Issue with Initializing ODSI Profiler MBean.

Hi All,
We have an ODSI 10Gr3 cluster of 2 servers, with Oracle Data Service Integrator Profiler MBean deployed to the Admin server. The Profiler was configured properly and working fine, all of a sudden we see there is an initialization error on managed server 2 as shown in the below stack. Managed server 1 doesn't have any of the errors reported.
On Managed server 2 we see the following error: (I am not able to post the full stack)
A Security Provider Exception occurred in a non-default AuditProvider com.bea.common.security.internal.legacy.helper.AuditChannelConfigHelper_myrealm_ODSIProfiler>
java.lang.Exception: Audit Profiler not initialized properly
at java.lang.Thread.run(Thread.java:619)
java.lang.Exception: Audit Profiler not initialized properly
at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:103)
The mapping expression for /XXXXXX/XXXXX in the update operation for update to data service ld:XXXX has an unexpected type quantifier. (expected 1 but mapping expression is ?)>
java.lang.Exception: Audit Profiler not initialized properly
at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:103)
Please advice.
Regards
Edited by: user738507 on Jun 2, 2011 1:49 PM
Edited by: user738507 on Jun 2, 2011 1:52 PM

We have deployed the DSPProfilerAudit.jar file in our troubled server. The error in nohup file I got is the same as before...please advice
<Jun 28, 2011 5:39:57 AM EDT> <Error> <Security> <BEA-090058> <A Security Provider Exception occurred in a non-default AuditProvider com.bea.common.security.internal.legacy.helper.AuditChannelConfigHelper_myrealm_ODSIProfiler>
java.lang.Exception: Audit Profiler not initialized properly
     at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:99)
     at com.bea.common.security.internal.legacy.service.AuditChannelImpl$V1Adapter.writeEvent(AuditChannelImpl.java:103)
     at com.bea.common.security.internal.service.AuditServiceImpl.writeEvent(AuditServiceImpl.java:83)
     at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy7.writeEvent(Unknown Source)
     at weblogic.security.service.Auditor.writeEvent(Unknown Source)
     at com.bea.ld.server.audit.AuditDispatcher.doDispatch(AuditDispatcher.java:100)
     at com.bea.ld.server.audit.AuditDispatcher.run(AuditDispatcher.java:84)
     at java.lang.Thread.run(Thread.java:619)
java.lang.Exception: Audit Profiler not initialized properly
     at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:99)
     at com.bea.common.security.internal.legacy.service.AuditChannelImpl$V1Adapter.writeEvent(AuditChannelImpl.java:103)
     at com.bea.common.security.internal.service.AuditServiceImpl.writeEvent(AuditServiceImpl.java:83)
     at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy7.writeEvent(Unknown Source)
     at weblogic.security.service.Auditor.writeEvent(Unknown Source)
     at com.bea.ld.server.audit.AuditDispatcher.doDispatch(AuditDispatcher.java:100)
     at com.bea.ld.server.audit.AuditDispatcher.run(AuditDispatcher.java:84)
     at java.lang.Thread.run(Thread.java:619)
java.lang.Exception: Audit Profiler not initialized properly
     at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:99)
     at com.bea.common.security.internal.legacy.service.AuditChannelImpl$V1Adapter.writeEvent(AuditChannelImpl.java:103)
     at com.bea.common.security.internal.service.AuditServiceImpl.writeEvent(AuditServiceImpl.java:83)
     at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy7.writeEvent(Unknown Source)
     at weblogic.security.service.Auditor.writeEvent(Unknown Source)
     at com.bea.ld.server.audit.AuditDispatcher.doDispatch(AuditDispatcher.java:100)
     at com.bea.ld.server.audit.AuditDispatcher.run(AuditDispatcher.java:84)
     at java.lang.Thread.run(Thread.java:619)
java.lang.Exception: Audit Profiler not initialized properly
     at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:99)
     at com.bea.common.security.internal.legacy.service.AuditChannelImpl$V1Adapter.writeEvent(AuditChannelImpl.java:103)
