Issue with importing effects settings from 3.0 to CS5.5

Several times I've attempted to import effects settings from 3.0 into 5.5 using the 5.5 Import>Application Settings function.  Each time it says that it is unable to do it because of some unknown error.  Is there another way to import the settings?  I'm in the middle of an album project in 3.0.1 and would like to try 5.5 with some of these existing sessions.  I've used the SuiteSpot studios Ses2Sesx program to translate the session.  It imports fine, but none of the effects or racks import.  I very much want to be able to do that. 

Hi Michael,
These effects are mostly external VSTs, but a few of them are native
(Parametric EQ).  The program will just not import the settings .xml
file or the vstmanager settings .xml.  The VSTs seemed to have been
found easily by the program.  I have not yet gone through them all to
see if they will pop up.
Another interesting thing - when I installed AACS5.5 I lost the ability
to open AA 3.0.1.  I had to reinstall 3.0.1 in order to be able to use it.
I'm not liking this program at all.  I don't like the interface, the
GUI, or the navigation through the program.

Similar Messages

  • Quality issue with importing edited audio from Adobe Audition CS6 to Articulate 09

    I have edited an audio file using Adobe Audition CS6 and the playback sounds fine. I then import the edited file into Articulate'09 and the audio sounds horrible, very tinny and not useable. Does anyone have any suggestions on how to fix this issue? I have tried saving the audio files as mp3 and wav to see if that would help and it did not make a difference.

    SharonL65 wrote:
    I have edited an audio file using Adobe Audition CS6 and the playback sounds fine. I then import the edited file into Articulate'09 and the audio sounds horrible, very tinny and not useable.
    I checked - it certainly supports both formats, but you'd have to be a lot more specific about what's wrong, because 'sounds horrible' doesn't convey anything meaningful at all, I'm afraid. And we have no idea of the format you are using - it's very possible that if it's being resampled on the way in by the operating system. If that's the case you have to find out specifically what formats (in terms of bit depth and sample rate) that this software actually supports.
    Bottom line is that I'm afraid that this isn't very likely to be an Audition problem at all - you may get a more detailed and meaningful response from Articulate themselves.

  • Having issues with importing a FLV from Adobe Connect. Either the file is too large to import, the file corrupt or the sound will not play. In the Flash Pro 5.5 version it can only be viewed with sound but will not import so it cannot be converted, the ne

    Anyone have a clue how I can open or convert the Adobe Connect FLV file?

    I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
    The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

  • Issue with import master data from BW info object using DM

    Hi All,
    We have master data loads on weekly basis.
    One of them, product master data is loaded from 0material using DM package.
    While loading the attributes we exclude couple of Products based on the attributes (say Product sub family)
    ex - Having conversion file which excludes product sub family - ML. so all the products under that sub family are excluded from the load.
    Hierarchy load - How can we skip the products which are excluded during attribute run?
    For the first hierarchy load, we copied all the product ID which are part of product sub family - ML and entered in conversion file "NODENAME" and "PARENT" to skip.
    But during the subsequent runs, whenever we have a new  product under Family ML the hierarchy job fails. Attached the error. we then manually enter that product to be excluded in the hierarchy load and the job runs fine.
    Is there a way to automate this process.
    Version - BPC 10 SP 17 .NET 3.5
    Appreciate any thoughts on this.
    Thanks in advance/
    Raghu

    Thanks for your response.
    We are currently using the first option you have mentioned. But the problem is when we have new product coming in BW (which is part of attribute we skip while loading attributes from BW to BPC) we manually need to add that product to skip in hierarchy conversion file also.
    As i can see, the selection option to skip is available only while loading the attributes but not for hierarchy load.
    Please correct me if am wrong.
    Regards,
    Raghu

