Issue with informatica 8.1.1 sp4 installation

Hi All,
Here is the Issue.
I am trying to install informatica server 8.1.1 SP4 patch and already installed informatica server 8.1.1.
After installing 8.1.1 SP4 patch few minutes, it asking for insert new media.
"Pls insert new disk1 or select Browse to locate manually.
The software i have downloaded from oracle.com for BIAPPS installation and the software is in my desktop and i am trying to browse the disk1 folder i.e installation 8.1.1 SE, but it is not recognising and throws error,
" incorrect media volume."
Can some body pls help me out as i am struckup here from last 2 days
Thanks
Srikanth

HI Srikanth/A . J
I deleted the folder d:\informatica\powercenter8.1.1\server and renamed d:\informatica\powercenter8.1.1\server_Bak_from_SP5 as
d:\informatica\powercenter8.1.1\server and started the SP5 server installation again.
It worked for me then.
Thanks,
Arun sharma.

Similar Messages

Issues with windows 7 after Labview 2012 installation

Hi
I am having some issues after installing Labview 2012 on machines running Windows 7. Firstly, after installing a program on a user's machine, the machine sometimes takes 20 minutes to boot up before the user can log on. The 'Please Wait' message appears during this time. This is also the case on the development machine.
Secondly, on the development machine, I am having an issue when trying to run compiled programs created in Labview. When installing, everything works fine but when I go to open the program, it appears on the task bar for a brief period before closing. It does not appear in the task manager either. I have tried this on 2 other machines with windows 7 and Labview installed and still get the same issue.
Any help on these matters would be much appreciated. Thank you

Hi
Firstly, looking at the issue with the slow Windows 7 boot up time, as Norbert_B suggested the Windows Event Log is a good starting point to find the root of the problem. The following link describes how to launch “Event Viewer” and some common problems:
http://itexpertvoice.com/home/what%E2%80%99s-taking-so-long-how-to-fight-slow-startup-times-in-windo...
Aside from that, if your computer is part of a domain, the problem may be connected with certain Windows Services that start automatically on boot up. I recommend trying the following steps:
Open up “Control Panel” go to “System and Security” then “Administrative Tools” from here launch “Services”.
Sort the list by name and scroll down to “Network Store Interface Service” right click and select “Properties”. Under the startup type dropdown select “Automatic (Delayed Start)”.
Next scroll down to the “WebClient” service again under “Properties” this time select “Disabled” under the startup type.
As for the problem with running LabVIEW executables, I have a few questions:
Do you get any error codes when it closes automatically?
Does this occur for multiple executables or just one in particular?
Does the code run without a problem within LabVIEW?
Have you tried to update LabVIEW?
What hardware are you running?
Without this information I can only think it may be caused by the Windows Data Execution Prevention (DEP) security feature. So you can try the following steps:
Right click on “Computer” and select “Properties”.
Click on “Advanced System Settings” and select the “Advanced tab, then under the performance section click “Settings”.
Click the “Data Execution Prevention” tab.
Make sure it is activated for essential Windows programs and services only, or you have an exception for your EXE.
You may also find the following link helpful on debugging applications:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/debug_apps_dlls/
Let me know if these solve the problems.
Andrew.N
Applications Engineer
National Instruments

What is the issue with Java 7 Update 6 windows installer?

Hi guys,
I know that this is not the forum to ask Java Installation issue, but I couldn't find a forum that specifically deals with such issues. Also, as the issue in hand concerns JavaFx, I thought it appropriate to post the question here. Let me begin...
I ran the installer for JDK 7 Update 6 on my Windows 7 64-bit machine, and it installed Java successfully, but no JavaFX SDK. So I uninstalled it, and ran the installer again, and it produced the same output i.e. Java installation O.K. but no JavaFX. It also didn't show any error message.
Puzzled, I looked at the system requirements for JavaFX 2.2, and it says SP1 for Windows 7. Sure my Windows 7 is not updated to SP1 yet, but JavaFX 2.1.1 was successfully installed on it, and it had same requirement ie. SP1. Since my numerous attempts to update to Windows 7 SP1 failed, I downloaded and installed separate installer for JavaFX 2.2, which the Oracle site says is for Java 6 only. Now, I am able to compile and run JavaFX 2.2 applications on my system without any problem. It has left me puzzled because if JavaFX 2.2 is compatible with my system, then why the JDK installer for 1.0.7_06 is not able to install JavaFX?
Are other users facing the same issue?
-Dinesh