     at com.bea.common.security.internal.service.AuditServiceImpl.writeEvent(AuditServiceImpl.java:83)
     at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy7.writeEvent(Unknown Source)
     at weblogic.security.service.Auditor.writeEvent(Unknown Source)
     at com.bea.ld.server.audit.AuditDispatcher.doDispatch(AuditDispatcher.java:100)
     at com.bea.ld.server.audit.AuditDispatcher.run(AuditDispatcher.java:84)
     at java.lang.Thread.run(Thread.java:619)
java.lang.Exception: Audit Profiler not initialized properly
     at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:99)
     at com.bea.common.security.internal.legacy.service.AuditChannelImpl$V1Adapter.writeEvent(AuditChannelImpl.java:103)
     at com.bea.common.security.internal.service.AuditServiceImpl.writeEvent(AuditServiceImpl.java:83)
     at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy7.writeEvent(Unknown Source)
     at weblogic.security.service.Auditor.writeEvent(Unknown Source)
     at com.bea.ld.server.audit.AuditDispatcher.doDispatch(AuditDispatcher.java:100)
     at com.bea.ld.server.audit.AuditDispatcher.run(AuditDispatcher.java:84)
     at java.lang.Thread.run(Thread.java:619)
java.lang.Exception: Audit Profiler not initialized properly
     at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:99)
     at com.bea.common.security.internal.legacy.service.AuditChannelImpl$V1Adapter.writeEvent(AuditChannelImpl.java:103)
     at com.bea.common.security.internal.service.AuditServiceImpl.writeEvent(AuditServiceImpl.java:83)
     at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy7.writeEvent(Unknown Source)
     at weblogic.security.service.Auditor.writeEvent(Unknown Source)
     at com.bea.ld.server.audit.AuditDispatcher.doDispatch(AuditDispatcher.java:100)
     at com.bea.ld.server.audit.AuditDispatcher.run(AuditDispatcher.java:84)
     at java.lang.Thread.run(Thread.java:619)
java.lang.Exception: Audit Profiler not initialized properly
     at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:99)
     at com.bea.common.security.internal.legacy.service.AuditChannelImpl$V1Adapter.writeEvent(AuditChannelImpl.java:103)
     at com.bea.common.security.internal.service.AuditServiceImpl.writeEvent(AuditServiceImpl.java:83)
     at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy7.writeEvent(Unknown Source)
     at weblogic.security.service.Auditor.writeEvent(Unknown Source)
     at com.bea.ld.server.audit.AuditDispatcher.doDispatch(AuditDispatcher.java:100)
     at com.bea.ld.server.audit.AuditDispatcher.run(AuditDispatcher.java:84)
     at java.lang.Thread.run(Thread.java:619)
java.lang.Exception: Audit Profiler not initialized properly
     at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:99)
     at com.bea.common.security.internal.legacy.service.AuditChannelImpl$V1Adapter.writeEvent(AuditChannelImpl.java:103)
     at com.bea.common.security.internal.service.AuditServiceImpl.writeEvent(AuditServiceImpl.java:83)
     at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy7.writeEvent(Unknown Source)
     at weblogic.security.service.Auditor.writeEvent(Unknown Source)
     at com.bea.ld.server.audit.AuditDispatcher.doDispatch(AuditDispatcher.java:100)
     at com.bea.ld.server.audit.AuditDispatcher.run(AuditDispatcher.java:84)
     at java.lang.Thread.run(Thread.java:619)
java.lang.Exception: Audit Profiler not initialized properly
     at com.bea.dsp.audit.DSPProfilerProviderImpl.writeEvent(DSPProfilerProviderImpl.java:99)
     at com.bea.common.security.internal.legacy.service.AuditChannelImpl$V1Adapter.writeEvent(AuditChannelImpl.java:103)
     at com.bea.common.security.internal.service.AuditServiceImpl.writeEvent(AuditServiceImpl.java:83)
     at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy7.writeEvent(Unknown Source)
     at weblogic.security.service.Auditor.writeEvent(Unknown Source)
     at com.bea.ld.server.audit.AuditDispatcher.doDispatch(AuditDispatcher.java:100)
     at com.bea.ld.server.audit.AuditDispatcher.run(AuditDispatcher.java:84)
     at java.lang.Thread.run(Thread.java:619)