  • Issues with importing from excel

    I have been running into a several issues with importing from Excel.
    First my configuration
    I am running SQL Developer ver 1.5.5 Build MAIN-5969
    I am on a Windows XP Professional Version 2002 with Service Pack 3
    I am importing into an Oracle 10g database.
    1. SQL Developer doesn't work on Excel 2007, I have to save all my files into Excel 97-2003 format before I can use them.
    2. If I run into an error loading and stop the process, SQL Developer doesn't release the Excel file and I get a sharing violation if I try to save the spreadsheet without closing SQL Developer.
    3. I have found that I have to set print area to the area I want to work with, otherwise the import wizard tries to keep adding rows.
    4. When using the Import wizard, it keeps adding commas on fields with numerics unless I specify the column in excel as text. Currently the column is formatted as General in the spreadsheet or I can change the wizard format to say the column is an integer, but it actually is just a code field with numeric characters so it may have leading zeroes that I need to keep.
    This might be related,
    I have a column in excel defined as text but only contains numerics. It is of length 4, but the wizard sets a precision of 5 with a datatype of VARCHAR2. If I try to change it to 4, I get an error saying the field is not large enough. Yet, when I do a LEN on the column, it only gives me a 4. I have other fields in the same sheet that a 3 position numeric and 2 position numeric and those are fine. I am thinking this is related to the comma being inserted in a numeric field for anything greater than 3 positions.
    5. Importing excel dates to oracle dates doesn't work. I have to convert the excel date column to text then import as a VARCHAR, then convert to Date once in the database.
    6. The default of nullible is not set on any columns and I have to set them before the import. (I would prefer it set to nullible and I have to uncheck the box to make it not nullible. I would prefer to import all of the data and then deal with the nulls after they have been pulled in)
    7. When I select header columns included it uses that as the column names. Is it possible to do the name length check then? It has bit me a few times where I try to import and forget to check the name length and then I get an error when I start running the import.
    8. If one of the columns to import has all nulls, then the precision comes out to 0 and if it isn't changed an error occurs on import. Could this situation default to a precision of 1?
    9. It would be nice if there was a completion message displayed and a cancel option while running.

    On point 3.
    I have a column in excel that consists of numbers. 4 digit numeric codes. Ex, 1111, 2345, etc
    The column's format is general. It displays as just 4 numbers.
    When I start the wizard initially, the column appears with data as 1,111, 2,345, etc, on the Data Preview screen.
    It determines the precision to be 5 on the column definition screen.
    If I change the precision to 4 then continue, that field will error out when I verify with "not big enough to hold the data in source columns"
    If, I change the excel column to a TEXT column.
    Excel still displays as 1111, 2345, etc
    The wizard then displays the same data 1111, 2345 on the Data Previeiw screen
    Yet, when I get to the column definition screen it still sizes it as a 5
    If I change it to a 4, I get the same error when verifying.
    If I leave them alone as 5, then it processes just fine.

  • Importing User settings from one CC user into another

    Hi There,
    I want to import user settings from one account, then use those as a base to setup user setting for another. IE I want to use my settings from work [which I did not pay for] and use that as a starting point for my personal user account at my home office [which I did pay for].
    I'm concerned about messing up my work settings + at home I'm on a laptop, not a 2 display tower.
    Specificaly, its the custom keyboard, sequence and output, and loging colums/metadata display settings that I'd love not to have to setup from scratch, again.
    Also, I have co workers who prefer my settings and I'd like to share these with them- but don't want them to be signed in as me, and messing me up accidentaly.
    Many Thanks
    David

    OK so this does not work. I'm running CC, on OSX 10.8.3.
    For those that don't know, in order to reveal the library folder in OSX 10.7+, you need to either enter this into terminal:
    Permanent Reveal:
    chflags nohidden ~/Library/
    Permanent Hide:
    chflags hidden ~/Library
    Or hold down option key + finder/go, for temporary reveal.
    So after doing this, and coying over the directories Jax mentioned [+ '7.0' folders, as I'm in CC], I'm still not getting the keyboard mappings, just the defaults.
    I've just synced with my work account, and brought up another issue: My scratch disks and media paths are all different on my home office, and I don't want to have to reset those everytime I switch from one location to another.
    If I could get what Jax sudgested to work, that would be an exelent work arround for this situation. Otherwise its a feature request for managing syncing between multiple accounts...
    Thanks again Jax for tyring to help

  • Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Urgent please
    anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Sounds like the folder Write permissions issue described here with a solution:
    "Some import operations were not performed" from camera import

  • How do I import IE settings from a different drive letter on the same computer?

