1
Import: Release 10.2.0.3.0 - Production on Tuesday, 31 August, 2010 15:14:53
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.3.0 - Production
Master table "SYS"."AT_PS_IMP_0831_1" successfully loaded/unloaded
Starting "SYS"."AT_PS_IMP_0831_1": '/******** AS SYSDBA' dumpfile=DP_TABLES:PT_CONTROL_PS_083110_*%U*.dmp logfile=DP_TABLES:PT_CONTROL_PS_083110_IMP.log Tables=(PT_CONTROL.pipeline_session) TABLE_EXISTS_ACTION=Truncate job_name=AT_ps_imp_0831_1
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-39153: Table "PT_CONTROL"."PIPELINE_SESSION" exists and has been truncated. Data will be loaded but all dependent metadata will be skipped due to table_exists_action of truncate
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/TRIGGER
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Job "SYS"."AT_PS_IMP_0831_1" completed with 1 error(s) at 15:14:57
I suspect that it has something to do with %U in the impdp command. Anyone encounter this kind of situation before? What should be my import command be? Just want to confirm I am using the right import command.
Thanks
--MM
Edited by: UserMM on Aug 31, 2010 3:11 PM

I also looked into the alert log but didn't find anything about the error there. Any opinion?
--MM

Similar Messages

FDM: Issues with importing mapping using excel files

Hi All,
I am trying to map ICP Entries using an excel file.
I have made 2 mapping (explicit) entries, manually and exported it in Excel and then added all the Mappings in the same file, in proper format. when I am importing, I am not getting any error but the mapping is not getting updated and the new entries are also not getting added. so Ideally no Change in the tDatamap table.
Environment details: FDM Version 11.1.1.3 is getting used. Target App is Essbase 11.1.1.3. able to connect to Essbase, no issues with connectivity.
Has anyone face this issue.

The section of the admin guide I reference will tell you how to create a properly formatted excel workbook. Import XLS will work if the excel workbook is set up properly. The import XLS functionality will not change existing records, only add new ones.
Your template requires that the first cell is the table name. The second row is the table field names and rows 3 through X are the values to be inserted into the table. The named range beginning with UPS needs to highlight all of these rows and columns.
Quite honestly, if you take the time to review the admin guide, I'm sure you'll find the answer that you need. Please understand that, like you, most of us that post on this board are consultants. We share knowledge to help the community better utilize the product. It's frustrating to hear that none of the answers that I previously provided you were at all helpful.
Edited by: TonyScalese on Nov 30, 2010 3:23 PM

Issues with images when using data merge

Here's the deal. We are converting from CS6 to CC2014. I have a file that opens fine in CS6, the merge works fine.
If I open that file in CC2014 it works fine with the exact same list. But, if I relink a new list or change and update the current list, the data merge no longer works for the images in data merge. Even though nothing has changed in the file links.
I get the error that it cannot find the images.
Is this a know issue?
Mac OSX 10.10.1

It could be that the template is some how bunged up, even though it is evidently working in CS6. You might want to try, as a test, setting upa new document in CC, add the data file, put your placeholders in the document and merging. Then change the merge file, then try to update it.
All I can really say is that I have not experienced this issue (yet). And as far as I can tell, yours is the first post on the matter that isn't document corruption related, or that Previewing the records hasn't caused some malady. either needs the template remade or brought into a new file to fix. You issue sounds sort of half-way between.
Mike