Check JDK folder. You should see jre/lib/jfxrt.jar there.Yes it is there. And in Netbeans IDE, I specified the JDK home folder where it asks for JavaFX SDK folder location, and it accepted it; the IDE found all the required JavaFX SDK files in that folder as it is able to compile the program without any problem.
Thanks for pointing me to the right direction. All the while I was looking for the folder named "JavaFX 2.2 SDK", and not founding one, assumed it to be some problem with the installer.
Thanks again.
-Dinesh

Issue with CE 7.2 Trial version Installation

Hi Friends,
I was installing the trial version of CE 7.2 where the installation went smoothly until it reached the step "Install Java engine".
I am running the installation using a desktop user with admin rights.
Here is a brief information about the error,
ERROR 2010-05-25 19:02:36.867 [sixxcstepexecute.cpp:988]
FCO-00011 The step startJava with step key NW_CI_Instance_StartJava -> startJava was executed with status ERROR
telnetPort:0
name:server0
pid:4052
type:J2EE Server
restart:Yes
exitCode:1 (Forced shutdown case)
state:J2EE_STOPPING
statetext:Collecting data
startTime:2010 05 25 19:02:31
elapsedTime:0:00:05
restartCount:0
errorCount:1
cpu:0:00:00
debug:Switched off
TRACE      2010-05-25 19:02:36.820
NWDIState._assertJavaProcessStateProgress() done
TRACE      2010-05-25 19:02:36.820
NWDIState._assertJavaProcessStatesProgress() done
TRACE      2010-05-25 19:02:36.820
NWException thrown: nw.progress.startupProcessFailedError:
Java process server0 of instance CE1/J00 increased error count to 1. Giving up.
Any idea how to get going.
Thanks,
Suresh

Simon,
I did a few things that solved my problem. However there could be a bunch of reason for you to get this error
For ex, Operating System Collector error or problem with the paging etc.
Can you elaborate your problem with the following details:
1. Your observations of the errors through the SAP Management Console
2. Your machine OS and RAM details.
3. Are you going in for a fresh installations? or did you uninstall CE before?
May be I can help if you are facing the same issues, I did.
Regards,
Keerti

Issues with creative suite 6 second disk installation

The second disk to my creative suite 6 will not autorun or installi really need help spent a lot of money and i cant even use it!!!

Hi Poetjoe,
Yes , It will work for you ! If you install the product using the link mentioned above and use your Serial number to activate the product , there would be no issues for you .
Please do so and let us know if you have any other query that we can help you with.
Cheers,
Kartikay Sharma

Issue with Software updates and Magic Mouse installs

Having the same problem with Magic Mouse install as the Airport Utility Update
My machine: Mac os x; 10.5.8
My Problem: Got Magic Mouse for Xmas. Prior to getting download for Magic Mouse I checked for any software updates. It called for Airport Utility 5.4.2 and MacBook EFI Firmware 1.4. I ran the software update for each, started the install and received the message:
*The source media you are installing from is damaged. Try installing from a different copy of the source media or contact the manufacturer for a replacement.*
(When I hit OK; or what ever it asked me to do the window closed and then the Software Update window showed w/ the message:
An error occurred during installation) -Duh
This is a shared machine... I am not the administrator so I went over to the ‘administrator side’ and tried to install the update software.
It installed the EFI Firmware 1.4
It DID NOT install the Airport Utility upgrade. It gave the same message:
*The source media you are installing from is damaged. Try installing from a different copy of the source media or contact the manufacturer for a replacement.*
I then tried to download the Magic Mouse Download. Went to apple.com for download:
http://www.apple.com/downloads/macosx/apple/firmware_hardware/wirelessmousesoftw areupdate10forleopard.html
I got the download, then ran the install guide:
Intro/readme/license/destination select / installation type/installation
got to about 87% installed... and got the message:
Install Failed (yellow triangle):
The source media you are installing from is damaged. Try installing from a different copy of the source media or contact the manufacturer for a replacement.
What now?
I don’t understand how the source media can be damaged... it comes right off the apple site. Is there something on my end and if so WHAT?
Any help/direction appreciated.
Karen