Similar Messages

Issue with Creating Forecast Profiles/Forecasting

Hello Experts,
We are facing an issue with creating forecast profiles.
We have two FYVs defined in our system, one with 52/53 fiscal weeks (Fiscal Variant W1) and the other with 12 fiscal months (FYV M1), Our storage buckets profile (STP) uses W1, since we have many dataviews that use W1 as the FYV in the attached Planning buckets profile(PBP). We also have dataviews that display in fiscal months (use FYV M1 in the attached PBP), data from Fiscal weeks will be aggregated and shown in Fiscal months . We need to do forecasting using FYV M1, that is forecast in Fiscal Months , but since the storage bucket profile has W1 which is used in the Planning Area config. We are unable to create any Forecast profiles with FYV M1 . Please note that we cannot use M1 in STP because when we used M1 in STP, we could not create dataviews in fiscal weeks (using W1)
1. Is there any way we can forecast using M1 while having assinged W1 to the Planning area/STP ?
2. OR we are willing to assing M1 to PA, provided we can use W1 in some of the dataviews, unfortunately we were unable to do this, though the vice versa is possible i,e. we could have W1 in STP and M1 in some of the related PBPs/ Weekly Dataviews.
Please let me know if any of these are possible or if there is any alternative way to do forecasting in Fisc Months.
Thanks
Tej

Hi,
You are correct, the Storage bucket profile always has to be at a detailed level. Time bucket profile can be at higher levels like monthly, quarterly etc.,
Coming to the root of your problem, which is you are unable to forecast at a level other that what is specified in your Storage bucket profile, unfortunately the answer is no.
You can do a forecast only at the level at which the data is stored and not at the level at which the data is viewed.
One work around for this is to create an additional planning area with the same MPOS and this addl PA can contain only those bare minimum KF required for your forecast. After you generate your forecast, you can copy it to your Weeks based PA and then proceed from there. This copy of KF between PA is much faster as it will happen at LC level and should not cause time delays.
NOTE - You have to exercise caution when you are using 2 periodicities i.e., weeks and months, if you are using standard SAP calendar then you are good to go. If you are creating custom Fiscal variants pls ensure the start and end of a month is same in both the weekly and monthly variants. Failing which, there will be mismatch of data between the two dataviews.
Hope this helps.
Thanks
Mani Suresh

VPP Distribution issues with OSX Server Profile Manager

Hi, I have a new issue with my OSX 10.9.5 Server. I use VPP to distribute apps to users devices, when I would add a new user I would send them an invitation message through /profilemanager . All was working well until recenetly , the message still arrives in the users mailbox however when you click the "sign in" link on the "receive apps and books from xxxxx" email instead of opening through the Mac App store app it now opens Safari and connects to the profile manager server , any ideas ? it never has done this before and although I thought it was a new feature or method I can not seem to resolve the issue.

Hi if when you are redirected back to your Mac Server you enter the user name and password of the user you are trying to receive VPP apps for i.e the Open Directory credentials it will then open the App Store providing the credentials are correctly entered so it looks like an additional layer of security. The process is click on the link in the VPP invite email, this takes you to your Mac Server profile manager, log on with your OD account, App store then opens on your Mac like it used to.