Issue with Oracle LONG RAW data type

Hi All,
I am facing some issues with Oracle LONG RAW DATA Type.
We are using Oracle 9IR2 Database.
I got a table having LONG RAW column and I need to transfer the same into another table having LONG RAW column.
When I tried using INSERT INTO SELECT * command (or) CREATE TABLE as select * , it is throwing ORA-00997: illegal use of LONG datatype.
I have gone through some docs and found we should not use LONG RAW using these operations.
So I did some basic PLSQL block given below and I was able to insert most of the records. But records where the LONG RAW file is like 7O kb, the inserting is faliling.
I tried to convert LONG RAW to BLOB and again for the record where the LONG RAW is big in size I am getting (ORA-06502: PL/SQL: numeric or value error) error.
Appreciate if anyone can help me out here.
DECLARE
Y LONG RAW;
BEGIN
FOR REC IN (SELECT * FROM TRU_INT.TERRITORY WHERE TERRITORYSEQ=488480 ORDER BY TERRITORYSEQ ) LOOP
INSERT INTO TRU_CMP.TERRITORY
BUSINESSUNITSEQ, COMPELEMENTLIFETIMEID, COMPONENTIMAGE, DESCRIPTION, ENDPERIOD, GENERATION, NAME, STARTPERIOD, TERRITORYSEQ
VALUES
REC.BUSINESSUNITSEQ, REC.COMPELEMENTLIFETIMEID, REC.COMPONENTIMAGE, REC.DESCRIPTION, REC.ENDPERIOD, REC.GENERATION, REC.NAME,
REC.STARTPERIOD, REC.TERRITORYSEQ
END LOOP;
END;
/

Maddy wrote:
Hi All,
I am facing some issues with Oracle LONG RAW DATA Type.
We are using Oracle 9IR2 Database.
I got a table having LONG RAW column and I need to transfer the same into another table having LONG RAW column.
When I tried using INSERT INTO SELECT * command (or) CREATE TABLE as select * , it is throwing ORA-00997: illegal use of LONG datatype.
I have gone through some docs and found we should not use LONG RAW using these operations.
So I did some basic PLSQL block given below and I was able to insert most of the records. But records where the LONG RAW file is like 7O kb, the inserting is faliling.
I tried to convert LONG RAW to BLOB and again for the record where the LONG RAW is big in size I am getting (ORA-06502: PL/SQL: numeric or value error) error.
Appreciate if anyone can help me out here.
DECLARE
Y LONG RAW;
BEGIN
FOR REC IN (SELECT * FROM TRU_INT.TERRITORY WHERE TERRITORYSEQ=488480 ORDER BY TERRITORYSEQ ) LOOP
INSERT INTO TRU_CMP.TERRITORY
BUSINESSUNITSEQ, COMPELEMENTLIFETIMEID, COMPONENTIMAGE, DESCRIPTION, ENDPERIOD, GENERATION, NAME, STARTPERIOD, TERRITORYSEQ
VALUES
REC.BUSINESSUNITSEQ, REC.COMPELEMENTLIFETIMEID, REC.COMPONENTIMAGE, REC.DESCRIPTION, REC.ENDPERIOD, REC.GENERATION, REC.NAME,
REC.STARTPERIOD, REC.TERRITORYSEQ
END LOOP;
END;
/below might work
12:06:23 SQL> help copy
COPY
Copies data from a query to a table in the same or another
database. COPY supports CHAR, DATE, LONG, NUMBER and VARCHAR2.
COPY {FROM database | TO database | FROM database TO database}
            {APPEND|CREATE|INSERT|REPLACE} destination_table
            [(column, column, column, ...)] USING query
where database has the following syntax:
     username[/password]@connect_identifier

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos.

Issues with importing from excel

I have been running into a several issues with importing from Excel.
First my configuration
I am running SQL Developer ver 1.5.5 Build MAIN-5969
I am on a Windows XP Professional Version 2002 with Service Pack 3
I am importing into an Oracle 10g database.
1. SQL Developer doesn't work on Excel 2007, I have to save all my files into Excel 97-2003 format before I can use them.
2. If I run into an error loading and stop the process, SQL Developer doesn't release the Excel file and I get a sharing violation if I try to save the spreadsheet without closing SQL Developer.
3. I have found that I have to set print area to the area I want to work with, otherwise the import wizard tries to keep adding rows.
4. When using the Import wizard, it keeps adding commas on fields with numerics unless I specify the column in excel as text. Currently the column is formatted as General in the spreadsheet or I can change the wizard format to say the column is an integer, but it actually is just a code field with numeric characters so it may have leading zeroes that I need to keep.
This might be related,
I have a column in excel defined as text but only contains numerics. It is of length 4, but the wizard sets a precision of 5 with a datatype of VARCHAR2. If I try to change it to 4, I get an error saying the field is not large enough. Yet, when I do a LEN on the column, it only gives me a 4. I have other fields in the same sheet that a 3 position numeric and 2 position numeric and those are fine. I am thinking this is related to the comma being inserted in a numeric field for anything greater than 3 positions.
5. Importing excel dates to oracle dates doesn't work. I have to convert the excel date column to text then import as a VARCHAR, then convert to Date once in the database.
6. The default of nullible is not set on any columns and I have to set them before the import. (I would prefer it set to nullible and I have to uncheck the box to make it not nullible. I would prefer to import all of the data and then deal with the nulls after they have been pulled in)
7. When I select header columns included it uses that as the column names. Is it possible to do the name length check then? It has bit me a few times where I try to import and forget to check the name length and then I get an error when I start running the import.
8. If one of the columns to import has all nulls, then the precision comes out to 0 and if it isn't changed an error occurs on import. Could this situation default to a precision of 1?
9. It would be nice if there was a completion message displayed and a cancel option while running.