    I have switched to a new computer since my old motherboard went flaky. I took my old C drive and made it the secondary hard drive since I wasn't sure if win2k would boot properly from the old installation. I have IE installs on both C and D drives and i want to import my settings from the D drive. Firefox doesn't seem to allow setting a path when using the import function. Any suggestions?
    Chris

    Hi,
    You need to log into his account and look, under the Movies folder, for iMovie Events. Inside, you'll find folders with the events names and still further will be the movie itself. Copy each to an external media or use the Shared folder so both accounts can reference them.
    Another option would be to attach an external HD and via iMovie (Events Library pane) move them to the new disk. You would preserve the thumbnails and analysis already performed on the videos.
    Good luck!

  • A strange issue with importing avi video

    I have a rather strange issue with importing avi files (which playback normally in other programs) into CS4. When I import an avi recorded from my camera into CS 4 in the preview the sound is played back normally, but the video itself is weird. Pretty much roughly first 5% of it are stretched over the whole spand and slowed down to fit. So the video of 4 minutes will play sound normally for 4 minutes, but replay only 10 seconds of video VERY slowly. I'm a bit puzzled because I've used the same camera with CS3 and never encountered this problem. breaking apart and speeding up the video obviously didn't work because the video only displays the first 5 recorded seconds no matter the speed, tweaking with presets didn't work either.

    subtlemolotov wrote:
    I obviously know it's a photo camera, I own it.
    The point is it's something we needed to know to answer your question.
    subtlemolotov wrote:
    Well I've found a very unprofessional solution.
    "An unprofessional solution?" Kind of like shooting video with an still camera.....

  • Serious resolution issues with After Effects CC (2014) on Windows 8.1 Pro on Dell Precision M3800 laptop??

    My new company installed Adobe Creative Cloud (There was some annoying Proxy issues at first, because of the seriously tight I.T policies) but we are having some serious resolution issues with After Effects CC 2014 (also have this resolution problem with Adobe Premiere, Media Encoder, Muse) on Windows 8.1 Pro on a Dell Precision M3800 laptop with icons and interface looking too small and hard to see, is there a fix, an update or a work around, can anyone help?
    Any help will be appreciated!
    k.regards
    Ramon

    Hi Todd is there a time-frame for this fix, there is a lot of pressure on me, because I convinced my company to get the Creative Cloud and quite a lot of the CC software is not compatible with the latest Windows 8.1 OS.
    Is there at least a work around, until this big fix comes along?
    k.regards
    Ramon

  • Problems with importing text messages from PC Suit...

    Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
     I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
     Thanks for your help

    Most phones only allows importing of draft and archived box for SMS.
    To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
    If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
    What's the law of the jungle?

  • Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    haben
    From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
    A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
    Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
    User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
    presets there for the QuickTime choice there.
    What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30)  or something else? Do you know if this camera is recording with a variable or
    a constant frame rate?
    Please review and consider and then we will decide what next.
    Thank you.
    ATR

  • I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

    I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

    Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
    Just go to the Library module, search for the desired photos, and resume working on these photos.

  • Issues with loud sound settings over headphones.

    My Ipad 2 has been having some issues with the sound settings when I put the volume up loud. When I go past a certain level there is a "popping" sound and the volume cuts out all together.  If I reduce the volume this popping sound happens again and the volume comes back on.
    This only happens through the headphones, and doesn't happen with the external speaker.
    Have I stuffed up one of the settings? Is this an OS update issue or do I need to replace the headphone jack?
    I have reset all the settings, but haven't done a complete restore yet.
    Thanks

    Why is everybody posting Flash Player questions in the Shockwave Player forum???