I don't have a right arrow key issue but I do have a problem where the center wheel click option gets completely lost. I have hit set to use Expose all windows.
Well, I'll be going around just fine...the I notice I loose center wheel click. If I try and change center wheel click in System Center, then I'm really screwed. Then any thing I left click becomes selected and I have to drag it all of the place.. no way to release. I'll disconnect the usb receiver for the mouse.... a Logitech wireless laser mouse, MX 620.
I never had a problem until the Jan update, then the latest this week seems to have made it even worse.

Issue with OBIEE 11g(11.1.3) Installation

I have installed OBIEE 11g last evening. I was able to connect to the dashboard and run a simple report also – all before shut down. Now when I try to access OBIEE 11g thru port :9704 after starting the BI services, I am getting the following error.
“Error 404–Not Found
From RFC 2068 Hypertext Transfer Protocol — HTTP/1.1:
10.4.5 404 Not Found
My Weblogic server is working fine but im not able to access EM or ANALYTICS.
When I click Programs > OBI > Start BI Services it opens 3 wndows and says weblogic server is started and Im able to login to Weblogic server via “http://localhost:7001/console”.
When i start my machine the following services are started automatically:
1) Oracle WebLogic node Manager
2) OracleDBConsole
3) Oracle Service
4) OracleOraDB11g_home2_TNSListener
The following services are not started:
1) OracleDB11g_home2_ClrAgent
2) OracleJobScheduler
3) Oracle Process Manager(instance1)
4) Oracle VSS Writer Service
can you pls let me know how to start the Weblogic Admin Server?
I have even tried to reinstall and when the installation completes im able to login to “EM”, “weblogic” and “Analytics” also, but once i restart my machine im not able to login to “Analytics” as well as to “EM”.
The process im following is:
When i start the BI Services from Start->Programs->Oracle Business Intelligence->Start BI Services, i get a popup window where it asks for weglogic user and password, then i have entered the user as “weblogic” and has give the password entered at the time of installation, then 2 popups opens and it runs several java files, then im able to login to weblogic but no luck with “em” or “analytics”.
If i try to login to weblogic and try to start the “bi.em”, “biadminservices” i get java error message.
Even i dont get Oracle Logo on the Admin tool also.
Can you pls let me know the repository password also as i have tried with “Admin123? but no luck.
Every time when i do the installation im able to access all the services for the first time but once i restart the machine then only weblogic will be working.
I have installed OBIEE 11.1.3 on Windows 7 Ultimate N(32 bit) OS with Oracle11g Database
Pls let me know if im missing anything here?
Appreciate your help

This is a really basic question... but how much memory do you have, and how long have you waited for all the processes to load? On a Windows XP Virtual Machine with 3GB, I have waited 20 minutes before being able to access. And until then, you will see the error you have received.
Just a thought...

Imcompatibility issues with Photoshop Elements 4.0 Software Installation and Windows Version 7.0?

Does anyone have a solution so that I can begin using this software immediately? Assistance with this problem would be greatly appreciated. Thanks!

Kalari12 Mylenium has a point that the software may simply not function as Windows 7 was not even in the beginning of development when Photoshop Elements 7 was created. You are welcome to post the exact error message you are receiving and I can check our knowledgbase.

Issue with ARD 3.0 not pushing out Installs, Says its installing but not

Issue with ARD 3.0 not pushing out Installs, Says its installing but not
Has anyone seen this. It seems to happen with ARD 3, have not seen this in ARD 2.
I go to the Install Packages on Target Computers, put in: 10.4.7 Combo (for the correct CPU, PPC or Intel), security updates, QT 7.1.2, etc.
Push it to Macs I can connect to, observe and control.
The progress bar copies the files (in some instances it does not) and then it just hangs there, bar does not move, Installs never finish, not good, very odd.

Is it the same clients that have the problem every time? Are those clients doing anything cpu intensive? Have you tried rebooting the affected clients?
Maybe try a smaller package on those clients.