On point 3.
I have a column in excel that consists of numbers. 4 digit numeric codes. Ex, 1111, 2345, etc
The column's format is general. It displays as just 4 numbers.
When I start the wizard initially, the column appears with data as 1,111, 2,345, etc, on the Data Preview screen.
It determines the precision to be 5 on the column definition screen.
If I change the precision to 4 then continue, that field will error out when I verify with "not big enough to hold the data in source columns"
If, I change the excel column to a TEXT column.
Excel still displays as 1111, 2345, etc
The wizard then displays the same data 1111, 2345 on the Data Previeiw screen
Yet, when I get to the column definition screen it still sizes it as a 5
If I change it to a 4, I get the same error when verifying.
If I leave them alone as 5, then it processes just fine.

JDev 10.1.3.3 - issues with imported Business Components

Hi,
I have got some issues with importing Business Components in JDev 10.1.3.3.
I cannot discover/use the imported components.
What I did is the folowing:
1. In a existing project I extended the default base-classes to create our own layer
2. created a project called ModelShared
2a. configured the project to use the base-classes I created in step 1
2b. created an entitybased-viewobject (RefCodesByDomain)
2c. created bc deployment-descriptors
3. created a project called RelatieModel in the same workspace as ModelShared
3a. added dependencies to the deployment-descriptors as well as the project created in step 2
3b. configured the project to use the base-classes I created in step 1
3c. imported business components
Although I did not recieve any errors during the import of business components, I am unable to add the vo (RefCodesByDomain) to a service.
I do see the package which contains the vo but is has no entries.
Importing the business components to a new BC Project in a seperate workspace did succeed (I could reuse the vo).
I tested a little further and the folowing occurred:
4. I created a new vo in the ModelShared Project
5. I deployed the ModelShared
6. Restarted JDeveloper
7. Got the folowing error message in the console window when expanding a service in my datacontrol pallette:
INFO: oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found
1-sep-2008 13:23:27 oracle.adf.dt.controls.DataControlsTreeWillExpandListener treeWillExpand
FINER: THROW
java.lang.NullPointerException
        at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.init(JUDTViewReferenceAccessorDefinition.java:108)
        at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.<init>(JUDTViewReferenceAccessorDefinition.java:98)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.createViewObjectDefinition(BC4JDataControlDefinition.java:228)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.addViewObjects(BC4JDataControlDefinition.java:208)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.loadStructure(BC4JDataControlDefinition.java:110)
        at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.getStructure(BC4JDataControlDefinition.java:407)
        at oracle.adf.dt.controls.treemodel.jsr227.JSR227DataControlTreeNode.loadChildNodes(JSR227DataControlTreeNode.java:129)
8. In my other "fresh" bc project I was able to use the newly created vo.
9. When I added a VO to my shared project, all projects that are refering to the shared project loose their vo's in the data-controlpannel
Do you have any suggestions?
Regards,
Romano

Hi,
since this appears to be a WebCenter related issue, I suggest to try the Webcenter forum WebCenter Portal or to log a bug
Frank