Network issue with initial connections on Hyper-V

This is the opposite of all the other networking issues I have seen with Hyper-V- anyone run into this?
I am running Hyper-V on a Server Core installation, and have had the same issue when I used Server 2012R2 as when I used Server 2008R2 on the same server as a virtual host. The server is an HP ProLiant DL360 Gen8 with 2x 8-core processors, 32 GB RAM. The
VM is sized and configured to stay within 1 NUMA node. It uses a single port of the 4-port HP/Broadcom 331 NIC, with all the TCP LSO settings disable at the switch, host, and guest, same with the power management settings. We have ProxyARP on the network,
so I have set the ArpRetryCount key to 0.
I have seen it happening with and without SR-IOV enabled. The guest OS is an RDS server, so for the sake of our CAL's it has to stay at Server 2008R2. I have set up a HOSTS file to mitigate this problem, as it seems to be a DNS issue- Here's what happens:
The first time I visit a resource, the server will timeout. An example not in our HOSTS file does this consistently: If I go to https://mail.mydomain.com/OutlookWebAccess, it spins for a couple of minutes before timing out. I hit refresh and the page loads
immediately. This server is colocated in-house, as is the mailserver. I'd say it is a DNS issue at some level, but I'd like to know what level it is- Is it just timing out trying to cache the DNS request, or is there a performance issue with a DNS server on
the network? (All of our DNS is AD-integrated running on DC's).
Here is where I'm seeing this:
Internet Explorer- described above
Salient Interactive Miner- at the login screen, it searches for a database and times out. If I go to the setup and enter the IP address, it still times out. It will not find the database server until I quit and restart the program. If this is the same issue,
it would obviously not be a DNS problem.
I DON'T see it in GP9 connecting to a datasource
Prior to setting up the HOSTS file, I saw this in Windows Explorer connecting to network shares on the same LAN segment.
This appears to only happen to the Hyper-V guest OS. As a best practice, whenever Windows Update runs, I update the Integration Components.
I have the bindings properly ordered on the guest VM, with the network adapter the goes to the physical NIC first, and IPv4 ordered before IPv6.
All updates are isntalled, and the firmware is at it's latest revision.
Any ideas?

Hi Daniel,
" This appears to only happen to the Hyper-V guest OS. "
Do you mean that any other hosts can access the network resource normally except these VMs ?
If yes , my suggestion is to disable the VMQ on the physical NIC for the VMs , then try test again .
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CS5 issues with mandatory roaming profiles

Hi,
I have seen lots of problems reported with using CS5 on networks with mandatory roaming profiles but not found any answers yet?
Has anyone managed to get it working yet?
We have gone to using standard network default profiles but it is not where we really want to be.
Regards
Darren

Dreamweaver is designed to work in a multi-user environment, and it creates a configuration folder for each user in that person's application data folder or library. You need to contact Adobe technical support if you need a different setup.

Issue with Data Access Profile

Hi Experts,
Facing issue while using Data Access Profiles:
I have created a data access profile ,giving access to only limited members for a particular model.
While logging in using a particular user id which is assigned to this data access profile I am able to see all the members for which the access is denied
and I am also able to manipulate the transaction data. But in data access profile I have provided only read access.
Recently,the system has been upgraded with a new support package after which we are facing the issue.
Please help us solving the issue.
BPC version: 10.0 NW
SP : 15
Best Regards,
Remya

Dear Ramya,
Again do the setting for data access profile. Sometime it will not refresh.
Regards,
Nanny

Cisco ISE 1.2.1 deplyomet issue with Anyconnect and Profiling

Hi All,
We are running cisco ise box in 1.2.1 version wherein I am facing below issue while deployment. We are having two ISE boxes where One box act as Primary Admin,Secondary MNT and Policy Service and Second Box act as Secondary Admin,Primary MNT and Policy Service
1) Profiling of Endpoints - HP Laster jet printer 55XX series and scanner profiling are not happing in Cisco ISE 1.2.1 wherein I have enabled below probes in ISE for profiling
RADIUS Probe
SNMP Probe SNMP Trap HTTP Prob and DNS
2) Any-connect issue - We are using any-connect supplicant 3.0.11042 for wired and wireless user profile in windows 7 enterprises 32 bit machine
- Yellow mark issue -  Once authentication , posturing completed we are getting yellow mark on network drive but still we are able to connect to network
- Network Map Drive issue -  Once authentication , posturing completed we are getting red cross mark on Network map drive and if we double click on that drive then its get accessible and red mark turns in to green.
For that we have already allowed Ip level access to all domain in before logon dacl ( Machine authentication )
That would be really great if any one can help me on the same.
Thanks & Regards
Pranav

Hi Pablo ,
Please find below solutions
Yellow mark issue - - HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NlaSvc\Parameters\Internet. This Service is by default disabled on Windows XP and Widows 8.X operating system. This is only enabled by default on Windows 7 and Windows Vista operating system.
Network Map Drive issue   - Create logon script and deploy it using group policy. Script will check full network connectivity and then map network drives
Regards
Pranav

Cross-platform issues with Initial View

When I specify my Initial View setting on Acrobat Pro (10.1.9) on my Mac, they are not honoured when the PDF is opened on a Windows machine. I've noticed this specifically with the Page Layout view. Any help would be appreciated.
Thanks.