Multiple issues with new installation

I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
Thanks in advance.
EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
Last edited by ugugii (2009-06-14 00:57:37)

People are probably going to want to know the make/model of the lappy before they can
help.
Deej

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Issues with Shockwave 11.5.2.602 / 11.5.6.606 MSI installer

<UPDATE 8/3/09> Nearly all of the issues mentioned below are still present in the MSI installer for 11.5.6.606 - the only one that Adobe have fixed is the one where the MozillaPlugins 'Version' value is left blank by the MSI by default - this is now created correctly, but all of the other issues remain.
Personally I have given up trying to use this MSI package to deploy Shockwave until Adobe get their act together - instead I am using a wrapper to wrap the Shockwave executable inside an MSI file and deploying it that way, although this is not ideal.
I have created an MST file which will fix the MSI installer for version 11.5.6.606, which I will post to another forum shortly, but I am not planning to keep it updated for future versions as I don't really have the time.
Hi,
I've tried submitting the following via the Adobe Customer Support portal and via the Feature Request/Bug Report form, but the first told me that I needed to 'get in touch with Adobe Enterprise Solutions team for getting help' and that 'to get in touch with them you have to purchase a contract', and the second resulted in a bounced email address saying that '[email protected]' 'does not exist at the organization this message was sent to'.
In short, attempting to contact Adobe to report issues with their installers sucks, and I am posting this here in the vain hope that someone at Adobe might read this message and possibly forward it to the relevant people. Some of the issues have already been reported here on this forum, but some of them are new, and I guess others might be interested in them too.
Hi,
I would like to report some issues with most recent version of the Shockwave installer, available in MSI format from the following location:
http://www.adobe.com/cfusion/entitlement/index.cfm?k=4E6102EB-DA7C-2795-C744826EFDE2A098&l oc=en_us
This is the installer for version 11.5.2.602, with a digital signature dated 06 November 2009 10:52:21
When downloading this version of the installer in Windows Installer (MSI) format, the following issues manifest themselves, most of which are not a problem when using the Full EXE installer available from the same page.
First of all, when installing the MSI file using Group Policy Software Deployment, if you log on to the computer after the MSI file has been deployed and view a web page that contains Shockwave content, you receive the following errors in the Windows event log:
Event Type: Warning
Event Source: MsiInstaller
Event Category: None
Event ID: 1004
Date: 16/12/2009
Time: 16:51:23
User: CRGS\DefaultUser
Computer: ITO01
Description:
Detection of product '{7D0F2155-D7D3-42CE-903F-684ADD77FF89}', feature 'Adobe_Shockwave_Player_', component '{E89F323D-7BDB-46E1-A0FD-6227821F94EA}' failed. The resource 'C:\WINDOWS\system32\config\systemprofile\Application Data\Adobe\' does not exist.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Warning
Event Source: MsiInstaller
Event Category: None
Event ID: 1001
Date: 16/12/2009
Time: 16:51:23
User: CRGS\DefaultUser
Computer: ITO01
Description:
Detection of product '{7D0F2155-D7D3-42CE-903F-684ADD77FF89}', feature 'Adobe_Shockwave_Player_' failed during request for component '{3D3697FC-DB90-46D8-9ED4-5D54B4901F62}'
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
If you are logged on as an Administrator, then the computer will immediately attempt to 'repair' the Adobe Shockwave Player installation in order to create the missing folder 'C:\WINDOWS\system32\config\systemprofile\Application Data\Adobe\', which leads to a significant delay in the initialization of the Shockwave content on the web page. If you are logged on as a non-Administrator, the errors will still appear, but the 'repair' operation will fail due to insufficient permissions to create the above folder.
I have done some testing and it seems as if this problem can be easily resolved by removing the code from the installer which tells it to create an empty folder in the 'Application Data' folder called 'Adobe\Shockwave Player 11'. This code seems to be entirely unnecessary, as no files are created inside this folder as part of the installation, and I have removed it successfully from my own copy of the MSI without it causing any issues. I have found some other people who are also experiencing this problem in the following forum post:
http://forums.adobe.com/message/2379350 (post number 8)
and since this 'repair' operation causes all customised registry settings to be reset back to defaults as part of the repair, it would be very helpful if this 'feature' could be removed from future versions.
Secondly, there are a number of registry keys which are created incorrectly by the MSI installer when the above 'repair' operation takes place, which need to be corrected to prevent further issues from occurring:
Under '[HKEY_CLASSES_ROOT\CLSID\{1F3CB77D-D339-49e0-B8E4-FECD6D6F8CB8}\LocalServer32]', the 'default' value is set to the following by the MSI:
C:\WINDOWS\system32\Adobe\SHOCKW~1\SWHELP~1.EXE"
(Please note that there is a double quotation mark at the end of the value, but not at the beginning)
Whereas the executable installer creates the value as follows:
"C:\WINDOWS\system32\Adobe\Shockwave 11\SwHelper_1152602.exe"
According to a forum post (http://forums.adobe.com/message/2379350, post 15), this causes DCOM errors when Shockwave is launched, if the MSI 'repair' has taken place as described above.
The above registry value should be set to the following in the installer's Registry table:
"[INSTALLDIR]Shockwave 11\SwHelper_1152602.exe"
so that the MSI installer works the same as the executable one.
Under '[HKEY_CLASSES_ROOT\TypeLib\{6EF568F4-D437-4466-AA63-A3645136D93E}\1.0\0\win32]', the 'default' value is set to the following by the MSI:
Adobe\SHOCKW~1\SWHELP~1.EXE
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Adobe\Shockwave 11\SwHelper_1152602.exe
Also, under '[HKEY_CLASSES_ROOT\TypeLib\{6EF568F4-D437-4466-AA63-A3645136D93E}\1.0\HELPDIR]', the 'default' value is set to the following by the MSI:
Adobe\SHOCKW~1\
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Adobe\Shockwave 11\
Once again, the above registry values should be set to the following in the installer's Registry table to fix the issue:
[SystemFolder]Adobe\Shockwave 11\SwHelper_1152602.exe
[SystemFolder]Adobe\Shockwave 11\
Under '[HKEY_CLASSES_ROOT\CLSID\{166B1BCA-3F9C-11CF-8075-444553540000}]', the 'default' value is NOT SET by the MSI by default:
Whereas the executable installer creates the value as follows:
Shockwave ActiveX Control
This value should be set in the installer's Registry table to fix the issue.
Under '[HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Shockwave 10\location\common]', the 'default' value is set to the following by the MSI:
Macromed\common\
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Macromed\common\
Also, under '[HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Shockwave 10\location\coreplayer]', the 'default' value is set to the following by the MSI:
Macromed\Shockwave 10\
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Macromed\Shockwave 10\
Also, under '[HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Shockwave 10\location\coreplayerxtras]', the 'default' value is set to the following by the MSI:
Macromed\Shockwave 10\xtras\
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Macromed\Shockwave 10\xtras\
The above registry values should be set to the following in the installer's Registry table to fix the issue:
[SystemFolder]Macromed\common\
[SystemFolder]Macromed\Shockwave 10\
[SystemFolder]Macromed\Shockwave 10\xtras\
The MSI installer does not create '[HKEY_CLASSES_ROOT\.dcr]', '[HKEY_CLASSES_ROOT\.dir]', or '[HKEY_CLASSES_ROOT\.dxr]'
Wherease the executable installer creates all three of these keys and populates them all with the following 'default' value:
"Content Type"="application/x-director"
These keys and values should be set in the installer's Registry table to fix the issue.
The MSI installer creates a value under the following registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OptionalComponets\SwDi r]
However this registry key is obviously misspelt (missing an 'n' in 'OptionalComponets') and should read as follows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OptionalComponents\SwD ir]
This key name needs to be changed in the installer's Registry table to fix the issue (also pointed out in the following forum post: http://forums.adobe.com/message/2379350 (post number 10)).
Under [HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@adobe.com/ShockwavePlayer], the 'Version' value is left blank by the MSI by default:
Whereas the executable installer creates the value as follows:
1152602
This registry value should be set to the correct version in the installer's Registry table to fix the issue.
Finally, the MSI installer creates a number of registry values under the following path:
[HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@adobe.com/ShockwavePlayer\Mime Types]
These values are *in addition* to the values created under the following path:
[HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@adobe.com/ShockwavePlayer\MimeTypes]
(Note there is no space between 'Mime' and 'Types' in the second key path)
The executable installer *only* creates registry keys under the 'MimeTypes' key, and it seems as if this is the correct formatting for the key (also pointed out in the following forum post: http://forums.adobe.com/message/2379350 (post number 11)).
The unnecessary 'Mime Types' registry keys and values should be removed from the installer's Registry table to avoid any potential issues.
I am sorry that this is such a long list, but it seems as if a number of things have been changed in the transition from 11.5.1.601 to 11.5.2.602, and it would be very helpful if these changes could be put back to how they were before, so that the MSI and the executable installers function in the same way as much as possible.
Message was edited by Borgquite - added 11.5.6.606 update