A strange issue with importing avi video

I have a rather strange issue with importing avi files (which playback normally in other programs) into CS4. When I import an avi recorded from my camera into CS 4 in the preview the sound is played back normally, but the video itself is weird. Pretty much roughly first 5% of it are stretched over the whole spand and slowed down to fit. So the video of 4 minutes will play sound normally for 4 minutes, but replay only 10 seconds of video VERY slowly. I'm a bit puzzled because I've used the same camera with CS3 and never encountered this problem. breaking apart and speeding up the video obviously didn't work because the video only displays the first 5 recorded seconds no matter the speed, tweaking with presets didn't work either.

subtlemolotov wrote:
I obviously know it's a photo camera, I own it.
The point is it's something we needed to know to answer your question.
subtlemolotov wrote:
Well I've found a very unprofessional solution.
"An unprofessional solution?" Kind of like shooting video with an still camera.....

Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Urgent please
anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Sounds like the folder Write permissions issue described here with a solution:
"Some import operations were not performed" from camera import

Compatibility issue with developer 6i using (64 bit) OS

Hi All,
I am using oracle 9iR2 (32 bit) on Linux Red Hat (32 bit) with developer 6i. Now i want to upgrade OS Red Hat (64 bit) and migrate database 10gR2 (64 bit).Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
Thanks

Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
No, as long as developer 6i is at least patch 16. We use it.

HT5594 why in spite of i turn off all of location servies when i turn on cellular data use data again ?

why in spite of i turn off all of location servies when i turn on cellular data use data again
in cellular >>system services >> mapping services
how can i turn off mapping services completly ??
& why now it use data until i turn it off ???

Settings>Cellular>Use Cellular Data for and turn Maps off. If you are not using Maps for navigation, it's not using data, though.

Issues with importing song data and artworks

Hi all,
I am having annoying problems with importing songs to iTunes. I recently reinstalled my OS (Windows 7) and iTunes. Now, that I want to import all the songs, I'm facing some difficulties:
1. iTunes just won't import song data for some albums, although they are clearly included in the song. Windows Media Player has no problems with them, it is just iTunes. Funny thing, so far it only happens to songs previously encoded by iTunes...
2. A very general problem: iTunes doesn't import artworks properly, coming with the files. Even if it is music that was previously imported by iTunes. I can see the artwork in the Windows Explorer and in the Windows Media Player... but not in iTunes. But then again, sometimes, it works automatically... maybe 1 out of 6 albums...
Any ideas? maybe it's the ID3 tag version, script issues (UTF, vs. ASCII,...)
Cheers. Alex.

Update: I had a couple of more such issues, where the album and/or the artist were imported as "unknown". When I went into the ID3 tags, I saw, that ALL OF THEM had a "0" written into their comments. And ALL OF THOSE albums were either imported through through, or bought from iTunes. Apple Hurray. :-/

Issues with iMessage when switching data carrier (wifi - cellular)

So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W.

Problem with Exception Worksheet using Data from Supply Plan Data Table

I added a series for a flag that indicates whether product is sourced from multiple manufacturing sites for a given customer and item. The flag is on the supply plan data table because it depends on the scenario. I created an exception worksheet for when the flag is set but all combinations are being displayed. If the flag is not set for a given combo then "Selected Page Item has No Data" is displayed in place of the table. I want only the combinations that meet the exception to be shown. I tried setting up an exception worksheet for customer shipments which is also on the supply plan data table but saw the same issue with all combinations being displayed whether or not the condition is met. Does anyone know of any issues with using exception worksheets with the supply plan data table? I searched the documentation and saw that exceptions behave differently with promotion series but this isn't a promotion.
I'm using Demantra version 7.2. Thanks for any help!
Edited by: user9253208 on Mar 30, 2010 6:40 AM

Thanks. We have come up with a workaround. While the combinations on the left are not affected by the exception, the data in the main table is so we moved as many levels as possible into the table. The performance is slow but the data is more useful, especially when exported into Excel. I was hoping for a better solution but I guess we'll just have to stick with what we've come up with.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Issue with importing data using data pump

Similar Messages

Maybe you are looking for