Hi Bill.
I open the PDF in Acrobat Pro, then go to File > Properties (cmd + D), choose the Initial View tab and change the setting there. I then OK that and save the PDF. When I open the same PDF again on the Mac (in either Reader or Acrobat Pro) the settings I made are honoured. When I open the same PDF on a Windows machine, they're not.
J

Sql Server Connectivity issue with ODI Data Profiler

Hi all,
To profile data from SQL Server Data source, i had created a ODBC connection(using Windows NT authentication) in the system and it was successful. Created a connection with Type ODBC connection in Loader Connections along with System name, Port No and DSN Name. But while trying to connect the database it is throwing an error as Authentication Failed. Please guide me.

ODI's DP does not support the use of sourcing data on the ODBC data source. You must extract to a file, and use the file as the input.

CS5 washed colour issue with EIZO monitor profile

Really weird stuff going on.
At a customer site, we have LR3 and PS (CS5) running.
There are colour differences between what we see in Bridge and LR, and what CS5 displays, even though the colour space (Adboe RGB or ProPhoto) is the same and all other settings are correct (in colour settings and no soft proofing).
Strangely enough, when changing the monitor colour profile (in system prefs) to a non-EIZO one, LR3 and bridge immediately update, CS5 only when you click the window, and then everything looks the same (although not colour correct).
Chang back to the EIZO profile and the PS image looks washed, while the bridge and LR images look right.
The EIZO CG211 is calibrated using the Colour Navigator software.
Any idea's what might be the cause ? We'reabsolutely baffeled.
OpenGL is not active (as this is apparently not available anymore in CS5 'standard').
He used to be running on CS3 and LR2 and everything was fine.
We removed the CS3 as it was a suite (customer did only use Photoshop) and switched to Photoshop only.

Just to give an idea of the difference, I've attached a screenshot of both situations.
It does not matter wether I open the image using camera raw or using LR-> external edit.
Standard profile
EIZO profile

BPEL wsdl & issue with WS-I Profile check...

Hi all,
The .WSDL file corresponding to a BPEL always has an additional <partnerlinkType> element at the end.
This causes some tools that do a WS-I Profile check to report it as a failure to conform to standards (Of course, since it is an "extra" element NOT supposed to be there in a 'standard, portable' WSDL file..)
(How Can i ?!? and...)Can i manually remove this element..?!?
Or should i ignore this error/failure...?!?
What do you people suggest/follow..?!?
(Personally, i feel it should be there...)
Many Thanks..!

Thanks for some pointers...
But, i feel the Amazon/Google WSDL's do NOT have partnerlinkType elements in them simply (perhaps) because they represent "plain vanilla Web-services" & not BPEL processes.
The problem fer me is that when i develop & deploy a BPEL process, the associated WSDL for that process automatically/always has 1 or more partnerlinkType elements in it.
Kindly let me know your views on this, dear friends..
Thanks again...!!

Issue with Agent Profile from AM 70 OpenSSO interesting issue

Hi All,
I have a specific scenario and if it is not possible then ugrade from AM 7.0 to OpenSSO cant be true.
I have issue with the agent profiles (BTW I am not doing upgrade from AM 7.0 to OpenSSO but its a fresh OpenSSO install)
In AM 7.0 Agent profile is like this (below is the exact export from the AM 7.0)
dn: uid=Test-Agent,ou=agents,o=am
sunIdentityServerDeviceStatus: Active
uid: Test-Agent
objectClass: sunIdentityServerDevice
objectClass: iplanet-am-user-service
objectClass: top
objectClass: iPlanetPreferences
sunIdentityServerDeviceType: Agent
cn: default
sunIdentityServerDeviceVersion: 2.2
userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
Below is exact import into the OpenSSO (I created this LDIF using my script)
dn: ou=Test-Agent,ou=default,ou=OrganizationConfig,ou=1.0,ou=AgentService,ou=services,o=am
ou: Test-Agent
sunsmspriority: 0
sunserviceID: 2.2_Agent
sunKeyValue: sunIdentityServerDeviceStatus=Active
sunKeyValue: sunIdentityServerDeviceKeyValue=
sunKeyValue: description=
objectClass: sunServiceComponent
objectClass: top
sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
Now you can see the issue in AM 7.0 the password is stored as "userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" where by directory server userpassword is SSHA encrypted VS in opensso it is "sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" which OpenSSO doesnt like .. :)
If i create a Agent from the opensso Console then Agent create a password using AES encryption and and that works fine even when I import my above LDIF and update the password using the OpenSSO console it also works. The issues I have this I dont know all of the Agent clear text password and I only have the LDIF to work with. Any thought !! Please let me know I am stating to believe that the upgrade from AM 7.0 to OepnSSO will have the same issue which i have not tried yet.
Anythoughts or ideas are very welcome !
-Haris