Have posted an updated version of the MST to my webspace here:
http://homepage.ntlworld.com/minkus/shockwave/shockwave115606mst2.zip
This new version fixes the following issues (changes to this version in bold):
MsiInstaller repair & errors on first run as non-admin (removes 'AppData' directory entries)
DCOM errors once Shockwave is installed (adds double quotes to the beginnning of LocalServer32 value)
Incorrect TypeLib paths in the registry (fixed to use built-in [SystemFolder] property)
Default CLSID description value missing (set to 'Shockwave ActiveX Control', as per the executable installer)
Incorrect Shockwave 10 paths in the registry (fixed to use built-in [SystemFolder] property)
Misspelt 'OptionalComponets' registry key (renamed to 'OptionalComponents')
Missing .dcr, .dir, .dxr Content Type registry values (included in the executable installer)
Fixed incorrect AppID registry key (set to use installer's [VERSION] variable)
Removed 'Launch SWDNLD.exe' shortcut created in Programs subfolder (people don't want this - see here)
I have tested this on my network and it all seems to work fine. Unfortunately my original plan to use the executable installer didn't work out as it does not include the Shockwave 10 compatibility components described here and here, so it looks like I'll have to keep this MST file up to date with the latest versions until Adobe fix the problems themselves...
If you want to see the changes that I have made, load up Adobe's 11.5.6.606 MSI file in Orca, then use Transform / Apply Transform to apply the MST, and look for the entries in green.
Please post any feedback to this thread, and I will try to respond if I can help!
Chris Hill

Bootcamp windows 8.0 pro installation issue with early 2015 Macbook Pro

I am having this issue with installing Windows 8.0 pro (and 8.1 pro) on my early 2015 MacBook pro vs. Bootcamp. I have tried different method for multiple times and all failed. Any help is appreciated.
Hardware: (1) early 2015 MacBook Pro with 128GB (13 inches) , (2) Sony USB DVD burner. (3) Two 16 gb flash drive 2.0 version from two different manufactures
Software: (1) 8.0 Pro ISO on flash drive from Microsoft (I have two copies) (2) 8.1 Pro downloaded from Microsoft website.
Note - I was able to download the bootcamp supporting files successfully and copy to a USB flash drive.
Method 1 - Create the installation disk from ISO on flash drive and also tried copying ISO on hard drive (desktop)- failed.
I have a 16 GB flash drive (2.0V) connected
ISO is a valid 8.0 pro copy from Microsoft came on a flash drive.
I have the windows 8.0 pro ISO on a flash drive and plugged in.
Issue - It gets to around 50% of "Copying Windows files..." and then doesn't go any further. 8 hours later, still stuck at around 50%. I also tried to do the copy ISO from desktop. failed as well.
Method 2 - I repeat the above steps with Windows 8.1 ISO downloaded Microsoft website - failed. Stuck at 50% copying windows file for 9 hours.
Method 3 - I burned the Windows 8.0 pro ISO to a DVD and try to do the installation through a DVD instead. DVD was successfully created.
I was able to perform the partition. When the computer reboots, it starts the window installation. However, it got stuck at 7% forever. I tried this multiple times and failed.
Method 4 - I download a 8.1 Pro ISO from Microsoft website, I burned it to a DVD. Repeat method 3, Again, windows installation stuck at 7%.
Method 5 - I called Apple. - What they told me is pretty much repeat the above steps. Still failed.

The ISO file(s) being downloaded seem to be corrupted. Can you use Microsoft FCIV tool - https://support.microsoft.com/en-us/kb/841290?wa=wsignin1.0 ?
The DVDs should be burnt at the recommended rate for the physical media. DU should be used for burning the DVDs.
Reference Disk Utility 12.x: Burn a disk image to a CD or DVD and Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support.