  • JDev 10.1.3.3 - issues with imported Business Components

    Hi,
    I have got some issues with importing Business Components in JDev 10.1.3.3.
    I cannot discover/use the imported components.
    What I did is the folowing:
    1. In a existing project I extended the default base-classes to create our own layer
    2. created a project called ModelShared
    2a. configured the project to use the base-classes I created in step 1
    2b. created an entitybased-viewobject (RefCodesByDomain)
    2c. created bc deployment-descriptors
    3. created a project called RelatieModel in the same workspace as ModelShared
    3a. added dependencies to the deployment-descriptors as well as the project created in step 2
    3b. configured the project to use the base-classes I created in step 1
    3c. imported business components
    Although I did not recieve any errors during the import of business components, I am unable to add the vo (RefCodesByDomain) to a service.
    I do see the package which contains the vo but is has no entries.
    Importing the business components to a new BC Project in a seperate workspace did succeed (I could reuse the vo).
    I tested a little further and the folowing occurred:
    4. I created a new vo in the ModelShared Project
    5. I deployed the ModelShared
    6. Restarted JDeveloper
    7. Got the folowing error message in the console window when expanding a service in my datacontrol pallette:
    INFO: oracle.adf.share.config.ADFConfigFactory No META-INF/adf-config.xml found
    1-sep-2008 13:23:27 oracle.adf.dt.controls.DataControlsTreeWillExpandListener treeWillExpand
    FINER: THROW
    java.lang.NullPointerException
            at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.init(JUDTViewReferenceAccessorDefinition.java:108)
            at oracle.adf.dt.objects.JUDTViewReferenceAccessorDefinition.<init>(JUDTViewReferenceAccessorDefinition.java:98)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.createViewObjectDefinition(BC4JDataControlDefinition.java:228)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.addViewObjects(BC4JDataControlDefinition.java:208)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.loadStructure(BC4JDataControlDefinition.java:110)
            at oracle.adfdt.internal.meta.bc4j.BC4JDataControlDefinition.getStructure(BC4JDataControlDefinition.java:407)
            at oracle.adf.dt.controls.treemodel.jsr227.JSR227DataControlTreeNode.loadChildNodes(JSR227DataControlTreeNode.java:129)
    8. In my other "fresh" bc project I was able to use the newly created vo.
    9. When I added a VO to my shared project, all projects that are refering to the shared project loose their vo's in the data-controlpannel
    Do you have any suggestions?
    Regards,
    Romano

    Hi,
    since this appears to be a WebCenter related issue, I suggest to try the Webcenter forum WebCenter Portal or to log a bug
    Frank

Maybe you are looking for

  • Monitoring object for Supply Chain management and Warehouse

    Hi , i am monitoing In ERP.Like going to DB2 then there i go to sements -->detals analysis .there i took owner SAPR3 and i took data like below Description: SD Document: Billing Document: Rebate Index Type : INDEX Name : VBOX___0           MB :91,359

  • Erec - inserting a website link in a letter written in SMARTFORMS

    Good afternoon folks We are using erecruitment and our correspondence is written using transaction SMARTFORMS. In one of the letters it is required that we include an interactive website link in the letter eg: when click on the link it takes you to t

  • How to stop flash player showing errors?

    Hi, does anyone know how to stop flash player showing runtime errors? Is there some configuration option, or is it possible to write a global error handler which would catch all the uncaught exceptions so they don't get displayed to the users? In my

  • My Razr restarts all the time

    My razr has been restarting itself every 5 minutes for the last 24 hrs. It started doing this while on the charger. It also didnt charge. I deleted a bunch of programs that always started themselves automatically. I started my phone insafe mode and i

  • How to resolve white screen of death

    My macbrook pro has been working just fine and then today when I opened it it had the white screen of death. Not sure how to resolve this issue.