Configuring the agent like this, ie importing a ldif file is not supported and can lead to unexpected results as you have observed. Just do it in a supported way and change the password for the agent if you don't know it. As the administrator you are supposed to know the password or have the power to reset it.

Color Profile issues with CS5

I´ve been having some issues with the color profiles since I´ve installed the CS5 on my laptop (Windows 7 ultimate).
To describe what I mean please see the images:
Every time I open Photoshop or Illustrator this message apppears:
so I hit ok, but I´m not sure if this affect the artworks that will be printed, I use the CMYK Mode but the colors does not match very well.
Hope you can help me
Thanks in advance,
Diana.

You have some serious reading up on color management to do... I strongly suggest you sift through the Illustrator/InDesign/Photoshop forums and the web in general. Short version: Using RGB profiles makes no sense whatsoever if you are working in CMYK but in reverse working in CMYK does not make sense if you are only printing at home/ displaying graphics on your own computer. Anyway, this is an infinitely complex topic, so realyl, do some reading and then ask more specific questions in the program-centric forums...
Mylenium

Having issues with profile manager on 10.9 loosing users/device assignments.

I'm having issues with profile manager on 10.9 loosing users/device assignments. Luckly I only have arround 70 devices added so far. The first time it happened I thought it was just a freak thing, but it has just happened again. What I find weird is nothing on the server was changed, no devices added. So when this happens my users phones lose access to email, because I'm using variables, which rely on the user being assigned to the device. Anyone know how to fix this, and if not. Does anyone know how to backup and restore just profile manager in 10.9. Thanks.

I enabled all users in my AD "Domain Users" group access to "Profile Manager". I had also initially enabled "Profile Manager" access for a few individual users. Those users did not loss the device assignments. I'm not absolutely sure why/if allowing access for a group is causing this issue. Enabling access for each person would be very time consuming.... Maybe adding access to the individual users is importing that user into OD?

Issue with electronic mail address in profile

As a part of the conversion process, one of the electronic mail addresses I use was effectively 'burned in' to my profile. Clearly I can make it visible, or keep it hidden - but there is a problem. The public address I previously had listed for this purpose is not available - instead it's the private address that is displayed!
Think of it like this:
[email protected] [private address]
[email protected] [public address]
It was the public one previously visible - it's now the private one, currently set to hidden, which is the only one I can choose to display or hide. Can anything be done about this, or are we stuck with this 'converted' change to our profiles?

I appreciate the thought, and am sure that for some users this would be a sufficient tactic. Unfortunately, I have historically had issues with the interlocking but thoroughly unreliable process of changing ones basic identity at…
http://myinfo.apple.com
This is aggravated by the fact that I have four such identities - though I only use one here in Apple Discussions - with varying levels of access to ADC, GSX and other generally non-public areas at Apple. Managing them, including my .Mac ID, is at times a challenge, and I hesitate to do anything at all to upset the delicate balance. Unless the Discussions profiles revert to a primary private electronic mail address with a secondary optional 'public' address, I suppose I will just have to use the previously non-public address that became the sole available address following the conversion.
Thanks again for thinking about this, and offering a solution to the issue.

Issue with Initializing ODSI Profiler MBean.

Similar Messages

Maybe you are looking for