SAP R/3 4.6 Installation issue with SAPMMC

Hi ALL,
Hi ,
We are installing SAP 4.6 C SR2 on AIX and Window environment.
Both CI and DB Instances are in AIX box and DI is on Windows env.
we completed our SAP R/3 4.6 c sr2 CI and DB Installations with all the Patch levels on AIX 5.3 p570.
Now we are working on SAP Application Server Installation, We Configured SAMBA on AIX Boxes and able to communicate with AIX from Windows application servers.
During the Application Installations , we followed the domain install , we got some minor issues and we fixed those, finally the installation went fine and successfully.
Now we are facing one Issue with SAPMMC- When we try to start the sap from SAPMMC the status remains in "YELLOW" with "Running but dialog Queue info unavailable" Error, Even r3trans -d working fine and we are able to logon to the SAP system through Application Server and run
transactions .
we applied note #72248 . but we still running the same problem.
I would really appreciate If any one provide some sugessions , on this issue.
Thanks in advance
Nara.
[email protected]

Hi.
I've just carried out this architecture. You have to check 2 things:
1- Are your DB software levels the same? (AIX + Windows)
2- Have you checked connectivity from client to DB server?
Regards,
Fatih Erten

Labview 2012 Installer builder issues with Windows 7 64 bit

I have a clients project application program I am working on and am having a lot of trouble getting installed applications to work on Windows 7 properly. The Labview Installer sets the default installation directory to "c:\Program Files\" on Windows Xp and on Windows 7 64bit this defaults to "C:\Program Files (x86). When I install the application on Windows 7 and run it, because Windows 7 64 bit unreasonably protects this directory and every folder under it, if you try to write file to any subdirectory under it (like a reports directory), windows 7 will not let the file write to the directory and the file(s) disappear and you get permission errors. This has been difficult to address. Even logging in as administrator, I have difficulty changing the folder permissions. In addition, when I am in the file write process, if the default directory is coded to come up in the file Open/Save dialog, will not properly
go to and display these protected directories. So thinking that OK, I'll just chage the install directory to something direct to the C: drive and not the Program Files (x86) directory, so I have better control of the folder permissions. Now the Installer build gives errors. It built, but the install fails. Looks like National did not test this for Windows 7 very well. I have run into just about every issue possible with Windows 7 and Labview. Clearly Labview was not very well tested with Windows 7 6 bit. I do not have the Internet toolkit added to the application, only the VISA 5.2 driver. Anyone else having application issues with Labview and Windows 7 and have ideas how to work around this??
Attachments:
BuildErrors.txt ‏11 KB

It's no NI's fault and has nothing to do with 64 Bit either. It is something MS changed starting with Vista, namely tightening security of the whole system to a similar level as was usual on more professional OSes like Unix 20 years earlier. A user has not rights anymore to write into the location where applications are installed. This is for one reason to protect installed applications from being modified by malicious code.
Instead every application should write its runtime data in one of the user writable loacations such as the user's Documents directory for data files, or in the user's or the machine's configuration directory for configuration settings. For single installations you could always set the directory which your application got installed into to be user writable by changing the rights of that directory afterwards but for applications that get installed on normal user computers this is a VERY hacky and discouraged move. Same about installing your application into the root of your system drive. I think it was an oversight by MS to not protect that directory too from user modifications, but was most likely unavoidable to allow DOS application installations to still work.
LabVIEW has functions to retrieve a whole bunch of those preconfigured and user writeable locations and you really should change your application to make use of those locations, instead of trying to write into the installation directory or installing the application into the root location of the system drive, if you want to be compatible with Windows Vista/7/8.
Windows 7 also requires for a number of actions such as installing programs or drivers so called elevated rights. This means that even if you are logged in as administrator you have to explicitedly provide the admin password again to be able to perform the action. This can be done by starting the program as administrator, when this is available in the right click pop-up menu, and is also sometimes done automatically for applications that Windows determines to need those rights such as setup programs for installations.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Issue with informatica 8.1.1 sp4 installation

Similar Messages

Maybe you are looking for